Jan Gunnink
Research Subjects
Research Interests
Jan Gunnink has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Gualbert H. P. Oude Essink
Unit Subsurface and Groundwater Systems, Deltares, P.O. Box 85467, 3508 AL, Utrecht, The Netherlands
4 shared publications Hung Van Pham
Division of Water Resources Planning and Investigation for the South of Vietnam (DWRPIS), Ho Chi Minh City, Vietnam
4 shared publications- Marc F. P. Bierkens
Utrecht University
4 shared publications Denise Maljers
2 shared publications- Freek S. Busschers
TNO - Geological Survey of the Netherlands, Princetonlaan 6, 3584 CB Utrecht, The Netherlands
2 shared publications - Hans Doornenbal
Geological Survey of the Netherlands, Princetonlaan 6, 3584CB Utrecht, The Netherlands
2 shared publications
Latest Publications
- Open Access
- 8 January 2025
- Published by Amsterdam University Press
GotNL_Chapter24_GIS.zip
GIS files belonging to the figures of Chapter 24 - Geological subsurface models of the Netherlands, in Geology of the Netherlands (second edition).
- 8 January 2025
- Published by Amsterdam University Press
Open AccessGotNL_Chapter24_GIS.zip
GIS files belonging to the figures of Chapter 24 - Geological subsurface models of the Netherlands, in Geology of the Netherlands (second edition).
- Open Access
- 8 January 2025
- Published by Amsterdam University Press
GotNL_Chapter24_GIS.zip
GIS files belonging to the figures of Chapter 24 - Geological subsurface models of the Netherlands, in Geology of the Netherlands (second edition).
- 8 January 2025
- Published by Amsterdam University Press
Open AccessGotNL_Chapter24_GIS.zip
GIS files belonging to the figures of Chapter 24 - Geological subsurface models of the Netherlands, in Geology of the Netherlands (second edition).
- Open Access
- 30 June 2023
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Earth Surface
- Vol. 128 (7)
Disentangling Shallow Subsidence Sources by Data Assimilation in a Reclaimed Urbanized Coastal Plain, South Flevoland Polder, the Netherlands
This research targets disentangling shallow causes of anthropogenically induced subsidence in a reclaimed and urbanized coastal plain. The study area is the city of Almere, in the South Flevoland polder, the Netherlands, which is among the countries' fastest subsiding areas. The procedure consists of integrating Interferometric Synthetic Aperture Radar (InSAR) data with high‐resolution phreatic groundwater and lithoclass models, and a database containing construction details. The InSAR data were derived from Sentinel‐1, one ascending and one descending track, over a period from March 2015 until June 2020. The two main parts of the workflow are isolation of the InSAR points of structures without a pile foundation and a data assimilation procedure. The shrinkage of surficial clay beds by phreatic groundwater level lowering is identified as the main cause of subsidence in the area, with an average contribution of 6 mm per year. The history‐matched physics‐based model predicts that 1 m drop in phreatic groundwater level now translates into 10 mm of subsidence in the next 5 years. Additionally, a groundwater deficiency due to severe dry periods should be considered as an accelerator of subsidence. To ensure a robust network to estimate subsidence, we recommend a consistent monitoring strategy of the phreatic groundwater level.
- 30 June 2023
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Earth Surface
- Vol. 128 (7)
Open AccessDisentangling Shallow Subsidence Sources by Data Assimilation in a Reclaimed Urbanized Coastal Plain, South Flevoland Polder, the Netherlands
This research targets disentangling shallow causes of anthropogenically induced subsidence in a reclaimed and urbanized coastal plain. The study area is the city of Almere, in the South Flevoland polder, the Netherlands, which is among the countries' fastest subsiding areas. The procedure consists of integrating Interferometric Synthetic Aperture Radar (InSAR) data with high‐resolution phreatic groundwater and lithoclass models, and a database containing construction details. The InSAR data were derived from Sentinel‐1, one ascending and one descending track, over a period from March 2015 until June 2020. The two main parts of the workflow are isolation of the InSAR points of structures without a pile foundation and a data assimilation procedure. The shrinkage of surficial clay beds by phreatic groundwater level lowering is identified as the main cause of subsidence in the area, with an average contribution of 6 mm per year. The history‐matched physics‐based model predicts that 1 m drop in phreatic groundwater level now translates into 10 mm of subsidence in the next 5 years. Additionally, a groundwater deficiency due to severe dry periods should be considered as an accelerator of subsidence. To ensure a robust network to estimate subsidence, we recommend a consistent monitoring strategy of the phreatic groundwater level.
