Dinu Atodiresei
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Dinu Atodiresei has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Catalin Popa
Department for Naval Port Engineering and Management, Faculty of Navigation and Naval Management, Romanian Naval Academy “Mircea cel Batran”, 900218 Constanta, Romania
4 shared publications Florin Nicolae
2 shared publications- Vasile Dobref
Romanian Naval Academy “Mircea cel Batran”, 1st Fulgerului Street, 900213 Constanta, Romania
2 shared publications A. Cotorcea
“Mircea cel Batran” Naval Academy, Constanta, Romania
1 shared publicationAdrian Aldea
1 shared publication- Alecu Toma
Department of Navigation and Naval Transport, Faculty of Navigation and Naval Management, Naval Academy “Mircea cel Batran”, Fulgerului 1, 900218 Constanta, Romania
1 shared publication
Latest Publications
- Open Access
Port Performance and Its Influence on Vessel Operating Costs and Emissions
Background: Port congestion contributes significantly to operational inefficiency and environmental impact in maritime logistics. With tightening EU regulations such as the Emissions Trading System (EU ETS) and FuelEU Maritime, understanding and mitigating the economic and environmental effects of vessel delays is increasingly critical. This study focuses on a single bulk cargo pier at Constanta Port (Romania), which has experienced substantial traffic fluctuations since 2021, and examines operational and environmental performance through a queuing-theoretic lens. Methods: The authors have applied an M/G/1/∞/FIFO/∞ queuing model to vessel traffic and service time data from 2021–2023, supplemented by Monte Carlo simulations to capture variability in maneuvering and service durations. Environmental impact was quantified in CO2 emissions using standard fuel-based emission factors, and a Cold Ironing scenario was modeled to assess potential mitigation benefits. Economic implications were estimated through operational cost modeling and conversion of CO2 emissions into equivalent EU ETS carbon costs. Results: The analysis revealed high berth utilization rates across all years, with substantial variability in waiting times and queue lengths. Congestion was associated with considerable CO2 emissions, which, when expressed in monetary terms under prevailing EU ETS prices, represent a significant financial burden. The Cold Ironing scenario demonstrated a substantial reduction in at-berth emissions and corresponding cost savings, underscoring its potential as a viable mitigation strategy. Conclusions: Results confirm that operational congestion at the studied berth imposes substantial environmental and financial burdens. The analysis supports targeted interventions such as Just-In-Time arrivals, optimized berth scheduling, and Cold Ironing adoption. Recommendations are most applicable to single-berth bulk cargo operations; future research should extend the approach to multi-berth configurations and incorporate additional operational constraints for broader generalizability.
Open AccessPort Performance and Its Influence on Vessel Operating Costs and Emissions
Background: Port congestion contributes significantly to operational inefficiency and environmental impact in maritime logistics. With tightening EU regulations such as the Emissions Trading System (EU ETS) and FuelEU Maritime, understanding and mitigating the economic and environmental effects of vessel delays is increasingly critical. This study focuses on a single bulk cargo pier at Constanta Port (Romania), which has experienced substantial traffic fluctuations since 2021, and examines operational and environmental performance through a queuing-theoretic lens. Methods: The authors have applied an M/G/1/∞/FIFO/∞ queuing model to vessel traffic and service time data from 2021–2023, supplemented by Monte Carlo simulations to capture variability in maneuvering and service durations. Environmental impact was quantified in CO2 emissions using standard fuel-based emission factors, and a Cold Ironing scenario was modeled to assess potential mitigation benefits. Economic implications were estimated through operational cost modeling and conversion of CO2 emissions into equivalent EU ETS carbon costs. Results: The analysis revealed high berth utilization rates across all years, with substantial variability in waiting times and queue lengths. Congestion was associated with considerable CO2 emissions, which, when expressed in monetary terms under prevailing EU ETS prices, represent a significant financial burden. The Cold Ironing scenario demonstrated a substantial reduction in at-berth emissions and corresponding cost savings, underscoring its potential as a viable mitigation strategy. Conclusions: Results confirm that operational congestion at the studied berth imposes substantial environmental and financial burdens. The analysis supports targeted interventions such as Just-In-Time arrivals, optimized berth scheduling, and Cold Ironing adoption. Recommendations are most applicable to single-berth bulk cargo operations; future research should extend the approach to multi-berth configurations and incorporate additional operational constraints for broader generalizability.
