Shih-Ken Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shih-Ken Chen has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Amir Khajepour
Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, ON, Canada
4 shared publications - Alireza Kasaiezadeh
General Motors Company, Warren, USA
3 shared publications - Bakhtiar Litkouhi
General Motors Company, Warren, MI, USA
2 shared publications - Baris Fidan
Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, ON, Canada
2 shared publications - Ehsan Hashemi
Department of Mechanical Engineering, University of Alberta, Edmonton, AB T6G 1H9, Canada
2 shared publications - Alireza Kasaiezadeh
Department of Mechanical and Mechatronics, University of Waterloo, Waterloo, ON, Canada
1 shared publication
Latest Publications
- 19 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 71 (3) , 2721-2733
Multi-Actuation Controller for Performance Vehicles: Optimal Torque Allocation and Active Aerodynamic
A multi-actuation model predictive controller is designed to improve the stability of the performance vehicles during high-speed maneuvers. The actuators included in this study are four electric motors for the wheels and two active aerodynamic wings at the front and rear of the vehicle. The designed controller integrates optimal corner torque allocation with an optimal active aerodynamics control system. A model predictive control scheme is used to adjust the air wings angle of attack and optimize the corner torques. A high-level constraint adjustment module is added to the controller to observe nonlinear tire behavior and optimize aerodynamic wings activation as required. Nonlinear tire behavior and actuator dynamics are considered and included in the prediction model. The controller performance is verified in simulation with MATLAB/Simulink and CarSim.
- 19 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 71 (3) , 2721-2733
Multi-Actuation Controller for Performance Vehicles: Optimal Torque Allocation and Active Aerodynamic
A multi-actuation model predictive controller is designed to improve the stability of the performance vehicles during high-speed maneuvers. The actuators included in this study are four electric motors for the wheels and two active aerodynamic wings at the front and rear of the vehicle. The designed controller integrates optimal corner torque allocation with an optimal active aerodynamics control system. A model predictive control scheme is used to adjust the air wings angle of attack and optimize the corner torques. A high-level constraint adjustment module is added to the controller to observe nonlinear tire behavior and optimize aerodynamic wings activation as required. Nonlinear tire behavior and actuator dynamics are considered and included in the prediction model. The controller performance is verified in simulation with MATLAB/Simulink and CarSim.
- 11 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 25 (6) , 2789-2800
Vehicle Stability Control: Model Predictive Approach and Combined-Slip Effect
This paper presents a model predictive vehicle stability controller that considers tire force nonlinearities and the combined-slip effect. Loss of cornering forces caused by increased longitudinal slip and changes in the slip angle due to the vehicle lateral response are considered in the prediction model of the controller. The developed controller adjusts tire slip ratios based on forces of the front and rear axles, monitors tire capacities and normal forces, and exhibits excellent performance in maintaining lateral responses within a stable region. The performance of the proposed predictive controller is assessed in software simulations as well as road experiments in various pure-slip and combined-slip driving scenarios and under different road friction conditions.
- 11 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 25 (6) , 2789-2800
Vehicle Stability Control: Model Predictive Approach and Combined-Slip Effect
This paper presents a model predictive vehicle stability controller that considers tire force nonlinearities and the combined-slip effect. Loss of cornering forces caused by increased longitudinal slip and changes in the slip angle due to the vehicle lateral response are considered in the prediction model of the controller. The developed controller adjusts tire slip ratios based on forces of the front and rear axles, monitors tire capacities and normal forces, and exhibits excellent performance in maintaining lateral responses within a stable region. The performance of the proposed predictive controller is assessed in software simulations as well as road experiments in various pure-slip and combined-slip driving scenarios and under different road friction conditions.
- 9 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 19 (7) , 2142-2148
Opinion Dynamics-Based Vehicle Velocity Estimation and Diagnosis
An opinion dynamics approach is proposed to enhance the reliability of the vehicle velocity estimators, which are required for autonomous driving as well as advanced vehicle active safety systems, such as traction and stability control. The corners' estimates of a velocity observer, which is formed by combining the kinematic and model-based estimation schemes, are used as opinions with different levels of confidence in the developed algorithm. This is to find more reliable estimates robust to disturbances and time delay via solving a convex optimization problem. To bypass the effect of failure in velocity estimation, a fault rejection policy is used concurrently with the opinion dynamics. Road tests confirm the validity and robustness of the algorithm on slippery and dry roads independent of the powertrain configuration in different driving scenarios, especially for combined-slip and low-excitation maneuvers, which are demanding for the current vehicle state estimators.
- 9 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 19 (7) , 2142-2148
Opinion Dynamics-Based Vehicle Velocity Estimation and Diagnosis
An opinion dynamics approach is proposed to enhance the reliability of the vehicle velocity estimators, which are required for autonomous driving as well as advanced vehicle active safety systems, such as traction and stability control. The corners' estimates of a velocity observer, which is formed by combining the kinematic and model-based estimation schemes, are used as opinions with different levels of confidence in the developed algorithm. This is to find more reliable estimates robust to disturbances and time delay via solving a convex optimization problem. To bypass the effect of failure in velocity estimation, a fault rejection policy is used concurrently with the opinion dynamics. Road tests confirm the validity and robustness of the algorithm on slippery and dry roads independent of the powertrain configuration in different driving scenarios, especially for combined-slip and low-excitation maneuvers, which are demanding for the current vehicle state estimators.
