Marco Pecchia
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Marco Pecchia has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Alexander Vasiliev
Paul Scherrer Institute
5 shared publications - Hakim Ferroukhi
Paul Scherrer Institut, Forschungsstrasse 111, 5232 Villigen, Switzerland
5 shared publications - Dimitri Rochman
Paul Scherrer Institute (PSI)
4 shared publications - A. Bernal
Laboratory for Reactor Physics and Thermal-Hydraulics, Paul Scherrer Institut. Forschungsstrasse 111, 5232 Villigen PSI, Switzerland
1 shared publication - Guido Ledergerber
Kernkraftwerk Leibstadt AG, CH 5325 Leibstadt, Switzerland
1 shared publication - José J. Herrero
Paul Scherrer Institute (PSI), 5232 Villigen PSI, Switzerland
1 shared publication
Latest Publications
- Open Access
- 22 February 2021
- Published by EDP Sciences in EPJ Web of Conferences
- Vol. 247, 10021
ENHANCEMENT OF VALIDATION STUDIES FOR REACTOR DOSIMETRY AND ACTIVATION PREDICTIONS WITH THE NUCLEAR DATA SAMPLING METHODOLOGY
The CASMO/SIMULATE/MCNP/FISPACT-II calculation route has been established at the Paul Scherrer Institute (PSI) for reactor dosimetry and activation studies. Furthermore, the in-house tool NUSS is in use at PSI for nuclear data (ND) related uncertainties quantifications with Monte Carlo neutron transport calculations. The use of randomly sampled ACE-formatted ND files not only allows propagation of the ND uncertainties, but also can serve for assessing the applicability of different types of experimental data for validation of calculation predictions of parameters of interest. In the present work an application of the PSI calculation scheme for analysis of activation reaction rates and the fast neutron fluence (FNF), throughout the Swiss pressurised water reactor (PWR) and simplified containment building models, is demonstrated. As particular examples of potentially available experimental data, two kinds of the neutron flux monitors are considered: a) the reactor pressure vessel scraping samples and detectors placed in the dosimetry channels, mounted at the core barrel and designed for validation of FNF calculations, and b) the ex-vessel dosimeters, specifically used by the Swiss waste management organisation (NAGRA) for validation of bio-shield activation predictions. The calculations were done with the ENDF/B-VII.1 library. The obtained results demonstrate importance of the ND uncertainties for the dosimetry evaluations. The assessment of the applicability of the selected experimental information for validation of the bio-shield irradiation calculations was done based on evaluation of the ND-related Pearson correlation coefficients.
- 22 February 2021
- Published by EDP Sciences in EPJ Web of Conferences
- Vol. 247, 10021
Open AccessENHANCEMENT OF VALIDATION STUDIES FOR REACTOR DOSIMETRY AND ACTIVATION PREDICTIONS WITH THE NUCLEAR DATA SAMPLING METHODOLOGY
The CASMO/SIMULATE/MCNP/FISPACT-II calculation route has been established at the Paul Scherrer Institute (PSI) for reactor dosimetry and activation studies. Furthermore, the in-house tool NUSS is in use at PSI for nuclear data (ND) related uncertainties quantifications with Monte Carlo neutron transport calculations. The use of randomly sampled ACE-formatted ND files not only allows propagation of the ND uncertainties, but also can serve for assessing the applicability of different types of experimental data for validation of calculation predictions of parameters of interest. In the present work an application of the PSI calculation scheme for analysis of activation reaction rates and the fast neutron fluence (FNF), throughout the Swiss pressurised water reactor (PWR) and simplified containment building models, is demonstrated. As particular examples of potentially available experimental data, two kinds of the neutron flux monitors are considered: a) the reactor pressure vessel scraping samples and detectors placed in the dosimetry channels, mounted at the core barrel and designed for validation of FNF calculations, and b) the ex-vessel dosimeters, specifically used by the Swiss waste management organisation (NAGRA) for validation of bio-shield activation predictions. The calculations were done with the ENDF/B-VII.1 library. The obtained results demonstrate importance of the ND uncertainties for the dosimetry evaluations. The assessment of the applicability of the selected experimental information for validation of the bio-shield irradiation calculations was done based on evaluation of the ND-related Pearson correlation coefficients.
