Abdelmajid Berdai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Abdelmajid Berdai has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
Anass Gourma
Lab Energy of Electrical Systems LESE, Team of Electrical Networks and Static Converters, Superior National School of Electricity and Mechanics (ENSEM), Hassan II University
3 shared publications- Jamal Boukherouaa
Hassan II University
3 shared publications - Moussa Reddak
Lab Energy of Electrical Systems LESE, Team of Electrical Networks and Static Converters, Superior National School of Electricity and Mechanics (ENSEM), Hassan II University
3 shared publications - Abdelaziz Belfqih
Hassan II University of Casablanca
2 shared publications Faissal El Mariami
National Higher School of Electricity and Mechanics (ENSEM)
2 shared publicationsMoussa Reddak
Lab Energy of Electrical systems, CED-ENSEM, Hassan II University, Casablanca, Morocco
2 shared publications
Latest Publications
- Open Access
- 1 February 2025
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 15 (1) , 99-113
Innovative power sharing and secondary controls for meshed microgrids
In alternating current (AC) microgrids, the prevalent approach for controlling the power distribution between generators and loads is droop control. This decentralized technique ensures accurate power sharing; however, its utility is restricted by significant drawbacks. Notably, in scenarios involving dissimilar power sources, mismatched impedance lines, or meshed microgrids, conventional droop control fails to ensure effective reactive power sharing among inverters, often leading to notable circulating currents. Hence, the primary objective of this paper is twofold: firstly, to examine limitations inherent to conventional droop control; secondly, to introduce a robust power-sharing methodology for AC microgrids. This novel approach is specifically designed to achieve consistent sharing of active and reactive power across meshed topology microgrids. The technique considers the presence of distributed power loads and the dynamic nature of the topology. Despite the attainment of satisfactory active and reactive power sharing, deviations in voltage and frequency occasionally manifest. To address this issue, a supplementary control mechanism is proposed as a third phase. This secondary control method focuses on reinstating the microgrid's voltage and frequency to rated values, all while upholding the precision of power sharing. The efficacy of this multi-stage methodology is rigorously validated through simulations using MATLAB/Simulink and practical experimentations.
- 1 February 2025
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 15 (1) , 99-113
Open AccessInnovative power sharing and secondary controls for meshed microgrids
In alternating current (AC) microgrids, the prevalent approach for controlling the power distribution between generators and loads is droop control. This decentralized technique ensures accurate power sharing; however, its utility is restricted by significant drawbacks. Notably, in scenarios involving dissimilar power sources, mismatched impedance lines, or meshed microgrids, conventional droop control fails to ensure effective reactive power sharing among inverters, often leading to notable circulating currents. Hence, the primary objective of this paper is twofold: firstly, to examine limitations inherent to conventional droop control; secondly, to introduce a robust power-sharing methodology for AC microgrids. This novel approach is specifically designed to achieve consistent sharing of active and reactive power across meshed topology microgrids. The technique considers the presence of distributed power loads and the dynamic nature of the topology. Despite the attainment of satisfactory active and reactive power sharing, deviations in voltage and frequency occasionally manifest. To address this issue, a supplementary control mechanism is proposed as a third phase. This secondary control method focuses on reinstating the microgrid's voltage and frequency to rated values, all while upholding the precision of power sharing. The efficacy of this multi-stage methodology is rigorously validated through simulations using MATLAB/Simulink and practical experimentations.
- Open Access
- 19 February 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (4) , 2243
New Decentralized Control of Mesh AC Microgrids: Study, Stability, and Robustness Analysis
In this paper, we investigated the power sharing issues in mesh islanded microgrids that contain several distributed generators (DGs) and loads connected to different points of common coupling (PCC). Firstly, an improved decentralized droop control algorithm is proposed to achieve the active and reactive power sharing of different DGs in reconfigurable mesh islanded microgrids. Accurate power sharing was obtained even though line parameters or the mesh microgrid configuration were unknown. Secondly a state-space model of the whole mesh microgrid was developed, considering several generators with their decentralized controllers, line feeders, and dynamic loads. This model was used to design parameters of droop controllers, to study the asymptotic stability and the robustness properties of the system. All strategies and analyses were validated by simulation based on the generic microgrid detailed in the standard IEEE 9bus test feeder.
