Jin Zheng
Jin Zheng has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Xianyuan Du
State Key Laboratory of Petroleum Pollution Control, Beijing 102206, China
2 shared publications - Baichun Wu
State Key Laboratory of Petroleum Pollution Control, Beijing 102206, China
1 shared publication - Diannan Lu
Tsinghua University
1 shared publication - Fei Chai
School of Chemistry and Chemical Engineering, Shanghai University of Engineering Science, Shanghai 201620, China
1 shared publication - Hongkun Chen
State Key Laboratory of Petroleum Pollution Control, Beijing 102206, China
1 shared publication Huijun Wu
State Key Laboratory of Petroleum Pollution Control, China National Petroleum Corporation Research Institute of Safety & Environment Technology
1 shared publication
Latest Publications
- Open Access
- 28 October 2026
- Published by Frontiers Media SA in Frontiers in Plant Science
- Vol. 17, 1942632
Nitrogen addition determines whether invasive plant-derived biochar facilitates or suppresses Flaveria bidentis invasion
Invasive plant-derived biochar offers a promising strategy for converting invasive biomass into valuable soil amendments. However, its effects on plant invasion under increasing nitrogen deposition remain uncertain. Here, we established coastal saline–alkaline wetland microcosms containing native plant communities invaded by Flaveria bidentis. We evaluated biochars derived from two invasive plants, Amaranthus palmeri (AP) and Spartina alterniflora (SA), applied at 1%, 3%, and 5% (w/w), with or without nitrogen addition. We quantified invasive plant performance, native community responses, invasibility, invasion resistance, niche characteristics, and phylogenetic structure. Biochar effects were strongly dependent on feedstock, application rate, and nitrogen availability. In the absence of nitrogen addition, applying AP-biochar or SA-biochar at either 3% or 5% increased the relative invasion risk by enhancing the performance of Flaveria bidentis and weakening the resistance of the native community. Nitrogen addition altered these outcomes but did not consistently suppress relative invasion. AP-biochar with nitrogen generally reduced invasive plant dominance and enhanced community resistance. The 3% AP-biochar + nitrogen most effectively suppressed F. bidentis growth, whereas 5% AP-biochar + nitrogen maximized invasion resistance and diversity recovery. In contrast, 1% and 3% SA-biochar + nitrogen frequently promoted Flaveria bidentis , while 5% SA-biochar showed limited suppression. These findings reveal that the ecological effects of invasive plant-derived biochar depend on feedstock, application rate, and nitrogen availability. Careful feedstock selection and rate optimization are therefore essential for developing biochar-based strategies to restore invasion-resistant coastal wetland ecosystems.
- 28 October 2026
- Published by Frontiers Media SA in Frontiers in Plant Science
- Vol. 17, 1942632
Open AccessNitrogen addition determines whether invasive plant-derived biochar facilitates or suppresses Flaveria bidentis invasion
Invasive plant-derived biochar offers a promising strategy for converting invasive biomass into valuable soil amendments. However, its effects on plant invasion under increasing nitrogen deposition remain uncertain. Here, we established coastal saline–alkaline wetland microcosms containing native plant communities invaded by Flaveria bidentis. We evaluated biochars derived from two invasive plants, Amaranthus palmeri (AP) and Spartina alterniflora (SA), applied at 1%, 3%, and 5% (w/w), with or without nitrogen addition. We quantified invasive plant performance, native community responses, invasibility, invasion resistance, niche characteristics, and phylogenetic structure. Biochar effects were strongly dependent on feedstock, application rate, and nitrogen availability. In the absence of nitrogen addition, applying AP-biochar or SA-biochar at either 3% or 5% increased the relative invasion risk by enhancing the performance of Flaveria bidentis and weakening the resistance of the native community. Nitrogen addition altered these outcomes but did not consistently suppress relative invasion. AP-biochar with nitrogen generally reduced invasive plant dominance and enhanced community resistance. The 3% AP-biochar + nitrogen most effectively suppressed F. bidentis growth, whereas 5% AP-biochar + nitrogen maximized invasion resistance and diversity recovery. In contrast, 1% and 3% SA-biochar + nitrogen frequently promoted Flaveria bidentis , while 5% SA-biochar showed limited suppression. These findings reveal that the ecological effects of invasive plant-derived biochar depend on feedstock, application rate, and nitrogen availability. Careful feedstock selection and rate optimization are therefore essential for developing biochar-based strategies to restore invasion-resistant coastal wetland ecosystems.
