Thomas Bohlen
Research Subjects
Thomas Bohlen has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Amin Roshandel Kahoo
Faculty of Mining, Petroleum and Geophysics Engineering, Shahrood University of Technology, Shahrood, Iran
1 shared publication - Erik Hans Saenger
Hochschule Bochum, Bochum, Germany
1 shared publication F. Wittkamp
Karlsruhe Institute of Technology
1 shared publicationFlorian Wittkamp
Geophysical Institute, Karlsruhe Institute of Technology (KIT), D-76187 Karlsruhe, Germany.
1 shared publication- Joyrles Fernandes de Moraes
Rua Mendeleyev 1
1 shared publication - Jörg Schleicher
UNICAMP & INCT-GP
1 shared publication
Latest Publications
- 1 March 2026
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 91 (2) , S43-S62
Viscoacoustic least squares reverse time migration with attenuation estimation using alternating directions
Seismic imaging in attenuating media requires accurate compensation for amplitude decay and phase dispersion. Conventional least-squares reverse time migration (LSRTM) methods are sensitive to this phenomenon, as the lack of compensation for dispersion and absorption can lead to low-resolution images with distorted and blurred amplitudes. A common way to overcome this problem is by applying viscoacoustic modeling based on an independent estimate of the quality factor Q (Q-LSRTM). An alternative procedure is to incorporate the attenuation estimation into Q-LSRTM in a multiparameter approach, estimating reflectivity and attenuation models within the same iterative procedure. This procedure was carried out using alternating directions (AD-Q-LSRTM). The idea was to alternate between estimating reflectivity and attenuation, iterating this process until both parameters converged. The approach was validated through numerical experiments on three synthetic models: a layered model with an attenuation anomaly, the Marmousi-II model, and a part of the BP gas reservoir model. The results demonstrated that the proposed method improved the delineation of subsurface structures, particularly in highly attenuating regions, while reducing imaging artifacts. AD-Q-LSRTM allowed the attenuation model to account for transmission losses, multiple scattering effects, and illumination variations, leading to enhanced reflectivity images. Whereas conventional Q-LSRTM relies on an a priori attenuation model (typically assuming a constant Q), this method provided a more robust solution by jointly refining both the reflectivity image and the Q model. Although challenges remain in fully recovering an accurate attenuation model due to inherent trade-offs, the proposed framework achieved significant improvements in seismic image resolution and amplitude fidelity. These findings highlight the potential of AD-Q-LSRTM as a robust tool for imaging complex subsurface environments.
- 1 March 2026
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 91 (2) , S43-S62
Viscoacoustic least squares reverse time migration with attenuation estimation using alternating directions
Seismic imaging in attenuating media requires accurate compensation for amplitude decay and phase dispersion. Conventional least-squares reverse time migration (LSRTM) methods are sensitive to this phenomenon, as the lack of compensation for dispersion and absorption can lead to low-resolution images with distorted and blurred amplitudes. A common way to overcome this problem is by applying viscoacoustic modeling based on an independent estimate of the quality factor Q (Q-LSRTM). An alternative procedure is to incorporate the attenuation estimation into Q-LSRTM in a multiparameter approach, estimating reflectivity and attenuation models within the same iterative procedure. This procedure was carried out using alternating directions (AD-Q-LSRTM). The idea was to alternate between estimating reflectivity and attenuation, iterating this process until both parameters converged. The approach was validated through numerical experiments on three synthetic models: a layered model with an attenuation anomaly, the Marmousi-II model, and a part of the BP gas reservoir model. The results demonstrated that the proposed method improved the delineation of subsurface structures, particularly in highly attenuating regions, while reducing imaging artifacts. AD-Q-LSRTM allowed the attenuation model to account for transmission losses, multiple scattering effects, and illumination variations, leading to enhanced reflectivity images. Whereas conventional Q-LSRTM relies on an a priori attenuation model (typically assuming a constant Q), this method provided a more robust solution by jointly refining both the reflectivity image and the Q model. Although challenges remain in fully recovering an accurate attenuation model due to inherent trade-offs, the proposed framework achieved significant improvements in seismic image resolution and amplitude fidelity. These findings highlight the potential of AD-Q-LSRTM as a robust tool for imaging complex subsurface environments.
