Radianta Triatmadja
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Radianta Triatmadja has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
Nur Yuwono
Civil and Environmental Engineering Departement Universitas Gadjah Mada Yogyakarta Indonesia
3 shared publications- Djoko Legono
Universitas Gadjah Mada
2 shared publications Fatchan Nurrochmad
Civil and Environmental Engineering Department, Universitas Gadjah Mada, Yogyakarta, Indonesia
2 shared publicationsIntan Supraba
Civil and Environmental Engineering Department, Universitas Gadjah Mada, Yogyakarta, Indonesia
2 shared publications- Intan Supraba
Universitas Gadjah Mada
2 shared publications Ahmad Riadi
Civil and Environmental Engineering Departement Universitas Gadjah Mada Yogyakarta Indonesia
1 shared publication
Latest Publications
- 24 December 2024
- Published by Springer Nature
- p. 115-124
A Study of Clean Water Supply After Earthquake at Lombok Utara Regency, Indonesia
- 24 December 2024
- Published by Springer Nature
- p. 115-124
A Study of Clean Water Supply After Earthquake at Lombok Utara Regency, Indonesia
- 24 December 2024
- Published by Springer Nature
- p. 145-153
A Quick Method to Determine Tank Capacity in the Pipe Network Due to Daily Fluctuation of Domestic Water Demand
- 24 December 2024
- Published by Springer Nature
- p. 145-153
A Quick Method to Determine Tank Capacity in the Pipe Network Due to Daily Fluctuation of Domestic Water Demand
- Open Access
- 1 January 2024
- Published by International Digital Organization for Scientific Information (IDOSI) in International Journal of Engineering
- Vol. 37 (7) , 1252-1262
Leaching Potential and Effectiveness of Pervious Mortar Filters in Bacteria and Turbidity Removal from Surface Water
A pervious mortar filter (PMF) is a modification of pervious mortar and pervious concrete designed as a water filter that, based on its physical characteristics, can reduce turbidity and bacteria. However, chemically, it contains minerals that can dissolve upon contact with water and be found in effluent. This study aimed to determine the performance of PMF in treating surface water by reducing turbidity and Escherichia coli and to assess its leaching potential. PMF specimens were created by mixing sand (0.6–0.85 mm), cement, and water with sand-to-cement ratios (M) of 4 and 5 and a water-to-cement ratio (w/c) of 0.4. Each mixture was then molded into pipes with a diameter of 8.2 cm and different thicknesses: 3, 5, and 10 cm. Raw surface water was used for the performance and leaching tests. Results showed that PMF effectively removed 95% turbidity and 99.71% E. coli, which increased with the filtration duration. PMF reduced E. coli more effectively when designed with a thickness of 10 cm than 5 or 3 cm because it would provide more surface areas for suspended solids and bacteria to attach and be retained. More substantial increases (mean %) of pH, hardness, calcium ions, and TDS were observed in PMF M4 with a thickness of 10 cm than in thinner ones because it contained more cement that would dissolve when in contact with water.
- 1 January 2024
- Published by International Digital Organization for Scientific Information (IDOSI) in International Journal of Engineering
- Vol. 37 (7) , 1252-1262
Open AccessLeaching Potential and Effectiveness of Pervious Mortar Filters in Bacteria and Turbidity Removal from Surface Water
A pervious mortar filter (PMF) is a modification of pervious mortar and pervious concrete designed as a water filter that, based on its physical characteristics, can reduce turbidity and bacteria. However, chemically, it contains minerals that can dissolve upon contact with water and be found in effluent. This study aimed to determine the performance of PMF in treating surface water by reducing turbidity and Escherichia coli and to assess its leaching potential. PMF specimens were created by mixing sand (0.6–0.85 mm), cement, and water with sand-to-cement ratios (M) of 4 and 5 and a water-to-cement ratio (w/c) of 0.4. Each mixture was then molded into pipes with a diameter of 8.2 cm and different thicknesses: 3, 5, and 10 cm. Raw surface water was used for the performance and leaching tests. Results showed that PMF effectively removed 95% turbidity and 99.71% E. coli, which increased with the filtration duration. PMF reduced E. coli more effectively when designed with a thickness of 10 cm than 5 or 3 cm because it would provide more surface areas for suspended solids and bacteria to attach and be retained. More substantial increases (mean %) of pH, hardness, calcium ions, and TDS were observed in PMF M4 with a thickness of 10 cm than in thinner ones because it contained more cement that would dissolve when in contact with water.
