Habiba Nouali
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Habiba Nouali has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
- Toufic Jean Daou
Université de Haute-Alsace, CNRS, Institut de Science des Matériaux de Mulhouse (IS2M), UMR 7361, Axe Matériaux à Porosité Contrôlée (MPC), F-68100, Mulhouse, France
11 shared publications - Andrey Ryzhikov
Université de Haute-Alsace, CNRS, Institut de Science des Matériaux de Mulhouse (IS2M), UMR 7361, Axe Matériaux à Porosité Contrôlée (MPC), F-68100, Mulhouse, France
4 shared publications - Ludovic Josien
Université de Haute-Alsace, CNRS, IS2M UMR 7361, F-68100 Mulhouse, France
4 shared publications - Bénédicte Lebeau
Université de Haute Alsace
3 shared publications - Laure Michelin
Université de Haute-Alsace, CNRS, IS2M UMR 7361, F-68100 Mulhouse, France
3 shared publications - Claire Marichal
IS2M (Institut de Science des Matériaux de Mulhouse, UMR 7361), Université de Haute Alsace (UHA), CNRS, 68100 Mulhouse, France
2 shared publications
Latest Publications
- Open Access
- 6 November 2025
- Published by MDPI AG in Inorganics
- Vol. 13 (11) , 371
High-Pressure Intrusion of Saline Solutions in Hydrophobic STT-Type Zeosil
High-pressure intrusion of water and LiCl aqueous solutions at different concentrations in hydrophobic STT-type zeosil was studied for possible applications in absorption and storage of mechanical energy. The water is intruded at a pressure of 35 MPa and remains trapped in the pores after pressure release, which corresponds to bumper behavior with total energy absorption. The use of LiCl solution leads to a change in system behavior, regardless of the concentration investigated (10, 15, or 20 M). Its intrusion is mainly reversible, but a small part of the intruded liquid remains in the pores after the first intrusion–extrusion cycle, which corresponds to a mixed behavior of bumper and shock absorber. The intrusion pressure rises strongly with an increase in salt concentration and reaches 227 MPa for a LiCl 20 M solution; the stored energy of 27 J/g can be achieved. The characterization of STT-type zeosil before and after intrusion–extrusion tests by structural and physicochemical methods shows that silanol defects are formed both under the intrusion of water and LiCl solutions. The relationship between zeosil structure and intrusion–extrusion characteristics is discussed by comparing the results obtained with those of other structural types of zeosils.
- 6 November 2025
- Published by MDPI AG in Inorganics
- Vol. 13 (11) , 371
Open AccessHigh-Pressure Intrusion of Saline Solutions in Hydrophobic STT-Type Zeosil
High-pressure intrusion of water and LiCl aqueous solutions at different concentrations in hydrophobic STT-type zeosil was studied for possible applications in absorption and storage of mechanical energy. The water is intruded at a pressure of 35 MPa and remains trapped in the pores after pressure release, which corresponds to bumper behavior with total energy absorption. The use of LiCl solution leads to a change in system behavior, regardless of the concentration investigated (10, 15, or 20 M). Its intrusion is mainly reversible, but a small part of the intruded liquid remains in the pores after the first intrusion–extrusion cycle, which corresponds to a mixed behavior of bumper and shock absorber. The intrusion pressure rises strongly with an increase in salt concentration and reaches 227 MPa for a LiCl 20 M solution; the stored energy of 27 J/g can be achieved. The characterization of STT-type zeosil before and after intrusion–extrusion tests by structural and physicochemical methods shows that silanol defects are formed both under the intrusion of water and LiCl solutions. The relationship between zeosil structure and intrusion–extrusion characteristics is discussed by comparing the results obtained with those of other structural types of zeosils.
