Amin Azari
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Amin Azari has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Cicek Cavdar
School of Electrical Engineering and Computer Science, KTH Royal Institute of Technology, Stockholm, Sweden
4 shared publications - Meysam Masoudi
School of Electrical Engineering and Computer Science, KTH Royal Institute of Technology, Stockholm, Sweden
4 shared publications - Petar Popovski
Department of Electronic Systems, Aalborg University, Aalborg, Denmark
4 shared publications - Cedomir Stefanovic
Aalborg University
3 shared publications - Guowang Miao
KTH Royal Institute of Technology
3 shared publications Cicek Cavdar
Electrical Engineering and Computer Science (EECS), KTH Royal Institute of Technology, Stockholm, Sweden
2 shared publications
Latest Publications
- 17 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Network and Service Management
- Vol. 20 (3) , 2412-2427
Reliable and Energy-Efficient IoT Systems: Design Considerations in Coexistence Deployments
Currently, there is a plethora of low-power wide-area IoT networking solutions available, each targeting a specific niche of use-cases and deployment scenarios. Existing studies on reliability evaluations of IoT solutions rely on the assumption that a single technology is deployed in the service area, or different IoT technologies operate over dedicated spectrum bands. Here, we investigate the reliability performance of IoT communications in coexisting scenarios, where multiple competing radio-access technologies share spectrum resources. Our focus is on solutions exploiting grant-free communications, which are gaining traction due to their potential to lower the energy consumption, and have been adopted in recent IoT technologies like SigFox and LoRa. We first derive an analytical model of the interference, comprising both inter-and intra-technology interference sources. We then leverage the Poisson Cluster Process for modeling distribution of devices in the service area, and derive expressions for the communication reliability, energy consumption, and battery lifetime of IoT devices. Exploiting these expressions, we study the energy-reliability trade-offs and investigate strategies to maintain or improve communication reliability, while minimizing energy consumption in coexisting scenarios by proper adjustment of communications parameters at the device side and provisioning resources at the network side. We verify the analytical results via numerical evaluations, confirming their accuracy and performing optimization in some example networking setups.
- 17 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Network and Service Management
- Vol. 20 (3) , 2412-2427
Reliable and Energy-Efficient IoT Systems: Design Considerations in Coexistence Deployments
Currently, there is a plethora of low-power wide-area IoT networking solutions available, each targeting a specific niche of use-cases and deployment scenarios. Existing studies on reliability evaluations of IoT solutions rely on the assumption that a single technology is deployed in the service area, or different IoT technologies operate over dedicated spectrum bands. Here, we investigate the reliability performance of IoT communications in coexisting scenarios, where multiple competing radio-access technologies share spectrum resources. Our focus is on solutions exploiting grant-free communications, which are gaining traction due to their potential to lower the energy consumption, and have been adopted in recent IoT technologies like SigFox and LoRa. We first derive an analytical model of the interference, comprising both inter-and intra-technology interference sources. We then leverage the Poisson Cluster Process for modeling distribution of devices in the service area, and derive expressions for the communication reliability, energy consumption, and battery lifetime of IoT devices. Exploiting these expressions, we study the energy-reliability trade-offs and investigate strategies to maintain or improve communication reliability, while minimizing energy consumption in coexisting scenarios by proper adjustment of communications parameters at the device side and provisioning resources at the network side. We verify the analytical results via numerical evaluations, confirming their accuracy and performing optimization in some example networking setups.
- Open Access
- 30 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 19 (10) , 10265-10276
Saving Energy and Spectrum in Enabling URLLC Services: A Scalable RL Solution
Communication systems supporting cyber-physical production applications should satisfy stringent delay and reliability requirements. Diversity techniques and power control are the main approaches to reduce latency and enhance the reliability of wireless communications at the expense of redundant transmissions and excessive resource usage. Focusing on the application layer reliability key performance indicators (KPIs), we design a deep reinforcement learning orchestrator for power control and hybrid automatic repeat request retransmissions to optimize these KPIs. Furthermore, to address the scalability issue that emerges in the per-device orchestration problem, we develop a new branching soft actor–critic framework, in which a separate branch represents the action space of each industrial device. Our orchestrator enables near-real-time control and can be implemented in the edge cloud. We test our solution with a Third Generation Partnership Project-compliant and realistic simulator for factory automation scenarios. Compared with the state of the art, our solution offers significant scalability gains in terms of computational time and memory requirements. Our extensive experiments show significant improvements in our target KPIs, over the state of the art, especially for fifth percentile user availability. To achieve these targets, our framework requires substantially less total energy or spectrum, thanks to our scalable reinforcement learning solution.
