Enrique Arnoldo Zamora Cárdenas
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Enrique Arnoldo Zamora Cárdenas has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Alejandro Pizano-Martinez
Engineering Division, Campus Irapuato-Salamanca (DICIS), University of Guanajuato, Carr. Salamanca-Valle de Santiago km 3.5 + 1.5 km, Com. Palo Blanco, Salamanca 36885, Mexico
6 shared publications - Claudio Rubén Fuerte Esquivel
Electrical Engineering Faculty, Universidad Michoacana de San Nicolás de Hidalgo, Morelia, México
3 shared publications - Jose Merced Lozano-Garcia
Engineering Division, Campus Irapuato-Salamanca (DICIS), University of Guanajuato, Carr. Salamanca-Valle de Santiago km 3.5 + 1.5 km, Com. Palo Blanco, Salamanca 36885, Mexico
3 shared publications - Víctor Javier Gutiérrez-Martínez
Department of Electrical Engineering, University of Guanajuato, Salamanca 36787, Mexico
3 shared publications - Miguel A. Gomez-Martinez
Department of Electrical Engineering, University of Guanajuato, Salamanca 36787, Mexico
2 shared publications - Miguel Ángel Chavez Cornejo
Verano De la Ciencia Evaluación y análisis de un de monitoreo en redes de diferentes dimensiones Universidad de Guanajuato buses de inyección cero
2 shared publications
Latest Publications
- 1 October 2026
- Published by Elsevier in Electric Power Systems Research
- Vol. 265
A novel approach to optimal PMU placement for state estimation in electric power systems
- 1 October 2026
- Published by Elsevier in Electric Power Systems Research
- Vol. 265
A novel approach to optimal PMU placement for state estimation in electric power systems
- Open Access
- 24 November 2025
- Published by University of Guanajuato in Jóvenes en la Ciencia
- Vol. 37, 1-9
Evaluación y análisis de un modelo propuesto de optimización para la ubicación óptima de unidades de medición fasorial en sistemas eléctricos de potencia
Este reporte de investigación presenta la evaluación y análisis de un modelo de optimización para la ubicación óptima de unidades de medición fasorial en redes eléctricas. El problema es formulado como un problema de optimización y resuelto mediante el método de programación lineal entera. Para evaluar la robustez y escalabilidad del algoritmo, se diseñan cinco casos de estudio basados en los sistemas de 14, 24, 30, 57 y 118 nodos del IEEE. En cada escenario se modifica el planteamiento de las restricciones de desigualdad con el fin de investigar cómo la consideración de dichas restricciones impacta en la cantidad mínima de PMU requerida y la redundancia de medición. Los resultados permiten identificar a través de las soluciones óptimas y desde un punto de vista económico, las alternativas más efectivas para una planificación eficiente de los sistemas de monitoreo en redes de diferentes dimensiones.
- 24 November 2025
- Published by University of Guanajuato in Jóvenes en la Ciencia
- Vol. 37, 1-9
Open AccessEvaluación y análisis de un modelo propuesto de optimización para la ubicación óptima de unidades de medición fasorial en sistemas eléctricos de potencia
Este reporte de investigación presenta la evaluación y análisis de un modelo de optimización para la ubicación óptima de unidades de medición fasorial en redes eléctricas. El problema es formulado como un problema de optimización y resuelto mediante el método de programación lineal entera. Para evaluar la robustez y escalabilidad del algoritmo, se diseñan cinco casos de estudio basados en los sistemas de 14, 24, 30, 57 y 118 nodos del IEEE. En cada escenario se modifica el planteamiento de las restricciones de desigualdad con el fin de investigar cómo la consideración de dichas restricciones impacta en la cantidad mínima de PMU requerida y la redundancia de medición. Los resultados permiten identificar a través de las soluciones óptimas y desde un punto de vista económico, las alternativas más efectivas para una planificación eficiente de los sistemas de monitoreo en redes de diferentes dimensiones.
- Open Access
- 1 May 2025
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 26 (5) , 61-81
Plastic recycling for liquid fuel production and its use in thermal engines
Pyrolysis is a thermochemical degradation process that has become one of the most promising methods for converting plastic waste into valuable alternative fuels, offering a dual environmental benefit by reducing solid emissions. This review examines the advancements in pyrolysis over the past...