- 10 May 2024
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 57 (3) , 681-689
High-pressure intrusion of double salt aqueous solution in pure silica chabazite: searching for cation selectivity
- 10 May 2024
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 57 (3) , 681-689
High-pressure intrusion of double salt aqueous solution in pure silica chabazite: searching for cation selectivity
- Open Access
- 2 June 2022
- Published by MDPI AG in Journal of Functional Biomaterials
- Vol. 13 (2) , 73
Rational Design and Characterisation of Novel Mono- and Bimetallic Antibacterial Linde Type A Zeolite Materials
The development of antimicrobial devices and surfaces requires the setup of suitable materials, able to store and release active principles. In this context, zeolites, which are microporous aluminosilicate minerals, hold great promise, since they are able to serve as a reservoir for metal-ions with antimicrobial properties. Here, we report on the preparation of Linde Type A zeolites, partially exchanged with combinations of metal-ions (Ag+, Cu2+, Zn2+) at different loadings (0.1–11.9 wt.%). We combine X-ray fluorescence, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction to monitor the metal-ion contents, distribution, and conservation of the zeolite structure after exchange. Then, we evaluate their antimicrobial activity, using agar dilution and optical-density monitoring of Escherichia coli cultures. The results indicate that silver-loaded materials are at least 70-fold more active than the copper-, zinc-, and non-exchanged ones. Moreover, zeolites loaded with lower Ag+ concentrations remain active down to 0.1 wt.%, and their activities are directly proportional to the total Ag content. Sequential exchanges with two metal ions (Ag+ and either Cu2+, Zn2+) display synergetic or antagonist effects, depending on the quantity of the second metal. Altogether, this work shows that, by combining analytical and quantitative methods, it is possible to fine-tune the composition of bi-metal-exchanged zeolites, in order to maximise their antimicrobial potential, opening new ways for the development of next-generation composite zeolite-containing antimicrobial materials, with potential applications for the design of dental or bone implants, as well as biomedical devices and pharmaceutical products.
- 2 June 2022
- Published by MDPI AG in Journal of Functional Biomaterials
- Vol. 13 (2) , 73
Open AccessRational Design and Characterisation of Novel Mono- and Bimetallic Antibacterial Linde Type A Zeolite Materials
The development of antimicrobial devices and surfaces requires the setup of suitable materials, able to store and release active principles. In this context, zeolites, which are microporous aluminosilicate minerals, hold great promise, since they are able to serve as a reservoir for metal-ions with antimicrobial properties. Here, we report on the preparation of Linde Type A zeolites, partially exchanged with combinations of metal-ions (Ag+, Cu2+, Zn2+) at different loadings (0.1–11.9 wt.%). We combine X-ray fluorescence, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction to monitor the metal-ion contents, distribution, and conservation of the zeolite structure after exchange. Then, we evaluate their antimicrobial activity, using agar dilution and optical-density monitoring of Escherichia coli cultures. The results indicate that silver-loaded materials are at least 70-fold more active than the copper-, zinc-, and non-exchanged ones. Moreover, zeolites loaded with lower Ag+ concentrations remain active down to 0.1 wt.%, and their activities are directly proportional to the total Ag content. Sequential exchanges with two metal ions (Ag+ and either Cu2+, Zn2+) display synergetic or antagonist effects, depending on the quantity of the second metal. Altogether, this work shows that, by combining analytical and quantitative methods, it is possible to fine-tune the composition of bi-metal-exchanged zeolites, in order to maximise their antimicrobial potential, opening new ways for the development of next-generation composite zeolite-containing antimicrobial materials, with potential applications for the design of dental or bone implants, as well as biomedical devices and pharmaceutical products.
- Open Access
- 14 April 2022
- Published by LIDSEN Publishing Inc in Catalysis Research
- Vol. 02 (02) , 1-27
Hierarchical MFI Zeolite Catalysts: How to Determine Their Textural Properties?-A Comparative Study
It is important to elucidate the role of the surface areas and pore volumes of hierarchical zeolites to understand their behavior as catalysts. Micro-and mesopore surface areas and volumes of the hierarchical MFI (Mobil Five zeolites) were assessed following several methods: (i) N2 adsorption at 77 K using classical and corrected t-plot analyses methods, (ii) pre-adsorption of n-nonane was followed by the study of the N2 adsorption at 77 K, and (iii) non-local-density functional theory (NLDFT) analysis using either the N2 adsorption method at 77 K or the Ar adsorption method at 87 K. In order to assess the viability of each method, a set of hierarchical MFI-type zeolites was prepared by different approaches: alkaline treatment (desilication), synthesis in clear solution (nanocrystals), synthesis in the presence of bifunctional organic surfactant (nanosheets), and micelle-templating assisted alkaline treatment. NLDFT methods could not be used to accurately determine the micro-and mesopore surface areas, as larger surface areas compared to those obtained using the BET equation were obtained. This overestimation is even more pronounced with Ar at 87 K. Results from the classical t-plot analysis performed under conditions of N2 adsorption at 77 K for mechanical mixtures of MFI and MCM-41 revealed the underestimation of the micropore volumes and the overestimation of the mesopore surface areas. Corrections were provided for t-plot analysis. The results obtained using the corrected t-plot method were in good agreement with the results obtained using the NLDFT method in the presence of Ar at 87 K during the calculation of the micro-and mesopore volumes of hierarchical MFI-type zeolites. Micropore and mesopore surface areas calculated by the corrected t-plot method were in good agreement with those calculated using the n-nonane pre-adsorption method for the hierarchical MFI-type zeolites characterized by the presence of large zeolite domains. The NLDFT method, in the presence of Ar, can be used to assess the micro-and mesopore volumes of the hierarchical zeolites at 87 K. However, it cannot be used to determine the surface areas. The corrected t-plot method can be used to efficiently calculate both the volumes and surface areas.
