Mahesh Kumar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mahesh Kumar has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Gagandeep Kaur Sidhu
Department of Processing and Food Engineering, Punjab Agricultural University, Punjab, India
2 shared publications - Preetinder Kaur
Department of Processing and Food Engineering Punjab Agricultural University Ludhiana India
2 shared publications Ramandeep Kaur
Punjab Agricultural University
2 shared publications- Baldev Singh Kalsi
Department of Processing & Food Engineering, Punjab Agricultural University, Ludhiana, Punjab, India
1 shared publication Bvc Mahajan
Punjab Agricultural University
1 shared publication- Gurjeet Kaur
Department of Processing and Food Engineering Punjab Agricultural University Ludhiana India
1 shared publication
Latest Publications
- 20 August 2026
- Published by Elsevier in Food Control
- Vol. 192
Quality assessment and ANN-based shelf-life prediction of ozonated-roasted groundnut kernels stored in different types of packaging
- 20 August 2026
- Published by Elsevier in Food Control
- Vol. 192
Quality assessment and ANN-based shelf-life prediction of ozonated-roasted groundnut kernels stored in different types of packaging
- Open Access
- 1 January 2026
- Published by Wiley in Journal of Food Processing and Preservation
- Vol. 2026 (1)
Recent Trends in Post‐Harvest Management and Processing of White Button Mushroom ( Agaricus bisporus ): A Comprehensive Review
The production and post‐harvest management of white button mushroom Agaricus bisporus play an important role in meeting the world’s demand, particularly in India, where it offers significant economic gain for the farmers. The aim of the present review is to summarize the nutritional and health aspects of A. bisporus , which are abundant in proteins, vitamins, minerals, and bioactive compounds with antioxidant and anti‐cancer potential. Despite of extensive studies on the cultivation of mushrooms, a knowledge gap exists in post‐harvest physiology, optimization of preservation techniques, and assessment of environment friendly and cost‐effective methods for small and marginal farmers. The paper outlines the various factors influencing the mushroom quality and approaches to mitigate such problems with the application of advanced techniques. It reviews the recent trends on post‐harvest management, processing, and packaging of white button mushroom with special reference to preservation methods to extend shelf life and quality. Ultrasound, freezing, drying, modified atmosphere packaging (MAP), essential oil treatment, etc. are reported as effective processing techniques to retard microbial growth and maintain sensory attributes. This review thus highlights the different strategies to enhance the nutritional quality and marketability of mushrooms to make them a healthy and sustainable food source.
- 1 January 2026
- Published by Wiley in Journal of Food Processing and Preservation
- Vol. 2026 (1)
Open AccessRecent Trends in Post‐Harvest Management and Processing of White Button Mushroom ( Agaricus bisporus ): A Comprehensive Review
The production and post‐harvest management of white button mushroom Agaricus bisporus play an important role in meeting the world’s demand, particularly in India, where it offers significant economic gain for the farmers. The aim of the present review is to summarize the nutritional and health aspects of A. bisporus , which are abundant in proteins, vitamins, minerals, and bioactive compounds with antioxidant and anti‐cancer potential. Despite of extensive studies on the cultivation of mushrooms, a knowledge gap exists in post‐harvest physiology, optimization of preservation techniques, and assessment of environment friendly and cost‐effective methods for small and marginal farmers. The paper outlines the various factors influencing the mushroom quality and approaches to mitigate such problems with the application of advanced techniques. It reviews the recent trends on post‐harvest management, processing, and packaging of white button mushroom with special reference to preservation methods to extend shelf life and quality. Ultrasound, freezing, drying, modified atmosphere packaging (MAP), essential oil treatment, etc. are reported as effective processing techniques to retard microbial growth and maintain sensory attributes. This review thus highlights the different strategies to enhance the nutritional quality and marketability of mushrooms to make them a healthy and sustainable food source.
- 28 October 2025
- Published by Springer Nature in Journal of Biosystems Engineering
- Vol. 50 (4) , 545-554
Comparative Analysis of Hermetically and Conventionally Stored Paddy (Basmati-1121)
- 28 October 2025
- Published by Springer Nature in Journal of Biosystems Engineering
- Vol. 50 (4) , 545-554
Comparative Analysis of Hermetically and Conventionally Stored Paddy (Basmati-1121)
- Open Access
- 1 January 2017
- Published by Diva Enterprises Private Limited in Agricultural Research Journal
- Vol. 54 (1) , 76-84
Drying characteristics of mango and development of computer simulated model
The effect of different air drying temperatures on mango slices in convective trays was investigated and based on findings a computer programme has been prepared. The mango fruits of cv. Rampuri Gola were procured from farmer's field, washed, sliced and blanched. The slices were spread in single layer in tray dryer. The drying was carried out in a tray dryer with heated air at temperatures of 50, 60 and 70°C and their combinations. The time elapsed to attain constant weight was observed to be 480–330 minutes in selected drying conditions (50°-70°C). The logarithmic drying model indicated the best fit to the data obtained (coefficient of determination R2 0.994–0.999). The maximum moisture diffusivity was found (1.91 × 10−10) at 70°C. Various quality parameters of dehydrated product such as maximum ascorbic acid (56.6% at 60°C) and polyphenols content (1700 mg/100g GAE at 70°C) were recorded. Rehydration ratio was observed as 8.73 at 70°C, because of short drying time and lesser damage to cells. Samples dried at lower temperature had better colour retention as compared to those dried at higher temperature. On the basis of RSM, optimum operating conditions for drying were observed to be 67.54°C drying air temperature, and 0.48 g/cm3 loading density. A computer programme to present the moisture loss with exposure time has been developed in ‘visual basic’ language based upon outcome of drying experiments. The programme can be used for calculation of drying characteristics during dryer operation.
