Katarzyna Szałapata
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Katarzyna Szałapata has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Anna Jarosz-Wilkołazka
Institute of Biological Sciences, Maria Curie-Skłodowska University, Akademicka 19, 20-031 Lublin, Poland
11 shared publications - Monika Osińska-Jaroszuk
Department of Biochemistry and Biotechnology, Institute of Biological Sciences, Maria Curie-Sklodowska University, Akademicka 19, 20-033 Lublin, Poland
10 shared publications - Marcin Grąz
Department of Biochemistry and Biotechnology, Institute of Biological Sciences, Maria Curie-Skłodowska University, Lublin, Poland
5 shared publications - Jolanta Polak
Department of Biochemistry and Biotechnology, Institute of Biological Sciences, Maria Curie-Skłodowska University, Akademicka 19, 20-033 Lublin, Poland
4 shared publications - Justyna Kapral-Piotrowska
Department of Functional Anatomy and Cytobiology, Institute of Biological Sciences, Maria Curie-Sklodowska University, Akademicka 19, 20-033 Lublin, Poland
4 shared publications - Magdalena Jaszek
Department of Biochemistry and Biotechnology, Institute of Biological Sciences, Maria Curie-Sklodowska University in Lublin, Akademicka 19, 20-033 Lublin, Poland
4 shared publications
Latest Publications
- Open Access
Novel Antimicrobial Composites Modified with Nanosilver, CuSO4, Benzethonium Chloride, and ZnO
The antibiotic and drug resistance of various bacterial and fungal strains poses a significant challenge to medicine and industry. The subject of numerous studies is how to limit the spread of microorganisms and biofilm formation on various surfaces. This research focuses on the antibacterial and antifungal properties of cross-linked methacrylate-based composites for specific applications. These composites were modified using 10 wt.% of compounds with scientifically proven antimicrobial properties. These include nanosilver, copper sulphate, benzethonium chloride, and zinc oxide. The antimicrobial potential against the following bacteria and fungi was determined: Gram-positive bacteria (Staphylococcus aureus); Gram-negative bacteria (Pseudomonas aeruginosa and Escherichia coli); and the pathogenic fungi Candida albicans and Aspergillus niger. Using the modified disc-diffusion method alongside a serial dilution method demonstrated an inhibitory effect on the viability and formation of bacterial and fungal biofilms. It was demonstrated that—in liquid cultures—composites containing benzethonium chloride inhibited the growth of P. aeruginosa by over 75%, more than 50% of E. coli and more than 70% of S. aureus. Growth inhibition of C. albicans exceeded 80% for selected composites (BPA.DM + NVP + CuSO4, BPA.DM + NVP + ZnO), while all composites inhibited the growth of A. niger by more than 45%, and in some cases (BPA.DM + HEMA + CuSO4, BPA.DM + HEMA + Ag, BPA.DM + MMA + Ag and BPA.DM + AEH + CuSO4) by more than 90%. Additionally, these composites significantly reduced biofilm formation on their surfaces. Modification with zinc oxide and benzethonium chloride resulted in materials that were non-toxic to normal human skin fibroblasts. To sum up the obtained results, it can be stated that these multifunctional materials with antibacterial properties could be used in medical devices, coatings, and other specialised applications where microbial contamination is a significant issue.
