NRNikolay Rogalev

Nikolay Rogalev

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nikolay Rogalev has a total of 33 co-authors. Here are the top co-authors by number of shared publications:

  • Andrey Rogalev

    Department of Innovative Technologies for High-Tech Industries, National Research University “Moscow Power Engineering Institute”, 111250 Moscow, Russia

    23 shared publications
  • Vladimir Kindra

    National Research University Moscow Power Engineering Institute, Moscow, Russia

    21 shared publications
  • Olga Zlyvko

    Department of Innovative Technologies for High-Tech Industries, National Research University “Moscow Power Engineering Institute”, 111250 Moscow, Russia

    13 shared publications
  • Sergey Osipov

    Department of Innovative Technologies of High-Tech Industries (ITHTI), National Research University “Moscow Power Engineering Institute” (MPEI), Krasnokazarmennaya str., 14, Moscow 111250, Russia

    12 shared publications
  • Ivan Komarov

    Department of Innovative Technologies of High-Tech Industries, National Research University “Moscow Power Engineering Institute”, 111250 Moscow, Russia

    9 shared publications
  • Andrey Vegera

    Department of Innovative Technologies for High-Tech Industries, National Research University “Moscow Power Engineering Institute”, 111250 Moscow, Russia

    5 shared publications

Latest Publications

  • Open Access

    Experimental tests of an oxy-fuel natural gas burner with CO2 dilution at atmospheric pressure as model conditions for full-scale supercritical combustion

    by Sergey Osipov, Pavel Bryzgunov, Vadim Yakovlev, Ilya Feoktistov, Nikolay Rogalev

    Direct-fired supercritical CO2 cycles are one of the promising approaches to eliminate CO2 emissions in the power energy sector, while maintaining high efficiency and the ability to burn fossil fuels. One of the key elements of such cycles is the combustor, in which natural gas is burned in an O2/CO2 environment at supercritical pressure. Oxy-fuel CO2-diluted combustion differs significantly from traditional air-fuel combustion, which creates the need to adapt existing numerical modeling techniques. Experimental data are required to verify numerical methods, but present experimental studies are fragmented and non-formalized. This paper presents the results of an experimental test of the 15 kW oxy-fuel burner device in a tunnel gas furnace at atmospheric pressure. Experimental tests were carried out with oxygen-fuel ratios (α) of 1, 1.45, and 1.75 in the range of CO2 mass fractions in the oxidizer (γ) from 0 to 0.9. An experimental temperature profile is obtained, the adiabatic combustion temperature is calculated, and the boundaries of stable combustion are determined. Based on the experimental results, the main similarity criteria of combustion were calculated, and it was shown that by changing the composition of the model mixture, it is possible to reduce the discrepancy of the similarity criteria between the model and full-scale oxy-fuel combustors.

  • Open Access

    Experimental study of the optically transparent gas flow and temperature field using the background oriented Schlieren method

    by P. A. Bryzgunov, D. S. Pisarev, O. V. Zlyvko, A. N. Rogalev, N. D. Rogalev

    The article presents the results of an experimental study of the flow structure and temperature field in a plume formed above a low-power burner flame. The pulsation and spectral characteristics of the flow at key sampling points were analyzed, which allowed us to draw a conclusion about the nature of the flow at the main points of the jet. It is proposed to use time series of changes in the point displacement field to analyze the spectral characteristics of the flow. In this work, the Background Oriented Schlieren method was used to visualize the flow and determine temperatures followed by post-processing in the program developed during the study. The advantage of this approach compared to the traditional optical Schlieren method is that there is no need for parabolic mirrors as well as the ability to obtain results in digital form convenient for further processing. During the experiment, a special background with randomly located bright dots was placed behind the object of study which was filmed by a video camera. Fluctuations in the medium density caused changes in the refractive indices of the medium, as a result of which the points on the background of the video frames displaced, and the displacements of the points was proportional to the change in the refractive index which in turn is proportional to the density gradient and, accordingly, to the temperature gradient of the medium. The displacement of the points was determined by cross-correlation analysis of each frame in comparison with the frames in the absence of disturbances. Then the displacement field was filtered by a median filter in order to minimize noise and statistical outliers. The filtered displacement field was used to calculate the temperature field, while solving the Cauchy problem for temperature with a known derivative at a point and specified boundary conditions. A set of instantaneous point displacement fields, instantaneous and time-averaged temperature fields was obtained, which allowed us to draw conclusions about the flow structure. At characteristic points of the jet, oscillograms of the displacement value were obtained as well as pulsation spectra with an inertial interval corresponding to the “–5/3” law. The approach proposed in the work allows, in addition to contactless study of the temperature field, also studying turbulent flow pulsations in the case of close to two-dimensional or axisymmetric flows.