- Open Access
- 1 August 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (15) , 7741
Seismic Imaging of Complex Velocity Structures by 2D Pseudo-Viscoelastic Time-Domain Full-Waveform Inversion
In the presented study, multi-parameter inversion in the presence of attenuation is used for the reconstruction of the P- and the S- wave velocities and the density models of a synthetic shallow subsurface structure that contains a dipping high-velocity layer near the surface with varying thicknesses. The problem of high-velocity layers also complicates selection of an appropriate initial velocity model. The forward problem is solved with the finite difference, and the inverse problem is solved with the preconditioned conjugate gradient. We used also the adjoint wavefield approach for computing the gradient of the misfit function without explicitly build the sensitivity matrix. The proposed method is capable of either minimizing the least-squares norm of the data misfit or use the Born approximation for estimating partial derivative wavefields. It depends on which characteristics of the recorded data—such as amplitude, phase, logarithm of the complex-valued data, envelope in the misfit, or the linearization procedure of the inverse problem—are used. It showed that by a pseudo-viscoelastic time-domain full-waveform inversion, structures below the high-velocity layer can be imaged. However, by inverting attenuation of P- and S- waves simultaneously with the velocities and mass density, better results would be obtained.
- 1 August 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (15) , 7741
Open AccessSeismic Imaging of Complex Velocity Structures by 2D Pseudo-Viscoelastic Time-Domain Full-Waveform Inversion
In the presented study, multi-parameter inversion in the presence of attenuation is used for the reconstruction of the P- and the S- wave velocities and the density models of a synthetic shallow subsurface structure that contains a dipping high-velocity layer near the surface with varying thicknesses. The problem of high-velocity layers also complicates selection of an appropriate initial velocity model. The forward problem is solved with the finite difference, and the inverse problem is solved with the preconditioned conjugate gradient. We used also the adjoint wavefield approach for computing the gradient of the misfit function without explicitly build the sensitivity matrix. The proposed method is capable of either minimizing the least-squares norm of the data misfit or use the Born approximation for estimating partial derivative wavefields. It depends on which characteristics of the recorded data—such as amplitude, phase, logarithm of the complex-valued data, envelope in the misfit, or the linearization procedure of the inverse problem—are used. It showed that by a pseudo-viscoelastic time-domain full-waveform inversion, structures below the high-velocity layer can be imaged. However, by inverting attenuation of P- and S- waves simultaneously with the velocities and mass density, better results would be obtained.
- 9 May 2019
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 84 (5) , B311-B324
Seismic characterization of submarine gas-hydrate deposits in the Western Black Sea by acoustic full-waveform inversion of ocean-bottom seismic data
Evidence for gas-hydrate occurrence in the Western Black Sea is found from seismic measurements revealing bottom-simulating reflectors (BSRs) of varying distinctness. From an ocean-bottom seismic data set, low-resolution traveltime-tomography models of P-wave velocity VP are constructed. They serve as input for acoustic full-waveform inversion (FWI), which we apply to derive high-resolution parameter models aiding the interpretation of the seismic data for potential hydrate and gas deposits. Synthetic tests indicate the applicability of the FWI approach to robustly reconstruct VP models with a typical hydrate and gas signature. Models of S-wave velocity VS containing a hydrate signature can only be reconstructed when the parameter distribution of VS is already well-known. When we add noise to the modeled data to simulate field-data conditions, it prevents the reconstruction of VS completely, justifying the application of an acoustic approach. We invert for VP models from field data of two parallel profiles of 14 km length with a distance of 1 km. Results indicate a characteristic velocity trend for hydrate and gas occurrence at BSR depth in the first of the analyzed profiles. We find no indications for gas accumulations below the BSR on the second profile and only weak indications for hydrate. These differences in the VP signature are consistent with the reflectivity behavior of the migrated seismic streamer data of both profiles in which a zone of high-reflectivity amplitudes is coincident with the potential gas zone derived from the FWI result. Calculating saturation estimates for the potential hydrate and gas zones yields values of up to 30% and 1.2%, respectively.
