PDPalakaluri Srividya Devi

Palakaluri Srividya Devi

*This is an algorithmically generated author record based on publicly available information.

Palakaluri Srividya Devi has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Integration of Solar Energy and Embedded Control for Autonomous Grass Cutting Robots

    by P Srividya Devi, Rekha M, V Vijaya Ramaraju

    This paper presents the design and development of a solar-powered autonomous grass cutting robot with obstacle detection and avoidance capabilities. The system utilizes solar energy as its primary power source, reducing reliance on conventional charging and minimizing environmental impact. At its core, the Arduino Uno development board, based on the Atmega328p microcontroller, performs all control and computational tasks. An ultrasonic sensor enables real-time obstacle detection, allowing the robot to adjust its path dynamically and avoid collisions. The motor driver circuit translates microcontroller signals into precise wheel movements, ensuring smooth navigation and efficient area coverage. Control algorithms are programmed in a simplified C++ environment using the Arduino IDE. The integration of solar energy, embedded control, and intelligent navigation provides an eco-friendly, cost-effective, and sustainable solution for automated lawn care. Experimental results validate effective performance under varying conditions, demonstrating strong potential for residential and institutional applications.

  • Open Access

    Darcy-Forchheimer Flow of Oldroyd-B Nanofluid Over an Inclined Plate with Exothermic Chemical Reactions and Bayesian Neural Network Modelling

    by Gadamsetty Revathi, M. Rekha, P. Srividya Devi, B.CH. Nookaraju

    This study investigates the steady, laminar motion of a non-Newtonian Oldroyd-B nanofluid over an inclined plate, integrating Buongiorno’s nanofluid model to account for Brownian motion and thermophoresis. The novel integration of couple stress and Forchheimer inertia in the analysis, coupled with advanced Bayesian-regularized ANN modelling, distinguishes this work. Governing equations are transformed using similarity variables and solved numerically via MATLAB’s bvp4c solver. The effects of couple stress, relaxation time, Forchheimer number, thermal radiation, thermophoresis, Brownian motion, and activation energy on velocity, temperature, and concentration profiles are systematically analyzed. Results reveal that couple stress and relaxation time reduce velocity, while thermal radiation and thermophoresis elevate temperature. Brownian motion decreases concentration, and activation energy influences both temperature and concentration oppositely. Multiple linear regression models quantify relationships between friction factor, Nusselt, and Sherwood numbers and key parameters, while a Bayesian-regularized artificial neural network (ANN) demonstrates high predictive accuracy (R-values ~1). It is noticed that increasing the couple stress parameter from 0.1 to 2.5 reduces friction factor by 59.8%, increasing the thermophoresis parameter from 0.1 to 2.5 decreases the Nusselt number by 7.8%, reflecting reduced heat transfer, and increasing the Brownian motion parameter from 0.1 to 2.5 reduces the mass transmission rate by 2.6%.

  • Open Access

    Experimental and numerical validation of the energy-saving performance of a passive pcm floor for a real-scale building

    by N. Kalyana Sundaram, R. Maruthamuthu, Zaid Alsalami, Mahdi Abdulkhudur Alkhafaij, P. Srividya Devi, R. Senthil Kumar

    A greater knowledge of the intrinsic unpredictability of the Earth’s climate system and its expected response to natural and human factors is being provided by scientific advances and improved climate change observation. The way that the Earth system reacts to changes in radiative forcings will determine how climate change affects the environment and civilization. It will also rely on how humanity adapts via changes in economics, technology, policy, and lifestyle. Future scenarios must be used to examine the possible outcomes of various response options since there are a lot of uncertainty regarding the forces and reactions to climate change in the future. According to this study, phase change material (PCM) has the ability to hold heat at a steady temperature, which helps to lower the energy usage of buildings. This is a PCM board that has been made to store heat in order to lower the power required for temperature regulation, the PCM boards were used as the floor in the real-scale office. This resulted in lower energy usage by eighteen and twenty percentages in the winter. To assess long-term performance, experimental data verify a numerical model. The findings of the simulation and experiment show that a high-performance PCM floor may effectively reduce the amount of electricity used for heating and cooling.


