SAShino Bay Aguilera

Shino Bay Aguilera

*This is an algorithmically generated author record based on publicly available information.

Shino Bay Aguilera has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Physicochemical Properties of Two Poly-L-Lactic Acid Injectable Implants: Potential Impact on Their Biological Properties

    by Luiz Avelar, Alessandra Haddad, Sabrina G. Fabi, Michael Somenek, Katie Beleznay, Shino Bay Aguilera, Kathryn Taylor-Barnes, Cheri Mao, Åke Öhrlund, Björn Lundgren, et al.

    This study evaluated the thermal properties, crystallinity, particle size, morphology, and in vivo local inflammation and persistence of two poly-L-lactic acid (PLLA) injectable implants, Sculptra® (PLLA-SCA) and GANA V® (PLLA-GA). PLLA-SCA and PLLA-GA underwent differential scanning calorimetry and X-ray powder diffraction to evaluate their thermal properties and degree of crystallinity. X-ray powder diffraction spectra displayed a sharper, more intense peak for PLLA-GA than PLLA-SCA, with smaller peaks on either side of the main peak of PLLA-GA but not PLLA-SCA. Differential scanning calorimetry thermograms indicated three thermal events for both PLLA-SCA and PLLA-GA. For PLLA-SCA, the first two events occurred between 65 °C and 90 °C, and the third event occurred at 165 °C. For PLLA-GA all three events occurred between 156 °C and 169 °C. Heating samples to 120 °C and cooling to room temperature prior to differential scanning calorimetry resulted in no thermal events being observed between 65–90 °C with either product, while three events were observed with PLLA-GA and one event with PLLA-SCA between 156 °C and 169 °C. The median volume distribution diameter was 46.4 µm for PLLA-SCA and 31.7 µm for PLLA-GA. Scanning electron microscopy showed PLLA-GA particles were irregular in shape, had no sharp edges and had a wrinkled and crimped surface, while PLLA-SCA particles displayed plate-like shapes and had smoother surfaces. In vivo inflammatory reactivity scores indicated a slight reaction for PLLA-SCA at all time points (3.7 ± 1.1, 6.1 ± 1.6, 5.7 ± 1.2 and 6.2 ± 1.2 at 2, 12, 26 and 52 weeks, respectively), while for PLLA-GA, a moderate reaction was observed at 12 and 26 weeks (2.9 ± 1.5, 10.1 ± 1.0, 9.4 ± 0.7 and 7.1 ± 1.3 at 2, 12, 26 and 52 weeks, respectively). PLLA-SCA and PLLA-GA had similar persistence scores at 2, 12 and 26 weeks, while at 52 weeks the score was markedly higher for PLLA-SCA versus PLLA-GA (1.9 ± 0.2 versus 0.7 ± 0.2). In conclusion, PLLA-SCA is more amorphous than PLLA-GA. The single melting point of PLLA-SCA contrasts with the broader spectrum of melting points for PLLA-GA suggests a more homogenous formulation of PLLA-SCA. This, and its less crystalline structure, result in the slower degradation rate and more sustained biological response of PLLA-SCA compared with PLLA-GA. The physiochemical properties of PLLAs affect the biological response in clinical practice and should be taken into consideration when selecting a PLLA treatment for aesthetic use.


  • Open Access

    Physicochemical Properties of Two Poly-L-Lactic Acid Injectable Implants: Potential Impact on Their Biological Properties

    by Luiz Avelar, Alessandra Haddad, Sabrina G Fabi, Michael Somenek, Katie Beleznay, Shino Bay Aguilera, Kathlyn Taylor-Barnes, Peter Morgan, Cheri Mao, Åke Öhrlund, et al.

