Fabian Krull
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Fabian Krull has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Sergiy Antonyuk
Institute of Particle Process Engineering, University of Kaiserslautern-Landau, 67663 Kaiserslautern, Germany
3 shared publications - Andrii Toporov
Donetsk National Technical University
1 shared publication Donetsk National Technical University
1 shared publication- I.V. Kutniashenko1 shared publication
- M.V. Petriaiev1 shared publication
- Olha Aleksieieva
Donetsk National Technical University
1 shared publication
Latest Publications
- Open Access
Pore-Scale Simulation of the Interaction between a Single Water Droplet and a Hydrophobic Wire Mesh Screen in Diesel
Recently, the trend towards sustainable energy production and pollution control has motivated the increased consumption of ultra-low-sulfur diesel (ULSD) or bio-fuels. Such fuels have relatively low surface tension with water and therefore, the separation of water from fuel has become a challenging problem. The separation process relies on using porous structures for the collection and removal of water droplets. Hence, understanding the interaction between water droplets and the separators is vital. The simplest geometry of a separator is the wire mesh screen, which is used in many modern water–diesel separators. Thus, it is considered here for systematic study. In this work, pore-scale computational fluid dynamics (CFD) simulations were performed using OpenFOAM® (an open-source C++ toolbox for fluid dynamics simulations) coupled with a new accurate scheme for the computation of the surface tension force. First, two validation test cases were performed and compared to experimental observations in corresponding bubble-point tests. Second, in order to describe the interaction between water droplets and wire mesh screens, the simulations were performed with different parameters: mean diesel velocity, open area ratio, fiber radii, Young–Laplace contact angle, and the droplet radius. New correlations were obtained which describe the average reduction of open surface area (clogging), the pressure drop, and retention criteria.
Open AccessPore-Scale Simulation of the Interaction between a Single Water Droplet and a Hydrophobic Wire Mesh Screen in Diesel
Recently, the trend towards sustainable energy production and pollution control has motivated the increased consumption of ultra-low-sulfur diesel (ULSD) or bio-fuels. Such fuels have relatively low surface tension with water and therefore, the separation of water from fuel has become a challenging problem. The separation process relies on using porous structures for the collection and removal of water droplets. Hence, understanding the interaction between water droplets and the separators is vital. The simplest geometry of a separator is the wire mesh screen, which is used in many modern water–diesel separators. Thus, it is considered here for systematic study. In this work, pore-scale computational fluid dynamics (CFD) simulations were performed using OpenFOAM® (an open-source C++ toolbox for fluid dynamics simulations) coupled with a new accurate scheme for the computation of the surface tension force. First, two validation test cases were performed and compared to experimental observations in corresponding bubble-point tests. Second, in order to describe the interaction between water droplets and wire mesh screens, the simulations were performed with different parameters: mean diesel velocity, open area ratio, fiber radii, Young–Laplace contact angle, and the droplet radius. New correlations were obtained which describe the average reduction of open surface area (clogging), the pressure drop, and retention criteria.
- 1 January 2020
- Published by Donetsk National Technical University in Scientific Papers оf DonNTU: Mechanical Engineering and Machine Science
- Vol. 16 (1)
INTEGRATED RESEARCH OF RAW MATERIALS WHEN DESIGNING EFFECTIVE TECHNOLOGICAL EQUIPMENT
Purpose of work: comprehensive study of raw materials. Methodology for performing the work: a combination of computer modeling and experimental research of the processes occurring with the particles of raw material at various stages of technological processing. Methods for calculating ISSN 2308-5312 Наукові праці ДонНТУ. Серія: «Машинобудування і машинознавство». No1(14)’2020 54 the deformation behavior of cylindrical and spherical particles under load with different elastic moduli and using Hertz's expressions and Hooke's law have been developed; creation and description of comparative diagrams of deformation behavior and displacement curves for cylindrical and spherical particles; studies of capillary and viscous forces during particle-particle and particle-wall interactions, when one of the objects has a liquid layer; investigation of the deformation behavior of particles upon impact on a dry surface and a surface with a thin layer of liquid; measuring the dynamic angle of contact between the liquid bridge and the particle; determination of density and structural characteristics of discrete materials; shear tests of bulk materials under various normal loads; studies of residual (transient) flow at various loads of powder materials; compression tests of materials; compaction of bulk materials (tableting) uniaxial compression tests. Scientific novelty: we developed and investigated a mathematical model of deformation and behavior of particles under load; the process of impact of a spherical particle on a dry surface and a surface with a layer of liquid. The relationship between the shape of particles and their ability to resist external influences is revealed. A regularity has been established that shows how the presence of a liquid layer on the surface of particles significantly affects the interaction between particles. The expediency of combining modeling and experimental research in the study of bulk materials is given. Practical value: the methods of modeling and experimental study of the behavior of material particles under various external influences given in the article are advisable to use in the design and modernization of such equipment as granulators, bins, dispensers, briquetting and tableting presses, pneumatic conveying elements, and the like. The article presents the results of particle behavior studies conducted in the laboratories of the Technical University in the city of Kaiserslautern, Germany, under the DAAD international scientific cooperation program.
