Luis Francisco González-Portillo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Luis Francisco González-Portillo has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Javier Muñoz-Antón
Energy Engineering Department, Universidad Politécnica de Madrid, 28006 Madrid, Spain
6 shared publications José M. Martínez-Val
6 shared publications- Rubén Abbas
Thermal Energy for Sustainibility (TE4S) Group, Escuela Técnica Superior de Ingenieros Industriales, Departamento de Ingeniería Energética, Universidad Politécnica de Madrid, 28006 Madrid, Spain
4 shared publications - Clifford K. Ho
Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)
3 shared publications - Kevin Albrecht
Sandia National Laboratories, Albuquerque, NM 87185, USA
3 shared publications - Magdalena Barnetche
Universidad Politécnica de Madrid
3 shared publications
Latest Publications
- Open Access
- 29 October 2026
- Published by Elsevier in Energy Conversion and Management
- Vol. 372
A novel Solar-Driven Molten-Salt methane pyrolysis system with direct Particle-to-Reactor-Wall heat Transfer: Design and Techno-Economic assessment
- 29 October 2026
- Published by Elsevier in Energy Conversion and Management
- Vol. 372
Open AccessA novel Solar-Driven Molten-Salt methane pyrolysis system with direct Particle-to-Reactor-Wall heat Transfer: Design and Techno-Economic assessment
- Open Access
- 21 July 2026
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 241
Review of performance enhancing measures for concentrating solar particle receiver technologies
- 21 July 2026
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 241
Open AccessReview of performance enhancing measures for concentrating solar particle receiver technologies
- Open Access
- 26 January 2026
- Published by TIB Open Publishing in SolarPACES Conference Proceedings
- Vol. 3
Analysis of Solar Heating Integration in a Liquid Metal Reactor for Hydrogen Production
This study analyses the integration of concentrating solar energy with a liquid metal reactor for methane pyrolysis, configured as a vertical column. It compares two irradiation strategies: distributing radiation along the entire column height versus focusing it on the middle section. Parameters such as irradiance, total power, methane mass flow, and residence time are assessed. Both configurations present advantages and disadvantages, but designs achieving very high temperatures are preferred over those prioritizing thermal homogeneity. The findings provide insights for optimizing solar reactors for efficient hydrogen production.
- 26 January 2026
- Published by TIB Open Publishing in SolarPACES Conference Proceedings
- Vol. 3
Open AccessAnalysis of Solar Heating Integration in a Liquid Metal Reactor for Hydrogen Production
This study analyses the integration of concentrating solar energy with a liquid metal reactor for methane pyrolysis, configured as a vertical column. It compares two irradiation strategies: distributing radiation along the entire column height versus focusing it on the middle section. Parameters such as irradiance, total power, methane mass flow, and residence time are assessed. Both configurations present advantages and disadvantages, but designs achieving very high temperatures are preferred over those prioritizing thermal homogeneity. The findings provide insights for optimizing solar reactors for efficient hydrogen production.
- Open Access
- 26 January 2026
- Published by TIB Open Publishing in SolarPACES Conference Proceedings
- Vol. 3
System-Level Assessment of Green Hydrogen Production via SOEC-Solar Thermal Integration
This study investigates the integration of third-generation (Gen3) Concentrated Solar Power (CSP) systems with Solid Oxide Electrolysis Cells (SOEC) for green hydrogen (gH2) production in the Atacama Desert, Chile. A 100 MW CSP plant coupled with SOEC systems of varying capacities is modeled to optimize hydrogen production using thermal storage particles at 780°C. The analysis focuses on the techno-economic performance, highlighting the importance of Thermal Energy Storage (TES) capacity.Results indicate that optimal gH2 production occurs with around 10 hours of TES, beyond which additional storage offers minimal benefits. The findings demonstrate that asymmetrical capacity integration between CSP and SOEC systems is economically advantageous, particularly when maintaining a capacity ratio (CR) between 0.01 and 0.2. This integration can potentially exceed the energy demands of the region’s copper mining industry, contributing to significant reductions in fossil fuel reliance and promoting the commercialization of surplus hydrogen.