- Open Access
- 20 August 2021
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 18 (16) , 8794
Design of a Microbial Remediation Inoculation Program for Petroleum Hydrocarbon Contaminated Sites Based on Degradation Pathways
This paper analyzed the degradation pathways of petroleum hydrocarbon degradation bacteria, screened the main degradation pathways, and found the petroleum hydrocarbon degradation enzymes corresponding to each step of the degradation pathway. Through the Copeland method, the best inoculation program of petroleum hydrocarbon degradation bacteria in a polluted site was selected as follows: single oxygenation path was dominated by Streptomyces avermitilis, hydroxylation path was dominated by Methylosinus trichosporium OB3b, secondary oxygenation path was dominated by Pseudomonas aeruginosa, secondary hydroxylation path was dominated by Methylococcus capsulatus, double oxygenation path was dominated by Acinetobacter baylyi ADP1, hydrolysis path was dominated by Rhodococcus erythropolis, and CoA path was dominated by Geobacter metallireducens GS-15 to repair petroleum hydrocarbon contaminated sites. The Copeland method score for this solution is 22, which is the highest among the 375 solutions designed in this paper, indicating that it has the best degradation effect. Meanwhile, we verified its effect by the Cdocker method, and the Cdocker energy of this solution is −285.811 kcal/mol, which has the highest absolute value. Among the inoculation programs of the top 13 petroleum hydrocarbon degradation bacteria, the effect of the best inoculation program of petroleum hydrocarbon degradation bacteria was 18% higher than that of the 13th group, verifying that this solution has the best overall degradation effect. The inoculation program of petroleum hydrocarbon degradation bacteria designed in this paper considered the main pathways of petroleum hydrocarbon pollutant degradation, especially highlighting the degradability of petroleum hydrocarbon intermediate degradation products, and enriching the theoretical program of microbial remediation of petroleum hydrocarbon contaminated sites.
- 20 August 2021
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 18 (16) , 8794
Open AccessDesign of a Microbial Remediation Inoculation Program for Petroleum Hydrocarbon Contaminated Sites Based on Degradation Pathways
This paper analyzed the degradation pathways of petroleum hydrocarbon degradation bacteria, screened the main degradation pathways, and found the petroleum hydrocarbon degradation enzymes corresponding to each step of the degradation pathway. Through the Copeland method, the best inoculation program of petroleum hydrocarbon degradation bacteria in a polluted site was selected as follows: single oxygenation path was dominated by Streptomyces avermitilis, hydroxylation path was dominated by Methylosinus trichosporium OB3b, secondary oxygenation path was dominated by Pseudomonas aeruginosa, secondary hydroxylation path was dominated by Methylococcus capsulatus, double oxygenation path was dominated by Acinetobacter baylyi ADP1, hydrolysis path was dominated by Rhodococcus erythropolis, and CoA path was dominated by Geobacter metallireducens GS-15 to repair petroleum hydrocarbon contaminated sites. The Copeland method score for this solution is 22, which is the highest among the 375 solutions designed in this paper, indicating that it has the best degradation effect. Meanwhile, we verified its effect by the Cdocker method, and the Cdocker energy of this solution is −285.811 kcal/mol, which has the highest absolute value. Among the inoculation programs of the top 13 petroleum hydrocarbon degradation bacteria, the effect of the best inoculation program of petroleum hydrocarbon degradation bacteria was 18% higher than that of the 13th group, verifying that this solution has the best overall degradation effect. The inoculation program of petroleum hydrocarbon degradation bacteria designed in this paper considered the main pathways of petroleum hydrocarbon pollutant degradation, especially highlighting the degradability of petroleum hydrocarbon intermediate degradation products, and enriching the theoretical program of microbial remediation of petroleum hydrocarbon contaminated sites.
- Open Access
- 8 July 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (14) , 6305
Ecological Response in the Integrated Process of Biostimulation and Bioaugmentation of Diesel-Contaminated Soil
The study applied microbial molecular biological techniques to show that 2.5% to 3.0% (w/w) of diesel in the soil reduced the types and number of bacteria in the soil and destroyed the microbial communities responsible for the nitrogen cycle. In the meantime, the alkane degradation gene alkB and polycyclic aromatic hydrocarbons (PAHs) degradation gene nah evolved in the contaminated soil. We evaluated four different remediation procedures, in which the biostimulation-bioaugmentation joint process reached the highest degradation rate of diesel, 59.6 ± 0.25% in 27 days. Miseq sequencing and quantitative polymerase chain reaction (qPCR) showed that compared with uncontaminated soil, repaired soil provides abundant functional genes related to soil nitrogen cycle, and the most significant lifting effect on diesel degrading bacteria γ-proteobacteria. Quantitative analysis of degrading functional genes shows that degrading bacteria can be colonized in the soil. Gas chromatography-mass spectrometry (GC-MS) results show that the components remaining in the soil after diesel degradation are alcohol, lipids and a small amount of fatty amine compounds, which have very low toxicity to plants. In an on-site remediation experiment, the diesel content decreased from 2.7% ± 0.3 to 1.12% ± 0.1 after one month of treatment. The soil physical and chemical properties returned to normal levels, confirming the practicability of the biosimulation-bioaugmentation jointed remediation process.