- Open Access
- 15 May 2023
- Published by Copernicus GmbH
tTEM: experiences in the Netherlands of this novel Electro Magnetic data acquisition technique
A novel way of collecting electromagnetic measurements makes use of an All Terrain Vehicle (ATV) that pulls a transmitter and receiver. This so-called towed Transient Electro Magnetics system (tTEM, described in detail by Auken et al, 2019) provide a fast way to obtain 3-dimensional images of the electrical resistivity of the subsurface. The unprecedented and speedy spatial coverage that can be obtained by the technique is a clear advantage over other land-based EM techniques. The technique acquires data with a speed of 10-15km/h, resulting in large coverages per day in open terrain (meadows, agricultural fields). The depth of investigation varies from 60 – 100m, depending on the characteristics of the subsurface (resistive or conductive). We present results here that are taken from various projects in the Netherlands, ranging from mapping buried glacial valleys, continuity of clay layers for groundwater protection, trying to detect faults and to investigate the lateral extent of Holocene clay deposits for dike reinforcements studies. We find the application of the tTEM technique for characterizing typical Dutch subsurface very useful, providing excellent insight in the 3D distribution of clay layers.Auken, Esben, Nikolaj Foged, Jakob Juul Larsen, Knud Valdemar Trøllund Lassen, Pradip Kumar Maurya, Søren Møller Dath, and Tore Tolstrup Eiskjær, (2019), "tTEM — A towed transient electromagnetic system for detailed 3D imaging of the top 70 m oaf the subsurface," GEOPHYSICS 84: E13-E22. https://doi.org/10.1190/geo2018-0355.1.
- 15 May 2023
- Published by Copernicus GmbH
Open AccesstTEM: experiences in the Netherlands of this novel Electro Magnetic data acquisition technique
A novel way of collecting electromagnetic measurements makes use of an All Terrain Vehicle (ATV) that pulls a transmitter and receiver. This so-called towed Transient Electro Magnetics system (tTEM, described in detail by Auken et al, 2019) provide a fast way to obtain 3-dimensional images of the electrical resistivity of the subsurface. The unprecedented and speedy spatial coverage that can be obtained by the technique is a clear advantage over other land-based EM techniques. The technique acquires data with a speed of 10-15km/h, resulting in large coverages per day in open terrain (meadows, agricultural fields). The depth of investigation varies from 60 – 100m, depending on the characteristics of the subsurface (resistive or conductive). We present results here that are taken from various projects in the Netherlands, ranging from mapping buried glacial valleys, continuity of clay layers for groundwater protection, trying to detect faults and to investigate the lateral extent of Holocene clay deposits for dike reinforcements studies. We find the application of the tTEM technique for characterizing typical Dutch subsurface very useful, providing excellent insight in the 3D distribution of clay layers.Auken, Esben, Nikolaj Foged, Jakob Juul Larsen, Knud Valdemar Trøllund Lassen, Pradip Kumar Maurya, Søren Møller Dath, and Tore Tolstrup Eiskjær, (2019), "tTEM — A towed transient electromagnetic system for detailed 3D imaging of the top 70 m oaf the subsurface," GEOPHYSICS 84: E13-E22. https://doi.org/10.1190/geo2018-0355.1.