Open AccessNovel Antimicrobial Composites Modified with Nanosilver, CuSO4, Benzethonium Chloride, and ZnO
The antibiotic and drug resistance of various bacterial and fungal strains poses a significant challenge to medicine and industry. The subject of numerous studies is how to limit the spread of microorganisms and biofilm formation on various surfaces. This research focuses on the antibacterial and antifungal properties of cross-linked methacrylate-based composites for specific applications. These composites were modified using 10 wt.% of compounds with scientifically proven antimicrobial properties. These include nanosilver, copper sulphate, benzethonium chloride, and zinc oxide. The antimicrobial potential against the following bacteria and fungi was determined: Gram-positive bacteria (Staphylococcus aureus); Gram-negative bacteria (Pseudomonas aeruginosa and Escherichia coli); and the pathogenic fungi Candida albicans and Aspergillus niger. Using the modified disc-diffusion method alongside a serial dilution method demonstrated an inhibitory effect on the viability and formation of bacterial and fungal biofilms. It was demonstrated that—in liquid cultures—composites containing benzethonium chloride inhibited the growth of P. aeruginosa by over 75%, more than 50% of E. coli and more than 70% of S. aureus. Growth inhibition of C. albicans exceeded 80% for selected composites (BPA.DM + NVP + CuSO4, BPA.DM + NVP + ZnO), while all composites inhibited the growth of A. niger by more than 45%, and in some cases (BPA.DM + HEMA + CuSO4, BPA.DM + HEMA + Ag, BPA.DM + MMA + Ag and BPA.DM + AEH + CuSO4) by more than 90%. Additionally, these composites significantly reduced biofilm formation on their surfaces. Modification with zinc oxide and benzethonium chloride resulted in materials that were non-toxic to normal human skin fibroblasts. To sum up the obtained results, it can be stated that these multifunctional materials with antibacterial properties could be used in medical devices, coatings, and other specialised applications where microbial contamination is a significant issue.
- Open Access
- 6 January 2026
- Published by Walter de Gruyter GmbH in Pure and Applied Chemistry
- Vol. 98 (7) , 1211-1237
Zinc oxide-modified composites as a new antimicrobial coatings for application in biomedical industry – synthesis, thermal stability and antimicrobial properties
In recent years, the incidence of hospital-acquired infections has been increasing, which may be caused by the emergence of antibiotic-resistant bacteria. A solution to this problem may be the synthesis of composites containing the addition of compounds with antimicrobial properties, which can form a covering layer. They can limit the spread of bacteria and also reduce the formation of biofilm on the surface of equipment. The optimization of the polymer composition of methacrylate-based composites modified with zinc oxide was identified as the main objective of the research presented in this article. With the use of ATR/FT-IR technique, the structure and qualitative evaluation of the obtained composite materials were performed. The modified composites’ thermal resistance and decomposition process were also determined. The antimicrobial potential of the polymers against Gram-negative bacteria ( Pseudomonas aeruginosa ATCC 27853 and Escherichia coli ATCC 25922) and Gram-positive bacteria ( Staphylococcus aureus ATCC 25923) was determined with a modified disk diffusion method, the serial dilution method and the method with TTC. It was observed that incorporating zinc oxide into the structure of the described polymers significantly increased the antimicrobial potential of the composites and reduced bacterial biofilm formation on their surface. In the case of the effect of composite materials on P. aeruginosa , the largest zone of growth inhibition was determined for BPA.DM + AEH + 10 %ZnO, for E. coli , the largest zone of growth inhibition was 0.6 cm for BPA.DM + NVP + 10 %ZnO, and for S. aureus it was also 0.6 cm for BPA.DM + NVP + 10 %ZnO. Notably, all the materials exhibited antibacterial activity upon contact with bacterial cells. Assessing the percentage of bacterial growth inhibition revealed that had the greatest effect on P. aeruginosa was observed with BPA.DM + MMA + 10 % ZnO (49.7 % ± 0.5 % after 12 h and 49.9 % ± 2.1 % after 24 h) and BPA.DM + NVP + 10 % ZnO (62.4 % ± 2.4 % after 12 h). The other materials with the greatest effect on E. coli were BPA.DM + AEH (46.0 ± 3.1 % after 12 h and 48.0 ± 0.9 % after 24 h), BPA.DM + AEH + 10 % ZnO (46.7 ± 2.3 % after 12 h) and BPA.DM + NVP (53.5 ± 2.2 % after 24 h). Against S. aureus , the highest percentage of growth inhibition was determined for BPA.DM + MMA (56.3 % after 24 h), BPA.DM + HEMA (48.6 % after 24 h), and BPA.DM + NVP (47.9 % after 24 h).
