Kai He
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kai He has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Chuan Li
State Key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China, Chengdu 610054, China
1 shared publication - Dong Xu
School of Materials Science and Engineering, Anhui Polytechnic University, Wuhu, People’s Republic of China
1 shared publication - Wenbo Luo
State Key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China, Chengdu, China
1 shared publication - Xingzhao Liu
State Key Laboratory of Electronic Thin Films and Integrated Devices, School of Integrated Circuit Science and Engineering, University of Electronic Science and Technology of China, Chengdu, China
1 shared publication
Latest Publications
- Open Access
- 11 April 2016
- Published by MDPI AG in Nanomaterials
- Vol. 6 (4) , 67
PMN-PT/PVDF Nanocomposite for High Output Nanogenerator Applications
The 0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3(0.7PMN-0.3PT) nanorods were obtained via hydrothermal method with high yield (over 78%). Then, new piezoelectric nanocomposites based on (1−x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 (PMN-PT) nanorods were fabricated by dispersing the 0.7PMN-0.3PT nanorods into piezoelectric poly(vinylidene fluoride) (PVDF) polymer. The mechanical behaviors of the nanocomposites were investigated. The voltage and current generation of PMN-PT/PVDF nanocomposites were also measured. The results showed that the tensile strength, yield strength, and Young’s modulus of nanocomposites were enhanced as compared to that of the pure PVDF. The largest Young’s modulus of 1.71 GPa was found in the samples with 20 wt % nanorod content. The maximum output voltage of 10.3 V and output current of 46 nA were obtained in the samples with 20 wt % nanorod content, which was able to provide a 13-fold larger output voltage and a 4.5-fold larger output current than that of pure PVDF piezoelectric polymer. The current density of PMN-PT/PVDF nanocomposites is 20 nA/cm2. The PMN-PT/PVDF nanocomposites exhibited great potential for flexible self-powered sensing applications.
- 11 April 2016
- Published by MDPI AG in Nanomaterials
- Vol. 6 (4) , 67
Open AccessPMN-PT/PVDF Nanocomposite for High Output Nanogenerator Applications
The 0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3(0.7PMN-0.3PT) nanorods were obtained via hydrothermal method with high yield (over 78%). Then, new piezoelectric nanocomposites based on (1−x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 (PMN-PT) nanorods were fabricated by dispersing the 0.7PMN-0.3PT nanorods into piezoelectric poly(vinylidene fluoride) (PVDF) polymer. The mechanical behaviors of the nanocomposites were investigated. The voltage and current generation of PMN-PT/PVDF nanocomposites were also measured. The results showed that the tensile strength, yield strength, and Young’s modulus of nanocomposites were enhanced as compared to that of the pure PVDF. The largest Young’s modulus of 1.71 GPa was found in the samples with 20 wt % nanorod content. The maximum output voltage of 10.3 V and output current of 46 nA were obtained in the samples with 20 wt % nanorod content, which was able to provide a 13-fold larger output voltage and a 4.5-fold larger output current than that of pure PVDF piezoelectric polymer. The current density of PMN-PT/PVDF nanocomposites is 20 nA/cm2. The PMN-PT/PVDF nanocomposites exhibited great potential for flexible self-powered sensing applications.