- Open Access
- 1 January 2023
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Journal of Applied Engineering Science
- Vol. 21 (4) , 1083-1093
Permeability coefficient of pervious cement mortar measured by the constant head and falling head methods
The modified previous concrete and cement mortar, known as previous cement mortar (PCM), is designed with a specific composition to create pores. The coarse aggregate is removed to form smaller pore sizes. PCM acts as a water filter, needing higher permeability than cement mortar but less than previous concrete. Its pores drain water while trapping impurities. This study compares the effects of sand-to-cement ratio (S/C), specimen thickness, and age on permeability and porosity. It also contrasts PCM's permeability coefficient determined by constant head and falling head methods. Numerous studies compare permeability coefficients in previous concrete using these methods, but not for finer aggregate cement-based composite materials like previous cement mortar. PCM uses fine aggregate (0.6-0.85 mm) at 3, 5, and 10 cm thickness with S/C ratios of 4 and 5. Findings show that S/C 5 specimens have significantly higher porosity than S/C 4. The S/C ratios notably impact permeability; the higher ratio means the higher permeability. Permeability coefficients for S/C 4 ranging from 0.006-0.075 cm/s, while S/C 5 ranging from 0.010 to 0.147 cm/s. The relationship between the permeability coefficient between the constant head and falling head methods at the age of 90 days specimen are Kc = 1.0516 Kf (S/C 4.2) and Kc = 0.9325 Kf (S/C 5.2). According to these findings, finer aggregates result in a significantly smaller permeability, to the extent that the constant head method is more reliable compared to the falling head method.
- 1 January 2023
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Journal of Applied Engineering Science
- Vol. 21 (4) , 1083-1093
Open AccessPermeability coefficient of pervious cement mortar measured by the constant head and falling head methods
The modified previous concrete and cement mortar, known as previous cement mortar (PCM), is designed with a specific composition to create pores. The coarse aggregate is removed to form smaller pore sizes. PCM acts as a water filter, needing higher permeability than cement mortar but less than previous concrete. Its pores drain water while trapping impurities. This study compares the effects of sand-to-cement ratio (S/C), specimen thickness, and age on permeability and porosity. It also contrasts PCM's permeability coefficient determined by constant head and falling head methods. Numerous studies compare permeability coefficients in previous concrete using these methods, but not for finer aggregate cement-based composite materials like previous cement mortar. PCM uses fine aggregate (0.6-0.85 mm) at 3, 5, and 10 cm thickness with S/C ratios of 4 and 5. Findings show that S/C 5 specimens have significantly higher porosity than S/C 4. The S/C ratios notably impact permeability; the higher ratio means the higher permeability. Permeability coefficients for S/C 4 ranging from 0.006-0.075 cm/s, while S/C 5 ranging from 0.010 to 0.147 cm/s. The relationship between the permeability coefficient between the constant head and falling head methods at the age of 90 days specimen are Kc = 1.0516 Kf (S/C 4.2) and Kc = 0.9325 Kf (S/C 5.2). According to these findings, finer aggregates result in a significantly smaller permeability, to the extent that the constant head method is more reliable compared to the falling head method.