- 14 April 2022
- Published by LIDSEN Publishing Inc in Catalysis Research
- Vol. 02 (02) , 1-27
Open AccessHierarchical MFI Zeolite Catalysts: How to Determine Their Textural Properties?-A Comparative Study
It is important to elucidate the role of the surface areas and pore volumes of hierarchical zeolites to understand their behavior as catalysts. Micro-and mesopore surface areas and volumes of the hierarchical MFI (Mobil Five zeolites) were assessed following several methods: (i) N2 adsorption at 77 K using classical and corrected t-plot analyses methods, (ii) pre-adsorption of n-nonane was followed by the study of the N2 adsorption at 77 K, and (iii) non-local-density functional theory (NLDFT) analysis using either the N2 adsorption method at 77 K or the Ar adsorption method at 87 K. In order to assess the viability of each method, a set of hierarchical MFI-type zeolites was prepared by different approaches: alkaline treatment (desilication), synthesis in clear solution (nanocrystals), synthesis in the presence of bifunctional organic surfactant (nanosheets), and micelle-templating assisted alkaline treatment. NLDFT methods could not be used to accurately determine the micro-and mesopore surface areas, as larger surface areas compared to those obtained using the BET equation were obtained. This overestimation is even more pronounced with Ar at 87 K. Results from the classical t-plot analysis performed under conditions of N2 adsorption at 77 K for mechanical mixtures of MFI and MCM-41 revealed the underestimation of the micropore volumes and the overestimation of the mesopore surface areas. Corrections were provided for t-plot analysis. The results obtained using the corrected t-plot method were in good agreement with the results obtained using the NLDFT method in the presence of Ar at 87 K during the calculation of the micro-and mesopore volumes of hierarchical MFI-type zeolites. Micropore and mesopore surface areas calculated by the corrected t-plot method were in good agreement with those calculated using the n-nonane pre-adsorption method for the hierarchical MFI-type zeolites characterized by the presence of large zeolite domains. The NLDFT method, in the presence of Ar, can be used to assess the micro-and mesopore volumes of the hierarchical zeolites at 87 K. However, it cannot be used to determine the surface areas. The corrected t-plot method can be used to efficiently calculate both the volumes and surface areas.
- Open Access
Zeolite-Polymer Composite Materials as Water Scavenger
The influence of the charge compensating cation nature (Na+, Mg2+) on the water adsorption properties of LTA-type zeolites used as filler in composite materials (zeolite/polymers) was investigated. Large scale cation exchanges were performed on zeolite powder at 80 °C for 2 h using 1 M magnesium chloride (MgCl2) aqueous solutions. XRF, ICP, and EDX analyses indicate a successful cationic exchange process without the modification of the zeolite structure as shown by XRD and solid-state NMR analyses. Composite materials (granulates and molded parts) were manufactured using to extrusion and injection processes. In the case of MgA zeolite, nitrogen adsorption–desorption experiments allowed us to measure a microporous volume, unlike NaA zeolite, which is non-porous to nitrogen probe molecule. SEM and EDX analyses highlighted the homogeneous distribution of zeolite crystals into the polymer matrix. Water adsorption capacities confirmed that the trends observed in the zeolite powder samples are preserved after dragging zeolites into composite formulations. Granulates and molded parts composite samples containing the magnesium exchanged zeolite showed an increase of their water adsorption capacity up to +27% in comparison to composite samples containing the non-exchanged zeolite. The MgA composite is more promising for water decontamination applications due to its higher water adsorption properties than the NaA composite.