- 1 May 2025
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 26 (5) , 61-81
Open AccessPlastic recycling for liquid fuel production and its use in thermal engines
Pyrolysis is a thermochemical degradation process that has become one of the most promising methods for converting plastic waste into valuable alternative fuels, offering a dual environmental benefit by reducing solid emissions. This review examines the advancements in pyrolysis over the past...
- Open Access
Computing the Network’s Equilibrium Point at the Fault Clearing Instant in Transient Stability Studies
This paper proposes an approach for computing the network’s equilibrium point related to the fault clearing time in transient stability studies. The computation of this point is not a trivial task, particularly when the algebraic network’s equations are expressed in the power balance form. A natural attempt to solve this problem is using Newton’s method. However, convergence issues are found because of the lack of a general strategy for initializing nodal voltages at the clearing time. This problem has not been widely discussed in the existing literature and, therefore, is comprehensively analyzed in this paper. Furthermore, the paper proposes the use of a network’s model based on current injections and an extended admittance matrix to overcome the problem. This model is efficiently solved via the fixed-point iteration method, which involves factorization of the extended admittance matrix into the product of a lower triangular matrix [L] and an upper triangular matrix [U]. This solution executes a just once and only forward–backward substitution during the iterative solution process. Case studies clearly demonstrate the proposal’s effectiveness in computing the equilibrium point in operating conditions where Newton’s method fails to converge.
Open AccessComputing the Network’s Equilibrium Point at the Fault Clearing Instant in Transient Stability Studies
This paper proposes an approach for computing the network’s equilibrium point related to the fault clearing time in transient stability studies. The computation of this point is not a trivial task, particularly when the algebraic network’s equations are expressed in the power balance form. A natural attempt to solve this problem is using Newton’s method. However, convergence issues are found because of the lack of a general strategy for initializing nodal voltages at the clearing time. This problem has not been widely discussed in the existing literature and, therefore, is comprehensively analyzed in this paper. Furthermore, the paper proposes the use of a network’s model based on current injections and an extended admittance matrix to overcome the problem. This model is efficiently solved via the fixed-point iteration method, which involves factorization of the extended admittance matrix into the product of a lower triangular matrix [L] and an upper triangular matrix [U]. This solution executes a just once and only forward–backward substitution during the iterative solution process. Case studies clearly demonstrate the proposal’s effectiveness in computing the equilibrium point in operating conditions where Newton’s method fails to converge.
- Open Access
- 2 October 2024
- Published by University of Guanajuato in Jóvenes en la Ciencia
- Vol. 28
Estudio comparativo de la solución de mínimos-cuadrados para estimación de estado en sistemas de potencia
En esta investigación se presenta un estudio comparativo de tres estimadores de estado de sistemaseléctricos de potencia. Los estimadores se formularon como problema lineal de mínimos cuadradosponderados utilizando mediciones de unidades de medición fasorial (PMUs, por sus siglas en Ingles), lascuales nos permiten obtener mediciones sincronizadas y precisas de fasores de voltaje y corriente en tiemporeal. Para el estudio comparativo de los tres estimadores de estado se utilizaron los siguientes tres métodosde solución: a) Método de Ecuaciones Normales sin Restricciones; b) Método de Ecuaciones Normales conRestricciones; y c) Método de la Matriz Aumentada de Hachtel, los cuáles se comparan tanto en precisióncomo en velocidad cómputo mediante los errores de porcentaje medio absoluto de los valores estimados demagnitud y ángulo de fase, de los voltajes en el sistema de 14 nodos del IEEE y de los tiempos de CPU,respectivamente. Los diferentes métodos de solución de los tres estimadores de estado manejan en diferenteforma las mediciones virtuales de inyección de corrientes. Se presentan las deducciones de las tresmetodologías de solución de los estimadores lineales, así como las comparaciones de resultadosconsiderando esquemas de medición con y sin error de medición.
