Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rafal Marek Wojciechowski has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Modelling electromagnetic fields in a two-phase system with Gramme coils for application in magnetic hyperthermia research

    by Rafal M. Wojciechowski, Andrzej Skumiel, Milena Kurzawa, Krzysztof Kowalski, Paweł Idziak

    The paper presents the results of research related to the design, construction, and implementation of a laboratory setup for the analysis of magnetic hyperthermia generated by a rotating magnetic field (RMF). To designing the magnetic hyperthermia system, a 3D field model was developed using the complex potential method Ω- T 0 and Finite Element Method. Based on the developed field model, the distributions of the magnetic field intensity vector were determined as a function of the current amplitude values within the working area of the system, and the integral parameters of the system were specified, including its resistances and self-inductance as well as mutual inductance. Subsequently, based on the obtained parameter values, a circuit model of the power and control system was developed and implemented. The circuit model was implemented using the LTspice software. Finally, physical tests of the system were conducted, and the measurement results obtained in the constructed prototype system were illustrated.

  • Open Access

    Improved equivalent circuit representation of air-core transformer for higher-frequency operation

    by Milena Kurzawa, Rafał M. Wojciechowski, Paweł Idziak

    Purpose: The purpose of this work is to develop an improved equivalent circuit model for air-core transformers operating at higher frequencies. By refining the classical Cauer-based representation, this study aims to achieve more accurate impedance and current behavior over a wide frequency range, with particular emphasis on improving low-frequency performance. Design/methodology/approach: This research uses a full field-circuit modeling approach. Initially, a finite element method (FEM) of coupled coils is formulated to capture electromagnetic interactions. These complex matrix equations are then reduced using the Padé via Lanczos (PvL) method, which accurately approximates the frequency response while significantly lowering the computational order. Based on the reduced model, impedance characteristics are determined for both magnetizing and horizontal branches. A modified circuit structure is then proposed and rigorously validated by comparing its performance − specifically impedance characteristics and current waveforms − against field-model simulations under various load conditions. Findings: The analysis demonstrates that the classical equivalent circuit fails to accurately reproduce the impedance behavior of the magnetizing branch at lower frequencies. The proposed modified structure rectifies this, achieving significantly better agreement with results of field-model. Simulation results confirm that the proposed equivalent circuit in the more accurately replicates both the amplitude and phase of load currents, eliminating the discrepancies found in the classical model. Originality/value: This study identifies a limitation of the classical Cauer-based representation of the magnetizing branch in air-core transformers, related to its improper low-frequency behavior. It is shown that the traditional structure does not satisfy the zero-pulsation boundary condition, leading to a non-zero remainder in the PvL approximation and reduced modeling accuracy at low frequencies. To overcome this issue, a physically consistent modification is proposed by introducing an additional resistance R0 into the magnetizing branch. By combining field-based parameter extraction with PvL reduction, the method preserves computational efficiency while significantly improving low-frequency accuracy, providing a reliable tool for wide-frequency analysis of higher-frequency coupled systems.

  • Open Access

    Application of the Padé via Lanczos Method for Efficient Modeling of Magnetically Coupled Coils in Wireless Power Transfer Systems

    by Milena Kurzawa, Rafał M. Wojciechowski

    This paper presents a method for determining the equivalent circuit parameters of magnetically coupled air-core coils used in wireless power transfer (WPT) systems. The proposed approach enables fast and accurate modeling of inductively coupled energy transfer structures, which is essential for the design and optimization of high-efficiency wireless energy systems. The equivalent circuit of the analyzed system was developed using Cauer circuits, while a two-dimensional (2D) axisymmetric electromagnetic field model was employed to derive the equations. The model was implemented in proprietary software based on the edge-element finite element method (FEM) using the A–V formulation. The A–V formulation combines the magnetic vector potential A and the electric scalar potential V, enabling simultaneous representation of magnetic field distribution and current flow in conducting regions. The eddy currents in the conductors were considered in the electromagnetic field analysis. Simulations were carried out for two operating states: short-circuit and idle. The results were used to determine the parameters of the horizontal and magnetizing branches of the equivalent circuit of considered system and to analyze the frequency dependence of the resistances and inductances of the coupled coil system. The proposed modeling approach provides an effective and energy-oriented tool for the design of wireless power transfer systems with improved efficiency and reduced computational cost. The proposed method reproduces impedance characteristics with an accuracy of 0.2 × 10−3% in the idle state and 1.4 × 10−3% in the short-circuit state compared to the full FEM model, while significantly reducing the computation time.

  • Open Access

    Application of the Salp Swarm Algorithm to Optimal Design of Tuned Inductive Choke

    by Łukasz Knypiński, Milena Kurzawa, Rafał Wojciechowski, Michał Gwóźdź

    The article presents an algorithm and optimization software designed for the optimal configuration of a tuned inductive choke. The optimization software consists of two main parts: an optimization procedure and a mathematical model for the designed electromagnetic devices. A lumped-parameters model of a tuned inductive choke was developed, with the device’s structure described by three design variables. As an optimality criterion, the multi-objective compromise function was adopted. The objective function merges the total inductances of the electromagnetic device under different operation states. The optimized structure was analyzed using the finite element method. The developed lumped-parameters model is characterized by good accuracy and can be successfully applied to optimize tuned inductive chokes for various rated parameters. The optimization procedure was adapted to the tuned inductive choke model by appropriately selecting the characteristic coefficient of the salp swarm algorithm. The reliability of the optimization software was verified through experimental measurements.