Open AccessZeolite-Polymer Composite Materials as Water Scavenger
The influence of the charge compensating cation nature (Na+, Mg2+) on the water adsorption properties of LTA-type zeolites used as filler in composite materials (zeolite/polymers) was investigated. Large scale cation exchanges were performed on zeolite powder at 80 °C for 2 h using 1 M magnesium chloride (MgCl2) aqueous solutions. XRF, ICP, and EDX analyses indicate a successful cationic exchange process without the modification of the zeolite structure as shown by XRD and solid-state NMR analyses. Composite materials (granulates and molded parts) were manufactured using to extrusion and injection processes. In the case of MgA zeolite, nitrogen adsorption–desorption experiments allowed us to measure a microporous volume, unlike NaA zeolite, which is non-porous to nitrogen probe molecule. SEM and EDX analyses highlighted the homogeneous distribution of zeolite crystals into the polymer matrix. Water adsorption capacities confirmed that the trends observed in the zeolite powder samples are preserved after dragging zeolites into composite formulations. Granulates and molded parts composite samples containing the magnesium exchanged zeolite showed an increase of their water adsorption capacity up to +27% in comparison to composite samples containing the non-exchanged zeolite. The MgA composite is more promising for water decontamination applications due to its higher water adsorption properties than the NaA composite.
- Open Access
Guided Crystallization of Zeolite Beads Composed of ZSM-12 Nanosponges
The direct route using a bifunctional amphiphilic structuring agent for the synthesis of hierarchical nanozeolites coupled with pseudomorphic transformation was used for the crystallization of hierarchized zeolite beads/hollow spheres composed of ZSM-12 (MTW structural-type) with nanosponge morphology. These beads/hollow spheres have the same average diameter of 20 µm as their counterpart amorphous mesoporous silica beads used as precursor in the starting synthesis mixture. The effects of synthesis parameters, such as stirring and treatment time at 140 °C, on the morphology, structure, and texture of the materials have been investigated using X-ray diffraction (XRD), N2 sorption, scanning electronic microscopy (SEM), and transmission electronic microscopy (TEM) techniques. Static conditions were found necessary to maintain the morphology of the starting amorphous silica beads. An Ostwald ripening phenomenon was observed with the increase in hydrothermal treatment time leading to the dissolution of the interior of some beads to form core shell beads or hollow spheres with larger crystals on the outer surface. These ZSM-12 beads/hollow spheres possess higher porous volume than conventional ZSM-12 zeolite powder and can be used directly for industrial applications.
Open AccessGuided Crystallization of Zeolite Beads Composed of ZSM-12 Nanosponges
The direct route using a bifunctional amphiphilic structuring agent for the synthesis of hierarchical nanozeolites coupled with pseudomorphic transformation was used for the crystallization of hierarchized zeolite beads/hollow spheres composed of ZSM-12 (MTW structural-type) with nanosponge morphology. These beads/hollow spheres have the same average diameter of 20 µm as their counterpart amorphous mesoporous silica beads used as precursor in the starting synthesis mixture. The effects of synthesis parameters, such as stirring and treatment time at 140 °C, on the morphology, structure, and texture of the materials have been investigated using X-ray diffraction (XRD), N2 sorption, scanning electronic microscopy (SEM), and transmission electronic microscopy (TEM) techniques. Static conditions were found necessary to maintain the morphology of the starting amorphous silica beads. An Ostwald ripening phenomenon was observed with the increase in hydrothermal treatment time leading to the dissolution of the interior of some beads to form core shell beads or hollow spheres with larger crystals on the outer surface. These ZSM-12 beads/hollow spheres possess higher porous volume than conventional ZSM-12 zeolite powder and can be used directly for industrial applications.
- Open Access
Synthesis of FAU-Type Zeolite Membranes with Antimicrobial Activity
In this study, a layer of a pure and dense phase of FAU-type zeolite was synthesized directly on the surface of α-Al2O3 plane macroporous support. Before hydrothermal synthesis, a step of cleaning of the support by an anionic detergent was performed, a roughness surface is created, allowing the anchoring of the zeolite nuclei and then their growth, favoring in this sense the formation of a homogeneous zeolite layer. The obtained membranes were fully characterized using X-ray diffraction analysis (XRD), nitrogen sorption, scanning electron microscopy (SEM), and mercury porosimetry. After 24 h of thermal treatment at 75 °C, a homogeneous zeolite layer composed of bipyramidal crystals of FAU-type zeolite is obtained with a thickness of about 2.5 µm. No obvious defects or cracks can be observed. It was found that the increase in heating temperature could lead to the appearance of an impurity phase, GIS-type zeolite. Then the ideal zeolite membrane was exchanged with Ag+ or Zn2+ cations to studies their antimicrobial properties. Zeolites membranes exchanged with Ag+ showed an agar-diffusive bactericidal activity against gram negative Escherichia coli (E. coli) bacteria. Zn2+ exchanged zeolite membrane presented a bacteriostatic activity that is less diffusive in agar. As expected, non-exchanged zeolite membrane (in its Na+ form) have no effect on bacterial activity. This process is particularly interesting for the synthesis of a good quality FAU-type zeolite membranes with antimicrobial properties.
