Chaobo Tang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chaobo Tang has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Yongming Chen
School of Metallurgy and Environment, Central South University, Changsha, China
13 shared publications - Shenghai Yang
Central South University
6 shared publications Shenghai Yang
School of Metallurgy and Environment, Central South University, Changsha, Hunan 410083, P.R China
5 shared publicationsYun Li
School of Metallurgy and Environment, Central South University, Changsha, Hunan 410083, P.R China
5 shared publications- Ari Jokilaakso
Department of Chemical and Metallurgical Engineering, School of Chemical Engineering, Aalto University, Espoo, Finland
4 shared publications - Changhong Wang
School of Metallurgy and Environment, Central South University, Changsha, China
4 shared publications
Latest Publications
- 1 March 2025
- Published by Springer Nature in Journal of Central South University
- Vol. 32 (3) , 837-852
Mechanism and application of seed-induced goethite crystal growth for iron removal from rich-zinc solution
- 1 March 2025
- Published by Springer Nature in Journal of Central South University
- Vol. 32 (3) , 837-852
Mechanism and application of seed-induced goethite crystal growth for iron removal from rich-zinc solution
- 7 June 2024
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 12 (25) , 9376-9392
Green Extraction of Metallic Bismuth from Bismuth Sulfide Concentrate via Reductive Sulfur-Fixed Smelting
- 7 June 2024
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 12 (25) , 9376-9392
Green Extraction of Metallic Bismuth from Bismuth Sulfide Concentrate via Reductive Sulfur-Fixed Smelting
- 11 March 2024
- Published by Springer Nature in JOM
- Vol. 76 (7) , 3385-3392
Clean and Efficient Recovery of Valuable Metals from Bismuth Sulfide Concentrate by Low-Temperature Alkaline Smelting
- 11 March 2024
- Published by Springer Nature in JOM
- Vol. 76 (7) , 3385-3392
Clean and Efficient Recovery of Valuable Metals from Bismuth Sulfide Concentrate by Low-Temperature Alkaline Smelting
- Open Access
Interfacial Adsorption Mechanism of Diethyldithiocarbamate in High-Sulfur Residue Flotation
Diethyldithiocarbamate (DDTC) is employed in the sulfide ore flotation process due to its excellent collection performance. Herein, we investigated the interfacial adsorption behavior of DDTC on the four main mineral phases of high-sulfur residue: sulfur, pyrite, sphalerite, and lead sulfate. The adsorption behavior of DDTC and H2O, namely, the adsorption structure and the energy and electron localization function cross section, were explored using density function theory calculation. The results were helpful in constructing a coadsorption model of DDTC and H2O, which was validated by pure mineral flotation and characterization of Fourier transform infrared spectra. The coadsorption model indicated that the adsorption of DDTC on sulfur, sphalerite, and lead sulfate was weak with physical bonding, while its adsorption on pyrite was strong with chemical bonding. Practical bench-scale high-sulfur residue flotation was performed, and the result was different from that obtained from pure mineral flotation. Our developed model predictions and mineral fugacity pattern analysis were synergistically used to explain this difference. Overall, this work proposes for the first time a coadsorption model of DDTC and H2O and provides important insights into interfacial adsorption in high-sulfur residue flotation.
Open AccessInterfacial Adsorption Mechanism of Diethyldithiocarbamate in High-Sulfur Residue Flotation
Diethyldithiocarbamate (DDTC) is employed in the sulfide ore flotation process due to its excellent collection performance. Herein, we investigated the interfacial adsorption behavior of DDTC on the four main mineral phases of high-sulfur residue: sulfur, pyrite, sphalerite, and lead sulfate. The adsorption behavior of DDTC and H2O, namely, the adsorption structure and the energy and electron localization function cross section, were explored using density function theory calculation. The results were helpful in constructing a coadsorption model of DDTC and H2O, which was validated by pure mineral flotation and characterization of Fourier transform infrared spectra. The coadsorption model indicated that the adsorption of DDTC on sulfur, sphalerite, and lead sulfate was weak with physical bonding, while its adsorption on pyrite was strong with chemical bonding. Practical bench-scale high-sulfur residue flotation was performed, and the result was different from that obtained from pure mineral flotation. Our developed model predictions and mineral fugacity pattern analysis were synergistically used to explain this difference. Overall, this work proposes for the first time a coadsorption model of DDTC and H2O and provides important insights into interfacial adsorption in high-sulfur residue flotation.
- Open Access
- 7 April 2023
- Published by MDPI AG in Preprints.org
Interfacial Adsorption Mechanism of Diethyldithiocarbamate in High-Sulfur Residue Flotation
Diethyldithiocarbamate (DDTC) has been employed in the sulfide ore flotation process, due to its excellent collection performance. Herein, we investigated the interfacial adsorption behavior of DDTC on four mineral phases of high-sulfur residue — sulfur, pyrite, sphalerite and lead sulfate. The adsorption behavior — adsorption structure and energy and electron localization function cross section — of DDTC and H2O were explored using density function theory calculation. The result was helpful to construct a co-adsorption model of DDTC and H2O, which was validated by the pure minerals flotation operation and the characterization of fourier transform infrared spectra. The co-adsorption model indicated that the DDTC adsorption on the sulfur, sphalerite and lead sulfate was weak with physical bonding, while its adsorption on the pyrite was strong with chemical bonding. Practical bench-scale operation of high-sulfur residue flotation was performed, whose result was different from that obtained from the pure mineral flotation. To explain the difference, our developed model predictions and the mineral fugacity pattern analysis on the high-sulfur residue flotation were synergistically used. Overall, this work first proposed the co-adsorption model of DDTC and H2O and provided important insights into the interfacial adsorption in the high-sulfur residue flotation.