- 9 May 2019
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 84 (5) , B311-B324
Seismic characterization of submarine gas-hydrate deposits in the Western Black Sea by acoustic full-waveform inversion of ocean-bottom seismic data
Evidence for gas-hydrate occurrence in the Western Black Sea is found from seismic measurements revealing bottom-simulating reflectors (BSRs) of varying distinctness. From an ocean-bottom seismic data set, low-resolution traveltime-tomography models of P-wave velocity VP are constructed. They serve as input for acoustic full-waveform inversion (FWI), which we apply to derive high-resolution parameter models aiding the interpretation of the seismic data for potential hydrate and gas deposits. Synthetic tests indicate the applicability of the FWI approach to robustly reconstruct VP models with a typical hydrate and gas signature. Models of S-wave velocity VS containing a hydrate signature can only be reconstructed when the parameter distribution of VS is already well-known. When we add noise to the modeled data to simulate field-data conditions, it prevents the reconstruction of VS completely, justifying the application of an acoustic approach. We invert for VP models from field data of two parallel profiles of 14 km length with a distance of 1 km. Results indicate a characteristic velocity trend for hydrate and gas occurrence at BSR depth in the first of the analyzed profiles. We find no indications for gas accumulations below the BSR on the second profile and only weak indications for hydrate. These differences in the VP signature are consistent with the reflectivity behavior of the migrated seismic streamer data of both profiles in which a zone of high-reflectivity amplitudes is coincident with the potential gas zone derived from the FWI result. Calculating saturation estimates for the potential hydrate and gas zones yields values of up to 30% and 1.2%, respectively.
- Open Access
- 1 March 2017
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 82 (2) , R109-R117
Application of a complete workflow for 2D elastic full-waveform inversion to recorded shallow-seismic Rayleigh waves
The S-wave velocity of the shallow subsurface can be inferred from shallow-seismic Rayleigh waves. Traditionally, the dispersion curves of the Rayleigh waves are inverted to obtain the (local) S-wave velocity as a function of depth. Two-dimensional elastic full-waveform inversion (FWI) has the potential to also infer lateral variations. We have developed a novel workflow for the application of 2D elastic FWI to recorded surface waves. During the preprocessing, we apply a line-source simulation (spreading correction) and perform an a priori estimation of the attenuation of waves. The iterative multiscale 2D elastic FWI workflow consists of the preconditioning of the gradients in the vicinity of the sources and a source-wavelet correction. The misfit is defined by the least-squares norm of normalized wavefields. We apply our workflow to a field data set that has been acquired on a predominantly depth-dependent velocity structure, and we compare the reconstructed S-wave velocity model with the result obtained by a 1D inversion based on wavefield spectra (Fourier-Bessel expansion coefficients). The 2D S-wave velocity model obtained by FWI shows an overall depth dependency that agrees well with the 1D inversion result. Both models can explain the main characteristics of the recorded seismograms. The small lateral variations in S-wave velocity introduced by FWI additionally explain the lateral changes of the recorded Rayleigh waves. The comparison thus verifies the applicability of our 2D FWI workflow and confirms the potential of FWI to reconstruct shallow small-scale lateral changes of S-wave velocity.
- 1 March 2017
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 82 (2) , R109-R117
Open AccessApplication of a complete workflow for 2D elastic full-waveform inversion to recorded shallow-seismic Rayleigh waves
The S-wave velocity of the shallow subsurface can be inferred from shallow-seismic Rayleigh waves. Traditionally, the dispersion curves of the Rayleigh waves are inverted to obtain the (local) S-wave velocity as a function of depth. Two-dimensional elastic full-waveform inversion (FWI) has the potential to also infer lateral variations. We have developed a novel workflow for the application of 2D elastic FWI to recorded surface waves. During the preprocessing, we apply a line-source simulation (spreading correction) and perform an a priori estimation of the attenuation of waves. The iterative multiscale 2D elastic FWI workflow consists of the preconditioning of the gradients in the vicinity of the sources and a source-wavelet correction. The misfit is defined by the least-squares norm of normalized wavefields. We apply our workflow to a field data set that has been acquired on a predominantly depth-dependent velocity structure, and we compare the reconstructed S-wave velocity model with the result obtained by a 1D inversion based on wavefield spectra (Fourier-Bessel expansion coefficients). The 2D S-wave velocity model obtained by FWI shows an overall depth dependency that agrees well with the 1D inversion result. Both models can explain the main characteristics of the recorded seismograms. The small lateral variations in S-wave velocity introduced by FWI additionally explain the lateral changes of the recorded Rayleigh waves. The comparison thus verifies the applicability of our 2D FWI workflow and confirms the potential of FWI to reconstruct shallow small-scale lateral changes of S-wave velocity.
