Xiaowei Zeng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xiaowei Zeng has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
Liqiang Lin
Department of Mechanical Engineering, University of Texas at San Antonio, San Antonio, USA
13 shared publications- Jalal Uddin Rumi
Department of Mechanical, Aerospace & Industrial Engineering, University of Texas at San Antonio, San Antonio, USA
7 shared publications Mohammad Maghsoudi-Ganjeh
Department of Mechanical Engineering, University of Texas at San Antonio, San Antonio, TX, USA
6 shared publicationsXiaodu Wang
Department of Mechanical Engineering, University of Texas at San Antonio, San Antonio, TX, 78249, USA
5 shared publications- Xiaodu Wang
Department of Biomedical Engineering and Chemical Engineering, The University of Texas at San Antonio, San Antonio, TX, USA; Department of Mechanical, Aerospace, and Industrial Engineering, The University of Texas at San Antonio, San Antonio, TX, USA
5 shared publications Jie Bai
Department of Mechanical Engineering, University of Texas at San Antonio, San Antonio, USA
3 shared publications
Latest Publications
- Open Access
- 12 February 2026
- Published by MDPI AG in Biomimetics
- Vol. 11 (2) , 139
Effect of Regularization on Efficient Modeling and Simulation of Bioinspired Composites Using Cohesive Zone Method
Tessellation-based polyhedral microstructures derived from Voronoi and Laguerre constructions provide a realistic geometric foundation for modeling bioinspired organic–inorganic composites with interfacial fracture. However, even after extensive centroidal relaxation, such tessellations retain numerous lower-dimensional geometric degeneracies—very short edges and small or sliver-like faces—that severely hinder volumetric meshing and render large-scale cohesive-zone simulations computationally impractical. In this work, we employ a geometric regularization step that enforces a minimum admissible feature length prior to meshing and systematically quantify its impact on downstream performance in finite element discretization and cohesive fracture simulation. By eliminating geometric features below the prescribed length scale while preserving grain topology and morphology, the regularized tessellations exhibit sharply improved edge-length and face-diameter distributions and become readily meshable at practical resolutions. When applied to a 3D bioinspired organic–inorganic composite with cohesive interfaces, the regularized geometry reduces volumetric and cohesive element counts nearly fivefold and increases the explicit stable time increment by approximately four orders of magnitude, transforming an otherwise diverging analysis into a robust simulation that converges to the prescribed deformation. These results demonstrate that the prescribed geometric regularization step is not merely a preprocessing refinement but a critical enabling step for efficient and large-scale cohesive fracture simulations of tessellation-based bioinspired composites.
- 12 February 2026
- Published by MDPI AG in Biomimetics
- Vol. 11 (2) , 139
Open AccessEffect of Regularization on Efficient Modeling and Simulation of Bioinspired Composites Using Cohesive Zone Method
Tessellation-based polyhedral microstructures derived from Voronoi and Laguerre constructions provide a realistic geometric foundation for modeling bioinspired organic–inorganic composites with interfacial fracture. However, even after extensive centroidal relaxation, such tessellations retain numerous lower-dimensional geometric degeneracies—very short edges and small or sliver-like faces—that severely hinder volumetric meshing and render large-scale cohesive-zone simulations computationally impractical. In this work, we employ a geometric regularization step that enforces a minimum admissible feature length prior to meshing and systematically quantify its impact on downstream performance in finite element discretization and cohesive fracture simulation. By eliminating geometric features below the prescribed length scale while preserving grain topology and morphology, the regularized tessellations exhibit sharply improved edge-length and face-diameter distributions and become readily meshable at practical resolutions. When applied to a 3D bioinspired organic–inorganic composite with cohesive interfaces, the regularized geometry reduces volumetric and cohesive element counts nearly fivefold and increases the explicit stable time increment by approximately four orders of magnitude, transforming an otherwise diverging analysis into a robust simulation that converges to the prescribed deformation. These results demonstrate that the prescribed geometric regularization step is not merely a preprocessing refinement but a critical enabling step for efficient and large-scale cohesive fracture simulations of tessellation-based bioinspired composites.