- Open Access
- 12 July 2021
- Published by Copernicus GmbH in Earth System Science Data
- Vol. 13 (7) , 3297-3319
The three-dimensional groundwater salinity distribution and fresh groundwater volumes in the Mekong Delta, Vietnam, inferred from geostatistical analyses
Over the last decades, economic developments in the Vietnamese Mekong Delta have led to a sharp increase in groundwater pumping for domestic, agricultural and industrial use. This has resulted in alarming rates of land subsidence and groundwater salinization. Effective groundwater management, including strategies to work towards sustainable groundwater use, requires knowledge about the current groundwater salinity distribution, in particular the available volumes of fresh groundwater. At the moment, no comprehensive dataset of the spatial distribution of fresh groundwater is available. To create a 3D model of total dissolved solids (TDS), an existing geological model of the spatial distribution and thickness of the aquifers and aquitards is updated. Next, maps of drainable porosity for each aquifer are interpolated based on the sedimentological description of the borehole data. Measured TDS in groundwater, inferred TDS from resistivity measurements in boreholes and soft incomplete data (derived from measurements in boreholes and data from domestic wells) are combined in an indicator kriging routine to obtain the full probability distribution of TDS for each (x,y,z) location. This statistical distribution of TDS combined with drainable porosity yields estimates of the volume of fresh groundwater (TDS < 1 g L−1) in each aquifer. Uncertainty estimates of these volumes follow from a Monte Carlo analysis (sequential indicator simulation). Results yield an estimated fresh groundwater volume for the Mekong Delta of 867 billion cubic metres with an uncertainty range of 830–900 billion cubic metres, which is somewhat higher than previous assessments of fresh groundwater volumes. The resulting dataset can for instance be used in groundwater flow and salt transport modelling as well as aquifer storage and recovery projects to support informed groundwater management decisions, e.g. to prevent further salinization of the Mekong Delta groundwater system and land subsidence, and is available at https://doi.org/10.5281/zenodo.4441776 (Gunnink et al., 2021).
- 12 July 2021
- Published by Copernicus GmbH in Earth System Science Data
- Vol. 13 (7) , 3297-3319
Open AccessThe three-dimensional groundwater salinity distribution and fresh groundwater volumes in the Mekong Delta, Vietnam, inferred from geostatistical analyses
Over the last decades, economic developments in the Vietnamese Mekong Delta have led to a sharp increase in groundwater pumping for domestic, agricultural and industrial use. This has resulted in alarming rates of land subsidence and groundwater salinization. Effective groundwater management, including strategies to work towards sustainable groundwater use, requires knowledge about the current groundwater salinity distribution, in particular the available volumes of fresh groundwater. At the moment, no comprehensive dataset of the spatial distribution of fresh groundwater is available. To create a 3D model of total dissolved solids (TDS), an existing geological model of the spatial distribution and thickness of the aquifers and aquitards is updated. Next, maps of drainable porosity for each aquifer are interpolated based on the sedimentological description of the borehole data. Measured TDS in groundwater, inferred TDS from resistivity measurements in boreholes and soft incomplete data (derived from measurements in boreholes and data from domestic wells) are combined in an indicator kriging routine to obtain the full probability distribution of TDS for each (x,y,z) location. This statistical distribution of TDS combined with drainable porosity yields estimates of the volume of fresh groundwater (TDS < 1 g L−1) in each aquifer. Uncertainty estimates of these volumes follow from a Monte Carlo analysis (sequential indicator simulation). Results yield an estimated fresh groundwater volume for the Mekong Delta of 867 billion cubic metres with an uncertainty range of 830–900 billion cubic metres, which is somewhat higher than previous assessments of fresh groundwater volumes. The resulting dataset can for instance be used in groundwater flow and salt transport modelling as well as aquifer storage and recovery projects to support informed groundwater management decisions, e.g. to prevent further salinization of the Mekong Delta groundwater system and land subsidence, and is available at https://doi.org/10.5281/zenodo.4441776 (Gunnink et al., 2021).
