Arun Prasath Ramaswamy
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Arun Prasath Ramaswamy has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Krishna Kumar Jaiswal
Pondicherry University
3 shared publications Ramaswamy Murugan
High Energy Density Batteries Research Laboratory, Department of Physics, Pondicherry University, Puducherry 605014, India
3 shared publicationsS. Sudhakar
Laboratory for Energy Materials and Sustainability Centre for Green Energy Technology Pondicherry University, R. V. Nagar, Kalapet, Puducherry 605014 India
3 shared publicationsThamayanthi Panneerselvam
High Energy Density Batteries Research Laboratory, Department of Physics, Pondicherry University, Puducherry 605014, India
3 shared publications- Dhavalkumar N. Joshi
Pondicherry University
2 shared publications Pandurangan Swathi
Laboratory for Energy Materials and Sustainability, Department of Green Energy Technologies, Pondicherry University, Puducherry 605014, India
2 shared publications
Latest Publications
- 20 July 2026
- Published by Taylor & Francis in Biofuels
- Vol. 17 (10) , 2018-2031
Tuning the acidity of pyridinium-based ionic liquid catalysts for enhanced biodiesel production using oleic acid: a DFT study
The escalating dependence on fossil fuels for energy, which still accounts for approximately 75% of the world’s primary energy demand, has accelerated the rise in atmospheric CO2 concentrations, le...
- 20 July 2026
- Published by Taylor & Francis in Biofuels
- Vol. 17 (10) , 2018-2031
Tuning the acidity of pyridinium-based ionic liquid catalysts for enhanced biodiesel production using oleic acid: a DFT study
The escalating dependence on fossil fuels for energy, which still accounts for approximately 75% of the world’s primary energy demand, has accelerated the rise in atmospheric CO2 concentrations, le...
- Open Access
- 11 October 2024
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 11, 1457325
Submicron-scale Au-decorated TiO2 mesoporous spheres for enhanced photon harvesting in DSSCs through near-field enhancement, light scattering, and dye loading
Light harvesting materials are crucial for capturing the sunlight in a device such as a solar cell for better efficiency. In this study, we developed high surface area, submicron-sized TiO2 spheres (MTS) incorporated with anisotropic Au nanoparticles (Au_MTS) to create highly light-absorbing photoanodes for enhanced dye-sensitized solar cell (DSSC) efficiency. The high surface area of MTS (∼125 m2/g) allows for increased dye-loading, while their submicron size (150–300 nm) provides superior light-scattering capabilities for significantly enhancing the photoanode’s light absorption. Furthermore, incorporating of anisotropic Au nanoparticles enables broadband surface plasmon resonance (SPR) coupling, synergistically boosting photon harvesting in the Au_MTS photoanodes. The interconnected tiny TiO2 nanoparticle network in MTS supports charge carrier generation and transport, providing ample sites for dye adsorption and efficient electron pathways. Au_MTS with varying amounts of Au nanoparticles synthesized by a greener microwave-assisted synthesis method and DSSC devices were fabricated and compared with devices made from pristine MTS and P25 nanoparticles. The optimal Au_MTS device, containing ∼1.3 wt% Au nanoparticles, achieved a maximum power conversion efficiency (PCE) of ∼7.7%, representing improvements of ∼40% and ∼60% over pristine MTS (PCE of ∼5.2%) and P25 nanoparticles (PCE of ∼4.71%), respectively. Overall, this work demonstrates the effectiveness of plasmonic mesoporous photoanodes in enhancing DSSC performance through improved photo response, light scattering, and dye loading.
- 11 October 2024
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 11, 1457325
Open AccessSubmicron-scale Au-decorated TiO2 mesoporous spheres for enhanced photon harvesting in DSSCs through near-field enhancement, light scattering, and dye loading
Light harvesting materials are crucial for capturing the sunlight in a device such as a solar cell for better efficiency. In this study, we developed high surface area, submicron-sized TiO2 spheres (MTS) incorporated with anisotropic Au nanoparticles (Au_MTS) to create highly light-absorbing photoanodes for enhanced dye-sensitized solar cell (DSSC) efficiency. The high surface area of MTS (∼125 m2/g) allows for increased dye-loading, while their submicron size (150–300 nm) provides superior light-scattering capabilities for significantly enhancing the photoanode’s light absorption. Furthermore, incorporating of anisotropic Au nanoparticles enables broadband surface plasmon resonance (SPR) coupling, synergistically boosting photon harvesting in the Au_MTS photoanodes. The interconnected tiny TiO2 nanoparticle network in MTS supports charge carrier generation and transport, providing ample sites for dye adsorption and efficient electron pathways. Au_MTS with varying amounts of Au nanoparticles synthesized by a greener microwave-assisted synthesis method and DSSC devices were fabricated and compared with devices made from pristine MTS and P25 nanoparticles. The optimal Au_MTS device, containing ∼1.3 wt% Au nanoparticles, achieved a maximum power conversion efficiency (PCE) of ∼7.7%, representing improvements of ∼40% and ∼60% over pristine MTS (PCE of ∼5.2%) and P25 nanoparticles (PCE of ∼4.71%), respectively. Overall, this work demonstrates the effectiveness of plasmonic mesoporous photoanodes in enhancing DSSC performance through improved photo response, light scattering, and dye loading.