- 26 January 2026
- Published by TIB Open Publishing in SolarPACES Conference Proceedings
- Vol. 3
Open AccessSystem-Level Assessment of Green Hydrogen Production via SOEC-Solar Thermal Integration
This study investigates the integration of third-generation (Gen3) Concentrated Solar Power (CSP) systems with Solid Oxide Electrolysis Cells (SOEC) for green hydrogen (gH2) production in the Atacama Desert, Chile. A 100 MW CSP plant coupled with SOEC systems of varying capacities is modeled to optimize hydrogen production using thermal storage particles at 780°C. The analysis focuses on the techno-economic performance, highlighting the importance of Thermal Energy Storage (TES) capacity.Results indicate that optimal gH2 production occurs with around 10 hours of TES, beyond which additional storage offers minimal benefits. The findings demonstrate that asymmetrical capacity integration between CSP and SOEC systems is economically advantageous, particularly when maintaining a capacity ratio (CR) between 0.01 and 0.2. This integration can potentially exceed the energy demands of the region’s copper mining industry, contributing to significant reductions in fossil fuel reliance and promoting the commercialization of surplus hydrogen.
- Open Access
- 30 March 2025
- Published by Elsevier in Thermal Science and Engineering Progress
- Vol. 61
Reducing costs in solar heat: A comparative study of rotatory Fresnel and parabolic trough systems
- 30 March 2025
- Published by Elsevier in Thermal Science and Engineering Progress
- Vol. 61
Open AccessReducing costs in solar heat: A comparative study of rotatory Fresnel and parabolic trough systems
- Open Access
- 12 February 2024
- Published by TIB Open Publishing in SolarPACES Conference Proceedings
- Vol. 1
Particle Receiver Models for Systems Analysis
Particle receivers are gaining importance in the field of Concentrating Solar Power (CSP) due to the high temperature that particles can achieve without degradation. Several researchers are studying the potential of this technology by means of system analyses, which need simple and light models of the system. This study presents two simple models for the particle receiver. The simplest model is a correlation obtained by fitting the results calculated with a more complex receiver model simulated in CFD. The other model is a 1D model, which is benchmarked against the same CFD results. Although both models achieve high coefficient of determination, R2, when compared to CFD results, the 1D model seems to provide more accurate results (especially during sunsets and sunrises). Both models are integrated into a tecno-economic model developed in previous work. The LCOE obtained with the 1D model is between 7% and 10% greater than the one obtained with the correlation.
- 12 February 2024
- Published by TIB Open Publishing in SolarPACES Conference Proceedings
- Vol. 1
Open AccessParticle Receiver Models for Systems Analysis
Particle receivers are gaining importance in the field of Concentrating Solar Power (CSP) due to the high temperature that particles can achieve without degradation. Several researchers are studying the potential of this technology by means of system analyses, which need simple and light models of the system. This study presents two simple models for the particle receiver. The simplest model is a correlation obtained by fitting the results calculated with a more complex receiver model simulated in CFD. The other model is a 1D model, which is benchmarked against the same CFD results. Although both models achieve high coefficient of determination, R2, when compared to CFD results, the 1D model seems to provide more accurate results (especially during sunsets and sunrises). Both models are integrated into a tecno-economic model developed in previous work. The LCOE obtained with the 1D model is between 7% and 10% greater than the one obtained with the correlation.