- 30 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 19 (10) , 10265-10276
Open AccessSaving Energy and Spectrum in Enabling URLLC Services: A Scalable RL Solution
Communication systems supporting cyber-physical production applications should satisfy stringent delay and reliability requirements. Diversity techniques and power control are the main approaches to reduce latency and enhance the reliability of wireless communications at the expense of redundant transmissions and excessive resource usage. Focusing on the application layer reliability key performance indicators (KPIs), we design a deep reinforcement learning orchestrator for power control and hybrid automatic repeat request retransmissions to optimize these KPIs. Furthermore, to address the scalability issue that emerges in the per-device orchestration problem, we develop a new branching soft actor–critic framework, in which a separate branch represents the action space of each industrial device. Our orchestrator enables near-real-time control and can be implemented in the edge cloud. We test our solution with a Third Generation Partnership Project-compliant and realistic simulator for factory automation scenarios. Compared with the state of the art, our solution offers significant scalability gains in terms of computational time and memory requirements. Our extensive experiments show significant improvements in our target KPIs, over the state of the art, especially for fifth percentile user availability. To achieve these targets, our framework requires substantially less total energy or spectrum, thanks to our scalable reinforcement learning solution.
- Top Cited Papers
- 11 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Surveys & Tutorials
- Vol. 24 (2) , 1117-1174
Cellular, Wide-Area, and Non-Terrestrial IoT: A Survey on 5G Advances and the Road Toward 6G
The next wave of wireless technologies is proliferating in connecting things among themselves as well as to humans. In the era of the Internet of things (IoT), billions of sensors, machines, vehicles, drones, and robots will be connected, making the world around us smarter. The IoT will encompass devices that must wirelessly communicate a diverse set of data gathered from the environment for myriad new applications. The ultimate goal is to extract insights from this data and develop solutions that improve quality of life and generate new revenue. Providing large-scale, long-lasting, reliable, and near real-time connectivity is the major challenge in enabling a smart connected world. This paper provides a comprehensive survey on existing and emerging communication solutions for serving IoT applications in the context of cellular, wide-area, as well as non-terrestrial networks. Specifically, wireless technology enhancements for providing IoT access in the fifth-generation (5G) and beyond cellular networks, and communication networks over the unlicensed spectrum are presented. Aligned with the main key performance indicators of 5G and beyond 5G networks, we investigate solutions and standards that enable energy efficiency, reliability, low latency, and scalability (connection density) of current and future IoT networks. The solutions include grant-free access and channel coding for short-packet communications, non-orthogonal multiple access, and on-device intelligence. Further, a vision of new paradigm shifts in communication networks in the 2030s is provided, and the integration of the associated new technologies like artificial intelligence, non-terrestrial networks, and new spectra is elaborated. In particular, the potential of using emerging deep learning and federated learning techniques for enhancing the efficiency and security of IoT communication are discussed, and their promises and challenges are introduced. Finally, future research directions toward beyond 5G IoT networks are pointed out.
- 11 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Surveys & Tutorials
- Vol. 24 (2) , 1117-1174
Top Cited PapersCellular, Wide-Area, and Non-Terrestrial IoT: A Survey on 5G Advances and the Road Toward 6G
The next wave of wireless technologies is proliferating in connecting things among themselves as well as to humans. In the era of the Internet of things (IoT), billions of sensors, machines, vehicles, drones, and robots will be connected, making the world around us smarter. The IoT will encompass devices that must wirelessly communicate a diverse set of data gathered from the environment for myriad new applications. The ultimate goal is to extract insights from this data and develop solutions that improve quality of life and generate new revenue. Providing large-scale, long-lasting, reliable, and near real-time connectivity is the major challenge in enabling a smart connected world. This paper provides a comprehensive survey on existing and emerging communication solutions for serving IoT applications in the context of cellular, wide-area, as well as non-terrestrial networks. Specifically, wireless technology enhancements for providing IoT access in the fifth-generation (5G) and beyond cellular networks, and communication networks over the unlicensed spectrum are presented. Aligned with the main key performance indicators of 5G and beyond 5G networks, we investigate solutions and standards that enable energy efficiency, reliability, low latency, and scalability (connection density) of current and future IoT networks. The solutions include grant-free access and channel coding for short-packet communications, non-orthogonal multiple access, and on-device intelligence. Further, a vision of new paradigm shifts in communication networks in the 2030s is provided, and the integration of the associated new technologies like artificial intelligence, non-terrestrial networks, and new spectra is elaborated. In particular, the potential of using emerging deep learning and federated learning techniques for enhancing the efficiency and security of IoT communication are discussed, and their promises and challenges are introduced. Finally, future research directions toward beyond 5G IoT networks are pointed out.