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2846 (1)
Rehabilitation priority of irrigation infrastructure in west colo irrigation area using multiple attribute decision making
Damage to the irrigation network will result in the uneven fulfillment of the need for irrigation water in an irrigation area (IA). In order to prevent damage to irrigation networks from reaching fatalities, it is necessary to perform rehabilitation. When the available funds are not sufficient to rehabilitate all irrigation networks in all Irrigation Areas, it is necessary to conduct a priority analysis. Rehabilitation of irrigation networks is an activity to restore the function and condition of irrigation networks in accordance with the initial planning. The Multi Attribute Decision Making (MADM) methods can be applied to determine rehabilitation priorities. Priority analysis of irrigation network rehabilitation can be performed based on valid ministerial regulations by considering irrigation network infrastructure (primary and secondary), water availability, irrigation area, and land productivity. The MADM methods applied are Simple Additive Weighting Method (SAW), Weighted Product (WP), and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS). The results of the analysis of the rehabilitation priorities for 14 IA show that the SAW and WP methods have almost the same pattern, namely the resulting ranking has a very strong relationship with the area of IA. This shows that the regulations are merely created only to focus on the area of IA without considering other aspects (irrigation network infrastructure, water availability and crop yields). The TOPSIS method can be used as a reference in determining rehabilitation priorities based on the laws and regulations that are made and not only focusing at the area of IA.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2846 (1)
Open AccessRehabilitation priority of irrigation infrastructure in west colo irrigation area using multiple attribute decision making
Damage to the irrigation network will result in the uneven fulfillment of the need for irrigation water in an irrigation area (IA). In order to prevent damage to irrigation networks from reaching fatalities, it is necessary to perform rehabilitation. When the available funds are not sufficient to rehabilitate all irrigation networks in all Irrigation Areas, it is necessary to conduct a priority analysis. Rehabilitation of irrigation networks is an activity to restore the function and condition of irrigation networks in accordance with the initial planning. The Multi Attribute Decision Making (MADM) methods can be applied to determine rehabilitation priorities. Priority analysis of irrigation network rehabilitation can be performed based on valid ministerial regulations by considering irrigation network infrastructure (primary and secondary), water availability, irrigation area, and land productivity. The MADM methods applied are Simple Additive Weighting Method (SAW), Weighted Product (WP), and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS). The results of the analysis of the rehabilitation priorities for 14 IA show that the SAW and WP methods have almost the same pattern, namely the resulting ranking has a very strong relationship with the area of IA. This shows that the regulations are merely created only to focus on the area of IA without considering other aspects (irrigation network infrastructure, water availability and crop yields). The TOPSIS method can be used as a reference in determining rehabilitation priorities based on the laws and regulations that are made and not only focusing at the area of IA.
- Open Access
- 28 December 2022
- Published by Atlantis Press SARL
- p. 172-178
Study of Total Suspended Solids (TSS) Distribution and Salinity of Coastal Area Using Satellite Imagery for Pond Development in Pond Irrigation Areas (DIT) Sei Teras
- 28 December 2022
- Published by Atlantis Press SARL
- p. 172-178
Open AccessStudy of Total Suspended Solids (TSS) Distribution and Salinity of Coastal Area Using Satellite Imagery for Pond Development in Pond Irrigation Areas (DIT) Sei Teras
- Open Access
- 19 May 2020
- Published by Universitas Gadjah Mada in Journal of the Civil Engineering Forum
- Vol. 6 (1) , 115-122
Sustaining Water-Related Heritage Infrastructures as Part of An Integrated Water Resource Management Program
The history of the water resources development in the world is generally inspired by the physical, climate and socioenvironment conditions such as geographical, culture and civilization at the local level. For many years, humans have spent tremendous efforts and time improving the quality of life through adequate water utilization. This research, therefore, aims to analyze the ancient water-related infrastructures as cultural heritages in creating a functional and adequate design. Data were obtained from the Mataram Canal in Yogyakarta Province which was selected due to the success story and various benefits associated with the Indonesian history of water resources in Central Java provinces. Today, some places along the canal have become tourist destinations, and it is more popular in Yogyakarta due to its architectural history. However, the diversification of water utilization in fishery ponds along the canal and the shift in land utilization from rice field to housings, and government buildings may undermine the function of the canal. The factual condition associated with the periodic decrease in irrigation command does not make the Mataram Canal useless. Therefore, efforts to maintain its function through restoration, and revitalization, can enhance water supply for irrigation and other purposes such as fish ponds and, pollutant dilution. The Strength-Weakness-Opportunity-Threat (SWOT) method with some key performance indicators was adopted to access the necessity of the sustainability program of the Mataram Canal as the heritage infrastructure. Some key performance indicators related to Integrated Water Resources Management (IWRM) program in Indonesia were introduced and utilized to prioritize the necessary actions. The results showed that the SWOT analysis promotes various actions to support the IWRM-related program of Mataram Canal. Furthermore, the implementation of the promoted actions would contribute to the longer sustainability of the Mataram Canal.
