Thilo Eickhorst
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Thilo Eickhorst has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
Stefan Knauth
Soil Microbial Ecology, University of Bremen, Bremen, Germany
3 shared publications- Wilfred Otten
School of Water, Energy and Environment, Cranfield University, Cranfield, UK
3 shared publications Ling Liu
Soil Microbial Ecology, University of Bremen, Bremen, Germany
2 shared publicationsLonghua Wu
Key Laboratory of Soil Environment and Pollution Remediation, Chinese Academy of Sciences, Institute of Soil Science, Nanjing, China
2 shared publications- Philippe Baveye
Saint Loup Research Institute, 7 rue des chênes, La Grande Romelière, 79600 Saint Loup Lamairé, France
2 shared publications A Ngakou
Department of Biological Sciences, University of Ngaoundéré, Ngaoundéré, Cameroon
1 shared publication
Latest Publications
- Open Access
- 1 February 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 648 (1) , 012160
Long-term impact of single biochar and compost application on soil aggregation
Soil aggregation is an important indicator of soil quality and highly responsive to management such as application of organic amendments. Compost generally increases aggregate stability and enhances soil microbial activity, while the effects of biochar on these factors remain inconclusive. We investigated the effect of biochar and compost on soil aggregation and microbial abundance at an experimental soil rehabilitation site in Ngaoundéré, Cameroon. Sampling was carried out 3.5 years after installation of the site. Both amendments improved bulk density, hydraulic conductivity, pH, and base saturation. Cation exchange capacity and soil organic matter (SOM) content were rather a function of soil texture than influenced by the amendments. Bacterial abundance increased in the compost, but not in the biochar treatment. Fungi were more frequent in smaller aggregates, but did not respond to the treatments. Macroaggregates 400 – 2,000 µm contributed ca. 75 % of the soil functions assessed. Yet, SOM content was 4 times higher in microaggregates < 50 µm than in macroaggregates throughout all treatments. We conclude that single applications of organic amendments can have positive long-term effects on soil aggregation in undisturbed degraded soils, particularly in the macroaggregate fraction. Microaggregates harbour fungal hyphae and are rich in SOM, independent of amendments.
- 1 February 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 648 (1) , 012160
Open AccessLong-term impact of single biochar and compost application on soil aggregation
Soil aggregation is an important indicator of soil quality and highly responsive to management such as application of organic amendments. Compost generally increases aggregate stability and enhances soil microbial activity, while the effects of biochar on these factors remain inconclusive. We investigated the effect of biochar and compost on soil aggregation and microbial abundance at an experimental soil rehabilitation site in Ngaoundéré, Cameroon. Sampling was carried out 3.5 years after installation of the site. Both amendments improved bulk density, hydraulic conductivity, pH, and base saturation. Cation exchange capacity and soil organic matter (SOM) content were rather a function of soil texture than influenced by the amendments. Bacterial abundance increased in the compost, but not in the biochar treatment. Fungi were more frequent in smaller aggregates, but did not respond to the treatments. Macroaggregates 400 – 2,000 µm contributed ca. 75 % of the soil functions assessed. Yet, SOM content was 4 times higher in microaggregates < 50 µm than in macroaggregates throughout all treatments. We conclude that single applications of organic amendments can have positive long-term effects on soil aggregation in undisturbed degraded soils, particularly in the macroaggregate fraction. Microaggregates harbour fungal hyphae and are rich in SOM, independent of amendments.
