Martha Noro Chollom

Renewable energy sources such as biofuels play a critical role in climate change mitigation and in meeting the rising global energy demand. To achieve carbon neutrality, biofuels such as bioethanol, biodiesel and biogas are a promising solution because they are renewable. The use of biofuels has potential to significantly reduce reliance on fossil fuels and contribute to increased access to clean and affordable energy as envisioned in sustainable development goal 7 (SDG 7). However, their effective utilization is constrained by challenges in combustion kinetics, fuel property variability, and emission trade-offs arising from complex reaction pathways compared to conventional fuels. The present study provides a concise review of key aspects in combustion kinetics and mechanisms of bioethanol, biodiesel and biogas. Comparative analysis is provided to highlight inconsistencies in reported findings and limitations in current methodologies. The study proposes ways to address these challenges through combining fundamental research, computational modelling and experimental innovation to accelerate the transition toward a cleaner energy future.

Access to safe, clean drinking water is a critical challenge across many resource-constrained settings, especially in developing economies. Large-scale water treatment technologies are often available in urban areas, whereas such centralized systems are unavailable in rural and remote areas due to high infrastructure costs, rugged terrains, and maintenance challenges. To address this challenge, point-of-use (PoU) water treatment systems can fill this critical gap. This study critically evaluates the role low-cost PoU water treatment solutions play as a promising alternative to address water access and quality aspects in remote rural areas. The study explores the present state of global water sources, the challenges of water scarcity and pollution, and the limitations of existing large-scale treatment technologies. It highlights the motivation behind PoU systems and provides an in-depth analysis of various low-cost technologies, including operational principles, performance efficiency, and economic viability. Embedded in this study is a concise evaluation of the sustainability of these solutions in addressing water access and quality challenges in resource-limited regions. Finally, the study proposes solutions and perspectives on improving PoU systems and scale-up of the systems for large-scale applications to facilitate increased access to clean and safe water.

The anthropogenic deployment of plastic waste, especially petroleum-based plastics with toxic hydrocarbons, presents a significant environmental and health threat in sub-Saharan Africa (SSA). Herein, the high demand and rapid plastic production, coupled with improper disposal and inadequate waste management, have led to widespread contamination of air, water, and soil. Conventionally, plastic waste management, such as incineration and recycling, provides limited long-term solutions to this growing crisis. This necessitates urgent, sustainable, and eco-friendly remediation techniques to mitigate its far-reaching environmental implications. This comprehensive review focused on sustainable and eco-friendly techniques by exploring strengths, weaknesses, opportunities, and threats (SWOT) analysis of plastic waste management. Bioremediation techniques were found as potential solutions for addressing plastic waste in SSA. This paper examines advancements in physiochemical methods, the challenges in managing various plastic types, and the role of enzymatic and microbial consortia in enhancing biodegradation. It also explores the potential of genomic technologies and engineered microbial systems to convert plastic waste into valuable products, including bioenergy via bio-upcycling. These bioremediation strategies align with the United Nations Sustainable Development Goals (UN SDGs), offering a promising path to reduce the environmental and health impacts of plastic pollution in the region. This paper also considers future directions of integrating AI-powered recycling systems to facilitate the development of a circular economy in SSA. Additionally, this paper provides progress and future perspectives on bioremediation as a sustainable solution for plastic waste management in SSA.

Increased affordability, smaller footprint, and high permeability quality that meets stringent water quality standards have accelerated the uptake of membranes in water treatment. Moreover, low pressure, gravity-based microfiltration (MF) and ultrafiltration (UF) membranes eliminate the use of electricity and pumps. However, MF and UF processes remove contaminants by size exclusion, based on membrane pore size. This limits their application in the removal of smaller matter or even harmful microorganisms. There is a need to enhance the membrane properties to meet needs such as adequate disinfection, flux amelioration, and reduced membrane fouling. To achieve these, the incorporation of nanoparticles with unique properties in membranes has potential. Herein, we review recent developments in the impregnation of polymeric and ceramic microfiltration and ultrafiltration membranes with silver nanoparticles that are applied in water treatment. We critically evaluated the potential of these membranes in enhanced antifouling, increased permeability quality and flux compared to uncoated membranes. Despite the intensive research in this area, most studies have been performed at laboratory scale for short periods of time. There is a need for studies that assess the long-term stability of the nanoparticles and the impact on disinfection and antifouling performance. These challenges are addressed in this study and future directions.