- Top Cited PapersOpen Access
- 4 May 2024
- Published by Springer Nature in Discover Applied Sciences
- Vol. 6 (5) , 1-24
Hydrothermal liquefaction of wet microalgal biomass for biofuels and platform chemicals: advances and future prospects
Recent advances in hydrothermal liquefaction (HTL) have established this biomass conversion technology as a potent tool for the effective valorization and energy densification of varied feedstocks, ranging from lignocelluloses to microalgae and organic wastes. Emphasizing its application across biomass types, this exploration delves into the evolving landscape of HTL. Microalgae, recognized as a promising feedstock, offer a rich source of biomolecules, including lipids, carbohydrates, and proteins, making them particularly attractive for biofuel production. The comprehensive review explores the biofuel products and platform chemicals obtained through HTL of microalgae, delving into biodiesel production, bio-oil composition, characteristics, and to produce high-valued by-products. Challenges and limitations, such as reactor design, scalability issues, and the impact of microalgal composition on yields, are critically analyzed. The future prospects and research directions section envision advancements in HTL technology, integration with biorefinery processes, and the exploration of hybrid approaches for enhanced biofuel production. Overall, the paper emphasizes the promising potential of HTL for wet microalgal biomass and underscores the need for continued research to overcome existing challenges and unlock further opportunities in sustainable biofuel and platform chemical production.
- 4 May 2024
- Published by Springer Nature in Discover Applied Sciences
- Vol. 6 (5) , 1-24
Top Cited PapersOpen AccessHydrothermal liquefaction of wet microalgal biomass for biofuels and platform chemicals: advances and future prospects
Recent advances in hydrothermal liquefaction (HTL) have established this biomass conversion technology as a potent tool for the effective valorization and energy densification of varied feedstocks, ranging from lignocelluloses to microalgae and organic wastes. Emphasizing its application across biomass types, this exploration delves into the evolving landscape of HTL. Microalgae, recognized as a promising feedstock, offer a rich source of biomolecules, including lipids, carbohydrates, and proteins, making them particularly attractive for biofuel production. The comprehensive review explores the biofuel products and platform chemicals obtained through HTL of microalgae, delving into biodiesel production, bio-oil composition, characteristics, and to produce high-valued by-products. Challenges and limitations, such as reactor design, scalability issues, and the impact of microalgal composition on yields, are critically analyzed. The future prospects and research directions section envision advancements in HTL technology, integration with biorefinery processes, and the exploration of hybrid approaches for enhanced biofuel production. Overall, the paper emphasizes the promising potential of HTL for wet microalgal biomass and underscores the need for continued research to overcome existing challenges and unlock further opportunities in sustainable biofuel and platform chemical production.
- 29 March 2023
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 37 (8) , 6186-6196
Cross-Linked Polymer Composite Electrolyte Incorporated with Waste Seashell Based Nanofiller for Lithium Metal Batteries
- 29 March 2023
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 37 (8) , 6186-6196
Cross-Linked Polymer Composite Electrolyte Incorporated with Waste Seashell Based Nanofiller for Lithium Metal Batteries
- 28 September 2021
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 41 (2) , e13767
Performance of roof‐cool paints prepared using organic acrylic polymer binder and inorganic additives for the thermal reduction in buildings
- 28 September 2021
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 41 (2) , e13767
Performance of roof‐cool paints prepared using organic acrylic polymer binder and inorganic additives for the thermal reduction in buildings
- 1 September 2021
- Published by Elsevier in Materials Today Energy
- Vol. 21
Polymer-garnet composite electrolyte based on comb-like structured polymer for lithium-metal batteries
- 1 September 2021
- Published by Elsevier in Materials Today Energy
- Vol. 21
Polymer-garnet composite electrolyte based on comb-like structured polymer for lithium-metal batteries
- Open Access
- 1 January 2021
- Published by Elsevier in SSRN Electronic Journal
Led Photobioreactor Integrated with Fish Aquarium Wastewater for the Growth and Enhancement of Lipids in Microalgae Biomass for Biodiesel Production
This research has investigates the implication of fish aquarium wastewater (FAW) as a potential nutrient supplement in the LED photobioreactor (blue, red, and blue-red combined illumination) for the growth and lipid enhancement in microalgae biomass. The concentration of FAW >50 % blended with the standard culture media (Walne’s/BG-11 media) has improved the biomass growth in microalgae. The high lipid-containing microalgae N. salina cultivation in blue LED photobioreactor integrated with FAW has enhanced the lipid content ~40 % dcw. The N. salina lipid was used to produce biodiesel via enzymatic transesterification. The conversion of lipids into FAMEs was confirmed by FTIR and 1H-NMR spectroscopy. GC-MS has confirmed the presence of the main components of FAMEs in NSL-biodiesel. This study shows the use of FAW as an efficient nutrient supplement for microalgae growth and LED photobioreactor for lipid enhancement in microalgae biomass for sustainable biodiesel production.
