Ricardo Cantú
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ricardo Cantú has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
Alfred P. Dufour
National Exposure Research Laboratory and National Risk Management Research Laboratory, Office of Research and Development, United States Environmental Protection Agency, 26 West Martin Luther King Drive, Cincinnati, Ohio 45268
2 shared publicationsFred K. Kawahara
National Exposure Research Laboratory and National Risk Management Research Laboratory, Office of Research and Development, United States Environmental Protection Agency, 26 West Martin Luther King Drive, Cincinnati, Ohio 45268
2 shared publicationsOtis Evans
National Exposure Research Laboratory and National Risk Management Research Laboratory, Office of Research and Development, United States Environmental Protection Agency, 26 West Martin Luther King Drive, Cincinnati, Ohio 45268
2 shared publicationsJody A. Shoemaker
National Exposure Research Laboratory, National Risk Management Research Laboratory, United States Environmental Protection Agency, 26 West Martin Luther King Drive, Cincinnati, Ohio 45268
1 shared publicationLarry J. Wymer
National Exposure Research Laboratory and National Risk Management Research Laboratory, Office of Research and Development, United States Environmental Protection Agency, 26 West Martin Luther King Drive, Cincinnati, Ohio 45268
1 shared publication
Latest Publications
- 8 June 2001
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 73 (14) , 3358-3364
HPLC Determination of Cyanuric Acid in Swimming Pool Waters Using Phenyl and Confirmatory Porous Graphitic Carbon Columns
The chlorinated salts of cyanuric acid have found an important role in recreational swimming pool waters across the United States. Upon application to pool water, they can (1) release disinfectant chlorine or (2) stabilize the free available chlorine by acting as chlorine reservoirs in the form of cyanuric acid, preventing the photolytic destruction of residual chlorine by sunlight. Recommended levels of the cyanuric acid stabilizer are in the 10−100 mg/L concentration range according to the National Swimming Pool Foundation (San Antonio, TX). Two isocratic HPLC methods with UV detection (213 nm) employing phenyl and porous graphitic carbon (PGC) columns and phosphate buffer eluents (pH 6.7 and pH 9.1, respectively) were developed to accurately measure cyanuric acid in swimming pools. The two methods allowed fast separation and detection of the stabilizer in 4 (phenyl) and 8 (PGC) min. Both methods offered practical sensitivities with method detection limits of 0.07 (phenyl) and 0.02 mg/L (PGC). Neither one of the two methods required the use of sample cleanup cartridges. They exhibit chromatograms with excellent baseline stability enabling low-level quantitation. Most important, the PGC column had a useful lifetime of five months and 500 sample analyses/column. Eleven pool water samples were fortified with 4.8−50.0 mg/L stabilizer, and the average recovery was 99.8%. Finally, statistical analysis on the relative precisions of the two methods indicated equivalence at the 0.05 critical level.
- 8 June 2001
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 73 (14) , 3358-3364
HPLC Determination of Cyanuric Acid in Swimming Pool Waters Using Phenyl and Confirmatory Porous Graphitic Carbon Columns
The chlorinated salts of cyanuric acid have found an important role in recreational swimming pool waters across the United States. Upon application to pool water, they can (1) release disinfectant chlorine or (2) stabilize the free available chlorine by acting as chlorine reservoirs in the form of cyanuric acid, preventing the photolytic destruction of residual chlorine by sunlight. Recommended levels of the cyanuric acid stabilizer are in the 10−100 mg/L concentration range according to the National Swimming Pool Foundation (San Antonio, TX). Two isocratic HPLC methods with UV detection (213 nm) employing phenyl and porous graphitic carbon (PGC) columns and phosphate buffer eluents (pH 6.7 and pH 9.1, respectively) were developed to accurately measure cyanuric acid in swimming pools. The two methods allowed fast separation and detection of the stabilizer in 4 (phenyl) and 8 (PGC) min. Both methods offered practical sensitivities with method detection limits of 0.07 (phenyl) and 0.02 mg/L (PGC). Neither one of the two methods required the use of sample cleanup cartridges. They exhibit chromatograms with excellent baseline stability enabling low-level quantitation. Most important, the PGC column had a useful lifetime of five months and 500 sample analyses/column. Eleven pool water samples were fortified with 4.8−50.0 mg/L stabilizer, and the average recovery was 99.8%. Finally, statistical analysis on the relative precisions of the two methods indicated equivalence at the 0.05 critical level.
- 26 October 2000
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 72 (23) , 5820-5828
An HPLC Method with UV Detection, pH Control, and Reductive Ascorbic Acid for Cyanuric Acid Analysis in Water
Every year over 250 million pounds of cyanuric acid (CA) and chlorinated isocyanurates are produced industrially. These compounds are standard ingredients in formulations for household bleaches, industrial cleansers, dishwasher compounds, general sanitizers, and chlorine stabilizers. The method developed for CA using high-performance liquid chromatography (HPLC) with UV detection simplifies and optimizes certain parameters of previous methodologies by effective pH control of the eluent (95% phosphate buffer: 5% methanol, v/v) to the narrow pH range of 7.2−7.4. UV detection was set at the optimum wavelength of 213 nm where the cyanuric ion absorbs strongly. Analysis at the lower pH range of 6.8−7.1 proved inadequate due to CA keto−enol tautomerism, while at pHs of 7.4 proved more sensitive but their use was rejected because of CA elution at the chromatographic void volume and due to chemical interferences. The complex equilibria of chlorinated isocyanurates and associated species were suppressed by using reductive ascorbic acid to restrict the products to CA. UV, HPLC−UV, and electrospray ionization mass spectrometry techniques were combined to monitor the reactive chlorinated isocyanurates and to support the use of ascorbic acid. The resulting method is reproducible and measures CA in the 0.5−125 mg/L linear concentration range with a method detection limit of 0.05 mg/L in water.
- 26 October 2000
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 72 (23) , 5820-5828
An HPLC Method with UV Detection, pH Control, and Reductive Ascorbic Acid for Cyanuric Acid Analysis in Water
Every year over 250 million pounds of cyanuric acid (CA) and chlorinated isocyanurates are produced industrially. These compounds are standard ingredients in formulations for household bleaches, industrial cleansers, dishwasher compounds, general sanitizers, and chlorine stabilizers. The method developed for CA using high-performance liquid chromatography (HPLC) with UV detection simplifies and optimizes certain parameters of previous methodologies by effective pH control of the eluent (95% phosphate buffer: 5% methanol, v/v) to the narrow pH range of 7.2−7.4. UV detection was set at the optimum wavelength of 213 nm where the cyanuric ion absorbs strongly. Analysis at the lower pH range of 6.8−7.1 proved inadequate due to CA keto−enol tautomerism, while at pHs of 7.4 proved more sensitive but their use was rejected because of CA elution at the chromatographic void volume and due to chemical interferences. The complex equilibria of chlorinated isocyanurates and associated species were suppressed by using reductive ascorbic acid to restrict the products to CA. UV, HPLC−UV, and electrospray ionization mass spectrometry techniques were combined to monitor the reactive chlorinated isocyanurates and to support the use of ascorbic acid. The resulting method is reproducible and measures CA in the 0.5−125 mg/L linear concentration range with a method detection limit of 0.05 mg/L in water.