Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Aleksei V. Sosunov has a total of 83 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Oxygen-Plasma-Activated Lithium Niobate: Surface Structure, Chemical Composition and Tunable Proton Diffusion Properties

    by Dmitriy Masalkin, Igor V. Petukhov, Andrei Kozlov, Anton Kulikov, Aleksei V. Sosunov

    Controlling the surface state of ferroelectric lithium niobate (LN) is relevant to adsorption, catalysis, ion transport, and tunable optoelectronics. X- and Z-cut congruent LN crystals were activated by oxygen plasma at low pressure. Surface composition, electron-density profiles, structure, proton transport, and optical response were studied by XPS, XRR, infrared spectroscopy, XRD, and prism coupling method; plasma properties were estimated theoretically. At low pressure, the oxygen plasma colour changes (white to yellow), which is due to reduced concentration of neutral oxygen from theoretical calculation. The accompanying increases in ion mean free path and energy agreed with the observed change in plasma emission. At the lowest neutral oxygen atoms concentration, the surface [Nb]/[O] ratio decreased, while pronounced electron-density minima indicates Nb-deficient, structurally disordered, partially amorphized near-surface layer. Nb-deficiency layer leads to increasing of proton diffusion coefficient and decreasing of proton concentration. The crystallographic orientation of LN was found to influence both the plasma-induced surface modification and the subsequent proton diffusion rate. This enables to form low-contrast diffuse waveguides by direct proton exchange with less strained phases and increasing depth. Thus, neutral oxygen atoms concentration links oxygen plasma kinetics to surface chemistry and proton transport it gives opportunities for tunable photonics and optoelectronics.

  • Open Access

    Annealed proton-exchange waveguides in mixed lithium niobate-tantalate solid solutions: Defect structure and optical losses

    by A. V. Sosunov, A. R. Kornilicyn, A. S. Pankov, R. S. Ponomarev, D. N. Moskalev, E. D. Voblikov, A. A. Mololkin, R. R. Fakhrtdinov, E. D. Savelyev, A. R. Akhmatkhanov, et al.

    New optical materials are one of the drivers of the development of integrated and nonlinear photonics. In this paper, we study the prospects for using mixed crystals of X and Z-cut lithium niobate-tantalate (LNT) solid solution for the manufacturing of optical waveguides by the annealed proton exchange (APE) method. We have evaluated the defectiveness of the LNT samples by means of scanning electron microscopy visualization and optical profilometry after wet chemical etching and by X-ray diffraction analysis. The studies showed that the LNT structure has pores with a depth up to 60[ ]nm and surface density of 2 pcs/mm[ ]. Also, it was established that LNT crystals possess a higher density of etch pits or dislocations regardless of the crystallographic orientation as compared to conventional lithium niobate. We determined the geometric parameters of single-mode channel APE waveguides by OptiBPM simulation. We experimentally measured the optical losses of channel APE waveguides by the fiber-to-fiber method. The optical losses were 6.2[ ]dB (Z-cut) and 19.0[ ]dB (X-cut), which is two times higher than those for APE LN under the same conditions. This effect was related to surface and bulk defects of LNT crystals. The study highlights the relationship between structural and optical characteristics of APE LNT waveguides and contributes to the further study and development of mixed LNT crystals as a material platform for photonics and optics.

  • Enhanced optical properties of fused silica glass at high temperature cristobalite modification

    by K.N. Generalova, A.V. Fofanov, A.S. Burdina, I.V. Ryaposov, A.V. Bulatova, L.N. Malinina, A.V. Sosunov


  • Open Access

    High-Stable Electric Field Integrated Optical Sensor Based on Reduced Lithium Niobate

    by Aleksei Sosunov, Artem Shipitsin, Mikhail Zhitkov, Anton Kuznetsov, Andrey Kosberg, Anton Zhuravlev, Andrey Lutsenko, Victor Krishtop, Anatoliy Mololkin