- 3 February 2016
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 204 (3) , 1781-1788
Three-dimensional viscoelastic time-domain finite-difference seismic modelling using the staggered Adams–Bashforth time integrator
We analyse the performance of a higher order accurate staggered viscoelastic time-domain finite-difference method, in which the staggered Adams–Bashforth (ABS) third-order and fourth-order accurate time integrators are used for temporal discretization. ABS is a multistep method that uses previously calculated wavefields to increase the order of accuracy in time. The analysis shows that the numerical dispersion is much lower than that of the widely used second-order leapfrog method. Numerical dissipation is introduced by the ABS method which is significantly smaller for fourth-order than third-order accuracy. In 1-D and 3-D simulation experiments, we verify the convincing improvements of simulation accuracy of the fourth-order ABS method. In a realistic elastic 3-D scenario, the computing time reduces by a factor of approximately 2.4, whereas the memory requirements increase by approximately a factor of 2.2. The ABS method thus provides an alternative strategy to increase the simulation accuracy in time by investing computer memory instead of computing time.
- 3 February 2016
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 204 (3) , 1781-1788
Three-dimensional viscoelastic time-domain finite-difference seismic modelling using the staggered Adams–Bashforth time integrator
We analyse the performance of a higher order accurate staggered viscoelastic time-domain finite-difference method, in which the staggered Adams–Bashforth (ABS) third-order and fourth-order accurate time integrators are used for temporal discretization. ABS is a multistep method that uses previously calculated wavefields to increase the order of accuracy in time. The analysis shows that the numerical dispersion is much lower than that of the widely used second-order leapfrog method. Numerical dissipation is introduced by the ABS method which is significantly smaller for fourth-order than third-order accuracy. In 1-D and 3-D simulation experiments, we verify the convincing improvements of simulation accuracy of the fourth-order ABS method. In a realistic elastic 3-D scenario, the computing time reduces by a factor of approximately 2.4, whereas the memory requirements increase by approximately a factor of 2.2. The ABS method thus provides an alternative strategy to increase the simulation accuracy in time by investing computer memory instead of computing time.
- Open Access
- 1 January 2016
- Published by EAGE Publications bv
- p. 1-5
Individual and Joint 2-D Elastic Full Waveform Inversion of Rayleigh and Love Waves
- 1 January 2016
- Published by EAGE Publications bv
- p. 1-5
Open AccessIndividual and Joint 2-D Elastic Full Waveform Inversion of Rayleigh and Love Waves
- 1 January 2004
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 69 (2) , 583-591
Finite-difference modeling of viscoelastic and anisotropic wave propagation using the rotated staggered grid
We describe the application of the rotated staggered-grid (RSG) finite-difference technique to the wave equations for anisotropic and viscoelastic media. The RSG uses rotated finite-difference operators, leading to a distribution of modeling parameters in an elementary cell where all components of one physical property are located only at one single position. This can be advantageous for modeling wave propagation in anisotropic media or complex media, including high-contrast discontinuities, because no averaging of elastic moduli is needed. The RSG can be applied both to displacement-stress and to velocity-stress finite-difference (FD) schemes, whereby the latter are commonly used to model viscoelastic wave propagation. With a von Neumann-style anlysis, we estimate the dispersion error of the RSG scheme in general anisotropic media. In three different simulation examples, all based on previously published problems, we demonstrate the application and the accuracy of the proposed numerical approach.
- 1 January 2004
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 69 (2) , 583-591
Finite-difference modeling of viscoelastic and anisotropic wave propagation using the rotated staggered grid
We describe the application of the rotated staggered-grid (RSG) finite-difference technique to the wave equations for anisotropic and viscoelastic media. The RSG uses rotated finite-difference operators, leading to a distribution of modeling parameters in an elementary cell where all components of one physical property are located only at one single position. This can be advantageous for modeling wave propagation in anisotropic media or complex media, including high-contrast discontinuities, because no averaging of elastic moduli is needed. The RSG can be applied both to displacement-stress and to velocity-stress finite-difference (FD) schemes, whereby the latter are commonly used to model viscoelastic wave propagation. With a von Neumann-style anlysis, we estimate the dispersion error of the RSG scheme in general anisotropic media. In three different simulation examples, all based on previously published problems, we demonstrate the application and the accuracy of the proposed numerical approach.