Keiichi Okajima
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Keiichi Okajima has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Yutaro Akimoto
University of Tsukuba
5 shared publications Yohji Uchiyama
Department of Risk Engineering, University of Tsukuba, Tsukuba 3058573, Japan
3 shared publications- Abdulrahman Joubi
Graduate School of Science and Technology, University of Tsukuba, Tsukuba 3058573, Japan
2 shared publications - Almaz Akhmetov
Systems and Information Engineering, University of Tsukuba, 1-1-1 Tennodai, 305-8577, Tsukuba, Ibaraki, Japan
1 shared publication Hiromu Samuta
1 shared publicationMasashi Kawase
Department of Risk Engineering, University of Tsukuba, Tsukuba 3058573, Japan
1 shared publication
Latest Publications
- 23 August 2025
- Published by Elsevier in Journal of Environmental Management
- Vol. 393, 127073
Energy consumption assessment of silicate rock comminution options for enhanced weathering
- 23 August 2025
- Published by Elsevier in Journal of Environmental Management
- Vol. 393, 127073
Energy consumption assessment of silicate rock comminution options for enhanced weathering
- Open Access
- 19 October 2024
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 15 (10) , 477
Regional Analysis and Evaluation Method for Assessing Potential for Installation of Renewable Energy and Electric Vehicles
Many countries are adopting renewable energy (RE) and electric vehicles (EVs) to achieve net-zero emissions by 2050. The indicators of RE and EV potentials are different. Decision-makers want to introduce RE and EVs; however, they need a method to find suitable areas. In addition, this is required in the time-series analysis to provide a detailed resolution. In this study, we conducted a time-series analysis in Japan to evaluate suitable areas for the combined use of RE and EVs. The results showed the surplus RE areas and shortage RE urban areas. The time-series analysis has quantitatively shown that it is not enough to charge EV batteries using surplus RE. Moreover, a ranking methodology was developed for the evaluation based on electric demand and vehicle numbers. This enables the government’s prioritization of prefectures and the prefectures’ prioritization of municipalities according to their policies.
- 19 October 2024
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 15 (10) , 477
Open AccessRegional Analysis and Evaluation Method for Assessing Potential for Installation of Renewable Energy and Electric Vehicles
Many countries are adopting renewable energy (RE) and electric vehicles (EVs) to achieve net-zero emissions by 2050. The indicators of RE and EV potentials are different. Decision-makers want to introduce RE and EVs; however, they need a method to find suitable areas. In addition, this is required in the time-series analysis to provide a detailed resolution. In this study, we conducted a time-series analysis in Japan to evaluate suitable areas for the combined use of RE and EVs. The results showed the surplus RE areas and shortage RE urban areas. The time-series analysis has quantitatively shown that it is not enough to charge EV batteries using surplus RE. Moreover, a ranking methodology was developed for the evaluation based on electric demand and vehicle numbers. This enables the government’s prioritization of prefectures and the prefectures’ prioritization of municipalities according to their policies.
- Open Access
Techno-Economic Analysis of Solar Thermal Hydrogen Production in the United Arab Emirates
Solar thermal technology can provide the United Arab Emirates and the Middle East region with abundant clean electricity to mitigate the rising levels of carbon dioxide and satisfy future demand. Hydrogen can play a key role in the large-scale application of solar thermal technologies, such as concentrated solar plants, in the region by storing the surplus electricity and exporting it to needed countries for profit, placing the Middle East and the United Arab Emirates as major future green hydrogen suppliers. However, a hydrogen supply chain comparison between hydrogen from CSP and other renewable under the UAE’s technical and economic conditions for hydrogen export is yet to be fully considered. Therefore, in this study we provide a techno-economic analysis for well-to-ship solar hydrogen supply chain that compares CSP and PV technologies with a solid oxide water electrolyzer for hydrogen production, assuming four different hydrogen delivery pathways based on the location of electrolyzer and source of electricity, assuming the SOEC can be coupled to the CSP plant when placed at the same site or provided with electric heaters when placed at PV plant site or port sites. The results show that the PV plant achieves a lower levelized cost of electricity than that of the CSP plant with 5.08 ¢/kWh and 8.6 ¢/kWh, respectively. Hydrogen production results show that the scenario where SOEC is coupled to the CSP plant is the most competitive scenario as it achieves the payback period in the shortest period compared to the other scenarios, and also provides higher revenues and a cheaper LCOH of 7.85 $/kgH2.