    Integrated optical devices based on lithium niobate (LN) are pivotal in modern navigation systems, telecommunications, and sensing technologies. However, their practical implementation is critically limited by temperature-dependent and long-term operational instability, primarily attributed to the pyroelectric effect inherent in LN. This study addresses this challenge by investigating thermally reduced lithium niobate as a material platform to enhance the stability of integrated optical circuits, with a focus on integrated optical electric field sensors (IOES). We present the fabrication and comprehensive characterization of an IOES based on a Michelson interferometer design. Key performance metrics including optical loss, free spectral range, electro-optical sensitivity, and optical path difference were systematically evaluated. Notably, under normal climatic conditions, the optical path difference of the IOES demonstrated exceptional stability when subjected to an applied voltage ranging from 0 to 5 V, with no observable drift over time. Calibration of the IOES revealed a predominantly linear response, although a third-degree polynomial model provided a more precise fit to the experimental data. The minimum relative error achieved during calibration was 0.47%, underscoring the high accuracy of the device. Our results establish thermally reduced LN as a promising material platform for next-generation integrated optical devices. By mitigating the pyroelectric effect, this approach enables significant improvements in the long-term stability of IOES and other LN-based photonic components. These findings open avenues for the reliable deployment of integrated optical systems in demanding applications where environmental stability is paramount.


  • On the Nature of Transport Phenomena during Proton Exchange Technological Process

    by V. A. Demin, M. I. Petukhov, A. V. Sosunov, A. B. Volyntsev

    Extremely complex transfer processes characterize the technology of waveguides production by proton exchange method in the lithium niobate single crystal. The melt of benzoic acid C6H5COOH, which acts as a source of protons, is used most often as a working fluid. Proton exchange occurs because of dissociative absorption of protons into the crystal, accompanied by the extrusion of lithium ions back into the working fluid. Electrokinetic transport phenomena in the melt of benzoic acid are fundamentally different from diffusion processes in the crystal, however, these processes are interrelated. However, the dynamics of crystal protonation is of greatest interest to technologists, which is why, historically, the first calculations were made for proton exchange process, as a result of which optical waveguides are formed in it. Experimental data reliably show that the concentration front of protons in the volume of the crystal moves in dependence on time according to the approximately square root law and has a sharp, practically stepped profile. It is even more surprising that the so-called nonlinear diffusion equation is the most efficient for describing the penetration of protons deep into the crystal. It is obtained from a more general quasi-linear second order diffusion equation in the consequence of assumption about a power dependence of the diffusion coefficient on the concentration. The difference from classical diffusion is expressed by the stepped nature of the profile and means the finite speed of disturbance propagation in the system.

  • Method for determining the parameters of gradient proton-exchanged waveguides in single crystals and solid solutions

    by Aleksei V. Sosunov, Maksim I. Petukhov, Anatoliy A. Mololkin, Rashid R. Fakhrtdinov, Evgeniy D. Savel’EV, Vladimir Ya. Shur

    Subject of study. The determination of the parameters of gradient waveguides required for the fabrication of integrated optical circuits with low optical losses is presented. Aim of study . This work aims to develop a new approach for determining all key parameters of gradient proton-exchanged waveguides in single crystals and solid solutions. Method . Confocal Raman microscopy, the prism coupling method, and a numerical solution of the classical transport equation are used to reconstruct gradient waveguide profiles. Main results. Gradient profiles of proton-exchanged waveguides formed in lithium niobate crystals and lithium niobate–tantalate solid solutions of X - and Z -cuts are reconstructed by measuring the OH-group line in the Raman spectrum. The reconstructed profiles are in good agreement with those obtained by the prism coupling method and diffusion theory, enabling accurate determination of the waveguide layer depth. The refractive index increment is determined from a calibration curve calculated in this work that establishes the relationship between the Raman scattering intensity in the OH-group region and the refractive index increment. This approach allows the estimation of all the main parameters of proton-exchanged waveguides at any point, which is not achievable using conventional methods. Practical significance. The results can be applied for the rapid nondestructive characterization of gradient proton-exchanged waveguides in integrated photonics devices.

  • Метод компенсации дрейфа рабочей точки модулятора Маха-Цендера с помощью электрической схемы на основе терморезисторов

    by А.ю. Киреев, А.а. Журавлев, А.в. Сосунов

    Модуляторы Маха-­Цендера на основе объемного или тонкопленочного ниобата лития являются ключевыми компонентами сетей передачи данных, включая квантовые коммуникации. Однако проблема дрейфа рабочей точки по-прежнему актуальна. Ранее было продемонстрировано множество методов компенсации дрейфа рабочей точки для решения различных технических задач. В данной работе мы предлагаем аналоговую электрическую схему термокомпенсации дрейфа рабочей точки с использованием терморезисторов. Мы демонстрируем сначала настройку электрической схемы от температуры, а затем экспериментально подтверждаем эффективность этого метода, получая максимальное отклонение от средней оптической мощности не более 1,0 дБ или 1,0 В, приложенного постоянного напряжения при температуре до 45 °C. Предложенный подход не требует дополнительного источника питания и может быть использован для специальных задач в удаленных локациях.