- 1 January 2020
- Published by Donetsk National Technical University in Scientific Papers оf DonNTU: Mechanical Engineering and Machine Science
- Vol. 16 (1)
INTEGRATED RESEARCH OF RAW MATERIALS WHEN DESIGNING EFFECTIVE TECHNOLOGICAL EQUIPMENT
Purpose of work: comprehensive study of raw materials. Methodology for performing the work: a combination of computer modeling and experimental research of the processes occurring with the particles of raw material at various stages of technological processing. Methods for calculating ISSN 2308-5312 Наукові праці ДонНТУ. Серія: «Машинобудування і машинознавство». No1(14)’2020 54 the deformation behavior of cylindrical and spherical particles under load with different elastic moduli and using Hertz's expressions and Hooke's law have been developed; creation and description of comparative diagrams of deformation behavior and displacement curves for cylindrical and spherical particles; studies of capillary and viscous forces during particle-particle and particle-wall interactions, when one of the objects has a liquid layer; investigation of the deformation behavior of particles upon impact on a dry surface and a surface with a thin layer of liquid; measuring the dynamic angle of contact between the liquid bridge and the particle; determination of density and structural characteristics of discrete materials; shear tests of bulk materials under various normal loads; studies of residual (transient) flow at various loads of powder materials; compression tests of materials; compaction of bulk materials (tableting) uniaxial compression tests. Scientific novelty: we developed and investigated a mathematical model of deformation and behavior of particles under load; the process of impact of a spherical particle on a dry surface and a surface with a layer of liquid. The relationship between the shape of particles and their ability to resist external influences is revealed. A regularity has been established that shows how the presence of a liquid layer on the surface of particles significantly affects the interaction between particles. The expediency of combining modeling and experimental research in the study of bulk materials is given. Practical value: the methods of modeling and experimental study of the behavior of material particles under various external influences given in the article are advisable to use in the design and modernization of such equipment as granulators, bins, dispensers, briquetting and tableting presses, pneumatic conveying elements, and the like. The article presents the results of particle behavior studies conducted in the laboratories of the Technical University in the city of Kaiserslautern, Germany, under the DAAD international scientific cooperation program.
- Open Access
- 30 June 2017
- Published by EDP Sciences in EPJ Web of Conferences
- Vol. 140, 13011
Dynamic interactions of polystyrene particles with microstructured surface manufactured by cold spray
EPJ Web of Conferences, open-access proceedings in physics and astronomy
- 30 June 2017
- Published by EDP Sciences in EPJ Web of Conferences
- Vol. 140, 13011
Open AccessDynamic interactions of polystyrene particles with microstructured surface manufactured by cold spray
EPJ Web of Conferences, open-access proceedings in physics and astronomy
- 29 August 2016
- Published by Wiley in Chemie Ingenieur Technik
- Vol. 88 (9) , 1353
Einfluss der Bauteiloberflächenstrukturierung auf das Stoßverhalten von Partikeln
- 29 August 2016
- Published by Wiley in Chemie Ingenieur Technik
- Vol. 88 (9) , 1353
Einfluss der Bauteiloberflächenstrukturierung auf das Stoßverhalten von Partikeln