- Open Access
- 2 March 2021
- Published by Copernicus GmbH in EGUsphere
- Vol. 2021, 1-31
The 3D groundwater salinity distribution and fresh groundwater volumes in the Mekong Delta, Vietnam, inferred from geostatistical analyses
Over the last decades, economic developments in the Vietnamese Mekong delta have led to a sharp increase in groundwater pumping for domestic, agricultural and industrial use. This has resulted in alarming rates of land subsidence and groundwater salinization. Effective groundwater management, including strategies to work towards sustainable groundwater use, requires knowledge about the current groundwater salinity distribution, in particular the available volumes of fresh groundwater. At the moment, no comprehensive dataset of the spatial distribution of fresh groundwater is available. To create a 3D model of Total Dissolved Solids (TDS), an existing geological model of the spatial distribution and thickness of the aquifers and aquitards is updated. Next, based on the sedimentological description of the borehole data, maps of drainable porosity for each aquifer are interpolated. Measured TDS in groundwater, inferred TDS from resistivity measurements in boreholes and soft incomplete data from domestic wells are combined in an indicator kriging routine to obtain the full probability distribution of TDS for each (x,y,z) location. This statistical distribution of TDS combined with drainable porosity yields estimates of the volume of fresh groundwater (TDS < 1 g/L) in each aquifer. Uncertainty estimates of these volumes follow from a Monte Carlo analysis (sequential indicator simulation). Results yield an estimated fresh groundwater volume for the Mekong delta of 867 billion m3 with an uncertainty range of 830–900 billion m3, which is somewhat higher than previous assessments of fresh groundwater volumes. The resulting dataset can be used to support informed groundwater management decisions, e.g. to prevent further salinization of aquifers and land subsidence and are available at https://doi.org/10.5281/zenodo.4441776 (Gunnink et al, 2021).
- 2 March 2021
- Published by Copernicus GmbH in EGUsphere
- Vol. 2021, 1-31
Open AccessThe 3D groundwater salinity distribution and fresh groundwater volumes in the Mekong Delta, Vietnam, inferred from geostatistical analyses
Over the last decades, economic developments in the Vietnamese Mekong delta have led to a sharp increase in groundwater pumping for domestic, agricultural and industrial use. This has resulted in alarming rates of land subsidence and groundwater salinization. Effective groundwater management, including strategies to work towards sustainable groundwater use, requires knowledge about the current groundwater salinity distribution, in particular the available volumes of fresh groundwater. At the moment, no comprehensive dataset of the spatial distribution of fresh groundwater is available. To create a 3D model of Total Dissolved Solids (TDS), an existing geological model of the spatial distribution and thickness of the aquifers and aquitards is updated. Next, based on the sedimentological description of the borehole data, maps of drainable porosity for each aquifer are interpolated. Measured TDS in groundwater, inferred TDS from resistivity measurements in boreholes and soft incomplete data from domestic wells are combined in an indicator kriging routine to obtain the full probability distribution of TDS for each (x,y,z) location. This statistical distribution of TDS combined with drainable porosity yields estimates of the volume of fresh groundwater (TDS < 1 g/L) in each aquifer. Uncertainty estimates of these volumes follow from a Monte Carlo analysis (sequential indicator simulation). Results yield an estimated fresh groundwater volume for the Mekong delta of 867 billion m3 with an uncertainty range of 830–900 billion m3, which is somewhat higher than previous assessments of fresh groundwater volumes. The resulting dataset can be used to support informed groundwater management decisions, e.g. to prevent further salinization of aquifers and land subsidence and are available at https://doi.org/10.5281/zenodo.4441776 (Gunnink et al, 2021).
- 1 August 2014
- Published by Wiley in Near Surface Geophysics
- Vol. 13 (1) , 45-60
Applying airborne electromagnetics in 3D stochastic geohydrological modelling for determining groundwater protection
Airborne electromagnetic (AEM) measurements provide information regarding the electrical properties of the subsurface for large spatial coverage in a limited time. In mapping and modelling for geological and geohydrological purposes, electrical properties (e.g. resistivity) need to be converted to relevant parameters, like lithology. Helicopter‐borne frequency‐domain EM measurements from an area in the Netherlands were combined with borehole data to create a 3D model of two contrasting lithologies (sand and clay) that served as proxy for assessing the vulnerability of the aquifer to surface contamination. By comparing the lithology found in boreholes with the resistivity derived from AEM at that location, a probabilistic relationship between these two variables was determined. This relationship was used to convert the AEM resistivity models into a 3D model of clay probability. Using geostatistical Monte Carlo simulations, the boreholes (hard data) and the probability of clay from the AEM resistivity models (soft data) were combined. AEM improved the 3D model substantially, compared to using only borehole data. An independent validation dataset verified the improvement of the 3D model using AEM data. Areas with a high probability of clay occurrence could be distinguished and a clay thickness map with uncertainty (standard deviation) was calculated. Using a simple groundwater model, the capability of the clay to protect the underlying aquifer from contamination was quantified. This resulted in the delineation of distinct areas that are well protected due to the large travel time for infiltrating water from the surface to the aquifer.