- 19 February 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (4) , 2243
Open AccessNew Decentralized Control of Mesh AC Microgrids: Study, Stability, and Robustness Analysis
In this paper, we investigated the power sharing issues in mesh islanded microgrids that contain several distributed generators (DGs) and loads connected to different points of common coupling (PCC). Firstly, an improved decentralized droop control algorithm is proposed to achieve the active and reactive power sharing of different DGs in reconfigurable mesh islanded microgrids. Accurate power sharing was obtained even though line parameters or the mesh microgrid configuration were unknown. Secondly a state-space model of the whole mesh microgrid was developed, considering several generators with their decentralized controllers, line feeders, and dynamic loads. This model was used to design parameters of droop controllers, to study the asymptotic stability and the robustness properties of the system. All strategies and analyses were validated by simulation based on the generic microgrid detailed in the standard IEEE 9bus test feeder.
- Open Access
- 1 August 2020
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 10 (4) , 3412-3422
Active power ouptut optimization for wind farms and thermal units by minimizing the operating cost and emissions
In recent years, many works have been done in order to discuss economic dispatch in which wind farms are installed in electrical grids in addition to conventional power plants. Nevertheless, the emissions caused by fossil fuels have not been considered in most of the studies done before. In fact, thermal power plants produce important quantities of emissions for instance, carbon dioxide (CO2) and sulphur dioxide (SO2) that are harmful to the environment. This paper presents an optimization algorithm with the objective to minimize the emission levels and the production cost. A comparison of the results obtained with different optimization methods leads us to opt for the grey wolf optimizer technique (GWO) to use for solving the proposed objective function. First, the method used to estimate the wind power of a plant is presented. Second, the economic dispatch models for wind and thermal generators are presented followed by the emission dispatch model for the thermal units.Then, the proposed objective function is formulated. Finally, the simulation results obtained by applying the GWO and other known optimization techniques are analysed and compared.
- 1 August 2020
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 10 (4) , 3412-3422
Open AccessActive power ouptut optimization for wind farms and thermal units by minimizing the operating cost and emissions
In recent years, many works have been done in order to discuss economic dispatch in which wind farms are installed in electrical grids in addition to conventional power plants. Nevertheless, the emissions caused by fossil fuels have not been considered in most of the studies done before. In fact, thermal power plants produce important quantities of emissions for instance, carbon dioxide (CO2) and sulphur dioxide (SO2) that are harmful to the environment. This paper presents an optimization algorithm with the objective to minimize the emission levels and the production cost. A comparison of the results obtained with different optimization methods leads us to opt for the grey wolf optimizer technique (GWO) to use for solving the proposed objective function. First, the method used to estimate the wind power of a plant is presented. Second, the economic dispatch models for wind and thermal generators are presented followed by the emission dispatch model for the thermal units.Then, the proposed objective function is formulated. Finally, the simulation results obtained by applying the GWO and other known optimization techniques are analysed and compared.
- 30 April 2018
- Published by Praise Worthy Prize in International Review on Modelling and Simulations (IREMOS)
- Vol. 11 (2) , 76
Reliability and Optimization Strategy in an Interconnected Network at a Wind Farm
Wind power plants are increasingly integrated into the power grid to reduce the environmental impact of conventional thermal power plants. Due to wind speed uncertainty, the problem of the intermittence and fluctuation of wind energy production causes a risk for interconnected electrical networks. Several papers try to solve this problem using various prediction methods. This paper presents the strategy of integrating a wind farm into an electrical network, based on the calculation of the electrical network parameters using the probabilistic distribution of wind. In order to validate the results obtained, the calculation of optimal power flow (OPF) is essential since it allows calculating the electrical energy flow between buses at a low cost and without the risk of grid disturbance. The solution to the OPF problem is implemented on MATLAB using the IEEE 24-bus standard electrical network. Copyright © 2018 Praise Worthy Prize - All rights reserved.