- 6 January 2026
- Published by Walter de Gruyter GmbH in Pure and Applied Chemistry
- Vol. 98 (7) , 1211-1237
Open AccessZinc oxide-modified composites as a new antimicrobial coatings for application in biomedical industry – synthesis, thermal stability and antimicrobial properties
In recent years, the incidence of hospital-acquired infections has been increasing, which may be caused by the emergence of antibiotic-resistant bacteria. A solution to this problem may be the synthesis of composites containing the addition of compounds with antimicrobial properties, which can form a covering layer. They can limit the spread of bacteria and also reduce the formation of biofilm on the surface of equipment. The optimization of the polymer composition of methacrylate-based composites modified with zinc oxide was identified as the main objective of the research presented in this article. With the use of ATR/FT-IR technique, the structure and qualitative evaluation of the obtained composite materials were performed. The modified composites’ thermal resistance and decomposition process were also determined. The antimicrobial potential of the polymers against Gram-negative bacteria ( Pseudomonas aeruginosa ATCC 27853 and Escherichia coli ATCC 25922) and Gram-positive bacteria ( Staphylococcus aureus ATCC 25923) was determined with a modified disk diffusion method, the serial dilution method and the method with TTC. It was observed that incorporating zinc oxide into the structure of the described polymers significantly increased the antimicrobial potential of the composites and reduced bacterial biofilm formation on their surface. In the case of the effect of composite materials on P. aeruginosa , the largest zone of growth inhibition was determined for BPA.DM + AEH + 10 %ZnO, for E. coli , the largest zone of growth inhibition was 0.6 cm for BPA.DM + NVP + 10 %ZnO, and for S. aureus it was also 0.6 cm for BPA.DM + NVP + 10 %ZnO. Notably, all the materials exhibited antibacterial activity upon contact with bacterial cells. Assessing the percentage of bacterial growth inhibition revealed that had the greatest effect on P. aeruginosa was observed with BPA.DM + MMA + 10 % ZnO (49.7 % ± 0.5 % after 12 h and 49.9 % ± 2.1 % after 24 h) and BPA.DM + NVP + 10 % ZnO (62.4 % ± 2.4 % after 12 h). The other materials with the greatest effect on E. coli were BPA.DM + AEH (46.0 ± 3.1 % after 12 h and 48.0 ± 0.9 % after 24 h), BPA.DM + AEH + 10 % ZnO (46.7 ± 2.3 % after 12 h) and BPA.DM + NVP (53.5 ± 2.2 % after 24 h). Against S. aureus , the highest percentage of growth inhibition was determined for BPA.DM + MMA (56.3 % after 24 h), BPA.DM + HEMA (48.6 % after 24 h), and BPA.DM + NVP (47.9 % after 24 h).
- Open Access
Synthesis and Bioactive Properties of the Novel Coloured Compound Obtained via the Laccase-Mediated Transformation of 5-Aminosalicylic Acid
Biocatalysis processes based on oxidoreductases, such as fungal laccase, are important for discovering new organic compounds with broad structures and potential applications. They include bioactive compounds, which can be obtained through laccase-mediated oxidation of organic substrates having hydroxyl and/or amino groups especially, e.g., 5-aminosalicylic acid (5-ASA) is characterised for its potential for oxidation by a fungal laccase obtained from a Cerrena unicolor strain. The biotransformation process was optimised in terms of the buffer and co-solvent concentration, buffer pH value, and laccase activity. Selected crude dyes were analysed for their bioactive properties, toxicity, and suitability for the dyeing of wool fibres. The data obtained clearly indicated that a low concentration of the reaction buffer in the pH range from 5 to 6 and in the presence of 10% acetonitrile increased the rate of substrate oxidation and the amount of the product formed. The red-brown compound obtained via laccase-mediated oxidation of 5-aminosalicylic acid showed antioxidant properties and unique antimicrobial activity against Staphylococcus aureus and Staphylococcus epidermidis strains with the MIC value of 0.125 mg/mL detected for the purest dye. In addition, it was reported to have good wool fibre dyeing properties and no irritant effect after patch tests on a selected group with increased skin sensitivity.