- 24 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Green Communications and Networking
- Vol. 6 (2) , 1107-1121
Ultra-Low-Power IoT Communications: A Novel Address Decoding Approach for Wake-Up Receivers
Providing energy-efficient Internet of Things (IoT) connectivity has attracted significant attention in fifth-generation (5G) wireless networks and beyond. A potential solution for realizing a long-lasting network of IoT devices is to equip each IoT device with a wake-up receiver (WuR) to have always-accessible devices instead of always-on devices. WuRs typically comprise a radio frequency demodulator, sequence decoder, and digital address decoder and are provided with a unique authentication address in the network. Although the literature on efficient demodulators is mature, it lacks research on fast, low-power, and reliable address decoders. As this module continuously monitors the received ambient energy for potential paging of the device, its contribution to WuR’s power consumption is crucial. Motivated by this need, a low-power, reliable address decoder is developed in this paper. We further investigate the integration of WuR in low-power uplink/downlink communications and, using system-level energy analysis; we characterize operation regions in which WuR can contribute significantly to energy saving. The device-level energy analysis confirms the superior performance of our decoder. The results show that the proposed decoder significantly outperforms the state-of-the-art with power consumption of 60 nW, at cost of compromising negligible increase in decoding delay.
- 24 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Green Communications and Networking
- Vol. 6 (2) , 1107-1121
Ultra-Low-Power IoT Communications: A Novel Address Decoding Approach for Wake-Up Receivers
Providing energy-efficient Internet of Things (IoT) connectivity has attracted significant attention in fifth-generation (5G) wireless networks and beyond. A potential solution for realizing a long-lasting network of IoT devices is to equip each IoT device with a wake-up receiver (WuR) to have always-accessible devices instead of always-on devices. WuRs typically comprise a radio frequency demodulator, sequence decoder, and digital address decoder and are provided with a unique authentication address in the network. Although the literature on efficient demodulators is mature, it lacks research on fast, low-power, and reliable address decoders. As this module continuously monitors the received ambient energy for potential paging of the device, its contribution to WuR’s power consumption is crucial. Motivated by this need, a low-power, reliable address decoder is developed in this paper. We further investigate the integration of WuR in low-power uplink/downlink communications and, using system-level energy analysis; we characterize operation regions in which WuR can contribute significantly to energy saving. The device-level energy analysis confirms the superior performance of our decoder. The results show that the proposed decoder significantly outperforms the state-of-the-art with power consumption of 60 nW, at cost of compromising negligible increase in decoding delay.
- 11 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Green Communications and Networking
- Vol. 6 (2) , 1082-1095
Energy and Resource Efficiency by User Traffic Prediction and Classification in Cellular Networks
There is a lack of research on the analysis of per-user traffic in cellular networks, for deriving and following traffic-aware network management. In fact, the legacy design approach, in which resource provisioning and operation control are performed based on the cell-aggregated traffic scenarios, are not so energy- and cost-efficient and need to be substituted with user-centric predictive analysis of mobile network traffic and proactive network resource management. Here, we shed light on this problem by designing traffic prediction tools that utilize standard machine learning (ML) tools, including long short-term memory (LSTM) and autoregressive integrated moving average (ARIMA) on top of per-user data. We present an expansive empirical evaluation of the designed solutions over a real network traffic dataset. Within this analysis, the impact of different parameters, such as the time granularity, the length of future predictions, and feature selection are investigated. As a potential application of these solutions, we present an ML-powered Discontinuous reception (DRX) scheme for energy saving. Towards this end, we leverage the derived ML models for dynamic DRX parameter adaptation to user traffic. The performance evaluation results demonstrate the superiority of LSTM over ARIMA in general, especially when the length of the training time series is high enough, and it is augmented by a wisely -selected set of features. Furthermore, the results show that adaptation of DRX parameters by online prediction of future traffic provides much more energy-saving at low latency cost in comparison with the legacy cell-wide DRX parameter adaptation.
