Ugur Guven
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ugur Guven has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Rajesh Yadav
Department of Aerospace Engineering, University of Petroleum and Energy Studies, Dehradun, India
4 shared publications - Gurunadh Velidi
University of Petroleum and Energy Studies
3 shared publications Chan-Su Yang
2 shared publications- Palanisamy Shanmugam
Ocean Optics and Imaging Laboratory, Department of Ocean Engineering, Indian Institute of Technology Madras, Chennai 600036, India
2 shared publications - Sudhir Kumar Chaturvedi
University of Petroleum & Energy Studies (UPES)
2 shared publications Pankaj Kumar Srivastava
1 shared publication
Latest Publications
- 19 September 2017
- Published by Morressier GmbH
Ideal Education Template for Undergraduate Space Engineering for Advancement of Global Space Community
Welcome to the largest platform for early-stage research
- 19 September 2017
- Published by Morressier GmbH
Ideal Education Template for Undergraduate Space Engineering for Advancement of Global Space Community
Welcome to the largest platform for early-stage research
- 25 June 2016
- Published by Current Science Association in Current Science
- Vol. 110 (12) , 2292
Measurement of Tsunami Wave Eigenfunctions in Deep, Intermediate and Shallower Regions
- 25 June 2016
- Published by Current Science Association in Current Science
- Vol. 110 (12) , 2292
Measurement of Tsunami Wave Eigenfunctions in Deep, Intermediate and Shallower Regions
- 1 January 2015
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Spacecraft and Rockets
- Vol. 52 (1) , 157-165
Aerodynamic Heating of a Hypersonic Projectile with Forward-Facing Ellipsoid Cavity at Nose
Numerical experiments are carried out using a commercially available computational-fluid-dynamics code to investigate the aerodynamic heating of a hemisphere–cylinder with a forward-facing ellipsoid cavity at nose in atmosphere. A wide range ellipsoid cavity of depths varying between 3 to 30 mm placed axisymmetrically at the nose of the blunt body with base diameter 40 mm and overall length 70 mm have been investigated. The ratios of semimajor axis to semiminor axis of these cavities (a/b) are 3, 2, or 1.5, where semimajor axis a is equal to the depth of cavity d and the semiminor axis b is close to the lip radius r of the cavity. All computations have been done at a freestream Mach number of 10.1 and static pressure and temperature of 16,066 Pa and 216.65 K respectively. The steady-state solutions of axisymmetric Navier–Stokes equations are obtained using a time marching approach in order to study the aerodynamic heating of a hypersonic projectile with a forward-facing ellipsoid cavity at a nose. The sim...
- 1 January 2015
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Spacecraft and Rockets
- Vol. 52 (1) , 157-165
Aerodynamic Heating of a Hypersonic Projectile with Forward-Facing Ellipsoid Cavity at Nose
Numerical experiments are carried out using a commercially available computational-fluid-dynamics code to investigate the aerodynamic heating of a hemisphere–cylinder with a forward-facing ellipsoid cavity at nose in atmosphere. A wide range ellipsoid cavity of depths varying between 3 to 30 mm placed axisymmetrically at the nose of the blunt body with base diameter 40 mm and overall length 70 mm have been investigated. The ratios of semimajor axis to semiminor axis of these cavities (a/b) are 3, 2, or 1.5, where semimajor axis a is equal to the depth of cavity d and the semiminor axis b is close to the lip radius r of the cavity. All computations have been done at a freestream Mach number of 10.1 and static pressure and temperature of 16,066 Pa and 216.65 K respectively. The steady-state solutions of axisymmetric Navier–Stokes equations are obtained using a time marching approach in order to study the aerodynamic heating of a hypersonic projectile with a forward-facing ellipsoid cavity at a nose. The sim...