Open AccessSynthesis and Bioactive Properties of the Novel Coloured Compound Obtained via the Laccase-Mediated Transformation of 5-Aminosalicylic Acid
Biocatalysis processes based on oxidoreductases, such as fungal laccase, are important for discovering new organic compounds with broad structures and potential applications. They include bioactive compounds, which can be obtained through laccase-mediated oxidation of organic substrates having hydroxyl and/or amino groups especially, e.g., 5-aminosalicylic acid (5-ASA) is characterised for its potential for oxidation by a fungal laccase obtained from a Cerrena unicolor strain. The biotransformation process was optimised in terms of the buffer and co-solvent concentration, buffer pH value, and laccase activity. Selected crude dyes were analysed for their bioactive properties, toxicity, and suitability for the dyeing of wool fibres. The data obtained clearly indicated that a low concentration of the reaction buffer in the pH range from 5 to 6 and in the presence of 10% acetonitrile increased the rate of substrate oxidation and the amount of the product formed. The red-brown compound obtained via laccase-mediated oxidation of 5-aminosalicylic acid showed antioxidant properties and unique antimicrobial activity against Staphylococcus aureus and Staphylococcus epidermidis strains with the MIC value of 0.125 mg/mL detected for the purest dye. In addition, it was reported to have good wool fibre dyeing properties and no irritant effect after patch tests on a selected group with increased skin sensitivity.
- Open Access
Attachment of Proteolytic Enzyme Inhibitors to Vascular Prosthesis—An Analysis of Binding and Antimicrobial Properties
Prosthetic infections are associated with high morbidity, mortality, and relapse rates, making them still a serious problem for implantology. Staphylococcus aureus is one of the most common bacterial pathogens causing prosthetic infections. In response to the increasing rate of bacterial resistance to commonly used antibiotics, this work proposes a method for combating pathogenic microorganisms by modifying the surfaces of synthetic polymeric biomaterials using proteolytic enzyme inhibitors (serine protease inhibitors—4-(2-aminoethyl)benzenesulfonyl fluoride hydrochloride and puromycin). While using techniques based on the immobilization of biologically active molecules, it is important to monitor the changes occurring on the surface of the modified biomaterial, where spectroscopic techniques (e.g., FTIR) are ideal. ATR-FTIR measurements demonstrated that the immobilization of both inhibitors caused large structural changes on the surface of the tested vascular prostheses (polyester or polytetrafluoroethylene) and showed that they were covalently bonded to the surfaces of the biomaterials. Next, the bactericidal and antibiofilm activities of the tested serine protease inhibitors were determined using the CLSM microscopic technique with fluorescent staining. During LIVE/DEAD analyses, a significant decrease in the formation of Staphylococcus aureus biofilm after exposure to selected concentrations of native inhibitors (0.02–0.06 mg/mL for puromycin and 0.2–1 mg/mL for 4-(2-aminoethyl)benzenesulfonyl fluoride hydrochloride) was demonstrated.
Open AccessAttachment of Proteolytic Enzyme Inhibitors to Vascular Prosthesis—An Analysis of Binding and Antimicrobial Properties
Prosthetic infections are associated with high morbidity, mortality, and relapse rates, making them still a serious problem for implantology. Staphylococcus aureus is one of the most common bacterial pathogens causing prosthetic infections. In response to the increasing rate of bacterial resistance to commonly used antibiotics, this work proposes a method for combating pathogenic microorganisms by modifying the surfaces of synthetic polymeric biomaterials using proteolytic enzyme inhibitors (serine protease inhibitors—4-(2-aminoethyl)benzenesulfonyl fluoride hydrochloride and puromycin). While using techniques based on the immobilization of biologically active molecules, it is important to monitor the changes occurring on the surface of the modified biomaterial, where spectroscopic techniques (e.g., FTIR) are ideal. ATR-FTIR measurements demonstrated that the immobilization of both inhibitors caused large structural changes on the surface of the tested vascular prostheses (polyester or polytetrafluoroethylene) and showed that they were covalently bonded to the surfaces of the biomaterials. Next, the bactericidal and antibiofilm activities of the tested serine protease inhibitors were determined using the CLSM microscopic technique with fluorescent staining. During LIVE/DEAD analyses, a significant decrease in the formation of Staphylococcus aureus biofilm after exposure to selected concentrations of native inhibitors (0.02–0.06 mg/mL for puromycin and 0.2–1 mg/mL for 4-(2-aminoethyl)benzenesulfonyl fluoride hydrochloride) was demonstrated.