- 2 October 2024
- Published by University of Guanajuato in Jóvenes en la Ciencia
- Vol. 28
Open AccessEstudio comparativo de la solución de mínimos-cuadrados para estimación de estado en sistemas de potencia
En esta investigación se presenta un estudio comparativo de tres estimadores de estado de sistemaseléctricos de potencia. Los estimadores se formularon como problema lineal de mínimos cuadradosponderados utilizando mediciones de unidades de medición fasorial (PMUs, por sus siglas en Ingles), lascuales nos permiten obtener mediciones sincronizadas y precisas de fasores de voltaje y corriente en tiemporeal. Para el estudio comparativo de los tres estimadores de estado se utilizaron los siguientes tres métodosde solución: a) Método de Ecuaciones Normales sin Restricciones; b) Método de Ecuaciones Normales conRestricciones; y c) Método de la Matriz Aumentada de Hachtel, los cuáles se comparan tanto en precisióncomo en velocidad cómputo mediante los errores de porcentaje medio absoluto de los valores estimados demagnitud y ángulo de fase, de los voltajes en el sistema de 14 nodos del IEEE y de los tiempos de CPU,respectivamente. Los diferentes métodos de solución de los tres estimadores de estado manejan en diferenteforma las mediciones virtuales de inyección de corrientes. Se presentan las deducciones de las tresmetodologías de solución de los estimadores lineales, así como las comparaciones de resultadosconsiderando esquemas de medición con y sin error de medición.
- Open Access
Pressure Retarded Osmosis Power Units Modelling for Power Flow Analysis of Electric Distribution Networks
Pressure retarded osmosis (PRO) power units, which produce electrical energy from salinity gradient sources located at coastlines, are a technology still in the process of maturation; however, there is an expectation that this technology will need to be integrated into electrical distribution networks. Such integration will drive changes in the electric response of the distribution systems which may lead to harmful operating conditions. Power flow analysis is a tool used to reveal the steady-state operating condition of distribution systems and which could be extended to study and address the integration of PRO power units. To the best of the authors’ knowledge, such extension of power flow analysis has not yet been addressed in the literature. Accordingly, this paper comprehensively provides a model to evaluate the electric current and complex power produced by PRO power units. This model is directly embedded in the forward-backward sweep (FBS) method, extending the power flow analysis of electric distribution systems in this way so as to consider the integration of PRO power units. The resulting approach permits revealing of the steady-state operating response of distribution systems and the effects that may be driven by the integration of PRO power units, as corroborated through numerical results on a 14-node test distribution system.
Open AccessPressure Retarded Osmosis Power Units Modelling for Power Flow Analysis of Electric Distribution Networks
Pressure retarded osmosis (PRO) power units, which produce electrical energy from salinity gradient sources located at coastlines, are a technology still in the process of maturation; however, there is an expectation that this technology will need to be integrated into electrical distribution networks. Such integration will drive changes in the electric response of the distribution systems which may lead to harmful operating conditions. Power flow analysis is a tool used to reveal the steady-state operating condition of distribution systems and which could be extended to study and address the integration of PRO power units. To the best of the authors’ knowledge, such extension of power flow analysis has not yet been addressed in the literature. Accordingly, this paper comprehensively provides a model to evaluate the electric current and complex power produced by PRO power units. This model is directly embedded in the forward-backward sweep (FBS) method, extending the power flow analysis of electric distribution systems in this way so as to consider the integration of PRO power units. The resulting approach permits revealing of the steady-state operating response of distribution systems and the effects that may be driven by the integration of PRO power units, as corroborated through numerical results on a 14-node test distribution system.
- Open Access
- 10 April 2019
- Published by IntechOpen
Application of the Trajectory Sensitivity Theory to Small Signal Stability Analysis
The security assessment of power systems represents one of the principal studies that must be carried out in energy control centers. In this context, small-signal stability analysis is very important to determine the corresponding control strategies to improve security under stressed operating conditions of power systems. This chapter details a practical approach for assessing the stability of power system’s equilibrium points in real time based on the concept of trajectory sensitivity theory. This approach provides complementary information to that given by selective modal analysis: it determines how the state variables linked with the critical eigenvalues are affected by the system’s parameters and also determines the way of judging how the system’s parameters affect the oscillatory behavior of a power system. The WSCC 9-bus and a 190-buses equivalent system of the Mexican power system are used to demonstrate the generality of the approach as well as how its application in energy management systems is suitable for power system operation and control.