- Open Access
- 24 April 2020
- Published by Wiley in European Journal of Soil Science
- Vol. 72 (1) , 141-153
Influence of soil structure on the spread of Pseudomonas fluorescens in soil at microscale
For over a half a century, researchers have been aware of the fact that the physical and chemical characteristics of microenvironments in soils strongly influence the activity, growth and metabolism of microorganisms. However, many aspects of the effect of soil physical characteristics, such as the pore geometry, remain poorly understood. Therefore, the objective of the present research was to determine the influence of soil pore characteristics on the spread of bacteria, observed at the scale relevant to microbes. Pseudomonas fluorescens was introduced in columns filled with 1–2 mm soil aggregates, packed at different bulk densities. Soil microcosms were scanned at 10.87 μm voxel resolution using X‐ray computed tomography (CT) to characterize the geometry of pores. Thin sections were prepared to determine the spread and colonization of bacteria. The results showed that average bacterial cell density was 174 cells mm −2 in soil with bulk density of 1.3 g cm −3 and 99 cells mm −2 in soil with bulk density of 1.5 g cm −3 . Soil porosity and solid‐pore interfaces influence the spread of bacteria and their colonization of the pore space at lower bulk density, resulting in relatively higher bacterial densities in larger pore spaces. The study also demonstrates that thin sectioning of resin‐impregnated soil samples can be combined with X‐ray CT to visualize bacterial colonization of a 3D pore volume. This research therefore represents a significant step towards understanding how environmental change and soil management impact bacterial diversity in soils. Highlights: We used a quantitative approach to study bacterial spread in soil at scales relevant to microbes. The rate of pseudomonas spread decreased with increased bulk density of soil. Soil porosity and soil‐pore interface influence Pseudomonas in lower bulk density soil. Soil structure with different pore characteristics effects spread and activity of bacteria in soil.
- 24 April 2020
- Published by Wiley in European Journal of Soil Science
- Vol. 72 (1) , 141-153
Open AccessInfluence of soil structure on the spread of Pseudomonas fluorescens in soil at microscale
For over a half a century, researchers have been aware of the fact that the physical and chemical characteristics of microenvironments in soils strongly influence the activity, growth and metabolism of microorganisms. However, many aspects of the effect of soil physical characteristics, such as the pore geometry, remain poorly understood. Therefore, the objective of the present research was to determine the influence of soil pore characteristics on the spread of bacteria, observed at the scale relevant to microbes. Pseudomonas fluorescens was introduced in columns filled with 1–2 mm soil aggregates, packed at different bulk densities. Soil microcosms were scanned at 10.87 μm voxel resolution using X‐ray computed tomography (CT) to characterize the geometry of pores. Thin sections were prepared to determine the spread and colonization of bacteria. The results showed that average bacterial cell density was 174 cells mm −2 in soil with bulk density of 1.3 g cm −3 and 99 cells mm −2 in soil with bulk density of 1.5 g cm −3 . Soil porosity and solid‐pore interfaces influence the spread of bacteria and their colonization of the pore space at lower bulk density, resulting in relatively higher bacterial densities in larger pore spaces. The study also demonstrates that thin sectioning of resin‐impregnated soil samples can be combined with X‐ray CT to visualize bacterial colonization of a 3D pore volume. This research therefore represents a significant step towards understanding how environmental change and soil management impact bacterial diversity in soils. Highlights: We used a quantitative approach to study bacterial spread in soil at scales relevant to microbes. The rate of pseudomonas spread decreased with increased bulk density of soil. Soil porosity and soil‐pore interface influence Pseudomonas in lower bulk density soil. Soil structure with different pore characteristics effects spread and activity of bacteria in soil.