  • Proton‐Exchange Waveguides in Lithium Niobate: State of the Art and Applications

    by Aleksei V. Sosunov, Vitaliy A. Demin, Ekaterina V. Miasnikova, Dmitriy N. Masalkin, Andrey R. Kornilicyn, Mariana K. Kuneva, Andrey R. Akhmatkhanov, Vladimir Ya. Shur

    Proton exchange is one of the widely used methods for manufacturing optical waveguides in lithium niobate by partial replacement of Li + ions by protons H + , from an organic liquid source. Proton exchange allows the creation of stable low‐contrast buried waveguides with Δ n e ≈ 0.02 for navigation systems, telecommunications, sensors, nonlinear optics, and quantum technologies. New approaches to proton exchange under high vacuum open up the possibility for creating high‐contrast optical waveguides with Δ n e ≈ 0.1. Proton exchange can be used to modify the surface of lithium niobate and other ferroelectric crystals, to produce microfluidic chips, to study domain kinetics, as well as to form ridge optical waveguides in thin films, mixed, and doped single crystals. This review presents the physical principles and applications of proton exchange technology with postannealing, soft proton exchange, vapor‐phase proton exchange, high‐vacuum proton exchange, and reverse proton exchange. The prospects of proton exchange technology are also presented in conclusion.


  • Reflection of the Stripe Domains in Lithium Niobate Crystal Modified by Soft Proton Exchange

    by Evgeniy Savelyev, Anton Turygin, Andrey Akhmatkhanov, Aleksei Sosunov, Andrey Kornilicyn, Vladimir Shur

    Herein, the results of studying the reflection of stripe domains growing during polarization reversal in congruent lithium niobate single crystals modified by soft proton exchange are presented. The in situ optical imaging reveals the stripe domains with growth directions along three equivalent Y crystallographic axes. When the growing domain approaches the standing one, its growth direction changes by 120° to another Y axis. A strong difference of reflection on opposite polar surfaces is revealed: at the Z+ surface it occurs at lower distances through two successive 60° direction changes, while at the Z− it occurs at higher distances by four successive 30° direction changes. The obtained field dependence of reflection distance is attributed to the influence of the partially screened depolarization field in the vicinity of the standing domain. The fitting of experimental data allows to extract the screening efficiency for stripe domain growth. The lower value of reflection distance on the Z + polar surface is attributed to the higher conductivity of head‐to‐head domain walls as compared to tail‐to‐tail ones. The results obtained are important for the further development of domain engineering methods.

  • Oxygen Plasma Surface‐Activated Lithium Niobate for Controlling Protons Diffusion Rate

    by Aleksei V. Sosunov, Igor V. Petukhov, Andrei A. Kozlov, Dmitriy N. Masalkin, Andrey Kornilicyn, Anna G. Sheremet, Mariana Kuneva

    Lithium niobate (LN) is one of the key materials in modern instrument engineering. Currently, photonic devices based on thin films have great potential for use. That is why the role of the surfaces in technological operations strongly increases. Herein, the powerful effect of modifying the surface of LN in oxygen plasma at low pressures on the diffusion coefficient of hydrogen ions is demonstrated. Plasma activation of LN surface leads to changes in chemical composition, found by X‐Ray photoelectron spectroscopy (XPS), Raman, and IR spectroscopy methods that the part of niobium relative to oxygen on the surface of LN decreases. During proton exchange (PE), the deformations of the crystal lattice and the change of refractive index are sharply reduced. No surface damage of LN is observed at direct PE. For the first time, it is possible to form an intermediate phase at low PE temperatures and without annealing. This was previously considered impossible. An explanation is proposed for the adsorption of benzoic acid on the surface of lithium niobate. This effect can be used in ridge waveguides and diffuse optical waveguide technology, nonlinear optical applications, and lab on chip.