Atsushi Nakamura
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Atsushi Nakamura has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
Yusuke Koshikiya
NTT Corporation
13 shared publicationsTetsuya Manabe
Graduate School of Engineering, Mie University, 1577 Kurimamachiya-cho, Tsu, Mie 514-8507, Japan
9 shared publications- Yusuke Koshikiya
Access Network Service Systems Laboratories, NTT Corporation, Tsukuba, Japan
8 shared publications Keiji Okamoto
6 shared publications- Chao Zhang
Interdisciplinary Faculty of Science and Engineering, Shimane University, Matsue, Japan
4 shared publications Tomokazu Oda
Access Network Service Systems Laboratories, NTT Corporation, 1-7-1 Hanabatake, Tsukuba, Ibaraki 305-0805, Japan
4 shared publications
Latest Publications
- 7 October 2026
- Published by Optica Publishing Group in Applied Optics
- Vol. 65 (29) , 10306-10313
Range expansion of FMCW LiDAR by using a swept optical frequency comb and phase noise compensation
In frequency-modulated continuous-wave (FMCW) ranging, there exist fundamental limitations on the measurement distance, refresh rate, and depth resolution imposed by the bandwidth of the photodetector. In addition, the coherence of the light source degrades interferometric performance in long-range measurements, thereby constituting another limiting factor on the achievable measurement distance. In this paper, we propose a wavelength-swept optical frequency comb–based approach to overcome the bandwidth-imposed limitation. Furthermore, by applying a phase noise compensation (PNC) method originally developed for optical frequency domain reflectometry (OFDR), the coherence-related limitation is simultaneously mitigated, enabling long-range and high-precision FMCW LiDAR. The theoretical framework of the proposed scheme is presented, and proof-of-principle experiments under fiber-emulated long-delay conditions are performed to demonstrate mitigation of the bandwidth limitation using a wavelength-swept frequency comb with three discrete frequency components. In addition, the coherence-limited range is extended to 12 times that achievable with conventional FMCW schemes.
- 7 October 2026
- Published by Optica Publishing Group in Applied Optics
- Vol. 65 (29) , 10306-10313
Range expansion of FMCW LiDAR by using a swept optical frequency comb and phase noise compensation
In frequency-modulated continuous-wave (FMCW) ranging, there exist fundamental limitations on the measurement distance, refresh rate, and depth resolution imposed by the bandwidth of the photodetector. In addition, the coherence of the light source degrades interferometric performance in long-range measurements, thereby constituting another limiting factor on the achievable measurement distance. In this paper, we propose a wavelength-swept optical frequency comb–based approach to overcome the bandwidth-imposed limitation. Furthermore, by applying a phase noise compensation (PNC) method originally developed for optical frequency domain reflectometry (OFDR), the coherence-related limitation is simultaneously mitigated, enabling long-range and high-precision FMCW LiDAR. The theoretical framework of the proposed scheme is presented, and proof-of-principle experiments under fiber-emulated long-delay conditions are performed to demonstrate mitigation of the bandwidth limitation using a wavelength-swept frequency comb with three discrete frequency components. In addition, the coherence-limited range is extended to 12 times that achievable with conventional FMCW schemes.
- 1 January 2026
- Published by Optica Publishing Group
- p. STU1A.5
Bandwidth-Dependent Backscattering in Hollow-Core Fiber Measured by Coherent Optical Time Domain Reflectometry
We show that measurement bandwidth affects backscattering in hollow-core fiber by shifting the balance between air-molecule and glass-surface scattering. This change alters observed backscattering levels and is critical for interpreting OTDR traces and fiber diagnostics.
- 1 January 2026
- Published by Optica Publishing Group
- p. STU1A.5
Bandwidth-Dependent Backscattering in Hollow-Core Fiber Measured by Coherent Optical Time Domain Reflectometry
We show that measurement bandwidth affects backscattering in hollow-core fiber by shifting the balance between air-molecule and glass-surface scattering. This change alters observed backscattering levels and is critical for interpreting OTDR traces and fiber diagnostics.
- 10 October 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (21) , 44179-44190
Mathematical model for splice loss estimation in few-mode fibers based on mode field diameter
We present an extended mathematical model for estimating splice losses in few-mode fibers (FMFs). The proposed model accounts for mode field diameter (MFD) mismatch between spliced fibers and reveals a quantitative relationship between MFD and splice loss for each mode. Numerical simulations validate our mathematical analysis, demonstrating that the model can accurately estimate splice losses for each mode using MFDs. This capability makes it a valuable tool for telecom operators in designing FMF transmission distances and optimizing the number of splices.
- 10 October 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (21) , 44179-44190
Mathematical model for splice loss estimation in few-mode fibers based on mode field diameter
We present an extended mathematical model for estimating splice losses in few-mode fibers (FMFs). The proposed model accounts for mode field diameter (MFD) mismatch between spliced fibers and reveals a quantitative relationship between MFD and splice loss for each mode. Numerical simulations validate our mathematical analysis, demonstrating that the model can accurately estimate splice losses for each mode using MFDs. This capability makes it a valuable tool for telecom operators in designing FMF transmission distances and optimizing the number of splices.