- Open Access
- 22 February 2021
- Published by EDP Sciences in EPJ Web of Conferences
- Vol. 247, 06011
METHODOLOGY FOR HIGH-FIDELITY DETERMINISTIC MODELLING OF SWISS LWR FUEL ASSEMBLIES
The main goal of this work is to perform pin-by-pin calculations of Swiss LWR fuel assemblies with neutron transport deterministic methods. At Paul Scherrer Institut (PSI), LWR calculations are performed with the core management system CMSYS, which is based on the Studsvik suite of codes. CMSYS includes models for all the Swiss reactors validated against a database of experimental information. Moreover, PSI has improved the pin power calculations by developing models of Swiss fuel assemblies for the Monte Carlo code MCNP, with the isotopic compositions obtained from the In-Core Fuel Management data of the Studsvik suite of codes, by using the SNF code. A step forward is to use a neutron code based on fast deterministic neutron transport methods. The method used in this work is based on a planar Method of Characteristics in which the axial coupling is solved by 1D SP3 method. The neutron code used is nTRACER. Thus, the methodology of this work develops nTRACER models of Swiss PWR fuel assemblies, in which the fuel of each pin and axial level is modelled with the isotopic composition obtained from SNF. This methodology was applied to 2D and 3D calculations of a Swiss PWR fuel assembly. However, this method has two main limitations. First, the cross sections libraries of nTRACER lack some of the isotopes obtained by SNF. Fortunately, this work proves that the missing isotopes do not have a strong effect on keff and the power distribution. Second, the 3D models require high computational memory resources, that is, more than 260 Gb. Thus, the nTRACER code was modified, so now it uses only 8 Gb, without any loss of accuracy. Finally, the keff and power results are compared with Monte Carlo calculations obtained by Serpent.
- 22 February 2021
- Published by EDP Sciences in EPJ Web of Conferences
- Vol. 247, 06011
Open AccessMETHODOLOGY FOR HIGH-FIDELITY DETERMINISTIC MODELLING OF SWISS LWR FUEL ASSEMBLIES
The main goal of this work is to perform pin-by-pin calculations of Swiss LWR fuel assemblies with neutron transport deterministic methods. At Paul Scherrer Institut (PSI), LWR calculations are performed with the core management system CMSYS, which is based on the Studsvik suite of codes. CMSYS includes models for all the Swiss reactors validated against a database of experimental information. Moreover, PSI has improved the pin power calculations by developing models of Swiss fuel assemblies for the Monte Carlo code MCNP, with the isotopic compositions obtained from the In-Core Fuel Management data of the Studsvik suite of codes, by using the SNF code. A step forward is to use a neutron code based on fast deterministic neutron transport methods. The method used in this work is based on a planar Method of Characteristics in which the axial coupling is solved by 1D SP3 method. The neutron code used is nTRACER. Thus, the methodology of this work develops nTRACER models of Swiss PWR fuel assemblies, in which the fuel of each pin and axial level is modelled with the isotopic composition obtained from SNF. This methodology was applied to 2D and 3D calculations of a Swiss PWR fuel assembly. However, this method has two main limitations. First, the cross sections libraries of nTRACER lack some of the isotopes obtained by SNF. Fortunately, this work proves that the missing isotopes do not have a strong effect on keff and the power distribution. Second, the 3D models require high computational memory resources, that is, more than 260 Gb. Thus, the nTRACER code was modified, so now it uses only 8 Gb, without any loss of accuracy. Finally, the keff and power results are compared with Monte Carlo calculations obtained by Serpent.