- 13 November 2019
- Published by Taylor & Francis in Archives of Agronomy and Soil Science
- Vol. 66 (11) , 1546-1555
Cry1Ab/Ac proteins released from subspecies of Bacillus thuringiensis ( Bt ) and transgenic Bt -rice in different paddy soils
As Bacillus thuringiensis (Bt) are entomopathogenic bacteria for use as biological insecticide and serve as a main source for genetically modified crops, it is imperative to investigate fate of Bt-toxins (Cry-proteins) released in soil. Four differently textured paddy soils, i.e. sandy loam, loam, silt loam and silty clay, were selected to investigate production and release of Cry-proteins by two Bt-strains (subspecies thuringiensis and kurstaki) and by transgenic Bt-rice (cultivar TT51-1). After amended with Cry-proteins, soil can adsorb proteins while sorption rate was variable among different paddy soils, with the highest amount of Cry-proteins in the silty clay soil. During the period of incubation with Bt-strains, the silty clay soil showed significant accumulation of Cry-proteins. Additionally, level of Cry-protein production was different between two Bt-strains. Inactivation of indigenous microorganisms in the soil samples led to slightly higher production of Cry-proteins by Bt-strains in all four soil types. Cry-proteins were released via root exudates of transgenic Bt-rice in sterile hydroponic culture and in non-sterile soils throughout the growth of plants. Protein release significantly varied among different paddy soils, up to 34.9 ng Cry-proteins g−1 soil in clayey soil. It indicates differently textured paddy soils reflect variable sorption, persistence, and accumulation of Cry-proteins.
- 13 November 2019
- Published by Taylor & Francis in Archives of Agronomy and Soil Science
- Vol. 66 (11) , 1546-1555
Cry1Ab/Ac proteins released from subspecies of Bacillus thuringiensis ( Bt ) and transgenic Bt -rice in different paddy soils
As Bacillus thuringiensis (Bt) are entomopathogenic bacteria for use as biological insecticide and serve as a main source for genetically modified crops, it is imperative to investigate fate of Bt-toxins (Cry-proteins) released in soil. Four differently textured paddy soils, i.e. sandy loam, loam, silt loam and silty clay, were selected to investigate production and release of Cry-proteins by two Bt-strains (subspecies thuringiensis and kurstaki) and by transgenic Bt-rice (cultivar TT51-1). After amended with Cry-proteins, soil can adsorb proteins while sorption rate was variable among different paddy soils, with the highest amount of Cry-proteins in the silty clay soil. During the period of incubation with Bt-strains, the silty clay soil showed significant accumulation of Cry-proteins. Additionally, level of Cry-protein production was different between two Bt-strains. Inactivation of indigenous microorganisms in the soil samples led to slightly higher production of Cry-proteins by Bt-strains in all four soil types. Cry-proteins were released via root exudates of transgenic Bt-rice in sterile hydroponic culture and in non-sterile soils throughout the growth of plants. Protein release significantly varied among different paddy soils, up to 34.9 ng Cry-proteins g−1 soil in clayey soil. It indicates differently textured paddy soils reflect variable sorption, persistence, and accumulation of Cry-proteins.
- 1 August 2019
- Published by Elsevier in Journal of Environmental Management
- Vol. 244, 415-421
Degradation of transgenic Bt-rice straw incorporated with two different paddy soils
- 1 August 2019
- Published by Elsevier in Journal of Environmental Management
- Vol. 244, 415-421
Degradation of transgenic Bt-rice straw incorporated with two different paddy soils
- Open Access
- 13 July 2018
- Published by Frontiers Media SA in Frontiers in Environmental Science
- Vol. 6
Control of Pore Geometry in Soil Microcosms and Its Effect on the Growth and Spread of Pseudomonas and Bacillus sp.