  • Application of the modified approach of Finite Element Method for determining the displacement current distribution in nonlinear magnetic circuits

    by Wojciech Ludowicz, Rafał M. WOJCIECHOWSKI

    Wydawnictwo SIGMA-NOT wydaje czasopisma fachowe informujące swoich czytelników o najnowszych osiągnięciach naukowych i nowoczesnych rozwiązaniach technicznych w Polsce i na świecie, popularyzuje problemy techniczne oraz poszerza wiedzę i kulturę techniczną.

  • Open Access

    Experimental Assessment of Suitability of Darrieus and Savonius Turbines for Obtaining Wind Energy from Passing Vehicles

    by Wiesław Łyskawiński, Krzysztof Kowalski, Rafał M. Wojciechowski

    The article deals with the results of a comparative analysis carried out on the construction of wind turbines applied in energy generation systems using the wind of passing vehicles. The structures of turbines with horizontal and vertical axes of rotation were considered. Vertical axis wind turbines (VAWTs) have been observed to operate in various wind directions, including highly turbulent winds. Therefore, for further experimental research, VAWTs have been selected, i.e., Darrieus and Savonius turbines and their modifications. For the purpose of experimental research, the authors developed and implemented their own laboratory setup. This setup enabled the measurement of quantities such as torque, power, and power coefficient and allowed for the determination of the start-up parameters of the investigated turbines. Moreover, as part of the research, wind speed was also measured in field conditions at a distance of 1 m from the expressway. The wind speed obtained from passing vehicles did not exceed 9 m/s. For this reason, the tests of the considered turbines using the experimental setup were performed for wind speeds in the range of 5.8–8.6 m/s. The investigations were conducted based on the obtained results, and it was concluded that the helical Savonius turbine possessed the highest efficiency (0.2047 from a wind speed of 5.8 m/s) in generating energy from the wind produced by vehicles traveling on roads.


  • System automatycznej regulacji napięcia (LVRSys) przewidziany do pracy w sieciach niskiego napięcia

    by Filip Staszak, Andrzej Książkiewicz, Rafał M. WOJCIECHOWSKI

    W artykule omówiono problematykę związaną z utrzymaniem odpowiedniego poziomu napięć w sieciach niskiego napięcia (nn) Przedstawiono także powszechnie stosowane układy stosowane w systemach regulacji napięcia sieci nn, z szczególnym uwzględnieniem układu automatycznej regulacji LVRSys opracowanym przez firmę A. Eberle GmbH. W ramach realizowanych badań, w pracy przedstawiono analizę stanów pracy ww. systemu LVRSys dla rożnych charakterów odbiorników sieci. Omówiona została także budowa systemu automatycznej regulacji, a także omówiono opracowany model numeryczny rozpatrywanego systemu LVRSys opracowany w środowisku Matlab/Simulink

  • Open Access

    Coupled Field Analysis of Phenomena in Hybrid Excited Magnetorheological Fluid Brake

    by Wojciech Szelag, Cezary Jedryczka, Adam Myszkowski, Rafal M. Wojciechowski

    The paper presents a field model of coupled phenomena occurring in an axisymmetric magnetorheological brake. The coupling between transient fluid dynamics and electromagnetic and thermal fields as well as mechanical equilibrium equations is taken into account. The magnetic field in the studied brake is of an excited hybrid manner, i.e., by the permanent magnets (PMs) and current Is in the excitation winding. The finite element method and a step-by-step algorithm have been implemented in the proposed field model of coupled phenomena in the considered brake. The nonlinearity of the magnetic circuit and rheological properties of a magnetorheological fluid (MR fluid) as well as the influence of temperature on the properties of materials have been taken into account. To solve equations of the obtained field model, the Newton–Raphson method and the coupled block over-relaxation method have been implemented. The elaborated algorithm has been successfully used in the analysis of the phenomena in the considered magnetorheological brake. The accuracy of the developed model and its usefulness have been verified by a comparative analysis of the results of simulation and laboratory tests carried out for the developed prototype of the studied brake.


  • Open Access

    Possibility of using a tuned inductor in a power device to improve the quality of electricity

    by Michał Gwóźdź, Rafał M. Wojciechowski

    This work focuses on the concept of operation and possibility of using a tuned inductor in electrical power systems with adaptive features. The idea presented here for the operation of the inductor is a new approach to the design of such devices. An example of a power adaptive system is a device for improving the quality of electricity. The negative impact of nonlinear loads on the operation of a power grid is a well-documented phenomenon. Hence, various types of “compensators” for reactive power, or for both reactive and distortion power, are used in electrical systems as a preventive measure. The concept of an inductor presented here offers wider possibilities for power compensation in power supply systems, compared to traditional solutions involving compensators based on fixed inductors. The use of the proposed solution in an adaptive compensator is only one example of its possible implementation in the area of power devices. In this work, we discuss the structure of the compensator, the basic aspects of the operation of the inductor, the results of simulation studies and the results of measurements obtained from a prototype.