Open AccessSynthesis of FAU-Type Zeolite Membranes with Antimicrobial Activity
In this study, a layer of a pure and dense phase of FAU-type zeolite was synthesized directly on the surface of α-Al2O3 plane macroporous support. Before hydrothermal synthesis, a step of cleaning of the support by an anionic detergent was performed, a roughness surface is created, allowing the anchoring of the zeolite nuclei and then their growth, favoring in this sense the formation of a homogeneous zeolite layer. The obtained membranes were fully characterized using X-ray diffraction analysis (XRD), nitrogen sorption, scanning electron microscopy (SEM), and mercury porosimetry. After 24 h of thermal treatment at 75 °C, a homogeneous zeolite layer composed of bipyramidal crystals of FAU-type zeolite is obtained with a thickness of about 2.5 µm. No obvious defects or cracks can be observed. It was found that the increase in heating temperature could lead to the appearance of an impurity phase, GIS-type zeolite. Then the ideal zeolite membrane was exchanged with Ag+ or Zn2+ cations to studies their antimicrobial properties. Zeolites membranes exchanged with Ag+ showed an agar-diffusive bactericidal activity against gram negative Escherichia coli (E. coli) bacteria. Zn2+ exchanged zeolite membrane presented a bacteriostatic activity that is less diffusive in agar. As expected, non-exchanged zeolite membrane (in its Na+ form) have no effect on bacterial activity. This process is particularly interesting for the synthesis of a good quality FAU-type zeolite membranes with antimicrobial properties.
- Open Access
Efficient Removal of Volatile Organic Compounds by FAU-Type Zeolite Coatings
Silicone and pure organic binders were used to develop FAU-type zeolite coatings applied on pre-treated aluminum substrates by using a spraying method and then cured under specific conditions. The influence of the amount of binder on adhesion properties of zeolite coatings was first investigated to determine the optimum ratio between zeolite and binder. Zeolite coatings were then elaborated with a high zeolite content (between 70 and 80 wt.%) to ensure high adsorption capacities. The amount of binders involved in different zeolite coatings was sufficient to achieve interesting adhesion and cohesion properties. The accessibility of zeolite microporosity was studied by nitrogen adsorption-desorption measurements, which revealed a very small or no loss of the micropore volume for the optimized coatings. Volatile Organic Compounds (VOCs) adsorption measurements were carried out using n-hexane as probe molecule. FAU-type zeolite in powder form adsorbs 180 mg/ganhydrous zeolite, whereas the amounts of n-hexane adsorbed by zeolite coatings ranged from 131 to 175 mg/ganhydrous zeolite.
Open AccessEfficient Removal of Volatile Organic Compounds by FAU-Type Zeolite Coatings
Silicone and pure organic binders were used to develop FAU-type zeolite coatings applied on pre-treated aluminum substrates by using a spraying method and then cured under specific conditions. The influence of the amount of binder on adhesion properties of zeolite coatings was first investigated to determine the optimum ratio between zeolite and binder. Zeolite coatings were then elaborated with a high zeolite content (between 70 and 80 wt.%) to ensure high adsorption capacities. The amount of binders involved in different zeolite coatings was sufficient to achieve interesting adhesion and cohesion properties. The accessibility of zeolite microporosity was studied by nitrogen adsorption-desorption measurements, which revealed a very small or no loss of the micropore volume for the optimized coatings. Volatile Organic Compounds (VOCs) adsorption measurements were carried out using n-hexane as probe molecule. FAU-type zeolite in powder form adsorbs 180 mg/ganhydrous zeolite, whereas the amounts of n-hexane adsorbed by zeolite coatings ranged from 131 to 175 mg/ganhydrous zeolite.