- Open Access
- 22 December 2023
- Published by MDPI AG in Preprints.org
Attachment of Proteolytic Enzyme Inhibitors to Vascular Prosthesis – an Analysis of Binding and Antimicrobial Properties
Prosthetic infections are associated with high morbidity, mortality, and relapse rates making them still a serious problem for implantology. Staphylococcus aureus is one of the most common bacterial pathogens causing prosthetic infections. In response to the increasing rate of bacterial resistance to commonly used antibiotics, the work proposed a method of combating pathogenic microorganisms by modifying the surface of synthetic polymeric biomaterials using proteolytic enzyme inhibitors (serine protease inhibitors - 4-(2-aminoethyl)benzenesulfonyl fluoride hydrochloride and puromycin). While using techniques based on immobilization of biologically active molecules, it is important to monitor changes occurring on the surface of the modified biomaterial, where spectroscopic techniques (e.g. FTIR) are ideal. The ATR-FTIR measurements demonstrated that the immobilization of both inhibitors caused large structural changes on the surface of the tested vascular prostheses (polyester or polytetrafluoroethylene) and showed that they were covalently bonded to the surface of the biomaterials. Next, the bactericidal and antibiofilm activities of the tested serine protease inhibitors were determined using the CLSM microscopic technique with fluorescent staining. During LIVE/DEAD analyses, a significant decrease in the formation of Staphylococcus aureus biofilm after exposure to selected concentrations of native inhibitors (0.02-0.06 mg/mL for puromycin and 0.2-1 mg/mL for 4-(2-aminoethyl)benzenesulfonyl fluoride hydrochloride was demonstrated.
- 22 December 2023
- Published by MDPI AG in Preprints.org
Open AccessAttachment of Proteolytic Enzyme Inhibitors to Vascular Prosthesis – an Analysis of Binding and Antimicrobial Properties
Prosthetic infections are associated with high morbidity, mortality, and relapse rates making them still a serious problem for implantology. Staphylococcus aureus is one of the most common bacterial pathogens causing prosthetic infections. In response to the increasing rate of bacterial resistance to commonly used antibiotics, the work proposed a method of combating pathogenic microorganisms by modifying the surface of synthetic polymeric biomaterials using proteolytic enzyme inhibitors (serine protease inhibitors - 4-(2-aminoethyl)benzenesulfonyl fluoride hydrochloride and puromycin). While using techniques based on immobilization of biologically active molecules, it is important to monitor changes occurring on the surface of the modified biomaterial, where spectroscopic techniques (e.g. FTIR) are ideal. The ATR-FTIR measurements demonstrated that the immobilization of both inhibitors caused large structural changes on the surface of the tested vascular prostheses (polyester or polytetrafluoroethylene) and showed that they were covalently bonded to the surface of the biomaterials. Next, the bactericidal and antibiofilm activities of the tested serine protease inhibitors were determined using the CLSM microscopic technique with fluorescent staining. During LIVE/DEAD analyses, a significant decrease in the formation of Staphylococcus aureus biofilm after exposure to selected concentrations of native inhibitors (0.02-0.06 mg/mL for puromycin and 0.2-1 mg/mL for 4-(2-aminoethyl)benzenesulfonyl fluoride hydrochloride was demonstrated.