- Retraction
- 4 June 2014
- Published by Cambridge University Press (CUP) in Journal of Navigation
- Vol. 67 (5) , 927
Detection of Ocean Wave Parameters Using Synthetic Aperture Radar (SAR) Data – RETRACTION
- 4 June 2014
- Published by Cambridge University Press (CUP) in Journal of Navigation
- Vol. 67 (5) , 927
RetractionDetection of Ocean Wave Parameters Using Synthetic Aperture Radar (SAR) Data – RETRACTION
- 1 March 2014
- Published by Elsevier in Acta Astronautica
- Vol. 96, 1-10
Aerothermodynamics of generic re-entry vehicle with a series of aerospikes at nose
- 1 March 2014
- Published by Elsevier in Acta Astronautica
- Vol. 96, 1-10
Aerothermodynamics of generic re-entry vehicle with a series of aerospikes at nose
- 6 December 2013
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 228 (10) , 1863-1874
Aerothermodynamics of a hypersonic vehicle with a forward-facing parabolic cavity at nose
Numerical experiments are carried out using commercially available Navier–Stokes solver to investigate the effect of forward-facing parabolic cavity on the heat fluxes over a spherical nosed blunt body. A wide range of parabolic cavities with depths varying between 2 and 10 mm placed at the nose of sphere-cylinder with base diameter 40 mm and overall length 70 mm have been investigated. The ratio of the cavity radius at intersection with y-axis to depth of cavity (r/d) of these cavities varies from 1.5 to 2.5. All computations have been done at a freestream Mach number of 6.2 and sea level atmospheric conditions assuming air to be a thermally perfect gas. The steady-state solutions obtained through time marching solution of axisymmetric Navier–Stokes equations suggest that the total heat transfer rate, area weighted average heat flux and the peak heat fluxes to the body can be favorably reduced for shallow parabolic cavities.
- 6 December 2013
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 228 (10) , 1863-1874
Aerothermodynamics of a hypersonic vehicle with a forward-facing parabolic cavity at nose
Numerical experiments are carried out using commercially available Navier–Stokes solver to investigate the effect of forward-facing parabolic cavity on the heat fluxes over a spherical nosed blunt body. A wide range of parabolic cavities with depths varying between 2 and 10 mm placed at the nose of sphere-cylinder with base diameter 40 mm and overall length 70 mm have been investigated. The ratio of the cavity radius at intersection with y-axis to depth of cavity (r/d) of these cavities varies from 1.5 to 2.5. All computations have been done at a freestream Mach number of 6.2 and sea level atmospheric conditions assuming air to be a thermally perfect gas. The steady-state solutions obtained through time marching solution of axisymmetric Navier–Stokes equations suggest that the total heat transfer rate, area weighted average heat flux and the peak heat fluxes to the body can be favorably reduced for shallow parabolic cavities.
- 27 January 2013
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- Vol. 117 (1195) , 913-928
Aerothermodynamics of a hypersonic projectile with a double-disk aerospike
The use of aerospikes at the nose of a hypersonic vehicle can substantially reduce its drag; however, the associated heat flux at the reattachment point is very high for turbulent flows. In this paper, the aerothermodynamics of a generic projectile model represented by a hemisphere- cylinder, fitted axisymmetrically with an aerospike at the nose is investigated numerically with a commercially available Navier Stokes Solver. The base model is a hemisphere-cylinder with a diameter of 40mm and an overall length of 70mm. An aerospike protrudes axisymmetrically at the nose of the base model and has a hemispherical cap from which another aerospike protrudes which again has a hemispherical cap, thus forming a double-disk aerospike. Compressible, axisymmetric Navier-Stokes Equations are solved for turbulent hypersonic flow of thermally perfect air with free stream conditions of Mach No 6·2 at standard sea level atmospheric conditions. The results for the model with double-disk aerospikes are compared with those of hemisphere-cylinder without aerospike. The results suggest that the use of double-disk aerospike can favourably reduce the turbulent reattachment heat flux along with suitable drag reduction of the main body.