- Open Access
- 1 January 2026
- Published by Tech Science Press in Computer Modeling in Engineering & Sciences
- Vol. 147 (1) , 1-10
A Damage-Based Framework for Flexible Cohesive Softening Laws in Abaqus without User Subroutines
Cohesive zone models (CZMs) are widely used to simulate interfacial fracture, where the post-peak softening branch of the traction–separation law (TSL) can strongly influence both the predicted response and the numerical behavior, particularly when the fracture process zone is not small relative to the structure. In Abaqus, however, cohesive elements are natively restricted to bilinear and linear–exponential TSLs, and implementing other softening behaviors typically requires user subroutines, which requires advanced knowledge and limits rapid model development and testing. This work exploits Abaqus’s tabular damage-evolution capability in a different way by constructing the damage variable analytically from a prescribed post-initiation softening response, thereby enabling the direct implementation of a broad class of admissible analytical TSLs, as well as softening curves obtained by fitting experimental data, within the standard Abaqus workflow and without user subroutines. The formulation is developed for pure-mode and mode-independent cohesive behavior with similar interfacial properties in the normal and shear directions and provides a direct mapping between a desired softening response and the corresponding damage evolution. The approach is verified through mode-I and mode-II patch tests, which reproduce the Abaqus-native linear and exponential softening responses exactly under loading and unloading/reloading, and is further assessed using a double cantilever beam delamination benchmark that highlights the sensitivity of the structural response to softening shape while enabling non-native laws, such as modified PPR softening, to be evaluated natively. Finally, simulations of a bioinspired nacre-like composite layer demonstrate how a compact general softening form governs macroscopic stress–strain behavior and fracture patterns in complex microstructures. Collectively, these examples and results establish a practical and robust pathway for implementing and comparing physically meaningful cohesive softening behaviors in Abaqus with minimal overhead.
- 1 January 2026
- Published by Tech Science Press in Computer Modeling in Engineering & Sciences
- Vol. 147 (1) , 1-10
Open AccessA Damage-Based Framework for Flexible Cohesive Softening Laws in Abaqus without User Subroutines
Cohesive zone models (CZMs) are widely used to simulate interfacial fracture, where the post-peak softening branch of the traction–separation law (TSL) can strongly influence both the predicted response and the numerical behavior, particularly when the fracture process zone is not small relative to the structure. In Abaqus, however, cohesive elements are natively restricted to bilinear and linear–exponential TSLs, and implementing other softening behaviors typically requires user subroutines, which requires advanced knowledge and limits rapid model development and testing. This work exploits Abaqus’s tabular damage-evolution capability in a different way by constructing the damage variable analytically from a prescribed post-initiation softening response, thereby enabling the direct implementation of a broad class of admissible analytical TSLs, as well as softening curves obtained by fitting experimental data, within the standard Abaqus workflow and without user subroutines. The formulation is developed for pure-mode and mode-independent cohesive behavior with similar interfacial properties in the normal and shear directions and provides a direct mapping between a desired softening response and the corresponding damage evolution. The approach is verified through mode-I and mode-II patch tests, which reproduce the Abaqus-native linear and exponential softening responses exactly under loading and unloading/reloading, and is further assessed using a double cantilever beam delamination benchmark that highlights the sensitivity of the structural response to softening shape while enabling non-native laws, such as modified PPR softening, to be evaluated natively. Finally, simulations of a bioinspired nacre-like composite layer demonstrate how a compact general softening form governs macroscopic stress–strain behavior and fracture patterns in complex microstructures. Collectively, these examples and results establish a practical and robust pathway for implementing and comparing physically meaningful cohesive softening behaviors in Abaqus with minimal overhead.
- 19 September 2025
- Published by Springer Nature in JOM
- Vol. 77 (12) , 9226-9240
Computational Investigation of the Interplay Between Interfacial and Bulk Material Properties of Bioinspired Nacre-Like Composites
- 19 September 2025
- Published by Springer Nature in JOM
- Vol. 77 (12) , 9226-9240
Computational Investigation of the Interplay Between Interfacial and Bulk Material Properties of Bioinspired Nacre-Like Composites
- 22 July 2025
- Published by Springer Nature in Engineering with Computers
- Vol. 41 (5) , 3651-3671
Polygen: an efficient framework for polycrystals generation and cohesive zone modeling in arbitrary domains
- 22 July 2025
- Published by Springer Nature in Engineering with Computers
- Vol. 41 (5) , 3651-3671
Polygen: an efficient framework for polycrystals generation and cohesive zone modeling in arbitrary domains
- Open Access
Inverse Design of Nonlinear Mechanics of Bio-inspired Materials Through Interface Engineering and Bayesian Optimization
In many biological materials such as nacre and bone, the material structure consists of hard grains and soft interfaces, with the interfaces playing a significant role in the material's mechanical behavior. This type of structures has been utilized in the design of various bio-inspired composite materials. Such applications often require the materials to exhibit a specified nonlinear stress-strain relationship. A key challenge lies in identifying appropriate interface properties from an infinite search space to achieve a given target stress-strain curve. This study introduces a Bayesian optimization (BO) framework specifically tailored for the inverse design of interfaces in bio-inspired composites. As a notable advantage, this method is capable of expanding the design space, allowing the discovery of optimal solutions even when the target curve deviates significantly from the initial dataset. Furthermore, our results show that BO can identify distinct interface designs that produce similar target stress-strain responses, yet differ in their deformation and failure mechanisms. These findings highlight the potential of the proposed BO framework to address a wide range of inverse design challenges in nonlinear mechanics problems.