- Open Access
- 21 July 2023
- Published by MDPI AG in Journal of Functional Biomaterials
- Vol. 14 (7) , 383
Immobilisation of Cellobiose Dehydrogenase and Laccase on Chitosan Particles as a Multi-Enzymatic System for the Synthesis of Lactobionic Acid
Lactobionic acid (LBA) is a bioactive compound that has become increasingly popular in medicine in recent years due to its unique properties. This chemical can be formed via the enzymatic oxidation of lactose using fungal oxidoreductive enzymes. This study aimed to intensify the synthesis of LBA using immobilised enzymes (cellobiose dehydrogenase from Phanerochaete chrysosporium (PchCDH) and laccase from Cerrena unicolor (CuLAC)) on chitosan microspheres. We used three different crosslinking agents: genipin, glutaraldehyde, and polyethyleneimine to activate the chitosan. The FTIR and CellDrop techniques were used to characterise the activated microspheres. Quantitative (HPLC) and qualitative (TLC) methods were used to determine the obtained LBA. The results show that the type of activator used influences the efficiency of the binding of the enzyme to the matrix. Furthermore, the amount of LBA formed depends on the type of system used. The use of a system in which one of the enzymes is immobilised on a PEI-activated carrier (PchCDH) and the other is free (CuLAC) proved to be the most optimal, as it yielded almost 100% conversion of lactose to lactobionic acid. Summarising the data obtained the following: lactobionic acid immobilised on chitosan microspheres has great potential for medical applications.
- 21 July 2023
- Published by MDPI AG in Journal of Functional Biomaterials
- Vol. 14 (7) , 383
Open AccessImmobilisation of Cellobiose Dehydrogenase and Laccase on Chitosan Particles as a Multi-Enzymatic System for the Synthesis of Lactobionic Acid
Lactobionic acid (LBA) is a bioactive compound that has become increasingly popular in medicine in recent years due to its unique properties. This chemical can be formed via the enzymatic oxidation of lactose using fungal oxidoreductive enzymes. This study aimed to intensify the synthesis of LBA using immobilised enzymes (cellobiose dehydrogenase from Phanerochaete chrysosporium (PchCDH) and laccase from Cerrena unicolor (CuLAC)) on chitosan microspheres. We used three different crosslinking agents: genipin, glutaraldehyde, and polyethyleneimine to activate the chitosan. The FTIR and CellDrop techniques were used to characterise the activated microspheres. Quantitative (HPLC) and qualitative (TLC) methods were used to determine the obtained LBA. The results show that the type of activator used influences the efficiency of the binding of the enzyme to the matrix. Furthermore, the amount of LBA formed depends on the type of system used. The use of a system in which one of the enzymes is immobilised on a PEI-activated carrier (PchCDH) and the other is free (CuLAC) proved to be the most optimal, as it yielded almost 100% conversion of lactose to lactobionic acid. Summarising the data obtained the following: lactobionic acid immobilised on chitosan microspheres has great potential for medical applications.
- Open Access
Bioactive Properties of a Novel Antibacterial Dye Obtained from Laccase-Mediated Oxidation of 8-Anilino-1-naphthalenesulfonic Acid
Fungal laccase obtained from a Cerrena unicolor strain was used as an effective biocatalyst for the transformation of 8-anilino-1-naphthalenesulfonic acid into a green-coloured antibacterial compound, which can be considered as both an antimicrobial agent and a textile dye, simultaneously. The process of biosynthesis was performed in buffered solutions containing methanol as a co-solvent, allowing better solubilisation of substrate. The transformation process was optimised in terms of the buffer pH value, laccase activity, and concentrations of the substrate and co-solvent. The crude product obtained exhibited low cytotoxicity, antibacterial properties against Staphylococcus aureus and Staphylococcus epidermidis, and antioxidant properties. Moreover, the synthesised green-coloured compound proved non-allergenic and demonstrated a high efficiency of dyeing wool fibres.
Open AccessBioactive Properties of a Novel Antibacterial Dye Obtained from Laccase-Mediated Oxidation of 8-Anilino-1-naphthalenesulfonic Acid
Fungal laccase obtained from a Cerrena unicolor strain was used as an effective biocatalyst for the transformation of 8-anilino-1-naphthalenesulfonic acid into a green-coloured antibacterial compound, which can be considered as both an antimicrobial agent and a textile dye, simultaneously. The process of biosynthesis was performed in buffered solutions containing methanol as a co-solvent, allowing better solubilisation of substrate. The transformation process was optimised in terms of the buffer pH value, laccase activity, and concentrations of the substrate and co-solvent. The crude product obtained exhibited low cytotoxicity, antibacterial properties against Staphylococcus aureus and Staphylococcus epidermidis, and antioxidant properties. Moreover, the synthesised green-coloured compound proved non-allergenic and demonstrated a high efficiency of dyeing wool fibres.