  • Open Access

    Thermodynamic Analysis of Nuclear Power Plants with External Steam Superheating

    by Vladimir Kindra, Mikhail Ostrovsky, Igor Maksimov, Roman Zuikin, Nikolay Rogalev

    Increasing the efficiency and capacity of nuclear power units is a promising direction for the development of power generation systems. Unlike thermal power plants, nuclear power plants operate at relatively low temperatures of the steam working fluid. Due to this, the thermodynamic efficiency of such schemes remains relatively low today. The temperature of steam and the efficiency of nuclear power units can be increased by integrating external superheating of the working fluid into the schemes of steam turbine plants. This paper presents the results of a thermodynamic analysis of thermal schemes of NPPs integrated with hydrocarbon-fueled plants. Schemes with a remote combustion chamber, a boiler unit and a gas turbine plant are considered. It has been established that superheating fresh steam after the steam generator is an effective superheating solution due to the utilization of heat from the exhaust gases of the GTU using an afterburner. Furthermore, there is a partial replacement of high- and low-pressure heaters in the regeneration system, with gas heaters for condensate and steam superheating after the steam generator for water-cooled and liquid-metal reactor types. An increase in the net efficiency of the hybrid NPP is observed by 8.49 and 5.11%, respectively, while the net electric power increases by 93.3 and 76.7%.


  • Open Access

    Comparative Analysis of the Oxy-Fuel Kinetic Mechanisms by the Ignition Delay Time of Methane

    by Sergey Osipov, Vladimir Sokolov, Vadim Yakovlev, Muhammad Maaz Shaikh, Nikolay Rogalev

    Supercritical oxy-fuel combustion, which allows for the high efficiency of power generation with near-zero CO2 emissions, is considered a promising method to reduce the carbon footprint in the power energy sector. One of the problems in the widespread use of oxy-fuel combustion is a lack of comparative studies on the existing oxy-fuel combustion kinetic mechanisms depending on mixture composition, which complicates the choice of a kinetic mechanism for modeling oxy-fuel combustion. In this paper, a comparative verification of the kinetic mechanisms of GRI-Mech 3.0, UoS sCO2 2.0, OXY-NG, and Skeletal was performed using published experimental data on the ignition delay time of methane under conditions of oxy-fuel combustion. A comparative numerical study of the kinetic mechanisms in the wide range of pressures, CO2 mass fractions in oxidizer (γ), and excess oxidizer ratios (α) by the ignition delay time is also carried out. It was found that the limits of applicability of all of the mechanisms studied are absent when modeling the ignition delay time, the most accurate mechanism to model the IDT of methane in oxy-fuel conditions being UoS sCO2 2.0, while the other three mechanisms are overall much inferior to it in terms of accuracy. However, Skeletal and GRI-Mech 3.0 mechanisms can be used to model the IDT during the oxy-fuel combustion of methane under both atmospheric and supercritical conditions, although only in a narrow range of γ.


  • Open Access

    Thermodynamic Analysis and Optimization of Power Cycles for Waste Heat Recovery

    by Igor Maksimov, Vladimir Kindra, Andrey Vegera, Andrey Rogalev, Nikolay Rogalev

    Improvement of energy efficiency in technological processes at industrial enterprises is one of the key areas of energy saving. Reduction of energy costs required for the production of energy-intensive products can be achieved through the utilization of waste heat produced by high-temperature thermal furnace units. Generation of electric power based on the waste heat using power cycles with working fluids that are not conventional for large power engineering, may become a promising energy saving trend. In this paper, thermodynamic analysis and optimization of power cycles for the purposes of waste heat recovery are performed. The efficiency of combining several power cycles was also evaluated. It has been established that the combination of the Brayton recompression cycle on supercritical carbon dioxide with the organic Rankine cycle using R124 allows for greater electrical power than steam-power cycles with three pressure circuits under conditions where the gas temperature is in the range of 300–550 °C and the cooling temperature of is up to 80 °C. Additionally, when cooling gases with a high sulfur and moisture content to 150 °C, the combined cycle has greater electrical power at gas temperatures of 330 °C and above. At enterprises where the coolant has a high content of sulfur compounds or moisture and deep cooling of gases will lead to condensation, for example, at petrochemical and non-ferrous metallurgy enterprises, the use of combined cycles can ensure a utilization efficiency of up to 45%.