- 30 April 2018
- Published by Praise Worthy Prize in International Review on Modelling and Simulations (IREMOS)
- Vol. 11 (2) , 76
Reliability and Optimization Strategy in an Interconnected Network at a Wind Farm
Wind power plants are increasingly integrated into the power grid to reduce the environmental impact of conventional thermal power plants. Due to wind speed uncertainty, the problem of the intermittence and fluctuation of wind energy production causes a risk for interconnected electrical networks. Several papers try to solve this problem using various prediction methods. This paper presents the strategy of integrating a wind farm into an electrical network, based on the calculation of the electrical network parameters using the probabilistic distribution of wind. In order to validate the results obtained, the calculation of optimal power flow (OPF) is essential since it allows calculating the electrical energy flow between buses at a low cost and without the risk of grid disturbance. The solution to the OPF problem is implemented on MATLAB using the IEEE 24-bus standard electrical network. Copyright © 2018 Praise Worthy Prize - All rights reserved.
- Open Access
- 19 March 2018
- Published by Foundation of Computer Science in International Journal of Computer Applications
- Vol. 179 (25) , 16-21
Collaboration of Nonlinear Control Strategy and Pitch Angle Control of DFIG Equipped Wind Turbine during all Operating Regions
- 19 March 2018
- Published by Foundation of Computer Science in International Journal of Computer Applications
- Vol. 179 (25) , 16-21
Open AccessCollaboration of Nonlinear Control Strategy and Pitch Angle Control of DFIG Equipped Wind Turbine during all Operating Regions
- 31 July 2016
- Published by Praise Worthy Prize in International Review of Automatic Control (IREACO)
- Vol. 9 (4) , 207
Enhanced Sliding Mode MPPT and Power Control for Wind Turbine Systems Driven DFIG (Doubly-Fed Induction Generator)
- 31 July 2016
- Published by Praise Worthy Prize in International Review of Automatic Control (IREACO)
- Vol. 9 (4) , 207
Enhanced Sliding Mode MPPT and Power Control for Wind Turbine Systems Driven DFIG (Doubly-Fed Induction Generator)
- 1 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 84-88
Integral backstepping control based maximum power point tracking strategy for wind turbine systems driven DFIG
In this paper, a new robust and efficient nonlinear speed control strategy of the turbine-doubly fed induction generator system is designed in order to improve the control and the energy performances of this system. The proposed integral backstepping control includes two control blocks: the first one uses the MPPT strategy to adapt the turbine speed at the generator speed value by keeping the power coefficient at maximum value. The second block ensures the active and reactive powers generator regulation via control of dq-axis currents. The stability of the closed-loop system is analyzed and sufficient conditions are given to prove the practical stability. The simulations realized in Matlab/Simulink show the exploitation of the MPPT strategy, a good pursuit of the references and good stability.
- 1 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 84-88
Integral backstepping control based maximum power point tracking strategy for wind turbine systems driven DFIG
In this paper, a new robust and efficient nonlinear speed control strategy of the turbine-doubly fed induction generator system is designed in order to improve the control and the energy performances of this system. The proposed integral backstepping control includes two control blocks: the first one uses the MPPT strategy to adapt the turbine speed at the generator speed value by keeping the power coefficient at maximum value. The second block ensures the active and reactive powers generator regulation via control of dq-axis currents. The stability of the closed-loop system is analyzed and sufficient conditions are given to prove the practical stability. The simulations realized in Matlab/Simulink show the exploitation of the MPPT strategy, a good pursuit of the references and good stability.
- Open Access
- 2 February 2016
- Published by Springer Nature
- p. 461-474
Analytical Study of Nonlinear Controls Applied to Wind Energy Conversion Systems Using a DFIG
- 2 February 2016
- Published by Springer Nature
- p. 461-474
Open AccessAnalytical Study of Nonlinear Controls Applied to Wind Energy Conversion Systems Using a DFIG