- Open Access
- 17 March 2020
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 21 (6) , 2052
Structure and Bioactive Properties of Novel Textile Dyes Synthesised by Fungal Laccase
Novel sustainable processes involving oxidative enzymatic catalysts are considered as an alternative for classical organic chemistry. The unique physicochemical and bioactive properties of novel bio-products can be obtained using fungal laccase as catalyst. Among them are textile biodyes synthesised during oxidation of substrates belonging to the amine and methoxy organic derivatives. The process of synthesis occurs in mild conditions of pH, temperature, and pressure, and without using harmful oxidants. The effect of fungal laccase activity on the substrates mixture transformation efficiency was analysed in terms of antimicrobial dye synthesis on a large scale. Three new phenazine dyes, obtained in the presence of laccase from Cerrena unicolor, were studied for their structure and properties. The phenazine core structure of the products was a result of tri-molecular transformation of aminomethoxybenzoic acid and aminonaphthalene sulfonic acid isomers. One of the compounds from the synthesised dye, namely 10-((2-carboxy-6-methoxyphenyl)amino)-11-methoxybenzo[a]phenazine-8-carboxylic acid, was able to inhibit the growth of Staphylococcus aureus. The high concentration of substrates (5 g/L) was efficiently transformed during 72 h in the mild conditions of pH 4 with the use of laccase with an activity of 200 U per g of the substrates mixture. The new bioactive dye exhibited excellent dyeing properties with concomitant antibacterial and antioxidative activity. The proposed enzyme-mediated synthesis represents an alternative eco-friendly route for the synthesis of novel antimicrobial compounds with high importance for the medical textile industry.
- 17 March 2020
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 21 (6) , 2052
Open AccessStructure and Bioactive Properties of Novel Textile Dyes Synthesised by Fungal Laccase
Novel sustainable processes involving oxidative enzymatic catalysts are considered as an alternative for classical organic chemistry. The unique physicochemical and bioactive properties of novel bio-products can be obtained using fungal laccase as catalyst. Among them are textile biodyes synthesised during oxidation of substrates belonging to the amine and methoxy organic derivatives. The process of synthesis occurs in mild conditions of pH, temperature, and pressure, and without using harmful oxidants. The effect of fungal laccase activity on the substrates mixture transformation efficiency was analysed in terms of antimicrobial dye synthesis on a large scale. Three new phenazine dyes, obtained in the presence of laccase from Cerrena unicolor, were studied for their structure and properties. The phenazine core structure of the products was a result of tri-molecular transformation of aminomethoxybenzoic acid and aminonaphthalene sulfonic acid isomers. One of the compounds from the synthesised dye, namely 10-((2-carboxy-6-methoxyphenyl)amino)-11-methoxybenzo[a]phenazine-8-carboxylic acid, was able to inhibit the growth of Staphylococcus aureus. The high concentration of substrates (5 g/L) was efficiently transformed during 72 h in the mild conditions of pH 4 with the use of laccase with an activity of 200 U per g of the substrates mixture. The new bioactive dye exhibited excellent dyeing properties with concomitant antibacterial and antioxidative activity. The proposed enzyme-mediated synthesis represents an alternative eco-friendly route for the synthesis of novel antimicrobial compounds with high importance for the medical textile industry.