- Open Access
Techno–Economic Analysis of the Optimum Configuration for Supercritical Carbon Dioxide Cycles in Concentrating Solar Power Systems
There is a general agreement among researchers that supercritical carbon dioxide (sCO2) cycles will be part of the next generation of thermal power plants, especially in concentrating solar power (CSP) plants. While certain studies focus on maximizing the efficiency of these cycles in the hope of achieving a reduction in electricity costs, it is important to note that this assumption does not always hold true. This work provides a comprehensive analysis of the differences between minimizing the cost and maximizing the efficiency for the most remarkable sCO2 cycles. The analysis considers the most important physical uncertainties surrounding CSP and sCO2 cycles, such as turbine inlet temperature, ambient temperature, pressure drop and turbomachinery efficiency. Moreover, the uncertainties related to cost are also analyzed, being divided into uncertainties of sCO2 component costs and uncertainties of heating costs. The CSP system with partial cooling (sometimes with reheating and sometimes without it) is the cheapest configuration in the analyzed cases. However, the differences in cost are generally below 5% (and sometimes neglectable), while the differences in efficiency are significantly larger and below 15%. Besides the much lower efficiency of systems with simple cycle, if the heating cost is low enough, their cost could be even lower than the cost of the system with partial cooling. Systems with recompression cycles could also achieve costs below systems with partial cooling if the design’s ambient temperature and the pressure drop are low.
Open AccessTechno–Economic Analysis of the Optimum Configuration for Supercritical Carbon Dioxide Cycles in Concentrating Solar Power Systems
There is a general agreement among researchers that supercritical carbon dioxide (sCO2) cycles will be part of the next generation of thermal power plants, especially in concentrating solar power (CSP) plants. While certain studies focus on maximizing the efficiency of these cycles in the hope of achieving a reduction in electricity costs, it is important to note that this assumption does not always hold true. This work provides a comprehensive analysis of the differences between minimizing the cost and maximizing the efficiency for the most remarkable sCO2 cycles. The analysis considers the most important physical uncertainties surrounding CSP and sCO2 cycles, such as turbine inlet temperature, ambient temperature, pressure drop and turbomachinery efficiency. Moreover, the uncertainties related to cost are also analyzed, being divided into uncertainties of sCO2 component costs and uncertainties of heating costs. The CSP system with partial cooling (sometimes with reheating and sometimes without it) is the cheapest configuration in the analyzed cases. However, the differences in cost are generally below 5% (and sometimes neglectable), while the differences in efficiency are significantly larger and below 15%. Besides the much lower efficiency of systems with simple cycle, if the heating cost is low enough, their cost could be even lower than the cost of the system with partial cooling. Systems with recompression cycles could also achieve costs below systems with partial cooling if the design’s ambient temperature and the pressure drop are low.
- Open Access
- 19 December 2023
- Published by TIB Open Publishing in SolarPACES Conference Proceedings
- Vol. 1
Defocus Controller for a Rotatory Fresnel Collector
Solar heat for industrial processes (SHIP) is becoming one of the most attractive solutions for industry decarbonisation. Solar plants require a complex control system to manage the fluctuation of their source, solar radiation. One of the problems of this system is the possibility of overheating when solar production is greater than consumption. The main objective of this study was to design a defocus controller for the SunDial, the rotatory Fresnel collector. A dynamic simulation was carried out for a SHIP system with the defocus controller. Finally, a solution to satisfy the accuracy needed for the SunDial was presented.
- 19 December 2023
- Published by TIB Open Publishing in SolarPACES Conference Proceedings
- Vol. 1
Open AccessDefocus Controller for a Rotatory Fresnel Collector
Solar heat for industrial processes (SHIP) is becoming one of the most attractive solutions for industry decarbonisation. Solar plants require a complex control system to manage the fluctuation of their source, solar radiation. One of the problems of this system is the possibility of overheating when solar production is greater than consumption. The main objective of this study was to design a defocus controller for the SunDial, the rotatory Fresnel collector. A dynamic simulation was carried out for a SHIP system with the defocus controller. Finally, a solution to satisfy the accuracy needed for the SunDial was presented.
- Open Access
- 30 June 2023
- Published by Elsevier in Applied Thermal Engineering
- Vol. 232
Optimum integration of latent heat storage in a solar thermal system for industrial processes: In series or in parallel?
- 30 June 2023
- Published by Elsevier in Applied Thermal Engineering
- Vol. 232
Open AccessOptimum integration of latent heat storage in a solar thermal system for industrial processes: In series or in parallel?