- 10 April 2019
- Published by IntechOpen
Open AccessApplication of the Trajectory Sensitivity Theory to Small Signal Stability Analysis
The security assessment of power systems represents one of the principal studies that must be carried out in energy control centers. In this context, small-signal stability analysis is very important to determine the corresponding control strategies to improve security under stressed operating conditions of power systems. This chapter details a practical approach for assessing the stability of power system’s equilibrium points in real time based on the concept of trajectory sensitivity theory. This approach provides complementary information to that given by selective modal analysis: it determines how the state variables linked with the critical eigenvalues are affected by the system’s parameters and also determines the way of judging how the system’s parameters affect the oscillatory behavior of a power system. The WSCC 9-bus and a 190-buses equivalent system of the Mexican power system are used to demonstrate the generality of the approach as well as how its application in energy management systems is suitable for power system operation and control.
- Open Access
A Heuristic Home Electric Energy Management System Considering Renewable Energy Availability
This paper presents the development of a heuristic-based algorithm for a Home Electric Energy Management System (HEEMS). The novelty of the proposal resides in the fact that solutions of the Pareto front, minimizing both the energy consumption and cost, are obtained by a Genetic Algorithm (GA) considering the renewable energy availability as well as the user activity level (AL) inside the house. The extensive solutions search characteristic of the GAs is seized to avoid the calculation of the full set of Pareto front solutions, i.e., from a reduced set of non-dominated solutions in the Pareto sense, an optimal solution with the best fitness is obtained, reducing considerably the computational time. The HEEMS considers models of the air conditioner, clothes dryer, dishwasher, electric stove, pool pump, and washing machine. Models of the wind turbine and solar PV modules are also included. The wind turbine model is written in terms of the generated active power exclusively dependent on the incoming wind profiles. The solar PV modules model accounts for environmental factors such as ambient temperature changes and irradiance profiles. The effect of the energy storage unit on the energy consumption and costs is evaluated adapting a model of the device considering its charge and discharge ramp rates. The proposed algorithm is implemented in the Matlab® platform and its validation is performed by comparing its results to those obtained by a freeware tool developed for the energy management of smart residential loads. Also, the evaluation of the performance of the proposed HEEMS is carried out by comparing its results to those obtained when the multi-objective optimization problem is solved considering weights assigned to each objective function. Results showed that considerable savings are obtained at reduced computational times. Furthermore, with the calculation of only one solution, the end-user interaction is reduced making the HEEMS even more manageable than previously proposed approaches.
Open AccessA Heuristic Home Electric Energy Management System Considering Renewable Energy Availability
This paper presents the development of a heuristic-based algorithm for a Home Electric Energy Management System (HEEMS). The novelty of the proposal resides in the fact that solutions of the Pareto front, minimizing both the energy consumption and cost, are obtained by a Genetic Algorithm (GA) considering the renewable energy availability as well as the user activity level (AL) inside the house. The extensive solutions search characteristic of the GAs is seized to avoid the calculation of the full set of Pareto front solutions, i.e., from a reduced set of non-dominated solutions in the Pareto sense, an optimal solution with the best fitness is obtained, reducing considerably the computational time. The HEEMS considers models of the air conditioner, clothes dryer, dishwasher, electric stove, pool pump, and washing machine. Models of the wind turbine and solar PV modules are also included. The wind turbine model is written in terms of the generated active power exclusively dependent on the incoming wind profiles. The solar PV modules model accounts for environmental factors such as ambient temperature changes and irradiance profiles. The effect of the energy storage unit on the energy consumption and costs is evaluated adapting a model of the device considering its charge and discharge ramp rates. The proposed algorithm is implemented in the Matlab® platform and its validation is performed by comparing its results to those obtained by a freeware tool developed for the energy management of smart residential loads. Also, the evaluation of the performance of the proposed HEEMS is carried out by comparing its results to those obtained when the multi-objective optimization problem is solved considering weights assigned to each objective function. Results showed that considerable savings are obtained at reduced computational times. Furthermore, with the calculation of only one solution, the end-user interaction is reduced making the HEEMS even more manageable than previously proposed approaches.
- 3 January 2019
- Published by Springer Nature in Journal of Electrical Engineering & Technology
- Vol. 14 (1) , 85-96
Optimal Dispatch Model for Demand Response Aggregators
- 3 January 2019
- Published by Springer Nature in Journal of Electrical Engineering & Technology
- Vol. 14 (1) , 85-96
Optimal Dispatch Model for Demand Response Aggregators