  • Open Access

    Energy Storage System Modelling For Hybrid Electric Vehicle

    by G. Mohammed, P. Srividya Devi, G. Durgadevi, R. Subramani, Saif O. Husain

    The equivalent circuit model (ECM)-based traditional state-of-charge (SoC) estimate approaches combine all state variables into a single enhanced state vector. However, the stability and accuracy of the estimates are compromised by the correlations between RC voltages and SOC. In this article, the four battery chemistries have been discussed for their state variable characterization i.e. state of charge (SOC). The battery types considered are lead acid, nickel metal hydride, lithium ion. The manufacturer’s battery discharge curves are used to determine the model parameters, and a method is also described for doing this. An improved battery model is suggested in this study that can be applied to HEV design and analysis. By incorporating the electrical characteristics of the battery, the model generates precise results.


  • Effect of different Communication Delay Latencies on LMI based Load Frequency Control Model

    by Mounica Nutakki, Sri Vidya Devi Palakaluri, Dr.R.Vijaya Santhi

    This paper present’s the study of Load Frequency Control (LFC) with certain nonlinear parameters at different communication delay latencies. The main aim is to maintain the stability of power system in all the adverse conditions including time delays in the network. Here, the stability of the system is demonstrated using Lyapuonav stability theorem in the presence of Delay’s and Linear Matrix Inequalities (LMI). Time delays are taken in the network. These delay latencies are linearized using the rational approximation method. Here Padé approximation is used with different time delay values. The problem is formulated using a decentralized LFC approach for a power system containing a single area. Simulation results carried out with different delay latency values integrated with the Load frequency control LMI and rigorous analysis is performed to test the robustness of the proposed strategy.


  • Energy Monitoring and Routing for Impending Challenges in SMART GRID

    by Griet Assistant Professor, V V S Madhuri, P.SRividya Devi

    This paper emphasis on the scenario of current Power system for the upcoming world i.e. in Power Grid (PG) now a day’s Smart technologies playing vital role, Thus the term Smart Grid (SG). The interconnections of the Power Grid(PG) is mingled and complex. The two- way flow of power is caused by the presence of various distributed generation. Therefore, in future it is becoming more composite and a vast constriction to the energy routing, where monitoring of each signal plays a significant role. So, each signal quality must be improved, sensors should be placed and aided to power system. Then Introducing Internet of Things(IoT) to the Power Grid(PG), with respect to the VAN, HAN, WAN each signal is monitored. This paper presents the issues and remedies in design and monitoring of Smart Grid linked with IoT.


  • Open Access

    Introducing LQR-fuzzy for a dynamic multi area LFC-DR model

    by Palakaluri Srividya Devi, R.VIjaya Santhi

    It is well known that Load Frequency Control (LFC) model plays a vital role in electric power system design and operation. In the literature, much research works has stated on the advantages and realization of DR (Demand Response), which has proved to be an important part of the future smart grid. In an interconnected power system, if a load demand changes randomly, both frequency and tie line power varies. LFC-DR model is tuned by standard controllers like PI, PD, PID controllers, as they have constant gains. Hence, they are incapable of acquiring desirable dynamic performance for an extensive variety of operating conditions and various load changes. This paper presents the idea of introducing a DR control loop in the traditional Multi area LFC model (called LFC -DR) using LQR- Fuzzy Logic Control. The effect of DR-CDL i.e. (Demand Response Communication Delay Latency) in the design is also considered and is linearized using Padé approximation. Simulation results shows that the addition of DR control loop with proposed controller guarantees stability of the overall closed-loop LFC-DR system which effectively improves the system dynamic performance and is superior over a classical controller at different operating scenarios.