Pierluigi Coli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Pierluigi Coli has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
Stig Karlsson
3 shared publicationsAnn Wennerberg
Department of Biomaterials/Handicap Research, Göteborg University, Göteborg, Sweden
1 shared publicationSimon Alaeddin
Department of Prosthetic Dentistry/Dental Materials Science, Faculty of Odontology, Göteborg University, Göteborg, Sweden
1 shared publication
Latest Publications
- 17 November 2004
- Vol. 17 (5) , 577-80
Precision of a CAD/CAM technique for the production of zirconium dioxide copings.
The precision of a computer-aided design/manufacturing (CAD/CAM) system to manufacture zirconium dioxide copings with a predetermined internal space was investigated. Two master models were produced in acrylic resin. One was directly scanned by the Decim Reader. The Decim Producer then manufactured 10 copings from prefabricated zirconium dioxide blocks. Five copings were prepared, aiming for an internal space to the master of 45 microm. The other five copings were prepared for an internal space of 90 microm. The second test model was used to try in the copings produced. The obtained internal space of the ceramic copings was evaluated by separate measurements of the master models and inner surfaces of the copings. The master models were measured at predetermined points with an optical instrument. The zirconium dioxide copings were measured with a contact instrument at the corresponding sites measured in the masters. The first group of copings had a mean internal space to the scanned master of 41 microm and of 53 microm to the try-in master. In general, the internal space along the axial walls of the masters was smaller than that along the occlusal walls. The second group had a mean internal space of 82 microm to the scanned master and of 90 microm to the try-in master. The aimed-for internal space of the copings was achieved by the manufacturer. The CAD/CAM technique tested provided high precision in the manufacture of zirconium dioxide copings.
- 17 November 2004
- Vol. 17 (5) , 577-80
Precision of a CAD/CAM technique for the production of zirconium dioxide copings.
The precision of a computer-aided design/manufacturing (CAD/CAM) system to manufacture zirconium dioxide copings with a predetermined internal space was investigated. Two master models were produced in acrylic resin. One was directly scanned by the Decim Reader. The Decim Producer then manufactured 10 copings from prefabricated zirconium dioxide blocks. Five copings were prepared, aiming for an internal space to the master of 45 microm. The other five copings were prepared for an internal space of 90 microm. The second test model was used to try in the copings produced. The obtained internal space of the ceramic copings was evaluated by separate measurements of the master models and inner surfaces of the copings. The master models were measured at predetermined points with an optical instrument. The zirconium dioxide copings were measured with a contact instrument at the corresponding sites measured in the masters. The first group of copings had a mean internal space to the scanned master of 41 microm and of 53 microm to the try-in master. In general, the internal space along the axial walls of the masters was smaller than that along the occlusal walls. The second group had a mean internal space of 82 microm to the scanned master and of 90 microm to the try-in master. The aimed-for internal space of the copings was achieved by the manufacturer. The CAD/CAM technique tested provided high precision in the manufacture of zirconium dioxide copings.
- 11 March 2004
- Vol. 17 (1) , 59-64
Fit of a new pressure-sintered zirconium dioxide coping.
The aim of this study was to determine in vitro the internal and marginal fit of zirconium dioxide ceramic copings manufactured using a recently introduced CAD/CAM-based technique (Denzir). Two master models were produced in metal, representing the maxillary right central incisor and first premolar. Two A-silicone impressions were used for each of the master models, and from each of the impressions five stone dies with the corresponding ceramic copings were produced, for a total of 20 copings. The A-silicone replica of the misfit of the ceramic coping to the corresponding stone die and master model was sectioned buccolingually and mesiodistally. The obtained sections were measured at occlusal, axial, and marginal locations under light microscopy. Twenty-four measurements for each replica were made. The Student's t test was used to detect significant differences between coping-stone die and coping-master model misfits. For any combination, the marginal fit was superior to the axial and occlusal fit. In general, the misfit between the coping and the stone die did not differ significantly from the misfit detected between the coping and the master model. However, a better fit was recorded for the first premolar at the occlusal portion in the coping-stone die combination compared to the coping-master model combination. The mean marginal discrepancy between the copings and master models was clearly below 50 microm, with a range of 0 to 115 microm. The accuracy achieved by the Denzir manufacturing process for the production of zirconium dioxide copings is well within the range of clinical acceptability.
- 11 March 2004
- Vol. 17 (1) , 59-64
Fit of a new pressure-sintered zirconium dioxide coping.
The aim of this study was to determine in vitro the internal and marginal fit of zirconium dioxide ceramic copings manufactured using a recently introduced CAD/CAM-based technique (Denzir). Two master models were produced in metal, representing the maxillary right central incisor and first premolar. Two A-silicone impressions were used for each of the master models, and from each of the impressions five stone dies with the corresponding ceramic copings were produced, for a total of 20 copings. The A-silicone replica of the misfit of the ceramic coping to the corresponding stone die and master model was sectioned buccolingually and mesiodistally. The obtained sections were measured at occlusal, axial, and marginal locations under light microscopy. Twenty-four measurements for each replica were made. The Student's t test was used to detect significant differences between coping-stone die and coping-master model misfits. For any combination, the marginal fit was superior to the axial and occlusal fit. In general, the misfit between the coping and the stone die did not differ significantly from the misfit detected between the coping and the master model. However, a better fit was recorded for the first premolar at the occlusal portion in the coping-stone die combination compared to the coping-master model combination. The mean marginal discrepancy between the copings and master models was clearly below 50 microm, with a range of 0 to 115 microm. The accuracy achieved by the Denzir manufacturing process for the production of zirconium dioxide copings is well within the range of clinical acceptability.
- 1 October 1999
- Published by Wiley in European Journal of Oral Sciences
- Vol. 107 (5) , 400-413
In vitro dentin pretreatment, Surface roughness and adhesive shear bond strength
Click on the article title to read more.
- 1 October 1999
- Published by Wiley in European Journal of Oral Sciences
- Vol. 107 (5) , 400-413
In vitro dentin pretreatment, Surface roughness and adhesive shear bond strength
Click on the article title to read more.