- 8 July 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (14) , 6305
Open AccessEcological Response in the Integrated Process of Biostimulation and Bioaugmentation of Diesel-Contaminated Soil
The study applied microbial molecular biological techniques to show that 2.5% to 3.0% (w/w) of diesel in the soil reduced the types and number of bacteria in the soil and destroyed the microbial communities responsible for the nitrogen cycle. In the meantime, the alkane degradation gene alkB and polycyclic aromatic hydrocarbons (PAHs) degradation gene nah evolved in the contaminated soil. We evaluated four different remediation procedures, in which the biostimulation-bioaugmentation joint process reached the highest degradation rate of diesel, 59.6 ± 0.25% in 27 days. Miseq sequencing and quantitative polymerase chain reaction (qPCR) showed that compared with uncontaminated soil, repaired soil provides abundant functional genes related to soil nitrogen cycle, and the most significant lifting effect on diesel degrading bacteria γ-proteobacteria. Quantitative analysis of degrading functional genes shows that degrading bacteria can be colonized in the soil. Gas chromatography-mass spectrometry (GC-MS) results show that the components remaining in the soil after diesel degradation are alcohol, lipids and a small amount of fatty amine compounds, which have very low toxicity to plants. In an on-site remediation experiment, the diesel content decreased from 2.7% ± 0.3 to 1.12% ± 0.1 after one month of treatment. The soil physical and chemical properties returned to normal levels, confirming the practicability of the biosimulation-bioaugmentation jointed remediation process.
- Open Access
- 17 June 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (12) , 4173
Biodegradation of Total Petroleum Hydrocarbons in Soil: Isolation and Characterization of Bacterial Strains from Oil Contaminated Soil
In this study, we isolated seven strains (termed BY1–7) from polluted soil at an oil station and evaluated their abilities to degrade total petroleum hydrocarbons (TPHs). Following 16 rRNA sequence analysis, the strains were identified as belonging to the genera Bacillus, Acinetobacter, Sphingobium, Rhodococcus, and Pseudomonas, respectively. Growth characterization studies indicated that the optimal growth conditions for the majority of the strains was at 30 °C, with a pH value of approximately 7. Under these conditions, the strains showed a high TPH removal efficiency (50%) after incubation in beef extract peptone medium for seven days. Additionally, we investigated the effect of different growth media on growth impact factors that could potentially affect the strains’ biodegradation rates. Our results suggest a potential application for these strains to facilitate the biodegradation of TPH-contaminated soil.
- 17 June 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (12) , 4173
Open AccessBiodegradation of Total Petroleum Hydrocarbons in Soil: Isolation and Characterization of Bacterial Strains from Oil Contaminated Soil
In this study, we isolated seven strains (termed BY1–7) from polluted soil at an oil station and evaluated their abilities to degrade total petroleum hydrocarbons (TPHs). Following 16 rRNA sequence analysis, the strains were identified as belonging to the genera Bacillus, Acinetobacter, Sphingobium, Rhodococcus, and Pseudomonas, respectively. Growth characterization studies indicated that the optimal growth conditions for the majority of the strains was at 30 °C, with a pH value of approximately 7. Under these conditions, the strains showed a high TPH removal efficiency (50%) after incubation in beef extract peptone medium for seven days. Additionally, we investigated the effect of different growth media on growth impact factors that could potentially affect the strains’ biodegradation rates. Our results suggest a potential application for these strains to facilitate the biodegradation of TPH-contaminated soil.
- 1 February 2017
- Published by Elsevier in Bioresource Technology
- Vol. 225, 159-164
Enhancement of l -lactic acid production via synergism in open co-fermentation of Sophora flavescens residues and food waste
- 1 February 2017
- Published by Elsevier in Bioresource Technology
- Vol. 225, 159-164
Enhancement of l -lactic acid production via synergism in open co-fermentation of Sophora flavescens residues and food waste