- 27 January 2013
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- Vol. 117 (1195) , 913-928
Aerothermodynamics of a hypersonic projectile with a double-disk aerospike
The use of aerospikes at the nose of a hypersonic vehicle can substantially reduce its drag; however, the associated heat flux at the reattachment point is very high for turbulent flows. In this paper, the aerothermodynamics of a generic projectile model represented by a hemisphere- cylinder, fitted axisymmetrically with an aerospike at the nose is investigated numerically with a commercially available Navier Stokes Solver. The base model is a hemisphere-cylinder with a diameter of 40mm and an overall length of 70mm. An aerospike protrudes axisymmetrically at the nose of the base model and has a hemispherical cap from which another aerospike protrudes which again has a hemispherical cap, thus forming a double-disk aerospike. Compressible, axisymmetric Navier-Stokes Equations are solved for turbulent hypersonic flow of thermally perfect air with free stream conditions of Mach No 6·2 at standard sea level atmospheric conditions. The results for the model with double-disk aerospikes are compared with those of hemisphere-cylinder without aerospike. The results suggest that the use of double-disk aerospike can favourably reduce the turbulent reattachment heat flux along with suitable drag reduction of the main body.
- Retracted
- 17 December 2012
- Published by Cambridge University Press (CUP) in Journal of Navigation
- Vol. 66 (2) , 283-293
Detection of Ocean Wave Parameters Using Synthetic Aperture Radar (SAR) Data
This study describes the estimation of spherical wave parameters that appears in Synthetic Aperture Radar (SAR) images acquired over the coast of Chukk, Micronesia. The main causes for the interaction of SAR signals with ocean waves can be retrieved through the Bragg scattering mechanism. Dominant wavelengths were retrieved by means of Fast Fourier Transform (FFT) analysis in terms of peak frequency responses. Sea surface slopes were then obtained from the dispersion relation with consideration of different water wave conditions for each subset area, and wave heights were estimated with the use of dominant wavelengths and sea surface slopes. The work presented in this paper may be useful to retrieve the various wave parameters over different regions. The method used is a novel technique to correlate the relationship between SAR image parameters and dispersion relation.
- 17 December 2012
- Published by Cambridge University Press (CUP) in Journal of Navigation
- Vol. 66 (2) , 283-293
RetractedDetection of Ocean Wave Parameters Using Synthetic Aperture Radar (SAR) Data
This study describes the estimation of spherical wave parameters that appears in Synthetic Aperture Radar (SAR) images acquired over the coast of Chukk, Micronesia. The main causes for the interaction of SAR signals with ocean waves can be retrieved through the Bragg scattering mechanism. Dominant wavelengths were retrieved by means of Fast Fourier Transform (FFT) analysis in terms of peak frequency responses. Sea surface slopes were then obtained from the dispersion relation with consideration of different water wave conditions for each subset area, and wave heights were estimated with the use of dominant wavelengths and sea surface slopes. The work presented in this paper may be useful to retrieve the various wave parameters over different regions. The method used is a novel technique to correlate the relationship between SAR image parameters and dispersion relation.
- 24 October 2011
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 110-116, 2054-2061
Nuclear Fusion and the Moon as a Source of Power for the World - Possibility of 3He Fusion and the International Quest for the Moon
One of the biggest challenges that the world faces is definitely the need for more energy. As the world’s fossil fuel supplies dwindle down, it becomes more and more important to find clean sources of energy that can also fulfill the global demand for more energy. Fortunately, aerospace technology can be of use, as the moon can be used to harvest 3He, which can be a clean source of nuclear fuel for fusion reaction on Earth, as well as on the moon. This paper will demonstrate that the concept of moon mining needs to be explored further as 3He can be of great use for solving the world’s energy needs.
- 24 October 2011
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 110-116, 2054-2061
Nuclear Fusion and the Moon as a Source of Power for the World - Possibility of 3He Fusion and the International Quest for the Moon
One of the biggest challenges that the world faces is definitely the need for more energy. As the world’s fossil fuel supplies dwindle down, it becomes more and more important to find clean sources of energy that can also fulfill the global demand for more energy. Fortunately, aerospace technology can be of use, as the moon can be used to harvest 3He, which can be a clean source of nuclear fuel for fusion reaction on Earth, as well as on the moon. This paper will demonstrate that the concept of moon mining needs to be explored further as 3He can be of great use for solving the world’s energy needs.