Open AccessTechno-Economic Analysis of Solar Thermal Hydrogen Production in the United Arab Emirates
Solar thermal technology can provide the United Arab Emirates and the Middle East region with abundant clean electricity to mitigate the rising levels of carbon dioxide and satisfy future demand. Hydrogen can play a key role in the large-scale application of solar thermal technologies, such as concentrated solar plants, in the region by storing the surplus electricity and exporting it to needed countries for profit, placing the Middle East and the United Arab Emirates as major future green hydrogen suppliers. However, a hydrogen supply chain comparison between hydrogen from CSP and other renewable under the UAE’s technical and economic conditions for hydrogen export is yet to be fully considered. Therefore, in this study we provide a techno-economic analysis for well-to-ship solar hydrogen supply chain that compares CSP and PV technologies with a solid oxide water electrolyzer for hydrogen production, assuming four different hydrogen delivery pathways based on the location of electrolyzer and source of electricity, assuming the SOEC can be coupled to the CSP plant when placed at the same site or provided with electric heaters when placed at PV plant site or port sites. The results show that the PV plant achieves a lower levelized cost of electricity than that of the CSP plant with 5.08 ¢/kWh and 8.6 ¢/kWh, respectively. Hydrogen production results show that the scenario where SOEC is coupled to the CSP plant is the most competitive scenario as it achieves the payback period in the shortest period compared to the other scenarios, and also provides higher revenues and a cheaper LCOH of 7.85 $/kgH2.
- Open Access
A Production and Delivery Model of Hydrogen from Solar Thermal Energy in the United Arab Emirates
Hydrogen production from surplus solar electricity as energy storage for export purposes can push towards large-scale application of solar energy in the United Arab Emirates and the Middle East region; this region’s properties of high solar irradiance and vast empty lands provide a good fit for solar technologies such as concentrated solar power and photovoltaics. However, a thorough comparison between the two solar technologies, as well as investigating the infrastructure of the United Arab Emirates for a well-to-ship hydrogen pathway, is yet to be fully carried out. Therefore, in this study we aim to provide a full model for solar hydrogen production and delivery by evaluating the potential of concentrated solar power and photovoltaics in the UAE, then comparing two different pathways for hydrogen delivery based on the location of hydrogen production sites. A Solid Oxide Cell Electrolyzer (SOEC) is used for technical comparison, while the shortest routes for hydrogen transport were analyzed using Geographical Information System (GIS). The results show that CSP technology coupled with SOEC is the most favorable pathway for large-scale hydrogen from solar energy production in the UAE for export purposes. Although PV has a slightly higher electricity potential compared to CSP, around 42 GWh/km2 to 41.1 GWh/km2, respectively, CSP show the highest productions rates of over 6 megatons of hydrogen when the electrolyzer is placed at the same site as the CSP plant, while PV generates 5.15 megatons when hydrogen is produced at the same site with PV plants; meanwhile, hydrogen from PV and CSP shows similar levels of 4.8 and 4.6 megatons of hydrogen, respectively, when electrolyzers are placed at port sites. Even considering the constraints in the UAE’s infrastructure and suggesting new shorter electrical transmission lines that could save up to 0.1 megatons of hydrogen in the second pathway, production at the same site with CSP is still the most advantageous scenario.