- Open Access
- 4 January 2020
- Published by MDPI AG in Biomolecules
- Vol. 10 (1) , 82
Serine Protease Inhibitors—New Molecules for Modification of Polymeric Biomaterials
Three serine protease inhibitors (AEBSF, soy inhibitor, α1-antitrypsin) were covalently immobilized on the surface of three polymer prostheses with the optimized method. The immobilization efficiency ranged from 11 to 51%, depending on the chosen inhibitor and biomaterial. The highest activity for all inhibitors was observed in the case of immobilization on the surface of the polyester Uni-Graft prosthesis, and the preparations obtained showed high stability in the environment with different pH and temperature values. Modification of the Uni-Graft prosthesis surface with the synthetic AEBSF inhibitor and human α1-antitrypsin inhibited the adhesion and multiplication of Staphylococcus aureus subs. aureus ATCC® 25923TM and Candida albicans from the collection of the Department of Genetics and Microbiology, UMCS. Optical profilometry analysis indicated that, after the immobilization process on the surface of AEBSF-modified Uni-Graft prostheses, there were more structures with a high number of protrusions, while the introduction of modifications with a protein inhibitor led to the smoothing of their surface.
- 4 January 2020
- Published by MDPI AG in Biomolecules
- Vol. 10 (1) , 82
Open AccessSerine Protease Inhibitors—New Molecules for Modification of Polymeric Biomaterials
Three serine protease inhibitors (AEBSF, soy inhibitor, α1-antitrypsin) were covalently immobilized on the surface of three polymer prostheses with the optimized method. The immobilization efficiency ranged from 11 to 51%, depending on the chosen inhibitor and biomaterial. The highest activity for all inhibitors was observed in the case of immobilization on the surface of the polyester Uni-Graft prosthesis, and the preparations obtained showed high stability in the environment with different pH and temperature values. Modification of the Uni-Graft prosthesis surface with the synthetic AEBSF inhibitor and human α1-antitrypsin inhibited the adhesion and multiplication of Staphylococcus aureus subs. aureus ATCC® 25923TM and Candida albicans from the collection of the Department of Genetics and Microbiology, UMCS. Optical profilometry analysis indicated that, after the immobilization process on the surface of AEBSF-modified Uni-Graft prostheses, there were more structures with a high number of protrusions, while the introduction of modifications with a protein inhibitor led to the smoothing of their surface.
- Open Access
- 1 June 2016
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Chemical Engineering
- Vol. 33 (2) , 251-260
NOVEL APPLICATION OF POROUS AND CELLULAR MATERIALS FOR COVALENT IMMOBILIZATION OF PEPSIN
Pepsin was immobilized via covalent bonds on different carriers: a silica gel carrier, acrylic beads, and a cellulose-based carrier - Granocel. All carriers were functionalized through the presence of -OH, -COOH, -NH2, or glycidyl groups on their surfaces. Three different cross-linkers were used for activation thereof. The results showed that Granocel activated by glutaraldehyde or carbodiimide and silica gel activated by glutaraldehyde were suitable carriers for the expression of enzyme activity. The optimum pH range for the native enzyme was 2.5-3.5 and this range was extended to the value 6.5 in the case of enzyme immobilized on the silica gel carrier and on Granocel. The optimum temperature values for the native and immobilized enzyme were in the range 37-40 °C and 40-50 °C, respectively. The activity of the immobilized pepsin at different values of pH and temperature was higher in comparison with the activity of the free enzyme.
- 1 June 2016
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Chemical Engineering
- Vol. 33 (2) , 251-260
Open AccessNOVEL APPLICATION OF POROUS AND CELLULAR MATERIALS FOR COVALENT IMMOBILIZATION OF PEPSIN
Pepsin was immobilized via covalent bonds on different carriers: a silica gel carrier, acrylic beads, and a cellulose-based carrier - Granocel. All carriers were functionalized through the presence of -OH, -COOH, -NH2, or glycidyl groups on their surfaces. Three different cross-linkers were used for activation thereof. The results showed that Granocel activated by glutaraldehyde or carbodiimide and silica gel activated by glutaraldehyde were suitable carriers for the expression of enzyme activity. The optimum pH range for the native enzyme was 2.5-3.5 and this range was extended to the value 6.5 in the case of enzyme immobilized on the silica gel carrier and on Granocel. The optimum temperature values for the native and immobilized enzyme were in the range 37-40 °C and 40-50 °C, respectively. The activity of the immobilized pepsin at different values of pH and temperature was higher in comparison with the activity of the free enzyme.