Simplified experimental systems, often referred to as microcosms, have played a central role in the development of modern ecological thinking on issues ranging from competitive exclusion to examination of spatial resources and competition mechanisms, with important model-driven insights to the field. It is widely recognized that soil architecture is the key driver of biological and physical processes underpinning ecosystem services, and the role of soil architecture and soil physical conditions is receiving growing interest. The difficulty to capture the architectural heterogeneity in microcosms means that we typically disrupt physical architecture when collecting soils. We then use surrogate measures of soil architecture such as aggregate size distribution and bulk-density, in an attempt to recreate conditions encountered in the field. These bulk-measures are too crude and do not describe the heterogeneity at microscopic scales where microorganisms operate. In the current paper we therefore ask the following questions: (i) To what extent can we control the pore geometry at microscopic scales in microcosm studies through manipulation of common variables such as density and aggregate size?; (ii) What is the effect of pore geometry on the growth and spread dynamics of bacteria following introduction into soil? To answer these questions, we focus on Pseudomonas sp. and Bacillus sp. We study the growth of populations introduced in replicated microcosms packed at densities ranging from 1.2 to 1.6 g cm−3, as well as packed with different aggregate sizes at identical bulk-density. We use X-ray CT and show how pore geometrical properties at microbial scales such as connectivity and solid-pore interface area, are affected by the way we prepare microcosms. At a bulk-density of 1.6 g cm−3 the average number of Pseudomonas was 63% lower than at a bulk-density of 1.3 g cm−3. For Bacillus this reduction was 66%. Depending on the physical conditions, bacteria in half the samples took between 1.62 and 9.22 days to spread 1.5 cm. Bacillus did spread faster than Pseudomonas and both did spread faster at a lower bulk-density. Our results highlight the importance that soil physical properties be considered in greater detail in soil microbiological studies than is currently the case.
- 13 July 2018
- Published by Frontiers Media SA in Frontiers in Environmental Science
- Vol. 6
Open AccessControl of Pore Geometry in Soil Microcosms and Its Effect on the Growth and Spread of Pseudomonas and Bacillus sp.
Simplified experimental systems, often referred to as microcosms, have played a central role in the development of modern ecological thinking on issues ranging from competitive exclusion to examination of spatial resources and competition mechanisms, with important model-driven insights to the field. It is widely recognized that soil architecture is the key driver of biological and physical processes underpinning ecosystem services, and the role of soil architecture and soil physical conditions is receiving growing interest. The difficulty to capture the architectural heterogeneity in microcosms means that we typically disrupt physical architecture when collecting soils. We then use surrogate measures of soil architecture such as aggregate size distribution and bulk-density, in an attempt to recreate conditions encountered in the field. These bulk-measures are too crude and do not describe the heterogeneity at microscopic scales where microorganisms operate. In the current paper we therefore ask the following questions: (i) To what extent can we control the pore geometry at microscopic scales in microcosm studies through manipulation of common variables such as density and aggregate size?; (ii) What is the effect of pore geometry on the growth and spread dynamics of bacteria following introduction into soil? To answer these questions, we focus on Pseudomonas sp. and Bacillus sp. We study the growth of populations introduced in replicated microcosms packed at densities ranging from 1.2 to 1.6 g cm−3, as well as packed with different aggregate sizes at identical bulk-density. We use X-ray CT and show how pore geometrical properties at microbial scales such as connectivity and solid-pore interface area, are affected by the way we prepare microcosms. At a bulk-density of 1.6 g cm−3 the average number of Pseudomonas was 63% lower than at a bulk-density of 1.3 g cm−3. For Bacillus this reduction was 66%. Depending on the physical conditions, bacteria in half the samples took between 1.62 and 9.22 days to spread 1.5 cm. Bacillus did spread faster than Pseudomonas and both did spread faster at a lower bulk-density. Our results highlight the importance that soil physical properties be considered in greater detail in soil microbiological studies than is currently the case.
- 18 October 2016
- Published by Springer Nature
- p. 545-557
Gold-FISH: In Situ Hybridization of Microbial Cells for Combined Fluorescence and Scanning Electron Microscopy
- 18 October 2016
- Published by Springer Nature
- p. 545-557
Gold-FISH: In Situ Hybridization of Microbial Cells for Combined Fluorescence and Scanning Electron Microscopy
- Open Access
- 2 June 2016
- Published by Springer Nature in Plant and Soil
- Vol. 408 (1-2) , 357-368
Analysis of physical pore space characteristics of two pyrolytic biochars and potential as microhabitat
- 2 June 2016
- Published by Springer Nature in Plant and Soil
- Vol. 408 (1-2) , 357-368
Open AccessAnalysis of physical pore space characteristics of two pyrolytic biochars and potential as microhabitat