- Open Access
Risk-Based Optimization of Multimodal Oil Product Operations Through Simulation and Workflow Modeling
Background: The transportation of petroleum products via multimodal logistics systems is a complex process subject to operational inefficiencies and elevated risk exposure. The efficient and resilient transportation of petroleum products increasingly depends on multimodal logistics systems, where operational risks and process inefficiencies can significantly impact safety and performance. This study addresses the research question of how an integrated risk-based and workflow-driven approach can enhance the management of oil products logistics in complex port environments. Methods: A dual methodological framework was applied at the Port of Midia, Romania, combining a probabilistic risk assessment model, quantifying incident probability, infrastructure vulnerability, and exposure, with dynamic business process modeling (BPM) using specialized software. The workflow simulation replicated real-world multimodal oil operations across maritime, rail, road, and inland waterway segments. Results: The analysis identified human error, technical malfunctions, and environmental hazards as key risk factors, with an aggregated major incident probability of 2.39%. BPM simulation highlighted critical bottlenecks in customs processing, inland waterway lock transit, and road tanker dispatch. Process optimizations based on simulation insights achieved a 25% reduction in operational delays. Conclusions: Integrating risk assessment with dynamic workflow modeling provides an effective methodology for improving the resilience, efficiency, and regulatory compliance of multimodal oil logistics operations. This approach offers practical guidance for port operators and contributes to advancing risk-informed logistics management in the petroleum supply chain.
Open AccessRisk-Based Optimization of Multimodal Oil Product Operations Through Simulation and Workflow Modeling
Background: The transportation of petroleum products via multimodal logistics systems is a complex process subject to operational inefficiencies and elevated risk exposure. The efficient and resilient transportation of petroleum products increasingly depends on multimodal logistics systems, where operational risks and process inefficiencies can significantly impact safety and performance. This study addresses the research question of how an integrated risk-based and workflow-driven approach can enhance the management of oil products logistics in complex port environments. Methods: A dual methodological framework was applied at the Port of Midia, Romania, combining a probabilistic risk assessment model, quantifying incident probability, infrastructure vulnerability, and exposure, with dynamic business process modeling (BPM) using specialized software. The workflow simulation replicated real-world multimodal oil operations across maritime, rail, road, and inland waterway segments. Results: The analysis identified human error, technical malfunctions, and environmental hazards as key risk factors, with an aggregated major incident probability of 2.39%. BPM simulation highlighted critical bottlenecks in customs processing, inland waterway lock transit, and road tanker dispatch. Process optimizations based on simulation insights achieved a 25% reduction in operational delays. Conclusions: Integrating risk assessment with dynamic workflow modeling provides an effective methodology for improving the resilience, efficiency, and regulatory compliance of multimodal oil logistics operations. This approach offers practical guidance for port operators and contributes to advancing risk-informed logistics management in the petroleum supply chain.
- Open Access
- 22 April 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (9) , 3770
Simulating Oil Spill Evolution and Environmental Impact with Specialized Software: A Case Study for the Black Sea
Oil spills represent a significant environmental hazard, particularly in marine ecosystems, where their impacts extend to coastal infrastructure, biodiversity, and economic activities. This study utilizes GNOME v.47.2 (General NOAA Operational Modeling Environment) and ADIOS2 v.2.10.2 (Automated Data Inquiry for Oil Spills) to simulate and analyze oil spill dynamics in the Romanian sector of the Black Sea, focusing on trajectory prediction, hydrocarbon weathering, and shoreline contamination risk assessment. The research explores multiple spill scenarios involving different hydrocarbon types (light vs. heavy oils), vessel dynamics, and real-time environmental variables (wind, currents, temperature). The findings reveal that lighter hydrocarbons (e.g., gasoline, aviation fuel) tend to evaporate quickly, while heavier fractions (e.g., crude oil, fuel oil #6) persist in the marine environment and pose a higher risk of coastal pollution. In the first case study, a spill of 10,000 metric tons of medium oil (Arabian Medium EXXON) was simulated using GNOME v.47.2, showing that after 22 h, the slick reached the shoreline. Under forecasted hydro-meteorological conditions, 27% evaporated, 1% dispersed, and 72% remained for mechanical or chemical intervention. In the second simulation, 10,000 metric tons of gasoline were released, and within 6 h, 98% evaporated, with only minor residues reaching the shore. A real-world validation case was also conducted using the December 2024 Kerch Strait oil spill incident, where the model accurately predicted the early arrival of light fractions and delayed coastal contamination by fuel oil carried by subsurface currents. These results emphasize the need for future research focused on the vertical dispersion dynamics of heavier hydrocarbon fractions.