Open AccessInverse Design of Nonlinear Mechanics of Bio-inspired Materials Through Interface Engineering and Bayesian Optimization
In many biological materials such as nacre and bone, the material structure consists of hard grains and soft interfaces, with the interfaces playing a significant role in the material's mechanical behavior. This type of structures has been utilized in the design of various bio-inspired composite materials. Such applications often require the materials to exhibit a specified nonlinear stress-strain relationship. A key challenge lies in identifying appropriate interface properties from an infinite search space to achieve a given target stress-strain curve. This study introduces a Bayesian optimization (BO) framework specifically tailored for the inverse design of interfaces in bio-inspired composites. As a notable advantage, this method is capable of expanding the design space, allowing the discovery of optimal solutions even when the target curve deviates significantly from the initial dataset. Furthermore, our results show that BO can identify distinct interface designs that produce similar target stress-strain responses, yet differ in their deformation and failure mechanisms. These findings highlight the potential of the proposed BO framework to address a wide range of inverse design challenges in nonlinear mechanics problems.
- Open Access
- 7 May 2024
- Published by MDPI AG in Journal of Composites Science
- Vol. 8 (5) , 173
Computational Investigation of the Mechanical Response of a Bioinspired Nacre-like Nanocomposite under Three-Point Bending
Natural biological nanocomposites, like nacre, demonstrate extraordinary fracture toughness, surpassing their base materials, attributed to their intricate staggered hierarchical architectures integrating hard and soft phases. The enhancement of toughness in these composites is often linked to the crack-deflection mechanism. Leveraging the core design principles that enhance durability, resilience, and robustness in organic materials, this paper describes the use of computational modeling and simulation to perform a three-point bending test on a 3D staggered nanocomposite intentionally crafted to mimic the detailed microstructure of nacre. We adopted a previously proposed interfacial zone model that conceptualizes the “relatively soft” layer as an interface between the “hard” mineral tablets and the microstructure’s interlayer spaces to examine how the microstructure and interface characteristics affect the mechanical responses and failure mechanisms. By comparing the model’s predictions with experimental data on natural nacre, the simulations unveil the mechanisms of tablet separation through adjacent layer sliding and crack deflection across interfacial zones. This study offers a robust numerical method for investigating the fracture toughening mechanisms and damage evolution and contributes to a deeper understanding of the complex interplays within biomimetic materials.
- 7 May 2024
- Published by MDPI AG in Journal of Composites Science
- Vol. 8 (5) , 173
Open AccessComputational Investigation of the Mechanical Response of a Bioinspired Nacre-like Nanocomposite under Three-Point Bending
Natural biological nanocomposites, like nacre, demonstrate extraordinary fracture toughness, surpassing their base materials, attributed to their intricate staggered hierarchical architectures integrating hard and soft phases. The enhancement of toughness in these composites is often linked to the crack-deflection mechanism. Leveraging the core design principles that enhance durability, resilience, and robustness in organic materials, this paper describes the use of computational modeling and simulation to perform a three-point bending test on a 3D staggered nanocomposite intentionally crafted to mimic the detailed microstructure of nacre. We adopted a previously proposed interfacial zone model that conceptualizes the “relatively soft” layer as an interface between the “hard” mineral tablets and the microstructure’s interlayer spaces to examine how the microstructure and interface characteristics affect the mechanical responses and failure mechanisms. By comparing the model’s predictions with experimental data on natural nacre, the simulations unveil the mechanisms of tablet separation through adjacent layer sliding and crack deflection across interfacial zones. This study offers a robust numerical method for investigating the fracture toughening mechanisms and damage evolution and contributes to a deeper understanding of the complex interplays within biomimetic materials.
