Weili Dai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Weili Dai has a total of 125 co-authors. Here are the top co-authors by number of shared publications:
Xubiao Luo
19 shared publicationsJianping Zou
17 shared publications- Yong Xu
Key Laboratory of Jiangxi Province for Persistent Pollutants Prevention Control and Resource Reuse, Nanchang Hangkong University, Nanchang 330063, PR China
14 shared publications Lixia Yang
Key Laboratory of Jiangxi Province for Persistent Pollutants Prevention Control and Resource Reuse, Nanchang Hangkong University, Nanchang, Jiangxi 330063, China
11 shared publicationsJie Zhang
Key Laboratory of Jiangxi Province for Persistent Pollutants Prevention Control and Resource Reuse
9 shared publicationsMan Zhang
9 shared publications
Latest Publications
- Open Access
- 4 May 2026
- Published by Elsevier in SSRN Electronic Journal
Building a highly active interface for modulating efficient dissociation of excitons and bolstering photocatalytic activity toward CO2 reduction
Layered structured materials mainly form excitons rather than carriers after being excited by light, and the utilization of excitons is crucial for low-dimensional photocatalysts. Herein, we corroborate that the robust excitonic effect of BiOCl, which is typical for dissociating into free carriers to participate in photoreduction of CO2, can be lessened by combination with BiO quantum dots (QDs) to ameliorate electronic structure and simultaneously form highly active interface with massive oxygen vacancies (Ov). The intimate combination between BiO and BiOCl triggers disordered redistributed band-edge states and energy gradient, promoting conversion of more excitons into electrons and holes. The interfacial Ov rapidly capture numerous electrons, thus enhancing electron density and CO2 adsorption capacity of adjacent Bi sites. Theoretically, calculation results indicate the energy barriers of rate-determining steps for the conversion of *CO2 to *COOH and the decomposition of H2O are significantly reduced at the two-phase interface. Ultimately, 2%BBOC harvests the highest catalytic ability, delivering a CO production rate of 51.1 μmol g–1, which is 18.2 times that of BiOCl. These findings open a new perspective for in-depth comprehending the enhance of photocatalytic activity via excitonic engineering, and provide a fresh insight in constructing interfacial defects.
- 4 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessBuilding a highly active interface for modulating efficient dissociation of excitons and bolstering photocatalytic activity toward CO2 reduction
Layered structured materials mainly form excitons rather than carriers after being excited by light, and the utilization of excitons is crucial for low-dimensional photocatalysts. Herein, we corroborate that the robust excitonic effect of BiOCl, which is typical for dissociating into free carriers to participate in photoreduction of CO2, can be lessened by combination with BiO quantum dots (QDs) to ameliorate electronic structure and simultaneously form highly active interface with massive oxygen vacancies (Ov). The intimate combination between BiO and BiOCl triggers disordered redistributed band-edge states and energy gradient, promoting conversion of more excitons into electrons and holes. The interfacial Ov rapidly capture numerous electrons, thus enhancing electron density and CO2 adsorption capacity of adjacent Bi sites. Theoretically, calculation results indicate the energy barriers of rate-determining steps for the conversion of *CO2 to *COOH and the decomposition of H2O are significantly reduced at the two-phase interface. Ultimately, 2%BBOC harvests the highest catalytic ability, delivering a CO production rate of 51.1 μmol g–1, which is 18.2 times that of BiOCl. These findings open a new perspective for in-depth comprehending the enhance of photocatalytic activity via excitonic engineering, and provide a fresh insight in constructing interfacial defects.
- 29 April 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (18) , 13391-13401
Electronic Metal–Support Interaction in Pt/Co 3 O 4 Enhanced Lattice Oxygen Activation and Replenishment for Photothermocatalytic VOC Oxidation
Noble-metal supported on transition-metal oxide (TMO) materials are promising catalysts for photothermocatalytic oxidation of volatile organic compounds (VOCs), but the catalytic roles of TMOs are usually overlooked. Herein, xPt/Co3O4 catalysts were designed for photothermocatalytic VOC oxidation, with a strong electronic metal–support interaction (EMSI) engineered between Pt nanoparticles and Co3O4 nanosheets. The EMSI induces partial electron transfer from Pt to Co3O4 through a well-defined interface, generating electron-deficient Pt and weakening Co–O bonds. Consequently, the mobility and reactivity of lattice oxygen in Co3O4 were promoted. As for 1.0Pt/Co3O4, most bulk lattice oxygen in Co3O4 can efficiently migrate to the surface to participate in the photothermocatalytic oxidation of VOCs, and subsequently be replenished by activated gaseous oxygen. Meanwhile, positively charged Pt significantly promotes the activation of toluene by adsorbing toluene molecules and accepting electrons from the aromatic ring. As a result, 1.0Pt/Co3O4 achieves complete toluene conversion and an 84% CO2 yield under continuous reaction conditions with a low illumination intensity of 200 mW/cm2, without the requirement for an external heat source.