  • Open Access

    Development and modeling of technological scheme of steam methane reforming with oxy-fuel combustion and carbon capture

    by N.D. Rogalev, A.N. Rogalev, V.O. Kindra, D.S. Kovalev, A.N. Vegera

    At present, the most common technology for hydrogen production is steam methane reforming. Its key disadvantage is significant emissions of carbon dioxide into the atmosphere due to the presence of natural gas combustion in the air in the reformer furnace. This problem can be solved by switching to oxygen combustion of organic fuel. This paper presents the results of developing a new process flow diagram for a steam methane reforming and a comparative analysis of its energy and environmental characteristics with the closest analogue: steam methane reforming with monoethanolamine cleaning of exhaust gases. To perform a thermodynamic analysis of process flow diagram options using the Aspen Plus software package, mathematical models have been developed that include sequentially solved equations for the processes of oxygen combustion of fuel, steam reforming reaction, steam shift reaction and monoethanolamine absorption reaction at variable pressure. In addition, the modeling took into account the possibility of two side reactions: steam reforming of carbon monoxide and carbon dioxide reforming of methane. The NIST REFPROP database was used to determine the thermodynamic properties of the substances. The thermodynamic analysis showed that for the proposed flow chart of the oxygen-fired methane steam methane reforming, an increase in temperature from 850 to 1050 °C results in a 14.4 % decrease in the mass flow rate of natural gas. At the same time, the thermodynamically optimal temperature in the reformer, equal to 950 °C, provides the possibility of achieving the fuel HUF value of 79.2 %. In turn, the comparison of the energy and environmental characteristics of the two considered steam methane reforming units allowed us to conclude that the proposed flow chart with oxygen-fired fuel has two advantages over the flow chart with CO2 capture by absorption in monoethanolamine: higher energy efficiency (net efficiency is 2.12 % higher) and lower greenhouse gas emissions (carbon dioxide emissions are 14.5 times lower). The proposed process flow diagram, as well as the developed mathematical models, can be used in the development of highly efficient steam methane conversion plants with minimal emissions of harmful substances into the atmosphere.

  • Open Access

    Reforming Natural Gas for CO2 Pre-Combustion Capture in Trinary Cycle Power Plant

    by Nikolay Rogalev, Andrey Rogalev, Vladimir Kindra, Olga Zlyvko, Dmitriy Kovalev

    Today, most of the world’s electric energy is generated by burning hydrocarbon fuels, which causes significant emissions of harmful substances into the atmosphere by thermal power plants. In world practice, flue gas cleaning systems for removing nitrogen oxides, sulfur, and ash are successfully used at power facilities but reducing carbon dioxide emissions at thermal power plants is still difficult for technical and economic reasons. Thus, the introduction of carbon dioxide capture systems at modern power plants is accompanied by a decrease in net efficiency by 8–12%, which determines the high relevance of developing methods for increasing the energy efficiency of modern environmentally friendly power units. This paper presents the results of the development and study of the process flow charts of binary and trinary combined-cycle gas turbines with minimal emissions of harmful substances into the atmosphere. This research revealed that the net efficiency rate of a binary CCGT with integrated post-combustion technology capture is 39.10%; for a binary CCGT with integrated pre-combustion technology capture it is 40.26%; a trinary CCGT with integrated post-combustion technology capture is 40.35%; and for a trinary combined-cycle gas turbine with integrated pre-combustion technology capture it is 41.62%. The highest efficiency of a trinary CCGT with integrated pre-combustion technology capture is due to a reduction in the energy costs for carbon dioxide capture by 5.67 MW—compared to combined-cycle plants with integrated post-combustion technology capture—as well as an increase in the efficiency of the steam–water circuit of the combined-cycle plant by 3.09% relative to binary cycles.