- 22 April 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (9) , 3770
Open AccessSimulating Oil Spill Evolution and Environmental Impact with Specialized Software: A Case Study for the Black Sea
Oil spills represent a significant environmental hazard, particularly in marine ecosystems, where their impacts extend to coastal infrastructure, biodiversity, and economic activities. This study utilizes GNOME v.47.2 (General NOAA Operational Modeling Environment) and ADIOS2 v.2.10.2 (Automated Data Inquiry for Oil Spills) to simulate and analyze oil spill dynamics in the Romanian sector of the Black Sea, focusing on trajectory prediction, hydrocarbon weathering, and shoreline contamination risk assessment. The research explores multiple spill scenarios involving different hydrocarbon types (light vs. heavy oils), vessel dynamics, and real-time environmental variables (wind, currents, temperature). The findings reveal that lighter hydrocarbons (e.g., gasoline, aviation fuel) tend to evaporate quickly, while heavier fractions (e.g., crude oil, fuel oil #6) persist in the marine environment and pose a higher risk of coastal pollution. In the first case study, a spill of 10,000 metric tons of medium oil (Arabian Medium EXXON) was simulated using GNOME v.47.2, showing that after 22 h, the slick reached the shoreline. Under forecasted hydro-meteorological conditions, 27% evaporated, 1% dispersed, and 72% remained for mechanical or chemical intervention. In the second simulation, 10,000 metric tons of gasoline were released, and within 6 h, 98% evaporated, with only minor residues reaching the shore. A real-world validation case was also conducted using the December 2024 Kerch Strait oil spill incident, where the model accurately predicted the early arrival of light fractions and delayed coastal contamination by fuel oil carried by subsurface currents. These results emphasize the need for future research focused on the vertical dispersion dynamics of heavier hydrocarbon fractions.
- Open Access
- 21 April 2025
- Published by MDPI AG in Environments
- Vol. 12 (4) , 132
Solutions for Modelling the Marine Oil Spill Drift
Oil spills represent a critical environmental hazard with far-reaching ecological and economic consequences, necessitating the development of sophisticated modelling approaches to predict, monitor, and mitigate their impacts. This study presents a computationally efficient and physically grounded modelling framework for simulating oil spill drift in marine environments, developed using Python coding. The proposed model integrates core physical processes—advection, diffusion, and degradation—within a simplified partial differential equation system, employing an integrator for numerical simulation. Building on recent advances in marine pollution modelling, the study incorporates real-time oceanographic data, satellite-based remote sensing, and subsurface dispersion dynamics into an enriched version of the simulation. The research is structured in two phases: (1) the development of a minimalist Python model to validate fundamental oil transport behaviours, and (2) the implementation of a comprehensive, multi-layered simulation that includes NOAA ocean currents, 3D vertical mixing, and support for inland and chemical spill modelling. The results confirm the model’s ability to reproduce realistic oil spill trajectories, diffusion patterns, and biodegradation effects under variable environmental conditions. The proposed framework demonstrates strong potential for real-time decision support in oil spill response, coastal protection, and environmental policy-making. This paperwork contributes to the field by bridging theoretical modelling with practical response needs, offering a scalable and adaptable tool for marine pollution forecasting. Future extensions may incorporate deep learning algorithms and high-resolution sensor data to further enhance predictive accuracy and operational readiness.