- Open Access
- 1 January 2024
- Published by Tech Science Press in Computer Modeling in Engineering & Sciences
- Vol. 140 (2) , 1299-1313
Predicting the Mechanical Behavior of a Bioinspired Nanocomposite through Machine Learning
The bioinspired nacre or bone structure represents a remarkable example of tough, strong, lightweight, and multifunctional structures in biological materials that can be an inspiration to design bioinspired high-performance materials. The bioinspired structure consists of hard grains and soft material interfaces. While the material interface has a very low volume percentage, its property has the ability to determine the bulk material response. Machine learning technology nowadays is widely used in material science. A machine learning model was utilized to predict the material response based on the material interface properties in a bioinspired nanocomposite. This model was trained on a comprehensive dataset of material response and interface properties, allowing it to make accurate predictions. The results of this study demonstrate the efficiency and high accuracy of the machine learning model. The successful application of machine learning into the material property prediction process has the potential to greatly enhance both the efficiency and accuracy of the material design process.
- 1 January 2024
- Published by Tech Science Press in Computer Modeling in Engineering & Sciences
- Vol. 140 (2) , 1299-1313
Open AccessPredicting the Mechanical Behavior of a Bioinspired Nanocomposite through Machine Learning
The bioinspired nacre or bone structure represents a remarkable example of tough, strong, lightweight, and multifunctional structures in biological materials that can be an inspiration to design bioinspired high-performance materials. The bioinspired structure consists of hard grains and soft material interfaces. While the material interface has a very low volume percentage, its property has the ability to determine the bulk material response. Machine learning technology nowadays is widely used in material science. A machine learning model was utilized to predict the material response based on the material interface properties in a bioinspired nanocomposite. This model was trained on a comprehensive dataset of material response and interface properties, allowing it to make accurate predictions. The results of this study demonstrate the efficiency and high accuracy of the machine learning model. The successful application of machine learning into the material property prediction process has the potential to greatly enhance both the efficiency and accuracy of the material design process.
- Open Access
- 21 August 2023
- Published by MDPI AG in Journal of Composites Science
- Vol. 7 (8) , 341
Computational Investigation of the Mechanical Behavior of a Bone-Inspired Nanocomposite Material
Bioinspired nanocomposites aim to mimic the structure of natural materials. These materials exhibit excellent mechanical properties such as high strength, toughness, and stiffness. Using modeling and simulation, we can gain insight into the underlying mechanisms that control the properties of these materials, study the impact of various parameters on their performance, and design new materials with high performance. This study investigates a bone-inspired nanocomposite that consists of two subunits: Subunit-A (Mineralized Collagen Fibril) and Subunit-B (Extrafibrillar Matrix). Subunit-B provides the composite with stiffness before yielding. After yielding, Subunit-A stretches to accommodate the deformation up to the final failure. The adhesive material in the interface plays an important role in this nanocomposite’s failure. The composite’s toughness is enhanced by multiple mechanisms: diffuse damage in Subunit-B, strain relaxation around crack tips through horizontal interface delamination between the subunits, and the crack bridging role of Subunit-A. This study provides insight into the mechanical behavior of bone-inspired nanocomposites under tensile loading conditions, highlighting the importance of the adhesive phase in optimizing the material performance in various applications.
- 21 August 2023
- Published by MDPI AG in Journal of Composites Science
- Vol. 7 (8) , 341
Open AccessComputational Investigation of the Mechanical Behavior of a Bone-Inspired Nanocomposite Material
Bioinspired nanocomposites aim to mimic the structure of natural materials. These materials exhibit excellent mechanical properties such as high strength, toughness, and stiffness. Using modeling and simulation, we can gain insight into the underlying mechanisms that control the properties of these materials, study the impact of various parameters on their performance, and design new materials with high performance. This study investigates a bone-inspired nanocomposite that consists of two subunits: Subunit-A (Mineralized Collagen Fibril) and Subunit-B (Extrafibrillar Matrix). Subunit-B provides the composite with stiffness before yielding. After yielding, Subunit-A stretches to accommodate the deformation up to the final failure. The adhesive material in the interface plays an important role in this nanocomposite’s failure. The composite’s toughness is enhanced by multiple mechanisms: diffuse damage in Subunit-B, strain relaxation around crack tips through horizontal interface delamination between the subunits, and the crack bridging role of Subunit-A. This study provides insight into the mechanical behavior of bone-inspired nanocomposites under tensile loading conditions, highlighting the importance of the adhesive phase in optimizing the material performance in various applications.