Open AccessA Production and Delivery Model of Hydrogen from Solar Thermal Energy in the United Arab Emirates
Hydrogen production from surplus solar electricity as energy storage for export purposes can push towards large-scale application of solar energy in the United Arab Emirates and the Middle East region; this region’s properties of high solar irradiance and vast empty lands provide a good fit for solar technologies such as concentrated solar power and photovoltaics. However, a thorough comparison between the two solar technologies, as well as investigating the infrastructure of the United Arab Emirates for a well-to-ship hydrogen pathway, is yet to be fully carried out. Therefore, in this study we aim to provide a full model for solar hydrogen production and delivery by evaluating the potential of concentrated solar power and photovoltaics in the UAE, then comparing two different pathways for hydrogen delivery based on the location of hydrogen production sites. A Solid Oxide Cell Electrolyzer (SOEC) is used for technical comparison, while the shortest routes for hydrogen transport were analyzed using Geographical Information System (GIS). The results show that CSP technology coupled with SOEC is the most favorable pathway for large-scale hydrogen from solar energy production in the UAE for export purposes. Although PV has a slightly higher electricity potential compared to CSP, around 42 GWh/km2 to 41.1 GWh/km2, respectively, CSP show the highest productions rates of over 6 megatons of hydrogen when the electrolyzer is placed at the same site as the CSP plant, while PV generates 5.15 megatons when hydrogen is produced at the same site with PV plants; meanwhile, hydrogen from PV and CSP shows similar levels of 4.8 and 4.6 megatons of hydrogen, respectively, when electrolyzers are placed at port sites. Even considering the constraints in the UAE’s infrastructure and suggesting new shorter electrical transmission lines that could save up to 0.1 megatons of hydrogen in the second pathway, production at the same site with CSP is still the most advantageous scenario.
- Open Access
Evaluation of Impurity Concentration Process and Mitigation Operation in Fuel Cell System for Using Biogas
For a low-carbon society, it is necessary to extract hydrogen for fuel cells from biogas rather than from fossil fuels. However, impurities contained in the biogas affect the fuel cell; hence, there is a need for system and operation methods to remove these impurities. In this study, to develop a fuel cell system for the effective utilization of biogas-derived hydrogen, the compositional change and concentration of impurities in the hydrogen recirculation system under actual operation were evaluated using process simulation. Then, the mitigation operation for performance degradation using simple purification methods was evaluated on the proton exchange membrane fuel cells (PEMFC) stack. In the process simulation of the hydrogen recirculation system, including the PEMFC stack, the concentration of impurities remained at a level that did not pose a problem to the performance. In the constant voltage test for a simulated gas supply of biogas-derived hydrogen, the conditions for applying the methanation reforming and air bleeding methods were analyzed. As a result, methanation reforming is more suitable for supplying biogas-containing CO to the PEMFC stack for continuous operation.
Open AccessEvaluation of Impurity Concentration Process and Mitigation Operation in Fuel Cell System for Using Biogas
For a low-carbon society, it is necessary to extract hydrogen for fuel cells from biogas rather than from fossil fuels. However, impurities contained in the biogas affect the fuel cell; hence, there is a need for system and operation methods to remove these impurities. In this study, to develop a fuel cell system for the effective utilization of biogas-derived hydrogen, the compositional change and concentration of impurities in the hydrogen recirculation system under actual operation were evaluated using process simulation. Then, the mitigation operation for performance degradation using simple purification methods was evaluated on the proton exchange membrane fuel cells (PEMFC) stack. In the process simulation of the hydrogen recirculation system, including the PEMFC stack, the concentration of impurities remained at a level that did not pose a problem to the performance. In the constant voltage test for a simulated gas supply of biogas-derived hydrogen, the conditions for applying the methanation reforming and air bleeding methods were analyzed. As a result, methanation reforming is more suitable for supplying biogas-containing CO to the PEMFC stack for continuous operation.
- Open Access
- 1 January 2013
- Published by Hindawi Limited in Journal of Renewable Energy
- Vol. 2013, 1-8
Evaluation of Potential Geographic Distribution for Large-Scale Photovoltaic System in Suburbs of China
Since China is the largest CO2emitting country in the world, photovoltaic (PV) systems are expected to be widely installed to reduce CO2emission. In general, available area for PV installation depends on urban area due to differences in land use and slope. Amount of electricity generated by a PV system also depends on urban area because of differences in solar irradiation and ambient temperature. The aim of this study is to evaluate the installation of large-scale PV systems in suburbs of China, taking these differences into consideration. We have used a geographic information system (GIS) to evaluate amounts of installation capacity of large-scale PV systems, electricity generated, and CO2emission reduction by the installation capacity of large-scale PV systems in suburbs of Liaoning, Shanghai, Anhui, and Guangdong. In Liaoning, the amount of CO2emission reduction by the installation capacity of large-scale PV systems was estimated to be the largest, 3,058 kt-CO2/yr, due to its larger amount of the installation capacity, 2439.4 MW, than the amount of the installation capacity in other regions.