- 1 October 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 64 (8) , 3359-3367
Torque-Vectoring-Based Vehicle Control Robust to Driver Uncertainties
Driver-in-the-loop stability is a central issue in vehicle control systems. However, since a general human behavior model to explore it in a quantitative fashion has been lacking, little is known about how the vehicle can be controlled while considering the driver effects. Indeed, applying a control method without considering the driver effects, and instead separating human level and machine dynamic layers, guaranteeing stability of a vehicle, is impossible. Here, a new formulation of the problem that involves a driver model and a linear vehicle model is proposed. Given that practical controllers usually do not have access to the future road preview data, this information is also modeled in terms of bounded uncertainties. The design allows the tools of robust control to stabilize the system, offering an implementable approach to overcome ranges of delay and uncertainties of closed-loop modeling due to the human presence. The formulation can further deepen the understanding of the effects of a driver during vehicle steering. To evaluate the proposed controller, a nonlinear full vehicle model along with a driver model in CarSim are used. The simulations performed for a standard harsh double-lane-change scenario under different driver and vehicle conditions demonstrate that vehicle stability is enhanced using the proposed controller.
- 1 October 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 64 (8) , 3359-3367
Torque-Vectoring-Based Vehicle Control Robust to Driver Uncertainties
Driver-in-the-loop stability is a central issue in vehicle control systems. However, since a general human behavior model to explore it in a quantitative fashion has been lacking, little is known about how the vehicle can be controlled while considering the driver effects. Indeed, applying a control method without considering the driver effects, and instead separating human level and machine dynamic layers, guaranteeing stability of a vehicle, is impossible. Here, a new formulation of the problem that involves a driver model and a linear vehicle model is proposed. Given that practical controllers usually do not have access to the future road preview data, this information is also modeled in terms of bounded uncertainties. The design allows the tools of robust control to stabilize the system, offering an implementable approach to overcome ranges of delay and uncertainties of closed-loop modeling due to the human presence. The formulation can further deepen the understanding of the effects of a driver during vehicle steering. To evaluate the proposed controller, a nonlinear full vehicle model along with a driver model in CarSim are used. The simulations performed for a standard harsh double-lane-change scenario under different driver and vehicle conditions demonstrate that vehicle stability is enhanced using the proposed controller.
- 1 January 2008
- Published by ASME International
- p. 195-202
Autonomous Parking Strategy
Parallel parking can be a difficult task for novice drivers or drivers who seldom drive in congested city where parking space is limited. Parking Assist is an innovative system designed to aid the driver in performing sometimes difficult parallel parking maneuvers. Many companies are developing such systems with major automakers, such as Valeo, Aisin Seiki, Hella, Robert Bosch, and TRW. For example, Toyota IPA (Intelligent Parking Assist) system uses a rear view camera and automatically steer the vehicle into the parking spot with driver controlling braking. This paper describes the development of parking path planning strategies based on available parking space. A virtual turn center will first be defined and derived based on vehicle configuration. Required parking space for one or two cycle parking maneuver will then be determined. Path planning strategies for both one and two turn parking maneuvers will be developed next. Finally CarSim simulation will be performed to verify the design.
- 1 January 2008
- Published by ASME International
- p. 195-202
Autonomous Parking Strategy
Parallel parking can be a difficult task for novice drivers or drivers who seldom drive in congested city where parking space is limited. Parking Assist is an innovative system designed to aid the driver in performing sometimes difficult parallel parking maneuvers. Many companies are developing such systems with major automakers, such as Valeo, Aisin Seiki, Hella, Robert Bosch, and TRW. For example, Toyota IPA (Intelligent Parking Assist) system uses a rear view camera and automatically steer the vehicle into the parking spot with driver controlling braking. This paper describes the development of parking path planning strategies based on available parking space. A virtual turn center will first be defined and derived based on vehicle configuration. Required parking space for one or two cycle parking maneuver will then be determined. Path planning strategies for both one and two turn parking maneuvers will be developed next. Finally CarSim simulation will be performed to verify the design.
- 1 July 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in American Control Conference (ACC)
- No. 07431619,p. 1618-1623
Vehicle State Estimation for Roll Control System
Methods of estimating key vehicle states for roll stability control systems, including roll rate, roll angle, and lateral velocity, are investigated in this paper. Roll angle and roll rate estimators based on the two different vehicle models, 3-DOF (degree-of-freedom) and 1-DOF models, are evaluated and compared in both linear and non-linear regions using CarSim, a non-linear simulation software for vehicle dynamics control and integration. The effects of using roll rate sensor measurement in estimation are discussed. This paper also presents a new scheme of lateral velocity estimation, which compensates for errors in lateral acceleration and longitudinal speed measurements.
- 1 July 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in American Control Conference (ACC)
- No. 07431619,p. 1618-1623
Vehicle State Estimation for Roll Control System
Methods of estimating key vehicle states for roll stability control systems, including roll rate, roll angle, and lateral velocity, are investigated in this paper. Roll angle and roll rate estimators based on the two different vehicle models, 3-DOF (degree-of-freedom) and 1-DOF models, are evaluated and compared in both linear and non-linear regions using CarSim, a non-linear simulation software for vehicle dynamics control and integration. The effects of using roll rate sensor measurement in estimation are discussed. This paper also presents a new scheme of lateral velocity estimation, which compensates for errors in lateral acceleration and longitudinal speed measurements.