Armandas Balčytis

Harnessing non-spatial properties of photons as if they represent an additional independent coordinate underpins the emerging synthetic dimension approach. It enables probing of higher-dimensional physical models within low-dimensional devices, such as on a planar chip where this method is relatively nascent. We demonstrate an integrated thin-film lithium niobate ring resonator that, under dynamic modulation, simulates a tight-binding model with its discrete frequency modes representing lattice sites. Inter-mode coupling, and the simulated lattice geometry, can be reconfigured by controlling the modulating signals. Up to a quasi-3D lattice connectivity with controllable gauge potentials has been achieved by simultaneous synchronized nearest-, second- and third-nearest-neighbor coupling, and verified by acquiring synthetic band structures. Development of synthetic frequency dimension devices in the thin-film lithium niobate photonic integration platform is a key step in increasing the complexity of topological models achievable on a chip, combining efficient electro-optic mode coupling with non-linear effects for long-range mode interactions.

Harnessing non-spatial properties of photons as if they represent an additional independent coordinate underpins the emerging synthetic dimension approach. It enables probing of higher-dimensional physical models within low-dimensional devices, such as on a planar chip. We demonstrate an integrated thin-film lithium niobate ring resonator that, under dynamic modulation, simulates a tight-binding model with its discrete frequency modes representing lattice sites. Inter-mode coupling, and the simulated lattice geometry, can be reconfigured by controlling the modulating signals. Up to a quasi-3D lattice connectivity with controllable gauge potentials has been achieved by simultaneous synchronized nearest-, second- and third-nearest-neighbor coupling, and verified by acquiring time-resolved synthetic band structures. Development of synthetic frequency dimension devices in the thin-film lithium niobate photonic integration platform is a key step in increasing the complexity of topological models achievable on a chip, combining efficient electro-optic mode coupling response with non-linear effects for long-range mode interactions.

We created a modulator-equipped thin-film lithium niobate integrated ring resonator simulating a synthetic frequency dimension tight-binding model. It produces frequency states spaced over a 600 GHz bandwidth. Reconfigurable coupling enables simulation of disparate two-dimensional interactions.

Synthetic dimensions, which simulate spatial coordinates using nonspatial degrees of freedom, are drawing interest in topological science and other fields for modeling higher-dimensional phenomena on simple structures. We present the first realization of a synthetic frequency dimension on a silicon ring resonator integrated photonic device fabricated using a CMOS process. We confirm that its coupled modes correspond to a one-dimensional tight-binding model through acquisition of up to 280-GHz bandwidth optical frequency comb-like spectra and by measuring synthetic band structures. Furthermore, we realized two types of gauge potentials along the frequency dimension and probed their effects through the associated band structures. An electric field analog was produced via modulation detuning, whereas effective magnetic fields were induced using synchronized nearest- and second nearest–neighbor couplings. Creation of coupled mode lattices and two effective forces on a monolithic Si CMOS device represents a key step toward wider adoption of topological principles.

We present a dynamically modulated ring resonator on a Si CMOS platform, hosting a synthetic dimension lattice over 180 GHz. The frequency and time domain synthetic band structure was acquired and photonic transport phenomena were explored.

A hydrogen sensor based on plasmonic metasurfaces is demonstrated to exhibit the industry-required 10 s reaction time and sensitivity. It consists of a layer of either Y or WO₃ sandwiched between a top Pd nanodisk and a Au mirror at the base. The phase change layer (Y, WO₃) reacts with hydrogen, and the corresponding change of the refractive index (permittivity) is detected by the spectral shift of the resonance dip in reflectance at the IR spectral window. This direct reflectance readout of the permittivity change due to hydrogen uptake is fast and is facilitated by radiation field enhancement extending into the phase change volume. Numerical modeling was used to elucidate the effects that real and imaginary parts of the refractive index exert on the spectral shifts of resonance. The mechanism of sensor performance is outlined, and a possibility to tune its spectral range of operation by the diameter of the Pd nanodisk and thickness of the phase change material makes this design applicable to other molecular detection applications including surface-enhanced IR absorption.

Anisotropy of absorbance (dichroism) and birefringence limits spatial resolution, sensitivity during quantitative detection of trace analytes, as well as spectral imaging in the near-IR and mid-IR spectral ranges. Here we show hyperspectral imaging capable of determining retardance and absorbance due to small changes in the real and imaginary parts of the refractive index ∼Δn and ∼Δκ at each single point of a measurement at diffraction limited resolution. This single-beam technique allows the retrieval of the phase and amplitude information by virtue of a twice different angular dependence of Δn and Δκ on the sample orientation angle. It has potential applications in analytical science, multi-dimensional optical memory devices, and forensic/defense/sensor fields.

Thermo-optical properties of the nanodisc and metal hole array plasmonic perfect absorber (PPA) metasurfaces were designed and characterized at mid-infrared wavelengths. Both, radiation emitter and detector systems operating in various spectral domains are highly sought after for a diverse range of applications, one example being future sensor networks employed in the internet-of-things. Reciprocity of the absorbance and emittance is shown experimentally, i.e., the PPAs are demonstrated to follow Kirchhoff’s law where the patterns exhibiting a strong optical absorption were found to be effective thermal emitters. Hence, the Kirchhoff’s law is experimentally validated for the metasurfaces in the IR spectral domain where there is a lack of solutions for spectrally narrow-band emitters. The highest efficiency of radiation-to-heat and heat-to-radiation conversion was obtained for Au-Si-Au composite structures.