- 11 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Green Communications and Networking
- Vol. 6 (2) , 1082-1095
Energy and Resource Efficiency by User Traffic Prediction and Classification in Cellular Networks
There is a lack of research on the analysis of per-user traffic in cellular networks, for deriving and following traffic-aware network management. In fact, the legacy design approach, in which resource provisioning and operation control are performed based on the cell-aggregated traffic scenarios, are not so energy- and cost-efficient and need to be substituted with user-centric predictive analysis of mobile network traffic and proactive network resource management. Here, we shed light on this problem by designing traffic prediction tools that utilize standard machine learning (ML) tools, including long short-term memory (LSTM) and autoregressive integrated moving average (ARIMA) on top of per-user data. We present an expansive empirical evaluation of the designed solutions over a real network traffic dataset. Within this analysis, the impact of different parameters, such as the time granularity, the length of future predictions, and feature selection are investigated. As a potential application of these solutions, we present an ML-powered Discontinuous reception (DRX) scheme for energy saving. Towards this end, we leverage the derived ML models for dynamic DRX parameter adaptation to user traffic. The performance evaluation results demonstrate the superiority of LSTM over ARIMA in general, especially when the length of the training time series is high enough, and it is augmented by a wisely -selected set of features. Furthermore, the results show that adaptation of DRX parameters by online prediction of future traffic provides much more energy-saving at low latency cost in comparison with the legacy cell-wide DRX parameter adaptation.
- Open Access
- 1 September 2021
- Published by Elsevier in Ad Hoc Networks
- Vol. 120
Interference management for coexisting Internet of Things networks over unlicensed spectrum
- 1 September 2021
- Published by Elsevier in Ad Hoc Networks
- Vol. 120
Open AccessInterference management for coexisting Internet of Things networks over unlicensed spectrum
- 25 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 10 (7) , 1405-1409
Low Power Wide Area IoT Networks: Reliability Analysis in Coexisting Scenarios
Low-power wide-area networks (LPWANs) are emerging technologies aiming at serving sporadic IoT traffic. While reliability of LPWANs in single-technology deployment has been well investigated, there is lack of research on performance evaluation in coexisting scenarios. To tackle this problem, we start by modeling statistics of aggregated interference from asynchronous sources over shared radio resources. Then, using stochastic geometry, we derive the closed-form statistics of reliability, mean success probability, and the mean local delay, defined as the mean time (in numbers of attempts) until a packet is successfully received by the nearest access point. We further investigate the interplay between traffic-load, access points density, and quality of communications in coexistence scenarios. Then, we derive the communications parameters regions, in terms of transmission power, access point density, and time activity factor, for which, the mean local delay is finite. The numerical and simulation results also corroborate the analysis.
- 25 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 10 (7) , 1405-1409
Low Power Wide Area IoT Networks: Reliability Analysis in Coexisting Scenarios
Low-power wide-area networks (LPWANs) are emerging technologies aiming at serving sporadic IoT traffic. While reliability of LPWANs in single-technology deployment has been well investigated, there is lack of research on performance evaluation in coexisting scenarios. To tackle this problem, we start by modeling statistics of aggregated interference from asynchronous sources over shared radio resources. Then, using stochastic geometry, we derive the closed-form statistics of reliability, mean success probability, and the mean local delay, defined as the mean time (in numbers of attempts) until a packet is successfully received by the nearest access point. We further investigate the interplay between traffic-load, access points density, and quality of communications in coexistence scenarios. Then, we derive the communications parameters regions, in terms of transmission power, access point density, and time activity factor, for which, the mean local delay is finite. The numerical and simulation results also corroborate the analysis.
- 12 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Green Communications and Networking
- Vol. 5 (2) , 908-920
Energy-Efficient and Reliable IoT Access Without Radio Resource Reservation
One of the major challenges for Internet-of-Things applications is that the existing cellular technologies do not support the uplink IoT traffic in an energy-efficient manner. There are two principal ways for serving the uplink IoT traffic: grant-based (i.e., scheduled) and grant-free (i.e., random access). Grant-based access provides fine-grained control of reliability and latency at the cost of energy consumption required for signaling. Grant-free access removes the signaling overhead at the cost of looser control of performance in terms of reliability and latency. However, a precise analysis of reliability, latency and energy performance of grant-free access (GFA) is largely missing. This article focuses on a GFA-type protocol, in which a device transmits several packet replicas, asynchronously with respect to the other devices. Using stochastic geometry, we derive closed-form expressions for reliability, delay, and energy consumption, which can be used to identify the tradeoffs among these performance parameters. In order to improve the performance of the protocol, we develop a receiver that leverages the random timing and frequency offsets among the devices in order to facilitate resolution of collisions. This is complemented by a per-device adaptive scheme that controls the number of transmitted replicas. The evaluation confirms the validity of the analysis and the potential of the proposed solution, identifying operating regions in which GFA outperforms the grant-based access.