- 21 April 2025
- Published by MDPI AG in Environments
- Vol. 12 (4) , 132
Open AccessSolutions for Modelling the Marine Oil Spill Drift
Oil spills represent a critical environmental hazard with far-reaching ecological and economic consequences, necessitating the development of sophisticated modelling approaches to predict, monitor, and mitigate their impacts. This study presents a computationally efficient and physically grounded modelling framework for simulating oil spill drift in marine environments, developed using Python coding. The proposed model integrates core physical processes—advection, diffusion, and degradation—within a simplified partial differential equation system, employing an integrator for numerical simulation. Building on recent advances in marine pollution modelling, the study incorporates real-time oceanographic data, satellite-based remote sensing, and subsurface dispersion dynamics into an enriched version of the simulation. The research is structured in two phases: (1) the development of a minimalist Python model to validate fundamental oil transport behaviours, and (2) the implementation of a comprehensive, multi-layered simulation that includes NOAA ocean currents, 3D vertical mixing, and support for inland and chemical spill modelling. The results confirm the model’s ability to reproduce realistic oil spill trajectories, diffusion patterns, and biodegradation effects under variable environmental conditions. The proposed framework demonstrates strong potential for real-time decision support in oil spill response, coastal protection, and environmental policy-making. This paperwork contributes to the field by bridging theoretical modelling with practical response needs, offering a scalable and adaptable tool for marine pollution forecasting. Future extensions may incorporate deep learning algorithms and high-resolution sensor data to further enhance predictive accuracy and operational readiness.
- 15 June 2016
- Published by Mircea cel Batran Naval Academy in Scientific Bulletin of Naval Academy
- Vol. 19 (1) , 17-26
MODELLING OF HYDRO-METEOROLOGICAL PARAMETERS USING SPOS SOFTWARE IN ORDER TO OPTIMIZE NAVIGATIONAL ROUTES
- 15 June 2016
- Published by Mircea cel Batran Naval Academy in Scientific Bulletin of Naval Academy
- Vol. 19 (1) , 17-26
MODELLING OF HYDRO-METEOROLOGICAL PARAMETERS USING SPOS SOFTWARE IN ORDER TO OPTIMIZE NAVIGATIONAL ROUTES
- Open Access
- 1 June 2016
- Published by Walter de Gruyter GmbH in International conference KNOWLEDGE-BASED ORGANIZATION
- Vol. 22 (1) , 215-219
Human Reliability Using the Fault Tree Analysis. A Case Study of a Military Accident Investigation
- 1 June 2016
- Published by Walter de Gruyter GmbH in International conference KNOWLEDGE-BASED ORGANIZATION
- Vol. 22 (1) , 215-219
Open AccessHuman Reliability Using the Fault Tree Analysis. A Case Study of a Military Accident Investigation
- Open Access
- 1 June 2016
- Published by Walter de Gruyter GmbH in International conference KNOWLEDGE-BASED ORGANIZATION
- Vol. 22 (3) , 584-590
Fast Meteorological Forecasting Method for Chemical Spill in Black Sea
The Romanian Navy missions and actions in Black Sea can lead to ecological risks and the forecast of spill direction based on real data from NOOA. There is an increase in strategic importance of the Black Sea region and the protection of Romanian coastline is a very important task. Chemical spill can now be analyzed with a fast method, called Gnome and predictions can be used with higher accuracy. Forecasts can be used in port protection against offshore spill and as military source of high value information related to Black Sea.
- 1 June 2016
- Published by Walter de Gruyter GmbH in International conference KNOWLEDGE-BASED ORGANIZATION
- Vol. 22 (3) , 584-590
Open AccessFast Meteorological Forecasting Method for Chemical Spill in Black Sea
The Romanian Navy missions and actions in Black Sea can lead to ecological risks and the forecast of spill direction based on real data from NOOA. There is an increase in strategic importance of the Black Sea region and the protection of Romanian coastline is a very important task. Chemical spill can now be analyzed with a fast method, called Gnome and predictions can be used with higher accuracy. Forecasts can be used in port protection against offshore spill and as military source of high value information related to Black Sea.