Maitane Garmendia
Maitane Garmendia has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Eñaut Muxika
Electronics and Computing Department, Mondragon University, Arrasate, Spain
2 shared publications - Xabier Arraztoa Lazkanotegi
Ikerlan Technology Research Center, Basque Research and Technology Alliance (BRTA), Arrasate/Mondragn, Spain
2 shared publications - Andrea Marongiu1 shared publication
David Marcos
1 shared publication- David Marcos
Ikerlan Technology Research Center, Basque Research and Technology Alliance (BRTA), Arrasate/Mondragn, Spain
1 shared publication - David Marcos
Energy Storage and Management, Ikerlan Technology Research Centre, Basque Research and Technology Alliance (BRTA), 20500 Arrasate-Mondragon, Spain
1 shared publication
Latest Publications
- Open Access
- 28 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 59811-59825
Scalable Mixed-Criticality Safety Concepts for a Stationary Battery Management System (BMS) With Integrated Machine Learning (ML)
Battery management systems (BMSs) play a crucial role in controlling and supervising the safe operation of lithium-ion batteries in stationary energy storage systems. The integration of mixed-criticality functions (combining safety functions of different criticality and non-safety-related functions) into these electronic embedded systems offers significant potential benefits but also introduces technical and certification challenges. Additionally, modern BMSs are increasingly integrating battery models based on machine learning (ML). Ultimately, a relevant challenge is to make a BMS flexible to efficiently adapt and integrate non-safety-related functions that require intensive computing resources without compromising safety requirements. This publication summarizes the example-based design and analysis of scalable computing architectures for the development of a mixed-criticality BMS that integrates ML battery models in stationary applications. The safety concept focuses on the computing architecture, where mixed-criticality functions and ML models are integrated, and on analyzing the advantages and disadvantages of the proposed approaches. The computing architectures discussed range from widely used lockstep and singlecore processor solutions to high-performance computing platforms such as multicore devices.
- 28 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 59811-59825
Open AccessScalable Mixed-Criticality Safety Concepts for a Stationary Battery Management System (BMS) With Integrated Machine Learning (ML)
Battery management systems (BMSs) play a crucial role in controlling and supervising the safe operation of lithium-ion batteries in stationary energy storage systems. The integration of mixed-criticality functions (combining safety functions of different criticality and non-safety-related functions) into these electronic embedded systems offers significant potential benefits but also introduces technical and certification challenges. Additionally, modern BMSs are increasingly integrating battery models based on machine learning (ML). Ultimately, a relevant challenge is to make a BMS flexible to efficiently adapt and integrate non-safety-related functions that require intensive computing resources without compromising safety requirements. This publication summarizes the example-based design and analysis of scalable computing architectures for the development of a mixed-criticality BMS that integrates ML battery models in stationary applications. The safety concept focuses on the computing architecture, where mixed-criticality functions and ML models are integrated, and on analyzing the advantages and disadvantages of the proposed approaches. The computing architectures discussed range from widely used lockstep and singlecore processor solutions to high-performance computing platforms such as multicore devices.
- 10 May 2023
- Published by Udako Euskal Unibertsitatea
Litio-ioizko bateriak kudeatzeko sistemen segurtasun funtzionala
Litio-ioizko bateriak kudeatzeko sistemen segurtasun funtzionala produkzioaren informazio-fitxa
- 10 May 2023
- Published by Udako Euskal Unibertsitatea
Litio-ioizko bateriak kudeatzeko sistemen segurtasun funtzionala
Litio-ioizko bateriak kudeatzeko sistemen segurtasun funtzionala produkzioaren informazio-fitxa
- Open Access
Functional Safety BMS Design Methodology for Automotive Lithium-Based Batteries
The increasing use of lithium batteries and the necessary integration of battery management systems (BMS) has led international standards to demand functional safety in electromobility applications, with a special focus on electric vehicles. This work covers the complete design of an enhanced automotive BMS with functional safety from the concept phase to verification activities. Firstly, a detailed analysis of the intrinsic hazards of lithium-based batteries is performed. Secondly, a hazard and risk assessment of an automotive lithium-based battery is carried out to address the specific risks deriving from the automotive application and the safety goals to be fulfilled to keep it under control. Safety goals lead to the technical safety requirements for the next hardware design and prototyping of a BMS Slave. Finally, the failure rate of the BMS Slave is assessed to verify the compliance of the developed enhanced BMS Slave with the functional safety Automotive Safety Integrity Level (ASIL) C. This paper contributes the design methodology of a BMS complying with ISO 26262 functional safety standard requirements for automotive lithium-based batteries.
