TMTatyana Martynova

Tatyana Martynova

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tatyana Martynova has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Dynamic modeling and selection of rational parameters for a millstone mill mechanism to reduce energy consumption

    by Yuriy Podgornyj, Vladimir Ivancivsky, Tatyana Martynova, Ayagma Zhargalova, Ziqi Tong, Egor Rozhnov, Gleb Drach, Alexey Morozov

    Introduction. Millstone mills hold a special place among the grinding equipment used in the food industry, as they produce flour with a high content of biologically valuable grain components through the repeated action of working surfaces on the processed material. However, existing industrial designs of millstone units are characterized by significant energy consumption caused by the high moments of inertia of the rotating millstones. In the context of the ongoing drive toward import substitution and modernization of grain processing enterprises, there is a need to develop new energy-efficient equipment that meets modern requirements for productivity and specific energy consumption. Despite the long history of millstone mill application, the issues of selecting rational inertial-mass characteristics and design parameters of the rotating millstone and their influence on the dynamic parameters of the drive and support forces remain insufficiently studied. The purpose of this study is to reduce the power consumption of a millstone mill by developing a dynamic model of the mechanism and determining rational design and kinematic parameters of the unit. Methods. Based on D'Alembert's principle, a system of differential equations of motion was formulated for a shaft with a disk (millstone), taking into account the eccentricity of the rotation axis relative to the geometric axis of the millstone. The law of motion was determined by numerical integration using the fourth-order Runge–Kutta method with variation of the moments of inertia of the rotating millstone (25.185–40.388 kg•m²) and driving torques (250–500 N•m). Support forces were then calculated by solving matrix equations of static equilibrium , using the previously obtained kinematic characteristics. Finally, a parametric analysis of the influence of inter-supports distances and manufacturing accuracy on the magnitude of support forces was carried out. Results and Discussion. It was found that reducing the moment of inertia of the rotating millstone from 40.388 to 25.185 kg•m² leads to a decrease in shaft acceleration time to steady-state rotational speed from 12.2–15.7 s to 7.2–10.0 s and to a reduction in maximum support forces at the most loaded support from 1,000–1,700 N to 600–1,000 N over the driving torque range of 300–500 N•m. It was shown that the rational inter-support distance is 0.58 m, and the permissible displacement of the rotation axis relative to the geometric axis of the millstone should not exceed 0.5–1.0 mm, at which the maximum support force does not exceed 360–700 N. For the proposed design with a millstone moment of inertia of 25.185 kg•m² and a driving torque of 280–300 N•m, the power consumption at the drive shaft was 10.5 kW, which is 50% lower than that of the industrial mill AVR 6-890 (21 kW) at a comparable capacity of 490 kg/h. The obtained results demonstrate the feasibility of structural lightening of the rotating millstone as an effective strategy for improving the energy efficiency of millstone mills.

  • Designing the homogenization mechanism

    by Yuriy Podgornyj, Vadim Skeeba, Tatyana Martynova, Artur Sadykin, Nikita Martyushev, Dmitry Lobanov, Arina Pelemeshko, Andrey Popkov

    Introduction. The primary goal of food processing equipment manufacturing is to create highly efficient process equipment that can increase labor productivity while reducing energy costs. Improving existing and creating new high-performance equipment for food production is one of the main trends in the development of modern mechanical engineering. The term “homogenization” literally means “increasing uniformity”. In the context of emulsions, homogenization refers to the process of treating emulsions, which leads to the fragmentation of the dispersed phase. Homogenization is the process of grinding liquid or mashed foods by passing it at high speed and pressure through narrow annular slots. The authors propose to use cam-type mechanisms for homogenization. Cam-type mechanisms allow for a more efficient allocation of the time for the product suction and injection. The homogenization process benefits from the potential to reduce the speed during product injection. The purpose of the work is to reduce power consumption during homogenization. The research methods are based on the theory of machines and mechanisms. These methods enabled developing a methodology for synthesizing the homogenizer drive mechanism and designing a machine that ensures its operation in accordance with the proposed cycle diagram. Results and discussion. The synthesis of mechanisms is executed with consideration for the workload, which was calculated for existing domestic machines in the production of processed cheese. Thus, with a given production capacity of 550 l/h and a plunger diameter of 28 mm, the technological force is F = 12315 N. In accordance with the authors' proposals, the design of the homogenizer is modified by introducing cam mechanisms. In the design of this drive, a novel cycle diagram is proposed, enabling an increase in product injection time and a reduction in suction time. According to the novel cycle diagram, 280° is proposed for product injection and 80° for suction. In this case, the power on the drive shaft is equal to P = 2.5 kW instead of 3.5 kW for the existing design, driven by a crank mechanism. The power consumption is decreased by 26 %.