- 11 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (18) , 6431-6436
Inter-Modal Interferometry Using Two-Mode Region of Single-Mode Fibers for Vibration Sensing
Interest is growing in the use of telecom fiber networks for sensing purposes. Notably, vibration sensing has the potential not only for network health monitoring but also for generating new revenue sources. Interferometry is an appealing option for vibration sensing because of its simple structure and low cost. This method can be implemented using two inactive single-mode fibers (SMFs). However, two inactive SMFs may not always be available. In addition, interferometry using two SMFs typically requires access to both ends of the SMFs, which can sometimes be impractical. Therefore, a method for achieving single-end vibration sensing using a single SMF while maintaining simplicity and low-cost is necessary. In this paper, we propose a novel vibration sensing method that is based on inter-modal interference using the two-mode region of conventional SMFs. The proposed method forms an interferometer with one SMF using the fundamental and second-order modes as two separate paths. By analyzing the interference between the two modes, one can detect the vibration applied to the SMF. We also extend the method to enable single-end vibration sensing by adding a reflector at the far-end of the SMF. Proof-of-concept experiments demonstrated the capability of single-end vibration sensing.
- 11 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (18) , 6431-6436
Inter-Modal Interferometry Using Two-Mode Region of Single-Mode Fibers for Vibration Sensing
Interest is growing in the use of telecom fiber networks for sensing purposes. Notably, vibration sensing has the potential not only for network health monitoring but also for generating new revenue sources. Interferometry is an appealing option for vibration sensing because of its simple structure and low cost. This method can be implemented using two inactive single-mode fibers (SMFs). However, two inactive SMFs may not always be available. In addition, interferometry using two SMFs typically requires access to both ends of the SMFs, which can sometimes be impractical. Therefore, a method for achieving single-end vibration sensing using a single SMF while maintaining simplicity and low-cost is necessary. In this paper, we propose a novel vibration sensing method that is based on inter-modal interference using the two-mode region of conventional SMFs. The proposed method forms an interferometer with one SMF using the fundamental and second-order modes as two separate paths. By analyzing the interference between the two modes, one can detect the vibration applied to the SMF. We also extend the method to enable single-end vibration sensing by adding a reflector at the far-end of the SMF. Proof-of-concept experiments demonstrated the capability of single-end vibration sensing.
- 13 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (5) , 1616-1625
Test Method of Splice Points for Constructing Uncoupled Multi-Core Fiber Transmission Line With Low Inter-Core Crosstalk
A key requirement for transmission systems using uncoupled multi-core fibers (MCFs) is the far-end crosstalk (XT), as it limits the transmission capacity and distance of the system. Far-end XT is determined by both the losses of each core and the mode coupling between cores. They occur not only in all system components such as the MCFs themselves and the related input-output devices but also at splice points generated when constructing transmission lines. Therefore, telecommunication carriers have to test the construction quality of the splices to keep the far-end XT of uncoupled MCF transmission lines low. In this work, we numerically investigate how splices in the transmission line using MCFs affect the far-end XT. On the basis of this investigation, we present how to determine the requirements for each splice and propose a method using general-purpose optical time domain reflectometers (OTDRs) for testing the construction quality of the splices to suppress the far-end XT. We also conduct experiments that demonstrate the validity of our numerical investigation. The proposed method will be useful for testing the quality of construction work at the splice points of MCF transmission lines since it can be implemented using general-purpose OTDRs without introducing new instruments.
- 13 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (5) , 1616-1625
Test Method of Splice Points for Constructing Uncoupled Multi-Core Fiber Transmission Line With Low Inter-Core Crosstalk
A key requirement for transmission systems using uncoupled multi-core fibers (MCFs) is the far-end crosstalk (XT), as it limits the transmission capacity and distance of the system. Far-end XT is determined by both the losses of each core and the mode coupling between cores. They occur not only in all system components such as the MCFs themselves and the related input-output devices but also at splice points generated when constructing transmission lines. Therefore, telecommunication carriers have to test the construction quality of the splices to keep the far-end XT of uncoupled MCF transmission lines low. In this work, we numerically investigate how splices in the transmission line using MCFs affect the far-end XT. On the basis of this investigation, we present how to determine the requirements for each splice and propose a method using general-purpose optical time domain reflectometers (OTDRs) for testing the construction quality of the splices to suppress the far-end XT. We also conduct experiments that demonstrate the validity of our numerical investigation. The proposed method will be useful for testing the quality of construction work at the splice points of MCF transmission lines since it can be implemented using general-purpose OTDRs without introducing new instruments.