- 19 May 2020
- Published by Universitas Gadjah Mada in Journal of the Civil Engineering Forum
- Vol. 6 (1) , 115-122
Open AccessSustaining Water-Related Heritage Infrastructures as Part of An Integrated Water Resource Management Program
The history of the water resources development in the world is generally inspired by the physical, climate and socioenvironment conditions such as geographical, culture and civilization at the local level. For many years, humans have spent tremendous efforts and time improving the quality of life through adequate water utilization. This research, therefore, aims to analyze the ancient water-related infrastructures as cultural heritages in creating a functional and adequate design. Data were obtained from the Mataram Canal in Yogyakarta Province which was selected due to the success story and various benefits associated with the Indonesian history of water resources in Central Java provinces. Today, some places along the canal have become tourist destinations, and it is more popular in Yogyakarta due to its architectural history. However, the diversification of water utilization in fishery ponds along the canal and the shift in land utilization from rice field to housings, and government buildings may undermine the function of the canal. The factual condition associated with the periodic decrease in irrigation command does not make the Mataram Canal useless. Therefore, efforts to maintain its function through restoration, and revitalization, can enhance water supply for irrigation and other purposes such as fish ponds and, pollutant dilution. The Strength-Weakness-Opportunity-Threat (SWOT) method with some key performance indicators was adopted to access the necessity of the sustainability program of the Mataram Canal as the heritage infrastructure. Some key performance indicators related to Integrated Water Resources Management (IWRM) program in Indonesia were introduced and utilized to prioritize the necessary actions. The results showed that the SWOT analysis promotes various actions to support the IWRM-related program of Mataram Canal. Furthermore, the implementation of the promoted actions would contribute to the longer sustainability of the Mataram Canal.
- Open Access
- 1 February 2020
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 426 (1)
The performance of low crested breakwaters as a sand trap for shore protection
The low crested breakwater (LCB) is considered as a new coastal protective structure which has not been widely used compared to other coastal protection structures. LCB has more advantages than conventional ones such as breakwaters, requiring lower cost and aesthetically not disturbing nature because of its position which is below sea level so it is suitable for beach tourism. Studies on low crested breakwaters are mostly about the ability to absorb energy waves and how beach responded to the structure. However, the study on the ability of this low crested breakwater such as a sand trip is still limited. Therefore, this study aims to observe the breakwater’s performance as a sand trap for shore protection and the effect of the parameters on the performance. This study was conducted on the plexiglass wave made with a length of 18 m, a width of 0.3 m and a depth of 0.45 m. Wave parameters (height and period) and structure parameters (height and width) were employed as a reference in this study. This research was conducted by varying the waves, height and water depth. The results indicate that the number of transport sediment tends to be increased following the wave height (Hi), the water depth at the height of the structure (Rc) and reduced wavelength (L). The type and position of a wave breaking also affect the amount of transport sediment.