- 1 January 2017
- Published by Diva Enterprises Private Limited in Agricultural Research Journal
- Vol. 54 (1) , 76-84
Open AccessDrying characteristics of mango and development of computer simulated model
The effect of different air drying temperatures on mango slices in convective trays was investigated and based on findings a computer programme has been prepared. The mango fruits of cv. Rampuri Gola were procured from farmer's field, washed, sliced and blanched. The slices were spread in single layer in tray dryer. The drying was carried out in a tray dryer with heated air at temperatures of 50, 60 and 70°C and their combinations. The time elapsed to attain constant weight was observed to be 480–330 minutes in selected drying conditions (50°-70°C). The logarithmic drying model indicated the best fit to the data obtained (coefficient of determination R2 0.994–0.999). The maximum moisture diffusivity was found (1.91 × 10−10) at 70°C. Various quality parameters of dehydrated product such as maximum ascorbic acid (56.6% at 60°C) and polyphenols content (1700 mg/100g GAE at 70°C) were recorded. Rehydration ratio was observed as 8.73 at 70°C, because of short drying time and lesser damage to cells. Samples dried at lower temperature had better colour retention as compared to those dried at higher temperature. On the basis of RSM, optimum operating conditions for drying were observed to be 67.54°C drying air temperature, and 0.48 g/cm3 loading density. A computer programme to present the moisture loss with exposure time has been developed in ‘visual basic’ language based upon outcome of drying experiments. The programme can be used for calculation of drying characteristics during dryer operation.
- 1 January 2016
- Published by Diva Enterprises Private Limited in Agricultural Research Journal
- Vol. 53 (3) , 446-449
Performance Evaluation of Different Grain Moisture Meters
- 1 January 2016
- Published by Diva Enterprises Private Limited in Agricultural Research Journal
- Vol. 53 (3) , 446-449
Performance Evaluation of Different Grain Moisture Meters
- 1 January 2015
- Published by Diva Enterprises Private Limited in Agricultural Research Journal
- Vol. 52 (4) , 80-86
Thin layer drying kinetics of potato mash
The study was conducted to investigate the effect of temperature on hot-air drying kinetics of potato mash and to evaluate the best model predicting the drying kinetics along with the colour changes during mechanical tray drying. Commonly cultivated variety namely Kufri Jyoti was selected for the study. Potato mash was soaked in 0.2 percent KMS solution to reduce the reducing sugar followed by hot-air drying in single layer mash with thickness vary from 5–7 mm at different temperatures (50–70°C) in a forced convection dryer. In order to estimate and select the appropriate drying model, five different models which are semi theoretical and/or empirical were applied to the experimental data and compared. The goodness of fit was determined using the coefficient of determination (R2), reduced chi square (χ2), root mean square error (RMSE) and mean bias error (MBE). Among the models proposed, the semi-empirical logarithmic model was found to best explain thin layer drying behaviour of the potato mash as compared to the other models over the experimental temperature range. By increasing the drying air temperature, the effective moisture diffusivity values increased from from 1.43684 ×10−10 m2/s to 2.6582×10−10 m2/s as temperature increase from 50°C to 70°C. Samples dried at lower temperature had better lightness (higher L values) compared to those dried at higher temperature.
- 1 January 2015
- Published by Diva Enterprises Private Limited in Agricultural Research Journal
- Vol. 52 (4) , 80-86
Thin layer drying kinetics of potato mash
The study was conducted to investigate the effect of temperature on hot-air drying kinetics of potato mash and to evaluate the best model predicting the drying kinetics along with the colour changes during mechanical tray drying. Commonly cultivated variety namely Kufri Jyoti was selected for the study. Potato mash was soaked in 0.2 percent KMS solution to reduce the reducing sugar followed by hot-air drying in single layer mash with thickness vary from 5–7 mm at different temperatures (50–70°C) in a forced convection dryer. In order to estimate and select the appropriate drying model, five different models which are semi theoretical and/or empirical were applied to the experimental data and compared. The goodness of fit was determined using the coefficient of determination (R2), reduced chi square (χ2), root mean square error (RMSE) and mean bias error (MBE). Among the models proposed, the semi-empirical logarithmic model was found to best explain thin layer drying behaviour of the potato mash as compared to the other models over the experimental temperature range. By increasing the drying air temperature, the effective moisture diffusivity values increased from from 1.43684 ×10−10 m2/s to 2.6582×10−10 m2/s as temperature increase from 50°C to 70°C. Samples dried at lower temperature had better lightness (higher L values) compared to those dried at higher temperature.