- 29 April 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (18) , 13391-13401
Electronic Metal–Support Interaction in Pt/Co 3 O 4 Enhanced Lattice Oxygen Activation and Replenishment for Photothermocatalytic VOC Oxidation
Noble-metal supported on transition-metal oxide (TMO) materials are promising catalysts for photothermocatalytic oxidation of volatile organic compounds (VOCs), but the catalytic roles of TMOs are usually overlooked. Herein, xPt/Co3O4 catalysts were designed for photothermocatalytic VOC oxidation, with a strong electronic metal–support interaction (EMSI) engineered between Pt nanoparticles and Co3O4 nanosheets. The EMSI induces partial electron transfer from Pt to Co3O4 through a well-defined interface, generating electron-deficient Pt and weakening Co–O bonds. Consequently, the mobility and reactivity of lattice oxygen in Co3O4 were promoted. As for 1.0Pt/Co3O4, most bulk lattice oxygen in Co3O4 can efficiently migrate to the surface to participate in the photothermocatalytic oxidation of VOCs, and subsequently be replenished by activated gaseous oxygen. Meanwhile, positively charged Pt significantly promotes the activation of toluene by adsorbing toluene molecules and accepting electrons from the aromatic ring. As a result, 1.0Pt/Co3O4 achieves complete toluene conversion and an 84% CO2 yield under continuous reaction conditions with a low illumination intensity of 200 mW/cm2, without the requirement for an external heat source.
- Open Access
- 6 March 2026
- Published by Elsevier in SSRN Electronic Journal
Building a highly active interface for modulating efficient dissociation of excitons and bolstering photocatalytic activity toward CO2 reduction
Layered structured materials mainly form excitons rather than carriers after being excited by light, and the utilization of excitons is crucial for low-dimensional photocatalysts. Herein, we corroborate that the robust excitonic effect of BiOCl, which is typical for dissociating into free carriers to participate in photoreduction of CO2, can be lessened by combination with BiO quantum dots (QDs) to ameliorate electronic structure and simultaneously form highly active interface with massive oxygen vacancies (Ov). The intimate combination between BiO and BiOCl triggers disordered redistributed band-edge states and energy gradient, promoting conversion of more excitons into electrons and holes. The interfacial Ov rapidly capture numerous electrons, thus enhancing electron density and CO2 adsorption capacity of adjacent Bi sites. Theoretically, calculation results indicate the energy barriers of rate-determining steps for the conversion of *CO2 to *COOH and the decomposition of H2O are significantly reduced at the two-phase interface. Ultimately, 2%BBOC harvests the highest catalytic ability, delivering a CO production rate of 51.1 μmol g–1, which is 18.2 times that of BiOCl. These findings open a new perspective for in-depth comprehending the enhance of photocatalytic activity via excitonic engineering, and provide a fresh insight in constructing interfacial defects.
- 6 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessBuilding a highly active interface for modulating efficient dissociation of excitons and bolstering photocatalytic activity toward CO2 reduction
Layered structured materials mainly form excitons rather than carriers after being excited by light, and the utilization of excitons is crucial for low-dimensional photocatalysts. Herein, we corroborate that the robust excitonic effect of BiOCl, which is typical for dissociating into free carriers to participate in photoreduction of CO2, can be lessened by combination with BiO quantum dots (QDs) to ameliorate electronic structure and simultaneously form highly active interface with massive oxygen vacancies (Ov). The intimate combination between BiO and BiOCl triggers disordered redistributed band-edge states and energy gradient, promoting conversion of more excitons into electrons and holes. The interfacial Ov rapidly capture numerous electrons, thus enhancing electron density and CO2 adsorption capacity of adjacent Bi sites. Theoretically, calculation results indicate the energy barriers of rate-determining steps for the conversion of *CO2 to *COOH and the decomposition of H2O are significantly reduced at the two-phase interface. Ultimately, 2%BBOC harvests the highest catalytic ability, delivering a CO production rate of 51.1 μmol g–1, which is 18.2 times that of BiOCl. These findings open a new perspective for in-depth comprehending the enhance of photocatalytic activity via excitonic engineering, and provide a fresh insight in constructing interfacial defects.