  • Synthesis of the heddle drive mechanism

    by Yuriy Podgornyj, Vadim Skeeba, Tatyana Martynova, Dmitry Lobanov, Nikita Martyushev, Semyon Papko, Egor Rozhnov, Ivan Yulusov


  • Synthesis of technological machines. Calculation and design

    by Yuriy I. Podgornyj, Tatyana G. Martynova, Vadim Yu. Skeeba

    The issues of synthesis, analysis, dynamics and strength calculations of the technological machine mechanisms are considered in the monograph. A significant attention in the work is paid to the general approach to the synthesis of mechanisms of various classes, taking into account the technological load. The monograph may be of interest to a wide range of specialists involved in the development of technological equipment, and may also be useful for students and graduate students of technical universities, as well as for design engineers of machine-building enterprises. This research was funded by Russian Science Foundation project N 23-29-00945, https://rscf.ru/en/project/23-29-00945/.

  • Synthesis of the drive mechanism of the continuous production machine

    by Yuriy Podgornyj, Alexander Kirillov, Vadim Skeeba, Tatyana Martynova, Dmitry Lobanov, Nikita Martyushev


  • On the issue of limiting the irregular motion of a technological machine within specified limits

    by Yuriy Podgornyj, Tatyana Martynova, Vadim Skeeba

    Introduction. The problem of regulating speed fluctuations for any mechanism is essential, because the time interval of this movement is the working time during which the main technological operation is performed. In this case, the question may arise about the regulation of motion speeds both during acceleration, idling of the machine, and during the execution of the main technological operation. The main qualitative indicator of the satisfactory operation of any machine is the motion irregularity ratio, the value of which depends on the ratio of the maximum, minimum and average speeds of the drive shaft. Particularly acute is the problem of determining the motion irregularity ratio of the machine, taking into account the characteristics of the motor. In this case, the machine is considered as a system consisting of a single mass. The elasticity of the elements included in the machine is neglected. An analysis of the scientific literature in this area indicates that insufficient attention is paid to the study of rotation irregularities and its influence on the dynamics of mechanisms, especially when it comes to solving equations taking into account the characteristics of the motor. The purpose of this work is to develop a methodology that allows determining and regulate the non-uniform rotation of the drive shaft, taking into account the characteristics of the motor, the forces of useful resistance and the inertia of the masses of the mechanism. The relevance of the study is due to the lack of a unified methodology that allows adjusting the non-uniform rotation of the drive shaft at the stage of designing mechanisms of this type. Theory and methods. It is proposed to use the Lagrange equation of the second kind to determine the equation of machine motion in differential form. Mathematical simulation is carried out using the Mathcad and KOMPAS-3D application packages. Results and discussion. A methodology is presented that makes it possible to regulate the non-uniform rotation of the shaft. The CAE of the Mathcad system are used to determine the value of the irregularity ratio and patterns of change in these indicators are identified for total operating values that are in the range of 22-46 Nm. An analysis of the results of the calculations performed indicates that the irregularity ratio of the drive shaft rotation is 0.101. It is possible to change this ratio by changing the reduced moment of inertia by installing an additional flywheel or changing the torque of the motor shaft. The obtained results of the research made it possible to develop specific recommendations for the modernization of the drive designs for machines for mixing bulk materials and to outline ways for further research in this direction.


  • Determination of the rigidity and deformation energy of the technological machine load-carrying systems

    by Yurii Podgornyj, Vadim Skeeba, Aleksandr Kirillov, Ol'Ga Maksimchuk, Tat'Yana Martynova, Dmitrii Lobanov, Il'Ya Filatov, Pavel Skeeba


  • The methods of technological machines’ rotors balance

    by Podgornyj Yurii, Martynova Tat'Yana, Skeeba Vadim, Lobanov Dmitrii, Zhirova Anastasiya, Bredikhina Anna, Kosilov Aleksandr, Pechorkina Natal'Ya