    The objective of this study was to evaluate thermal properties and crystallinity of two poly-L-lactic acid (PLLA) injectable implants, Sculptra® (PLLA-SCA) and GANA V® (PLLA-GA), and the extent to which these properties might impact their biological response. PLLA-SCA and PLLA-GA (800mg/sample) underwent differential scanning calorimetry and X-ray powder diffraction to evaluate their thermal properties and degree of crystallinity. X-ray powder diffraction spectra displayed a sharper, more intense peak for PLLA-GA than PLLA-SCA, with smaller peaks on either side of the main peak of PLLA-GA but not PLLA-SCA. Differential scanning calorimetry thermograms indicated three thermal events for both PLLA-SCA and PLLA-GA. For PLLA-SCA, the first two events occurred between 65°C and 90°C and the third event occurred at 165°C. For PLLA-GA all three events occurred between 156°C and 169°C. Heating samples to 120°C and cooling to room temperature prior to differential scanning calorimetry resulted in no thermal events being observed between 65–90°C with either product, while three events were observed with PLLA-GA and one event with PLLA-SCA between 156°C and 169°C. In conclusion, PLLA-SCA is more amorphous than PLLA-GA. The single melting point of PLLA-SCA contrasts with the broader spectrum of melting points for PLLA-GA suggests a more homogenous formulation of PLLA-SCA. This, and its less crystalline structure, result in the slower degradation rate and more sustained biological response of PLLA-SCA compared with PLLA-GA. The physiochemical properties of PLLAs affect the biological response in clinical practice and should be taken into consideration when selecting a PLLA treatment for aesthetic use.


  • Open Access

    Guided SEFFI and CaHA: A Retrospective Observational Study of an Innovative Protocol for Regenerative Aesthetics

    by Fabrizio Melfa, Alec McCarthy, Shino Bay Aguilera, Jani van Loghem, Alessandro Gennai

    Background/Objectives: This retrospective observational study sought to determine the efficacy and safety of an innovative combined treatment protocol using guided Superficial Enhanced Fluid Fat Injection (SEFFI) and calcium hydroxylapatite (CaHA) in facial rejuvenation. Methods: A total of 158 patients (149 females and 9 males) underwent the combined treatment of guided SEFFI and diluted/hyperdiluted CaHA. The study evaluated treatment outcomes at 30, 90, and 150 days post-treatment using the Global Aesthetic Improvement Scale (GAIS) and three-dimensional photogrammetric analysis. Results: The combined treatment demonstrated consistent enhancement in skin quality and facial volume across temporal, malar, zygomatic, and jawline regions. At 90 days post-treatment, substantial improvements were observed, with the GAIS scores reflecting significant enhancements in both skin quality and volume, which were sustained or slightly improved by 150 days. Minor complications, predominantly ecchymosis at the injection sites, resolved within a week, confirming the treatments’ safety. Conclusions: The integration of guided SEFFI and CaHA resulted in significant improvements in skin quality and facial volume with minimal complications. Further research is recommended to consolidate these findings and explore long-term outcomes.


  • A Review of Aesthetic Considerations for Treating the Transgender Patient

    by Leila Cattelan, Steven Dayan, Shino Bay Aguilera, Bianca Viscomi, Sabrina G. Fabi

    BACKGROUND: As gender diversity becomes increasingly embraced by society, and despite growing recognition of the unique needs of transgender patients, the literature remains devoid of guidelines for gender affirming facial feminization or masculinization techniques. OBJECTIVE: The authors seek to identify and discuss target feminine and masculine facial features, as well as an armamentarium of surgical and nonsurgical strategies to effectively address and achieve them in the transgender population. METHODS: A search of the National Library of Medicine database (PubMed) was undertaken to identify the existing literature on gender-affirming facial feminization and masculinization techniques. RESULTS: The importance of assessing proportional relationships between the bitemporal, bizygomatic, and bigonial distances is discussed; ideal masculine faces possess a rectangular face shape, with ratios for these 3 areas tending toward 1:1:1. Conversely, the ideal female face is heart shaped with projection at the zygoma and a tapered jawline. Strategic positioning of the cheek apex serves as an anchor in sculpting a distinctly masculine or feminine face. Other considerations include the enhancement of skin quality and implications of hormonal therapy. CONCLUSION: The aesthetic considerations provided in this study can serve as a valuable guidance for aesthetic physicians seeking to deliver optimal care for their transitioning patients.


    • 1 January 2010
      • Vol. 85  (1) , 31-6

    Leukemia cutis in a patient with acute myelogenous leukemia: a case report and review of the literature.

    by Shino Bay Aguilera, Matthew Zarraga, Les Rosen

    Leukemia cutis is an infiltration of malignant neoplastic leukocytes or their precursors into the epidermis, dermis, or subcutis. These neoplastic cells are derived from abnormal leukocytes in the bone marrow where maturation aberrations occur. Acute myelogenous leukemia (AML) is the second most common cause of leukemia cutis and the most common leukemia among adults. In the elderly population, AML presents a challenge to the medical community because of the number of preexisting comorbid conditions and the safety profile of useful chemotherapeutic agents.