- 1 January 2021
- Published by Elsevier in SSRN Electronic Journal
Open AccessLed Photobioreactor Integrated with Fish Aquarium Wastewater for the Growth and Enhancement of Lipids in Microalgae Biomass for Biodiesel Production
This research has investigates the implication of fish aquarium wastewater (FAW) as a potential nutrient supplement in the LED photobioreactor (blue, red, and blue-red combined illumination) for the growth and lipid enhancement in microalgae biomass. The concentration of FAW >50 % blended with the standard culture media (Walne’s/BG-11 media) has improved the biomass growth in microalgae. The high lipid-containing microalgae N. salina cultivation in blue LED photobioreactor integrated with FAW has enhanced the lipid content ~40 % dcw. The N. salina lipid was used to produce biodiesel via enzymatic transesterification. The conversion of lipids into FAMEs was confirmed by FTIR and 1H-NMR spectroscopy. GC-MS has confirmed the presence of the main components of FAMEs in NSL-biodiesel. This study shows the use of FAW as an efficient nutrient supplement for microalgae growth and LED photobioreactor for lipid enhancement in microalgae biomass for sustainable biodiesel production.
- 2 September 2020
- Published by Taylor & Francis in Inorganic and Nano-Metal Chemistry
- Vol. 51 (7) , 995-1004
Bio-waste chicken eggshell-derived calcium oxide for photocatalytic application in methylene blue dye degradation under natural sunlight irradiation
The development of nontoxic bio-waste based catalyst for efficient recycling of textile dye wastewater to potable water is paramount to support a sustainable environment. This research work investigated a crystallographic evolution of CaO from the chicken eggshell wastes via a simple calcination process for the photocatalytic degradation of the methylene blue dye. The physicochemical properties of the activated CaO catalyst were studied using characterization techniques such as X-ray diffraction (XRD), Raman spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, ultraviolet-visible (UV-Vis) spectroscopy, and scanning electron microscope (SEM). The crystallite size was estimated as ∼55 nm for the prepared CaO. The sharp bands at 358 cm−1 and the broad band at 675 cm−1 in the Raman spectroscopic analysis have revealed a function attributed to the Ca–O bonds. The energy band gap of prepared CaO was calculated by the Tauc equation using the UV-visible reflectance spectrum. The estimated energy band gap has a maximum value of 5.54 eV. However, a lower bandgap 2.27 eV was also estimated. SEM micrograph revealed the multi-arm/angular and rod-shaped microstructure with a width of 1–2 µm of the arm. The ring-shaped appearance encouraged the porous behavior of the prepared CaO. The photocatalytic activity of the prepared CaO was performed for the degradation of the methylene blue dye in distilled water under natural sunlight in the ambient environment. The maximum photocatalytic degradation efficiency was observed as ∼ 98% in 180 min. The research work incites the possible realistic application of bio-waste based inexpensive photocatalysts for textile/industrial wastewater remediation.
- 2 September 2020
- Published by Taylor & Francis in Inorganic and Nano-Metal Chemistry
- Vol. 51 (7) , 995-1004
Bio-waste chicken eggshell-derived calcium oxide for photocatalytic application in methylene blue dye degradation under natural sunlight irradiation
The development of nontoxic bio-waste based catalyst for efficient recycling of textile dye wastewater to potable water is paramount to support a sustainable environment. This research work investigated a crystallographic evolution of CaO from the chicken eggshell wastes via a simple calcination process for the photocatalytic degradation of the methylene blue dye. The physicochemical properties of the activated CaO catalyst were studied using characterization techniques such as X-ray diffraction (XRD), Raman spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, ultraviolet-visible (UV-Vis) spectroscopy, and scanning electron microscope (SEM). The crystallite size was estimated as ∼55 nm for the prepared CaO. The sharp bands at 358 cm−1 and the broad band at 675 cm−1 in the Raman spectroscopic analysis have revealed a function attributed to the Ca–O bonds. The energy band gap of prepared CaO was calculated by the Tauc equation using the UV-visible reflectance spectrum. The estimated energy band gap has a maximum value of 5.54 eV. However, a lower bandgap 2.27 eV was also estimated. SEM micrograph revealed the multi-arm/angular and rod-shaped microstructure with a width of 1–2 µm of the arm. The ring-shaped appearance encouraged the porous behavior of the prepared CaO. The photocatalytic activity of the prepared CaO was performed for the degradation of the methylene blue dye in distilled water under natural sunlight in the ambient environment. The maximum photocatalytic degradation efficiency was observed as ∼ 98% in 180 min. The research work incites the possible realistic application of bio-waste based inexpensive photocatalysts for textile/industrial wastewater remediation.