Dariusz Kurpisz

The use of bonded joints, which is common across many industrial sectors, is closely tied to rapid advances in design and manufacturing technologies. Modern adhesives enable their application under a wide range of operating conditions and allow high precision due to advanced...

Damping and energy-consuming elements can be found in many technical applications. This means these component types can prevent fractures or injuries in the case of products or people, respectively. In the last time, many modern applications and inventions associated with the reduction of the effects of an impact are observed especially in the mode of transportation safety area. The significant development of the automotive industry, increasing popularity of motorbikes, electric bikes and scooters, sports field, etc., require new solutions for personal safety protection. Human head and neck protection, and other body parts protection are typical groups of solutions from biomechanics and mechanical engineering. Authors have investigated LDPE-made pneumatic absorbers under axial impact force. Based on the experimental approach and analytical model, mechanical characteristics are presented. Impact force value, deceleration and damping for different loading conditions are shown. Because safety systems’ impact protective features can be matched to impact conditions, results indicated that absorber damping could possibly be a good solution for them, shaping the impact characteristics according to safety requirements.

Sustainable development means taking care of the environment, which also means promoting green transport, which involves the systematic development of personal transport in its broadest sense. The positive aspects associated with cheap and convenient electric transport are intertwined with the problem of collisions and accidents. While developing road infrastructure for electric vehicles such as scooters, bicycles, and others, research should be conducted in parallel to ensure the highest possible level of safety for users. There is also an increase in the number of people using bicycles and electric scooters, which develop significant speeds. The problem of accidents among users of classic and electric bicycles and scooters is evident, and post-accident injuries pose a serious challenge to medical practitioners. The literature is rich in statistical analyses of accidents among users of scooters and bicycles, but there are no studies where the behaviour of users of bicycles, scooters, etc. is analysed. The authors of this study set out to develop a measurement system to assess the traffic safety of people using bicycles and scooters. The device uses LIDAR to record the speed of the vehicle and a camera, the images of which are processed by an algorithm in order to classify the user as being on a bicycle or scooter and using or not using head protection with a helmet. It is also possible to analyse the behaviour of the vehicle users under study. The article describes the built measurement device and presents the results of the initial measurements made by the device.

(1) Background: Ensuring road user safety relies on the optimal technical condition of cars, addressing both active and passive safety measures. In Poland, vehicle regulations, articulated in the Minister of Infrastructure’s decree of 31 December 2002, establish technical prerequisites and necessary equipment. For this purpose, the main question was: What is the current technical condition of cars on the road in Western Poland? (2) Methods: A total of 1067 vehicles were tested, reflecting a maximum error of 3% in a population of 20 million cars. Tests were conducted at the diagnostic station from 1 October 2022 to 30 September 2023. Statistical analysis was conducted using STATISTICA software. (3) Results: Periodic technical tests yield insights into passenger car safety standards in western Poland. The application of formulated characteristics allows a comprehensive evaluation, providing valuable information on the overall safety condition of inspected vehicles. The vehicles in Poland have an average age exceeding 14 years, and their average mileage is 168,000 km. (4) Conclusions: The examination uncovered various technical defects and provided statistical interpretations, unequivocally demonstrating that these identified issues have the potential to impact traffic safety. Such studies act as a reference point for other researchers addressing the broader issue of road traffic.

Road safety problem is still topical, especially since the number of vehicles and the volume of traffic are increasing. It is possible to increase the safety of road users through systemic changes in many areas related to transport. The deformation of the vehicle body during an accident has an impact on the loads acting on the passengers. Vehicle body deformation depends on complex parameters, and knowledge of these parameters is essential for designing crumple zones and the accident reconstruction process. Knowledge of the mechanical parameters of the vehicle structure during deformation is also a reference to passenger injury indicators assessment. This paper reports results from the analytical approach for determining the protection level of personal vehicles. The proposed conception is based on the results from the static stiffness characteristic of the Ford Taurus, which gives the possibility of phenomenological and simple body crumple analytical description at a speed equal to 10 km/h, 40 km/h, 56 km/h and 60 km/h, which is an original part of the work. The approach enables us to describe the vehicle crash by focusing on variations of deformation in time, stiffness, vehicle collision time (duration), deceleration and dynamic crash force. Basing on the body stiffness data of the personal vehicle, the length of the deformation zone in the front of the car and the maximum values of force at the crash for a speed of 60 km/h are presented. Results obtained by the authors show that is possible to estimate the overloading level during the crash time of a vehicle based on the stiffness characteristic of the car body. The proposed methodology can be developed and the advantage of the presented procedure is an uncomplicated useful tool for solving complex problems of a vehicle crash.

An energy-based method in phenomenological description of mechanical properties of nonlinear materials under plane stress