- 1 February 2020
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 426 (1)
Open AccessThe performance of low crested breakwaters as a sand trap for shore protection
The low crested breakwater (LCB) is considered as a new coastal protective structure which has not been widely used compared to other coastal protection structures. LCB has more advantages than conventional ones such as breakwaters, requiring lower cost and aesthetically not disturbing nature because of its position which is below sea level so it is suitable for beach tourism. Studies on low crested breakwaters are mostly about the ability to absorb energy waves and how beach responded to the structure. However, the study on the ability of this low crested breakwater such as a sand trip is still limited. Therefore, this study aims to observe the breakwater’s performance as a sand trap for shore protection and the effect of the parameters on the performance. This study was conducted on the plexiglass wave made with a length of 18 m, a width of 0.3 m and a depth of 0.45 m. Wave parameters (height and period) and structure parameters (height and width) were employed as a reference in this study. This research was conducted by varying the waves, height and water depth. The results indicate that the number of transport sediment tends to be increased following the wave height (Hi), the water depth at the height of the structure (Rc) and reduced wavelength (L). The type and position of a wave breaking also affect the amount of transport sediment.
- Open Access
- 1 February 2020
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 426 (1)
The impact of earthquake on clean water demand and supply at North Lombok regency, Indonesia
An earthquake of magnitude 6.4 Mw hit Lombok, Indonesia in July 2018, followed by another 6.9 Mw earthquake magnitude in less than a month in August 2018. The earthquake caused fatalities and damage to infrastructures, including the facilities of clean water. The main objective of this study is to know the impact of the earthquake towards clean water facilities damage, and to analyse clean water demand and supply after earthquakes in North Lombok Regency. Another purpose is to propose disaster mitigation to be implemented in the other disaster prone regions of Indonesia. The primary data were collected through field survey and questionnaire samples of 110 respondents. Secondary data regarding the damage of clean water network were collected from the Regional Water Company (PDAM) of North Lombok. The results of this study show that many clean water facilities were damaged due to earthquake. The amount of clean water demand in Lombok Island after the earthquake was decreased by 19.03%. The number of wells users after the earthquake increased from 22.73% to 57.27%. The potential groundwater for clean water in the Lombok Island is more than sufficient to fulfil the requirement of clean water during disaster. However, further studies are required to realize such idea.
- 1 February 2020
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 426 (1)
Open AccessThe impact of earthquake on clean water demand and supply at North Lombok regency, Indonesia
An earthquake of magnitude 6.4 Mw hit Lombok, Indonesia in July 2018, followed by another 6.9 Mw earthquake magnitude in less than a month in August 2018. The earthquake caused fatalities and damage to infrastructures, including the facilities of clean water. The main objective of this study is to know the impact of the earthquake towards clean water facilities damage, and to analyse clean water demand and supply after earthquakes in North Lombok Regency. Another purpose is to propose disaster mitigation to be implemented in the other disaster prone regions of Indonesia. The primary data were collected through field survey and questionnaire samples of 110 respondents. Secondary data regarding the damage of clean water network were collected from the Regional Water Company (PDAM) of North Lombok. The results of this study show that many clean water facilities were damaged due to earthquake. The amount of clean water demand in Lombok Island after the earthquake was decreased by 19.03%. The number of wells users after the earthquake increased from 22.73% to 57.27%. The potential groundwater for clean water in the Lombok Island is more than sufficient to fulfil the requirement of clean water during disaster. However, further studies are required to realize such idea.
- 1 September 2019
- Published by Academic World Research in Journal of Applied Fluid Mechanics
- Vol. 12 (5) , 1395-1406
The Use of Dam Break Model to Simulate Tsunami Run-up and Scouring Around a Vertical Cylinder
- 1 September 2019
- Published by Academic World Research in Journal of Applied Fluid Mechanics
- Vol. 12 (5) , 1395-1406
The Use of Dam Break Model to Simulate Tsunami Run-up and Scouring Around a Vertical Cylinder