- 1 January 2013
- Published by Hindawi Limited in Journal of Renewable Energy
- Vol. 2013, 1-8
Open AccessEvaluation of Potential Geographic Distribution for Large-Scale Photovoltaic System in Suburbs of China
Since China is the largest CO2emitting country in the world, photovoltaic (PV) systems are expected to be widely installed to reduce CO2emission. In general, available area for PV installation depends on urban area due to differences in land use and slope. Amount of electricity generated by a PV system also depends on urban area because of differences in solar irradiation and ambient temperature. The aim of this study is to evaluate the installation of large-scale PV systems in suburbs of China, taking these differences into consideration. We have used a geographic information system (GIS) to evaluate amounts of installation capacity of large-scale PV systems, electricity generated, and CO2emission reduction by the installation capacity of large-scale PV systems in suburbs of Liaoning, Shanghai, Anhui, and Guangdong. In Liaoning, the amount of CO2emission reduction by the installation capacity of large-scale PV systems was estimated to be the largest, 3,058 kt-CO2/yr, due to its larger amount of the installation capacity, 2439.4 MW, than the amount of the installation capacity in other regions.
- 1 October 2012
- Published by Taylor & Francis in Journal of International Council on Electrical Engineering
- Vol. 2 (4) , 403-408
Evaluation for the Adoption of Renewable Energy in China using Geographic Information System
- 1 October 2012
- Published by Taylor & Francis in Journal of International Council on Electrical Engineering
- Vol. 2 (4) , 403-408
Evaluation for the Adoption of Renewable Energy in China using Geographic Information System
- 1 January 2011
- Published by Pan Pacific Association of Input-Output Studies in Input-Output Analysis
- Vol. 19 (3) , 60-71
Two regional IO analysis of sectoral CO2 emissions induced by domestic and export demand in Ibaraki Prefecture
地方自治体の将来の CO2排出量は自治体の権限を越えた国内外の経済状況に影響を受ける.本研究では国内外の経済状況の変化が茨城県の CO2排出量に与える影響をシナリオ分析によって評価する.マクロ経済指標と地域間産業連関モデルを組み合わせて,2030 年の茨城県内 CO2排出量,およびその他都道府県との CO2排出量の相互依存関係の変化を推計する.結果として,民間消費,および輸出の増加がその他都道府県から茨城県に誘発する CO2排出量を増加させる.一方で,産業構造の変化,効率化と輸入の増加により間接CO2排出量が減少し,県内全体の CO2排出量増加が抑制される.そして,国内や海外の経済動向が茨城県内の CO2排出量に与える影響は減少する.
- 1 January 2011
- Published by Pan Pacific Association of Input-Output Studies in Input-Output Analysis
- Vol. 19 (3) , 60-71
Two regional IO analysis of sectoral CO2 emissions induced by domestic and export demand in Ibaraki Prefecture
地方自治体の将来の CO2排出量は自治体の権限を越えた国内外の経済状況に影響を受ける.本研究では国内外の経済状況の変化が茨城県の CO2排出量に与える影響をシナリオ分析によって評価する.マクロ経済指標と地域間産業連関モデルを組み合わせて,2030 年の茨城県内 CO2排出量,およびその他都道府県との CO2排出量の相互依存関係の変化を推計する.結果として,民間消費,および輸出の増加がその他都道府県から茨城県に誘発する CO2排出量を増加させる.一方で,産業構造の変化,効率化と輸入の増加により間接CO2排出量が減少し,県内全体の CO2排出量増加が抑制される.そして,国内や海外の経済動向が茨城県内の CO2排出量に与える影響は減少する.