  • Open Access

    Thermodynamic Analysis and Optimization of Binary CO2-Organic Rankine Power Cycles for Small Modular Reactors

    by Vladimir Kindra, Igor Maksimov, Daniil Patorkin, Andrey Rogalev, Nikolay Rogalev

    Small nuclear power plants are a promising direction of research for the development of carbon-free energy in isolated power systems and in remote regions with undeveloped infrastructure. Improving the efficiency of power units integrated with small modular reactors will improve the prospects for the commercialization of such projects. Power cycles based on supercritical carbon dioxide are an effective solution for nuclear power plants that use reactor facilities with an initial coolant temperature above 550 °C. However, the presence of low temperature rejected heat sources in closed Bryton cycles indicates a potential for energy saving. This paper presents a comprehensive thermodynamic analysis of the integration of an additional low-temperature organic Rankine cycle for heat recovery to supercritical carbon dioxide cycles. A scheme for sequential heat recovery from several sources in S-CO2 cycles is proposed. It was found that the use of R134a improved the power of the low-temperature circuit. It was revealed that in the S-CO2 Brayton cycle with a recuperator, the ORC add-on increased the net efficiency by an average of 2.98%, and in the recompression cycle by 1.7–2.2%. With sequential heat recovery in the recuperative cycle from the intercooling of the compressor and the main cooler, the increase in efficiency from the ORC superstructure will be 1.8%.


  • Open Access

    Thermodynamic Analysis and Comparison of Power Cycles for Small Modular Reactors

    by Vladimir Kindra, Igor Maksimov, Olga Zlyvko, Andrey Rogalev, Nikolay Rogalev

    Small nuclear power plants can provide a stable, carbon-free energy supply to civil infrastructure and industrial enterprises in remote regions isolated from unified energy systems. More than 70 projects of small modular reactors are currently being developed by IAEA member countries; several low-power power units are already supplying thermal and electrical energy to consumers. One of the main limitations standing in the way of widespread dissemination of this technology is the high specific capital cost of a low-power nuclear power plant; therefore, new scientific and technical solutions are needed in this industry. Increasing the thermodynamic efficiency of power cycles of small modular reactors can become a driver for reducing the cost of supplied electrical energy. This paper presents the results of a comprehensive thermodynamic analysis of existing and promising power cycles for small modular reactors. In addition to traditional steam power cycles, cycles using non-traditional working fluids, including carbon dioxide, freons, and helium cycles, are considered. Optimal sets of thermodynamic parameters were determined to ensure maximum net efficiency of electricity production. For water-cooled reactor plants, a maximum efficiency of 33.5% at an initial temperature of 300 °C could be achieved using a steam turbine cycle. It was revealed that for reactor plants with liquid metal and liquid salt coolant in the range of initial temperatures above 550–700 °C, the maximum thermal efficiency was provided by the Brayton recompression cycle with a carbon dioxide coolant: the net electrical efficiency exceeded the level of steam turbine plants, with intermediate superheating of the steam, and could reach a value of 49.4% at 600 °C. This makes the use of these cycles promising for low-power nuclear power plants with a high initial temperature. In small gas-cooled reactor plants with a helium coolant, the use of a binary cycle consisting of a helium Brayton cycle and a steam-powered Rankine cycle provided an efficiency of 44.3% at an initial helium temperature of 700 °C and 52.9% at 1000 °C. This was higher than in the Brayton cycle with a recuperator, with a minimum temperature difference in the heat exchanger of 20 °C: the efficiency was 40.2% and 52%, respectively. Also, the transition to power cycles with non-traditional working fluids will lead to a change in the operating conditions of turbomachines and heat exchangers.


  • Open Access

    An Overview of Small Nuclear Power Plants for Clean Energy Production: Comparative Analysis of Distributed Generation Technologies and Future Perspectives

    by Nikolay Rogalev, Andrey Rogalev, Vladimir Kindra, Olga Zlyvko, Sergey Osipov

    There is a steady trend in the world to increase the share of distributed generation. The volume of self-generated energy commissioning is constantly growing, with projected increases in growth rates in the future. At the same time, demands for efficiency and environmental safety in new power plants are constantly increasing. In this regard, one of the promising areas for the development of distributed energy is the transition to small nuclear power plants (SNPPs). As in the case of wind and solar power plants, SNPP operations are not accompanied by emissions of toxic substances or greenhouse gases into the atmosphere. In addition, SNPPs consume a much smaller volume and mass of fuel compared to conventional small-capacity fossil fuel power plants. This paper describes the characteristics of the main types of distributed generation. The key technical and economic characteristics of existing and prospective small-capacity nuclear fuel facilities are systematized. The results of a comparative analysis of the cost of electricity produced by SNPPs and competing power plants are also presented. In addition, a number of promising regions of the Russian Federation for the introduction of SNPPS have been identified, and a review of the methods of energy storage for SNPPS, which are necessary when working in an isolated power system, has been carried out.