- 12 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Green Communications and Networking
- Vol. 5 (2) , 908-920
Energy-Efficient and Reliable IoT Access Without Radio Resource Reservation
One of the major challenges for Internet-of-Things applications is that the existing cellular technologies do not support the uplink IoT traffic in an energy-efficient manner. There are two principal ways for serving the uplink IoT traffic: grant-based (i.e., scheduled) and grant-free (i.e., random access). Grant-based access provides fine-grained control of reliability and latency at the cost of energy consumption required for signaling. Grant-free access removes the signaling overhead at the cost of looser control of performance in terms of reliability and latency. However, a precise analysis of reliability, latency and energy performance of grant-free access (GFA) is largely missing. This article focuses on a GFA-type protocol, in which a device transmits several packet replicas, asynchronously with respect to the other devices. Using stochastic geometry, we derive closed-form expressions for reliability, delay, and energy consumption, which can be used to identify the tradeoffs among these performance parameters. In order to improve the performance of the protocol, we develop a receiver that leverages the random timing and frequency offsets among the devices in order to facilitate resolution of collisions. This is complemented by a per-device adaptive scheme that controls the number of transmitted replicas. The evaluation confirms the validity of the analysis and the potential of the proposed solution, identifying operating regions in which GFA outperforms the grant-based access.
- 22 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Green Communications and Networking
- Vol. 4 (1) , 57-68
On the Latency-Energy Performance of NB-IoT Systems in Providing Wide-Area IoT Connectivity
- 22 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Green Communications and Networking
- Vol. 4 (1) , 57-68
On the Latency-Energy Performance of NB-IoT Systems in Providing Wide-Area IoT Connectivity
- Open Access
Bitcoin Price Prediction: An ARIMA Approach
Bitcoin is considered the most valuable currency in the world. Besides being highly valuable, its value has also experienced a steep increase, from around 1 dollar in 2010 to around 18000 in 2017. Then, in recent years, it has attracted considerable attention in a diverse set of fields, including economics and computer science. The former mainly focuses on studying how it affects the market, determining reasons behinds its price fluctuations, and predicting its future prices. The latter mainly focuses on its vulnerabilities, scalability, and other techno-crypto-economic issues. Here, we aim at revealing the usefulness of traditional autoregressive integrative moving average (ARIMA) model in predicting the future value of bitcoin by analyzing the price time series in a 3-years-long time period. On the one hand, our empirical studies reveal that this simple scheme is efficient in sub-periods in which the behavior of the time-series is almost unchanged, especially when it is used for short-term prediction, e.g. 1-day. On the other hand, when we try to train the ARIMA model to a 3-years-long period, during which the bitcoin price has experienced different behaviors, or when we try to use it for a long-term prediction, we observe that it introduces large prediction errors. Especially, the ARIMA model is unable to capture the sharp fluctuations in the price, e.g. the volatility at the end of 2017. Then, it calls for more features to be extracted and used along with the price for a more accurate prediction of the price. We have further investigated the bitcoin price prediction using an ARIMA model, trained over a large dataset, and a limited test window of the bitcoin price, with length $w$, as inputs. Our study sheds lights on the interaction of the prediction accuracy, choice of ($p,q,d$), and window size $w$.Open AccessBitcoin Price Prediction: An ARIMA Approach
Bitcoin is considered the most valuable currency in the world. Besides being highly valuable, its value has also experienced a steep increase, from around 1 dollar in 2010 to around 18000 in 2017. Then, in recent years, it has attracted considerable attention in a diverse set of fields, including economics and computer science. The former mainly focuses on studying how it affects the market, determining reasons behinds its price fluctuations, and predicting its future prices. The latter mainly focuses on its vulnerabilities, scalability, and other techno-crypto-economic issues. Here, we aim at revealing the usefulness of traditional autoregressive integrative moving average (ARIMA) model in predicting the future value of bitcoin by analyzing the price time series in a 3-years-long time period. On the one hand, our empirical studies reveal that this simple scheme is efficient in sub-periods in which the behavior of the time-series is almost unchanged, especially when it is used for short-term prediction, e.g. 1-day. On the other hand, when we try to train the ARIMA model to a 3-years-long period, during which the bitcoin price has experienced different behaviors, or when we try to use it for a long-term prediction, we observe that it introduces large prediction errors. Especially, the ARIMA model is unable to capture the sharp fluctuations in the price, e.g. the volatility at the end of 2017. Then, it calls for more features to be extracted and used along with the price for a more accurate prediction of the price. We have further investigated the bitcoin price prediction using an ARIMA model, trained over a large dataset, and a limited test window of the bitcoin price, with length $w$, as inputs. Our study sheds lights on the interaction of the prediction accuracy, choice of ($p,q,d$), and window size $w$.