- Open Access
Energetic Performance of Pure Silica Zeolites under High-Pressure Intrusion of LiCl Aqueous Solutions: An Overview
An overview of all the studies on high-pressure intrusion—extrusion of LiCl aqueous solutions in hydrophobic pure silica zeolites (zeosils) for absorption and storage of mechanical energy is presented. Operational principles of heterogeneous lyophobic systems and their possible applications in the domains of mechanical energy storage, absorption, and generation are described. The intrusion of LiCl aqueous solutions instead of water allows to considerably increase energetic performance of zeosil-based systems by a strong rise of intrusion pressure. The intrusion pressure increases with the salt concentration and depends considerably on zeosil framework. In the case of channel-type zeosils, it rises with the decrease of pore opening diameter, whereas for cage-type ones, no clear trend is observed. A relative increase of intrusion pressure in comparison with water is particularly strong for the zeosils with narrow pore openings. The use of highly concentrated LiCl aqueous solutions instead of water can lead to a change of system behavior. This effect seems to be related to a lower formation of silanol defects under intrusion of solvated ions and a weaker interaction of the ions with silanol groups of zeosil framework. The influence of zeosil nanostructure on LiCl aqueous solutions intrusion–extrusion is also discussed.
Open AccessEnergetic Performance of Pure Silica Zeolites under High-Pressure Intrusion of LiCl Aqueous Solutions: An Overview
An overview of all the studies on high-pressure intrusion—extrusion of LiCl aqueous solutions in hydrophobic pure silica zeolites (zeosils) for absorption and storage of mechanical energy is presented. Operational principles of heterogeneous lyophobic systems and their possible applications in the domains of mechanical energy storage, absorption, and generation are described. The intrusion of LiCl aqueous solutions instead of water allows to considerably increase energetic performance of zeosil-based systems by a strong rise of intrusion pressure. The intrusion pressure increases with the salt concentration and depends considerably on zeosil framework. In the case of channel-type zeosils, it rises with the decrease of pore opening diameter, whereas for cage-type ones, no clear trend is observed. A relative increase of intrusion pressure in comparison with water is particularly strong for the zeosils with narrow pore openings. The use of highly concentrated LiCl aqueous solutions instead of water can lead to a change of system behavior. This effect seems to be related to a lower formation of silanol defects under intrusion of solvated ions and a weaker interaction of the ions with silanol groups of zeosil framework. The influence of zeosil nanostructure on LiCl aqueous solutions intrusion–extrusion is also discussed.
- Open Access
Influence of the Compensating Cation Nature on the Water Adsorption Properties of Zeolites
The influence of the compensating cation (Na+, Li+, Mg2+) nature on the water adsorption properties of LTA and FAU-type zeolites was investigated. Cation exchanges were performed at 80 °C for 2 h using 1 M aqueous solutions of lithium chloride (LiCl) or magnesium chloride (MgCl2). XRF and ICP-OES analyses indicate that the cation exchange yields reach values between 59 to 89% depending on the number of exchange cycles and the nature of the zeolite and cation, while both zeolites structures are preserved during the process, as shown by XRD and solid state NMR analyses. Nitrogen adsorption-desorption experiments indicate a higher available microporous volume when sodium cations are replaced by smaller monovalent lithium cations or by divalent magnesium cations because twice less cations are needed compared to monovalent cations. Up to 15% of gain in the available microporous volume is obtained for FAU-type zeolites exchanged with magnesium cation. This improvement facilitates the adsorption of water with an increase in the water uptake up to 30% for the LTA and FAU type zeolites exchanged with magnesium. These exchanged zeolites are promising for uses in water decontamination because a smaller amount is needed to trap the same amount of water compared to their sodium counterparts.
Open AccessInfluence of the Compensating Cation Nature on the Water Adsorption Properties of Zeolites
The influence of the compensating cation (Na+, Li+, Mg2+) nature on the water adsorption properties of LTA and FAU-type zeolites was investigated. Cation exchanges were performed at 80 °C for 2 h using 1 M aqueous solutions of lithium chloride (LiCl) or magnesium chloride (MgCl2). XRF and ICP-OES analyses indicate that the cation exchange yields reach values between 59 to 89% depending on the number of exchange cycles and the nature of the zeolite and cation, while both zeolites structures are preserved during the process, as shown by XRD and solid state NMR analyses. Nitrogen adsorption-desorption experiments indicate a higher available microporous volume when sodium cations are replaced by smaller monovalent lithium cations or by divalent magnesium cations because twice less cations are needed compared to monovalent cations. Up to 15% of gain in the available microporous volume is obtained for FAU-type zeolites exchanged with magnesium cation. This improvement facilitates the adsorption of water with an increase in the water uptake up to 30% for the LTA and FAU type zeolites exchanged with magnesium. These exchanged zeolites are promising for uses in water decontamination because a smaller amount is needed to trap the same amount of water compared to their sodium counterparts.