- Open Access
- 3 March 2026
- Published by Elsevier in SSRN Electronic Journal
Oxygen vacancies and Au with plasma resonance jointly tailoring efficient dissociation of excitons to bolster photoreduction CO2 activity
Photogenerated carriers are one of the cores of photocatalysis, however, layered structural materials mainly form excitons after being excited by light due to lack of one dimension, while the utilization of excitons is crucial for low-dimensional photocatalysts. Herein, the strong excitonic effect in BiOCl can be reduced via photodeposition of Au, accompanied by formation of additional oxygen vacancies (Ov). It can break the uniformity of electronic structure, lower exciton binding energy (Eb) and promote efficient dissociation of excitons into free carriers. Besides, the loading of Au with plasma resonance can dramatically improve light absorption capacity and generate additional electrons. Based on above advantages, as well as analysis through XPS, electrochemical testing, fluorescence and Bader charge, it is known that photo-induced electrons efficiently migrate to Bi sites adjacent to Ov, increasing electron density and facilitating subsequent CO2 activation and hydrogenation reduction. Resultly, 0.8%Au/BOC harvests the highest catalytic performance, delivering a CO production rate of 18.7 μmol g–1, which has 6.2 times the catalytic activity of BOC. By combining advanced characterization and computational modeling, we reveal the introduction of Au and more Ov help to reduce the energy barrier of rate-determining step, and thus improving the reduction rate.
- 3 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessOxygen vacancies and Au with plasma resonance jointly tailoring efficient dissociation of excitons to bolster photoreduction CO2 activity
Photogenerated carriers are one of the cores of photocatalysis, however, layered structural materials mainly form excitons after being excited by light due to lack of one dimension, while the utilization of excitons is crucial for low-dimensional photocatalysts. Herein, the strong excitonic effect in BiOCl can be reduced via photodeposition of Au, accompanied by formation of additional oxygen vacancies (Ov). It can break the uniformity of electronic structure, lower exciton binding energy (Eb) and promote efficient dissociation of excitons into free carriers. Besides, the loading of Au with plasma resonance can dramatically improve light absorption capacity and generate additional electrons. Based on above advantages, as well as analysis through XPS, electrochemical testing, fluorescence and Bader charge, it is known that photo-induced electrons efficiently migrate to Bi sites adjacent to Ov, increasing electron density and facilitating subsequent CO2 activation and hydrogenation reduction. Resultly, 0.8%Au/BOC harvests the highest catalytic performance, delivering a CO production rate of 18.7 μmol g–1, which has 6.2 times the catalytic activity of BOC. By combining advanced characterization and computational modeling, we reveal the introduction of Au and more Ov help to reduce the energy barrier of rate-determining step, and thus improving the reduction rate.
- Top Cited PapersOpen Access
- 2 January 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (1) , eadz7504
Janus Mn single atoms for triggering efficient photothermal catalytic CO 2 methanation through spin polarization effect
Photothermal catalysis, using sunlight as single energy source, is an ideal pattern for CO 2 reduction. Herein, Mn single atoms (SAs) are constructed on the surface of NNSO, which induces spin polarization effect, thus promoting directional transfer of photothermal electrons, and improving electron density of Mn sites and adsorption ability of CO 2 . Meanwhile, Mn SAs act as new active sites enhancing the adsorption of intermediate * CO, thus suppressing CO production, lowering energy barriers of hydrogenation, and changing the reaction path. In addition, the hydrogen overflow energy barriers decrease under the effect of spin polarization, promoting the rapid transfer of active H from Ni atoms to Mn SAs. As a result, the rate of CO 2 methanation is 195.7 millimoles per gram per hour with near-unity selectivity, and the catalytic activity of 1.0%Mn/NNSO increases by approximately 140 times compared with NNSO. To our knowledge, this is the first study that uses the spin polarization effect to achieve efficient photothermal CO 2 methanation.
- 2 January 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (1) , eadz7504
Top Cited PapersOpen AccessJanus Mn single atoms for triggering efficient photothermal catalytic CO 2 methanation through spin polarization effect
Photothermal catalysis, using sunlight as single energy source, is an ideal pattern for CO 2 reduction. Herein, Mn single atoms (SAs) are constructed on the surface of NNSO, which induces spin polarization effect, thus promoting directional transfer of photothermal electrons, and improving electron density of Mn sites and adsorption ability of CO 2 . Meanwhile, Mn SAs act as new active sites enhancing the adsorption of intermediate * CO, thus suppressing CO production, lowering energy barriers of hydrogenation, and changing the reaction path. In addition, the hydrogen overflow energy barriers decrease under the effect of spin polarization, promoting the rapid transfer of active H from Ni atoms to Mn SAs. As a result, the rate of CO 2 methanation is 195.7 millimoles per gram per hour with near-unity selectivity, and the catalytic activity of 1.0%Mn/NNSO increases by approximately 140 times compared with NNSO. To our knowledge, this is the first study that uses the spin polarization effect to achieve efficient photothermal CO 2 methanation.
- 12 June 2024
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 673, 346-353
Selective exposure of (1 1 1) crystal plane in Pd49Ag30Te4 by Tb doping to weaken Pd − C bond and promote electroreduction of CO2 to CO
- 12 June 2024
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 673, 346-353
Selective exposure of (1 1 1) crystal plane in Pd49Ag30Te4 by Tb doping to weaken Pd − C bond and promote electroreduction of CO2 to CO