- 20 June 2023
- Published by Elsevier in Optics Communications
- Vol. 545
Long-range frequency-modulated continuous-wave LiDAR employing wavelength-swept optical frequency comb
- 20 June 2023
- Published by Elsevier in Optics Communications
- Vol. 545
Long-range frequency-modulated continuous-wave LiDAR employing wavelength-swept optical frequency comb
- 3 May 2023
- Published by Optica Publishing Group in Optics Letters
- Vol. 48 (10) , 2551-2554
Ultrafast measurement of vector spatial modes by using two-dimensional linear optical sampling
To the best of the authors’ knowledge, we present the first-ever demonstration of the two-dimensional linear optical sampling of fiber spatial modes. The images of the fiber cross sections excited by the LP01 or LP11 modes are directly projected onto a two-dimensional photodetector array and coherently sampled by local pulses with a uniform spatial distribution. Consequently, the spatiotemporal complex amplitude of the fiber mode is observed with a time resolution of a few picoseconds by using electronics with a bandwidth of only a few MHz. Such ultrafast and direct observation of vector spatial modes enables the characterization of the space-division multiplexing fiber itself with high time accuracy and wide bandwidth.
- 3 May 2023
- Published by Optica Publishing Group in Optics Letters
- Vol. 48 (10) , 2551-2554
Ultrafast measurement of vector spatial modes by using two-dimensional linear optical sampling
To the best of the authors’ knowledge, we present the first-ever demonstration of the two-dimensional linear optical sampling of fiber spatial modes. The images of the fiber cross sections excited by the LP01 or LP11 modes are directly projected onto a two-dimensional photodetector array and coherently sampled by local pulses with a uniform spatial distribution. Consequently, the spatiotemporal complex amplitude of the fiber mode is observed with a time resolution of a few picoseconds by using electronics with a bandwidth of only a few MHz. Such ultrafast and direct observation of vector spatial modes enables the characterization of the space-division multiplexing fiber itself with high time accuracy and wide bandwidth.
- 23 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (10) , 3153-3163
Bandwidth-Decomposed Analysis of Spatial-Mode Dispersion of Coupled 2-Core Fiber Employing Linear Optical Sampling
The complex impulse responses of two types of coupled 2-core fibers, with homogeneous and heterogeneous cores, were measured by using a measurement system based on linear optical sampling. The measurements were performed over a bandwidth of 20 nm (∼2.5 THz), and the spatial-mode dispersion (SMD) was analyzed. Several lengths of both homogeneous and heterogeneous core fibers were prepared to investigate the length dependence of SMD. The SMDs for divided frequency bands were examined by numerically analyzing the measured broadband impulse response. Consequently, the power impulse response at each subband was obtained, and the variation in the SMDs was examined. In addition, the statistical distribution of the SMD was revealed to be different for each type of the 2-core fiber. The SMD observed at a specific band is handled by the receiver in space-division multiplexing transmission systems. Finally, we present a measurement of mode dependent loss (MDL) of a 2-core fiber, and discuss the impact of time axis inaccuracy to the MDL measurement. These analyses performed are expected to be beneficial for designing such systems.
- 23 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (10) , 3153-3163
Bandwidth-Decomposed Analysis of Spatial-Mode Dispersion of Coupled 2-Core Fiber Employing Linear Optical Sampling
The complex impulse responses of two types of coupled 2-core fibers, with homogeneous and heterogeneous cores, were measured by using a measurement system based on linear optical sampling. The measurements were performed over a bandwidth of 20 nm (∼2.5 THz), and the spatial-mode dispersion (SMD) was analyzed. Several lengths of both homogeneous and heterogeneous core fibers were prepared to investigate the length dependence of SMD. The SMDs for divided frequency bands were examined by numerically analyzing the measured broadband impulse response. Consequently, the power impulse response at each subband was obtained, and the variation in the SMDs was examined. In addition, the statistical distribution of the SMD was revealed to be different for each type of the 2-core fiber. The SMD observed at a specific band is handled by the receiver in space-division multiplexing transmission systems. Finally, we present a measurement of mode dependent loss (MDL) of a 2-core fiber, and discuss the impact of time axis inaccuracy to the MDL measurement. These analyses performed are expected to be beneficial for designing such systems.
- 1 January 2023
- Published by Optica Publishing Group
- p. Tu3.55
Single-End Vibration Sensing Based on Inter-Modal Interference Using Two-Mode Region of Single-Mode Fibers
We propose a vibration sensing method based on inter-modal interferometry. Based on Fresnel reflection, the method enables us to detect the vibration frequency from just one end of a telecom fiber.
- 1 January 2023
- Published by Optica Publishing Group
- p. Tu3.55
Single-End Vibration Sensing Based on Inter-Modal Interference Using Two-Mode Region of Single-Mode Fibers
We propose a vibration sensing method based on inter-modal interferometry. Based on Fresnel reflection, the method enables us to detect the vibration frequency from just one end of a telecom fiber.
- 1 January 2023
- Published by Optica Publishing Group
- p. M4B.2
Definition of Mode Field Diameter for Few-Mode Fibers based on Stationary Expression of Propagation Constant
We derive a novel definition of mode field diameters (MFDs) for few-mode fibers (FMFs) from the wave equation. The MFDs obtained with our definition are useful in evaluating splice losses of each mode in FMFs.
- 1 January 2023
- Published by Optica Publishing Group
- p. M4B.2
Definition of Mode Field Diameter for Few-Mode Fibers based on Stationary Expression of Propagation Constant
We derive a novel definition of mode field diameters (MFDs) for few-mode fibers (FMFs) from the wave equation. The MFDs obtained with our definition are useful in evaluating splice losses of each mode in FMFs.