SMSeitaro Mitsudo

Seitaro Mitsudo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Seitaro Mitsudo has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Gyrotrons as Promising Radiation Sources for THz Sensing and Imaging

    by Toshitaka Idehara, Svilen Petrov Sabchevski, Mikhail Glyavin, Seitaro Mitsudo

    The gyrotrons are powerful sources of coherent radiation that can operate in both pulsed and CW (continuous wave) regimes. Their recent advancement toward higher frequencies reached the terahertz (THz) region and opened the road to many new applications in the broad fields of high-power terahertz science and technologies. Among them are advanced spectroscopic techniques, most notably NMR-DNP (nuclear magnetic resonance with signal enhancement through dynamic nuclear polarization, ESR (electron spin resonance) spectroscopy, precise spectroscopy for measuring the HFS (hyperfine splitting) of positronium, etc. Other prominent applications include materials processing (e.g., thermal treatment as well as the sintering of advanced ceramics), remote detection of concealed radioactive materials, radars, and biological and medical research, just to name a few. Among prospective and emerging applications that utilize the gyrotrons as radiation sources are imaging and sensing for inspection and control in various technological processes (for example, food production, security, etc). In this paper, we overview the current status of the research in this field and show that the gyrotrons are promising radiation sources for THz sensing and imaging based on both the existent and anticipated novel techniques and methods.


  • Open Access

    Formation and Particle Growth of TiO2 in Silica Xerogel Glass Ceramic During a Sintering Process

    by H Aripin, Joni I Made, Seitaro Mitsudo, Sudiana I Nyoman, Edvin Priatna, Nundang Busaeri, Svilen Sabchevski

    This investigation presents the synthesis procedure and the results of an investigation of the crystallite growth of TiO2 and the formation of Si–O–Ti bonds in novel silica xerogel (SiO2) glass ceramic produced from an amorphous SX derived from sago waste ash. The composition had been prepared by adding various amounts of TiO2, from 20 wt% to 80 wt%, into the amorphous SiO2, and then a series of samples were sintered at 1200°C for 2 hours. The influence of the content of TiO2 and the sintering temperature on the properties of TiO2, namely crystallite size and formation of Si–O–Ti bonds, has been studied in detail. The properties of the produced ceramics have been characterized on the basis of the experimental data obtained using X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. It has been found that an addition of SiO2 confers an appreciable effect on the quantity of Si–O–Ti bonds. The interpretation of the XRD pattern allows one to explain the increase in the crystallite size of rutile TiO2 by a decreased quantity of Si–O–Ti bonds.


  • Densification Behavior of SnO2-Glass Composites Developed from the Incorporate of Silica Xerogeland SnO2

    by H. Aripin, Seitaro Mitsudo, I Nyoman Sudiana, Edvin Priatna, Hikamitsu Kikuchi, Svilen Sabchevski

    In this investigation, SnO2-glass composites were produced by mixing SnO2 and amorphous silica xerogel (SX) extracted from sago waste ash. The composition was prepared by adding 5 mol% of SnO2 into SX; the samples were dry pressed and sintered in a temperature range between room temperature and 1500oC. Their properties were characterized on the basis of the experimental data obtained using Archimedes’ principle, X-ray diffraction (XRD), Fourier transformed infra-red (FTIR), and a scanning electron microscopy (SEM). It was found that the bulk density increased along with the sintering temperature. In the temperature range from 1300oC to 1500oC, the glass ceramic reached a bulk density of about 2.5 g/cm3. The results of the interpretation of XRD patterns, FTIR spectra, and SEM images allow us to conclude that this increase in density was due to an increased degree of crystallinity of SnO2 in the silica xerogel composite. Keywords: Amorphous silica xerogel; Density; Glass composite; Sintering temperature; SnO2 Published at: IJTech Vol 7, No 3 (2016) DOI: http://dx.doi.org/10.14716/ijtech.v7i3.2903

  • High thermal behavior of a new glass ceramic developed from silica xerogel/SnO2 composite

    by H. Aripin, Seitaro Mitsudo, I. Nyoman Sudiana, Edvin Priatna, Svilen Sabchevski

    In this investigation, a new glass ceramics have been produced by mixing SnO2 and amorphous silica xerogel (ASX) extracted from sago waste ash. The composition has been prepared by adding 10 mol% of SnO2 into SX. The samples have been dry pressed and sintered in the temperature range between 800 °C and 1500 °C. The effects of temperature on the crystallization of silica xerogel after adding SnO2 and their relationship to bulk density have been studied. The crystallization process of the silica xerogel/SnO2 composite has been examined by an X-ray diffraction (XRD) and the bulk density has been characterized on the basis of the experimental data obtained using Archimedes′ principle. It has been found that an addition of SnO2 confers an appreciable effect on the grain and from the interpretation of XRD patterns allow one to explain the increase in the density by an increased crystallite size of SnO2 in the composite.

  • Grain Growth in Millimeter Wave Sintered Alumina Ceramics

    by Seitaro Mitsudo, S. Inagaki, I. Nyoman Sudiana, K. Kuwayama

    The millimeter wave (MMW) sintering of alumina ceramic had been performed. The results revealed that MMW sintered alumina has higher density than that of conventional method on all sintering temperature. However microstructure evaluation demonstrates that grain growth of MM wave annealed alumina is faster than in conventional annealing. It indicates that MM wave enhanced mass transport and solid state reaction rates during sintering. The empirical observations of microwave enhancements have been broadly known as microwave effect. Even though no satisfactory theory existed to explain the effect but the presence the electromagnetic waves (EMW) during microwave heating is clearly the key. In this paper, microwave effect on grain growth of alumina ceramic is presented. Some effective and unique characteristics of the EMW sintering were also discussed as well.

  • Structural Characterization of Mullite-Based Ceramic Material from Al2O3 and Silica Xerogel Converted from Sago Waste Ash

    by Haji Aripin, Seitaro Mitsudo, Endangsusilowati S. Prima, Inyoman Nyoman Sudiana, Hikamitsu Kikuchi, Saboru Sano, Sliven Sabchevski