The application of magnetic nanoparticles (MNPs) toward sustainable water economy and bioenergy production has become a subject of great interest. Anaerobic digestion (AD) has been widely exploited in wastewater treatment settings, whereby utilization of MNP additives by microorganism response for degradation of organics into biogas is seen to be eco-friendly and economically viable. The present study investigated the impact of two synthesized MNPs such as aluminum ferrite (AlFe₂O₄) and magnesium ferrite (MgFe₂O₄) on biogas production via biochemical methane potential (BMP) tests. A BMP set-up of three (3) bioreactors was tested with a working volume of 0.8 L which comprises 0.5 L wastewater (WW) and 0.3 L activated sludge (AS) with 1.5 g of the MNPs and a control system without MNPs. The degradation of chemical oxygen demand (COD) was increased with set-ups that contained MNPs as compared to the control system, MgFe₂O₄ (93.96%) > AlFe₂O₄ (85.95%) > control (68.83%). In terms of biogas production, the methane yield was also recorded as MgFe₂O₄ (85.7%) > AlFe₂O₄ (84.3%) > control (65.7%). The physical and chemical stability of MNPs makes them more advantageous for application in biogas production. In the prospects of biogas enhancement and biodegradability, integrating MNPs in an anaerobic digestion system will result in a more efficient anaerobic process performance for biogas production.

The inappropriate use and indiscriminate disposal of antibiotics has become a menace worldwide. The incomplete removal of these contaminants from wastewater treatment plants has also contributed to this. This study presents the biodegradation of two veterinary antibiotics; ciprofloxacin (CIP) and enrofloxacin (ENRO). Kinetics models were explored to understand the dynamics of biodegradation in an anaerobic digestion process. This was carried out in batch reactors under various operating conditions: pH, organic loading rate (OLR), and antibiotic concentration. The influence of the parameters was investigated using a response surface methodology (RSM) based on the Box–Behnken experimental design of 15 runs. The data obtained were fitted on a polynomial function model. OLR and pH exhibited a synergistic and antagonistic effect in the response models developed, with a high correlation regression coefficient (R²; 0.9834–0.9875) close to 1 at a 95% confidence level. The optimum conditions obtained from the RSM numerical optimization were pH (6), OLR (2 kgCOD·m⁻³·days⁻¹), and an antibiotic concentration of 75%, which gave the removal of CIP, ENRO, and COD, respectively, as 80%, 83%, and 73% at a desirability function of 85%. The kinetics study shows that the biodegradation of antibiotics was well fitted on a first-order model (R²; 0.9885–0.9978) with rate constants ranging from 0.0695 to 0.96 days⁻¹.

Wastewater as a substrate potential for producing renewable energy in the form of biogas is gaining global attention. Herein, nanomaterials can be utilised as a nutrient source for microorganisms for anaerobic digestion activity. Therefore, this study explored the impact of seven different magnetic nanomaterials (MNMs) on the anaerobic digestion of wastewater via biochemical methane potential (BMP) tests for biogas production. The BMP assay was carried out with eight bioreactors, where each was charged with 50% wastewater and 30% activated sludge, leaving a headspace of 20%. Aside the control bioreactor, the other seven (7) bioreactors were dosed with 1.5 g of MNMs. This was operated under anaerobic conditions at a mesophilic temperature of 35 °C for 31 days. At the degree of 80% degradation of contaminants, the results that showed bioreactors charged with 1.5 g MNMs of TiO₂ photocatalyst composites were more effective than those constituting metallic composites, whereas the control achieved 65% degradation. Additionally, the bioreactor with magnetite (Fe₃O₄) produced the highest cumulative biogas of 1172 mL/day. Kinetically, the modified Gompertz model favoured the cumulative biogas data obtained with a significant regression coefficient (R²) close to one.

In this study, the principle of sustaining circular economy is presented as a way of recovering valuable resources from wastewater and utilizing its energy potential via anaerobic digestion (AD) of municipality wastewater. Biostimulation of the AD process was investigated to improve its treatability efficiency, biogas production, and kinetic stability. Addressing this together with agricultural waste such as eggshells (CE), banana peel (PB), and calcined banana peels (BI) were employed and compared to magnetite (Fe₃O₄) as biostimulation additives via 1 L biochemical methane potential tests. With a working volume of 0.8 L (charge with inoculum to substrate ratio of 3:5 v/v) and 1.5 g of the additives, each bioreactor was operated at a mesophilic temperature of 40 °C for 30 days while being compared to a control bioreactor. Scanning electron microscopy and energy dispersive X-ray (SEM/EDX) analysis was used to reveal the absorbent’s morphology at high magnification of 10 kx and surface pore size of 20.8 µm. The results showed over 70% biodegradation efficiency in removing the organic contaminants (chemical oxygen demand, color, and turbidity) as well as enhancing the biogas production. Among the setups, the bioreactor with Fe₃O₄ additives was found to be the most efficient, with an average daily biogas production of 40 mL/day and a cumulative yield of 1117 mL/day. The kinetic dynamics were evaluated with the cumulative biogas produced by each bioreactor via the first order modified Gompertz and Chen and Hashimoto kinetic models. The modified Gompertz model was found to be the most reliable, with good predictability.