Open AccessFunctional Safety BMS Design Methodology for Automotive Lithium-Based Batteries
The increasing use of lithium batteries and the necessary integration of battery management systems (BMS) has led international standards to demand functional safety in electromobility applications, with a special focus on electric vehicles. This work covers the complete design of an enhanced automotive BMS with functional safety from the concept phase to verification activities. Firstly, a detailed analysis of the intrinsic hazards of lithium-based batteries is performed. Secondly, a hazard and risk assessment of an automotive lithium-based battery is carried out to address the specific risks deriving from the automotive application and the safety goals to be fulfilled to keep it under control. Safety goals lead to the technical safety requirements for the next hardware design and prototyping of a BMS Slave. Finally, the failure rate of the BMS Slave is assessed to verify the compliance of the developed enhanced BMS Slave with the functional safety Automotive Safety Integrity Level (ASIL) C. This paper contributes the design methodology of a BMS complying with ISO 26262 functional safety standard requirements for automotive lithium-based batteries.
- Open Access
- 27 September 2013
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 6 (3) , 771-781
Proposal and Validation of a SOC Estimation Algorithm of LiFePO4 Battery Packs for Traction Applications
An accurate onboard State-of-Charge (SOC) estimation is one of the key functions a Battery Management System (BMS) has to perform in order to provide the optimal performance management of the battery system under control. In this framework, this paper presents a proposal of an Enhanced Coulomb Counting (CC) State-of-Charge estimation algorithm based on Constant Voltage Charge Detection (CVCD) and Open Circuit Voltage (OCV) model for LiFePO4 batteries. Designed for onboard BMS implementation, it is characterized by its simplicity and operability in wide operating conditions (under diverse load profiles, temperatures, SOC ranges, etc.). The description of the algorithm at both, cell and battery-module level is detailed in the paper. Furthermore, its on-line experimental validation and scope determination is tested under three different traction applications and cell specimens in an own-developed real time validation platform: 2.5 Ah cells (Type A) in a residential elevator application, 8 Ah cells (Type B) in a pure electric on-road vehicle application and 100 Ah cells (Type C) in an electric railway vehicle application. According to the achieved results, the accuracy and versatility of the algorithm for different operating scenarios is certainly proven. In the worst case scenario the algorithm is capable of keeping the SOC estimation of the system under test stabilized around 5% of error.
- 27 September 2013
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 6 (3) , 771-781
Open AccessProposal and Validation of a SOC Estimation Algorithm of LiFePO4 Battery Packs for Traction Applications
An accurate onboard State-of-Charge (SOC) estimation is one of the key functions a Battery Management System (BMS) has to perform in order to provide the optimal performance management of the battery system under control. In this framework, this paper presents a proposal of an Enhanced Coulomb Counting (CC) State-of-Charge estimation algorithm based on Constant Voltage Charge Detection (CVCD) and Open Circuit Voltage (OCV) model for LiFePO4 batteries. Designed for onboard BMS implementation, it is characterized by its simplicity and operability in wide operating conditions (under diverse load profiles, temperatures, SOC ranges, etc.). The description of the algorithm at both, cell and battery-module level is detailed in the paper. Furthermore, its on-line experimental validation and scope determination is tested under three different traction applications and cell specimens in an own-developed real time validation platform: 2.5 Ah cells (Type A) in a residential elevator application, 8 Ah cells (Type B) in a pure electric on-road vehicle application and 100 Ah cells (Type C) in an electric railway vehicle application. According to the achieved results, the accuracy and versatility of the algorithm for different operating scenarios is certainly proven. In the worst case scenario the algorithm is capable of keeping the SOC estimation of the system under test stabilized around 5% of error.