- 1 September 2020
- Published by Elsevier in Annals of Nuclear Energy
- Vol. 144, 107489
A comprehensive theoretical assessment of potential 'tramp uranium' isotopic evolution in BWR reactors
- 1 September 2020
- Published by Elsevier in Annals of Nuclear Energy
- Vol. 144, 107489
A comprehensive theoretical assessment of potential 'tramp uranium' isotopic evolution in BWR reactors
- Open Access
Preliminary Assessment of Criticality Safety Constraints for Swiss Spent Nuclear Fuel Loading in Disposal Canisters
This paper presents preliminary criticality safety assessments performed by the Paul Scherrer Institute (PSI) in cooperation with the Swiss National Cooperative for the Disposal of Radioactive Waste (Nagra) for spent nuclear fuel disposal canisters loaded with Swiss Pressurized Water Reactor (PWR) UO2 spent fuel assemblies. The burnup credit application is examined with respect to both existing concepts: taking into account actinides only and taking into account actinides plus fission products. The criticality safety calculations are integrated with uncertainty quantifications that are as detailed as possible, accounting for the uncertainties in the nuclear data used, fuel assembly and disposal canister design parameters and operating conditions, as well as the radiation-induced changes in the fuel assembly geometry. Furthermore, the most penalising axial and radial burnup profiles and the most reactive fuel loading configuration for the canisters were taken into account accordingly. The results of the study are presented with the help of loading curves showing what minimum average fuel assembly burnup is required for the given initial fuel enrichment of fresh fuel assemblies to ensure that the effective neutron multiplication factor, , of the canister would comply with the imposed criticality safety criterion.Open AccessPreliminary Assessment of Criticality Safety Constraints for Swiss Spent Nuclear Fuel Loading in Disposal Canisters
This paper presents preliminary criticality safety assessments performed by the Paul Scherrer Institute (PSI) in cooperation with the Swiss National Cooperative for the Disposal of Radioactive Waste (Nagra) for spent nuclear fuel disposal canisters loaded with Swiss Pressurized Water Reactor (PWR) UO2 spent fuel assemblies. The burnup credit application is examined with respect to both existing concepts: taking into account actinides only and taking into account actinides plus fission products. The criticality safety calculations are integrated with uncertainty quantifications that are as detailed as possible, accounting for the uncertainties in the nuclear data used, fuel assembly and disposal canister design parameters and operating conditions, as well as the radiation-induced changes in the fuel assembly geometry. Furthermore, the most penalising axial and radial burnup profiles and the most reactive fuel loading configuration for the canisters were taken into account accordingly. The results of the study are presented with the help of loading curves showing what minimum average fuel assembly burnup is required for the given initial fuel enrichment of fresh fuel assemblies to ensure that the effective neutron multiplication factor, , of the canister would comply with the imposed criticality safety criterion. - Open Access
Exploring Stochastic Sampling in Nuclear Data Uncertainties Assessment for Reactor Physics Applications and Validation Studies
The quantification of uncertainties of various calculation results, caused by the uncertainties associated with the input nuclear data, is a common task in nuclear reactor physics applications. Modern computation resources and improved knowledge on nuclear data allow nowadays to significantly advance the capabilities for practical investigations. Stochastic sampling is the method which has received recently a high momentum for its use and exploration in the domain of reactor design and safety analysis. An application of a stochastic sampling based tool towards nuclear reactor dosimetry studies is considered in the given paper with certain exemplary test evaluations. The stochastic sampling not only allows the input nuclear data uncertainties propagation through the calculations, but also an associated correlation analysis performance with no additional computation costs and for any parameters of interest can be done. Thus, an example of assessment of the Pearson correlation coefficients for several models, used in practical validation studies, is shown here. As a next step, the analysis of the obtained information is proposed for discussion, with focus on the systems similarities assessment. The benefits of the employed method and tools with respect to practical reactor dosimetry studies are consequently outlined.
Open AccessExploring Stochastic Sampling in Nuclear Data Uncertainties Assessment for Reactor Physics Applications and Validation Studies
The quantification of uncertainties of various calculation results, caused by the uncertainties associated with the input nuclear data, is a common task in nuclear reactor physics applications. Modern computation resources and improved knowledge on nuclear data allow nowadays to significantly advance the capabilities for practical investigations. Stochastic sampling is the method which has received recently a high momentum for its use and exploration in the domain of reactor design and safety analysis. An application of a stochastic sampling based tool towards nuclear reactor dosimetry studies is considered in the given paper with certain exemplary test evaluations. The stochastic sampling not only allows the input nuclear data uncertainties propagation through the calculations, but also an associated correlation analysis performance with no additional computation costs and for any parameters of interest can be done. Thus, an example of assessment of the Pearson correlation coefficients for several models, used in practical validation studies, is shown here. As a next step, the analysis of the obtained information is proposed for discussion, with focus on the systems similarities assessment. The benefits of the employed method and tools with respect to practical reactor dosimetry studies are consequently outlined.