- 1 August 2014
- Published by Wiley in Near Surface Geophysics
- Vol. 13 (1) , 45-60
Applying airborne electromagnetics in 3D stochastic geohydrological modelling for determining groundwater protection
Airborne electromagnetic (AEM) measurements provide information regarding the electrical properties of the subsurface for large spatial coverage in a limited time. In mapping and modelling for geological and geohydrological purposes, electrical properties (e.g. resistivity) need to be converted to relevant parameters, like lithology. Helicopter‐borne frequency‐domain EM measurements from an area in the Netherlands were combined with borehole data to create a 3D model of two contrasting lithologies (sand and clay) that served as proxy for assessing the vulnerability of the aquifer to surface contamination. By comparing the lithology found in boreholes with the resistivity derived from AEM at that location, a probabilistic relationship between these two variables was determined. This relationship was used to convert the AEM resistivity models into a 3D model of clay probability. Using geostatistical Monte Carlo simulations, the boreholes (hard data) and the probability of clay from the AEM resistivity models (soft data) were combined. AEM improved the 3D model substantially, compared to using only borehole data. An independent validation dataset verified the improvement of the 3D model using AEM data. Areas with a high probability of clay occurrence could be distinguished and a clay thickness map with uncertainty (standard deviation) was calculated. Using a simple groundwater model, the capability of the clay to protect the underlying aquifer from contamination was quantified. This resulted in the delineation of distinct areas that are well protected due to the large travel time for infiltrating water from the surface to the aquifer.
- 1 April 2013
- Published by Netherlands Journal of Geosciences Foundation in Netherlands Journal of Geosciences
- Vol. 92 (1) , 33-46
Digital Geological Model (DGM): a 3D raster model of the subsurface of the Netherlands
A 3D geological raster model has been constructed of the onshore of the Netherlands. The model displays geological units for the upper 500 m in 3D in an internally consistent way. The units are based on the lithostratigraphical classification of the Netherlands. This classification is used to interpret a selection of boreholes from the national subsurface database. Additional geological information regarding faults, the areal extent of each unit and conceptual genetic models have been combined in an automated workflow to interpolate the basal surfaces of each unit on 100 × 100 metre (x,y dimensions) raster cells. The combination of all interpolated basal surfaces results in a 3D Digital Geological Model (DGM) of the subsurface. A measure of uncertainty of each of these surfaces is also given. The automated workflow ensures an easily updatable subsurface model. The outputs are available for end users throughwww.dinoloket.nl.
- 1 April 2013
- Published by Netherlands Journal of Geosciences Foundation in Netherlands Journal of Geosciences
- Vol. 92 (1) , 33-46
Digital Geological Model (DGM): a 3D raster model of the subsurface of the Netherlands
A 3D geological raster model has been constructed of the onshore of the Netherlands. The model displays geological units for the upper 500 m in 3D in an internally consistent way. The units are based on the lithostratigraphical classification of the Netherlands. This classification is used to interpret a selection of boreholes from the national subsurface database. Additional geological information regarding faults, the areal extent of each unit and conceptual genetic models have been combined in an automated workflow to interpolate the basal surfaces of each unit on 100 × 100 metre (x,y dimensions) raster cells. The combination of all interpolated basal surfaces results in a 3D Digital Geological Model (DGM) of the subsurface. A measure of uncertainty of each of these surfaces is also given. The automated workflow ensures an easily updatable subsurface model. The outputs are available for end users throughwww.dinoloket.nl.