Aurelio Jose Gonzalez
Research Subjects
Aurelio Jose Gonzalez has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Alfonso Vidal
Energy Department, CIEMAT-PSA, Avda. Complutense 40, 28040 Madrid, Spain
2 shared publications - Alexandra Zygogianni1 shared publication
- Alfredo Iranzo
Energy Engineering Department, School of Engineering, Universidad de Sevilla, 41092 Sevilla, Spain
1 shared publication Athanasios G. Konstandopoulos
1 shared publicationChrysoula Pagkoura
1 shared publication- Elvira Tapia
Thermal Engineering Group, Energy Engineering Department, School of Engineering, University of Seville, Camino de los Descubrimientos s/n, 41092 Sevilla, Spain
1 shared publication
Latest Publications
- Open Access
Multi-Tubular Reactor for Hydrogen Production: CFD Thermal Design and Experimental Testing
This study presents the Computational Fluid Dynamics (CFD) thermal design and experimental tests results for a multi-tubular solar reactor for hydrogen production based on the ferrite thermochemical cycle in a pilot plant in the Plataforma Solar de Almería (PSA). The methodology followed for the solar reactor design is described, as well as the experimental tests carried out during the testing campaign and characterization of the reactor. The CFD model developed for the thermal design of the solar reactor has been validated against the experimental measurements, with a temperature error ranging from 1% to around 10% depending on the location within the reactor. The thermal balance in the reactor (cavity and tubes) has been also solved by the CFD model, showing a 7.9% thermal efficiency of the reactor. CFD results also show the percentage of reacting media inside the tubes which achieve the required temperature for the endothermic reaction process, with 90% of the ferrite pellets inside the tubes above the required temperature of 900 °C. The multi-tubular solar reactor designed with aid of CFD modelling and simulations has been built and operated successfully.
Open AccessMulti-Tubular Reactor for Hydrogen Production: CFD Thermal Design and Experimental Testing
This study presents the Computational Fluid Dynamics (CFD) thermal design and experimental tests results for a multi-tubular solar reactor for hydrogen production based on the ferrite thermochemical cycle in a pilot plant in the Plataforma Solar de Almería (PSA). The methodology followed for the solar reactor design is described, as well as the experimental tests carried out during the testing campaign and characterization of the reactor. The CFD model developed for the thermal design of the solar reactor has been validated against the experimental measurements, with a temperature error ranging from 1% to around 10% depending on the location within the reactor. The thermal balance in the reactor (cavity and tubes) has been also solved by the CFD model, showing a 7.9% thermal efficiency of the reactor. CFD results also show the percentage of reacting media inside the tubes which achieve the required temperature for the endothermic reaction process, with 90% of the ferrite pellets inside the tubes above the required temperature of 900 °C. The multi-tubular solar reactor designed with aid of CFD modelling and simulations has been built and operated successfully.
- 8 November 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2033 (1) , 130010
HYDROSOL-PLANT: Structured redox reactors for H2 production from solar thermochemical H2O splitting
The “holy grail” of solar chemistry and solar engineering, is the technical storage of solar energy into a more easily transformable and transportable form, namely an energy carrier such as H2. The two-step redox-based solar thermochemical H2O splitting cycle is considered to be among the most promising approaches for the production of H2 from entirely renewable sources (solar energy and water). In this redox cycle an active material is initially reduced thermally under inert atmosphere and at the next step it is oxidized from H2O producing H2. The materials that have been in the core of solar chemistry research are metal oxides such as ferrites, cerium oxides, perovskites, etc. The reactor types that are being investigated for the redox thermochemical splitting of H2O are either powder-particle reactors or structured reactors. In the current work Ni-ferrite and Ce-oxide structured into different monolithic bodies (honeycombs, foams) were evaluated w.r.t. their redox activity. Based on this investigation, the most promising structure was further scaled-up for the construction of the full-scale reactors of the HYDROSOL-PLANT solar plant installation.
- 8 November 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2033 (1) , 130010
HYDROSOL-PLANT: Structured redox reactors for H2 production from solar thermochemical H2O splitting
The “holy grail” of solar chemistry and solar engineering, is the technical storage of solar energy into a more easily transformable and transportable form, namely an energy carrier such as H2. The two-step redox-based solar thermochemical H2O splitting cycle is considered to be among the most promising approaches for the production of H2 from entirely renewable sources (solar energy and water). In this redox cycle an active material is initially reduced thermally under inert atmosphere and at the next step it is oxidized from H2O producing H2. The materials that have been in the core of solar chemistry research are metal oxides such as ferrites, cerium oxides, perovskites, etc. The reactor types that are being investigated for the redox thermochemical splitting of H2O are either powder-particle reactors or structured reactors. In the current work Ni-ferrite and Ce-oxide structured into different monolithic bodies (honeycombs, foams) were evaluated w.r.t. their redox activity. Based on this investigation, the most promising structure was further scaled-up for the construction of the full-scale reactors of the HYDROSOL-PLANT solar plant installation.