- 7 April 2023
- Published by MDPI AG in Preprints.org
Open AccessInterfacial Adsorption Mechanism of Diethyldithiocarbamate in High-Sulfur Residue Flotation
Diethyldithiocarbamate (DDTC) has been employed in the sulfide ore flotation process, due to its excellent collection performance. Herein, we investigated the interfacial adsorption behavior of DDTC on four mineral phases of high-sulfur residue — sulfur, pyrite, sphalerite and lead sulfate. The adsorption behavior — adsorption structure and energy and electron localization function cross section — of DDTC and H2O were explored using density function theory calculation. The result was helpful to construct a co-adsorption model of DDTC and H2O, which was validated by the pure minerals flotation operation and the characterization of fourier transform infrared spectra. The co-adsorption model indicated that the DDTC adsorption on the sulfur, sphalerite and lead sulfate was weak with physical bonding, while its adsorption on the pyrite was strong with chemical bonding. Practical bench-scale operation of high-sulfur residue flotation was performed, whose result was different from that obtained from the pure mineral flotation. To explain the difference, our developed model predictions and the mineral fugacity pattern analysis on the high-sulfur residue flotation were synergistically used. Overall, this work first proposed the co-adsorption model of DDTC and H2O and provided important insights into the interfacial adsorption in the high-sulfur residue flotation.
- Open Access
Anodic Behavior of Hafnium in Anhydrous Electrodissolution-Coupled Hafnium Alkoxide Synthesis
The electrodissolution-coupled hafnium alkoxide (Hf(OR)4, R is alkyl) synthesis (EHS) system, which has significant environmental and economic advantages over conventional thermal methods, serves as a promising system for green and efficient Hf(OR)4 electro-synthesis. The EHS system is operated based on the simultaneous heterogeneous reactions of hafnium dissolution and ethanol dehydrogenation, as well as the spontaneous solution-based reaction of Hf4+ and OR−. Employing green ethanol and Hf as feedstocks, the anodic hafnium corrosion/dissolution electrochemical behavior of the Et4NCl or Et4NHSO4 based anhydrous system was investigated through electrochemical measurements combined with SEM observations. The results demonstrated that the Et4NCl-based anhydrous ethanol system exhibited an efficient mechanism of passive film pitting corrosion breakdown and metal hafnium dissolution, while the Et4NHSO4-based anhydrous ethanol system reflected the weak corrosion mechanism of the anodic hafnium under the passive film. The polarization resistance of the Et4NCl system was dramatically lower than that of the Et4NHSO4 system, which indicated that the Et4NCl system had superior anodic hafnium corrosion performance compared to the Et4NHSO4 system. Overall, the investigation of the electrochemical behaviors of anodic hafnium corrosion/dissolution provides theoretical guidance for the efficient operation of EHS electrolysis.
Open AccessAnodic Behavior of Hafnium in Anhydrous Electrodissolution-Coupled Hafnium Alkoxide Synthesis
The electrodissolution-coupled hafnium alkoxide (Hf(OR)4, R is alkyl) synthesis (EHS) system, which has significant environmental and economic advantages over conventional thermal methods, serves as a promising system for green and efficient Hf(OR)4 electro-synthesis. The EHS system is operated based on the simultaneous heterogeneous reactions of hafnium dissolution and ethanol dehydrogenation, as well as the spontaneous solution-based reaction of Hf4+ and OR−. Employing green ethanol and Hf as feedstocks, the anodic hafnium corrosion/dissolution electrochemical behavior of the Et4NCl or Et4NHSO4 based anhydrous system was investigated through electrochemical measurements combined with SEM observations. The results demonstrated that the Et4NCl-based anhydrous ethanol system exhibited an efficient mechanism of passive film pitting corrosion breakdown and metal hafnium dissolution, while the Et4NHSO4-based anhydrous ethanol system reflected the weak corrosion mechanism of the anodic hafnium under the passive film. The polarization resistance of the Et4NCl system was dramatically lower than that of the Et4NHSO4 system, which indicated that the Et4NCl system had superior anodic hafnium corrosion performance compared to the Et4NHSO4 system. Overall, the investigation of the electrochemical behaviors of anodic hafnium corrosion/dissolution provides theoretical guidance for the efficient operation of EHS electrolysis.
- 31 October 2019
- Published by Springer Nature in JOM
- Vol. 72 (9) , 3186-3194
Recycling of Spent Lead-Acid Battery for Lead Extraction with Sulfur Conservation
- 31 October 2019
- Published by Springer Nature in JOM
- Vol. 72 (9) , 3186-3194
Recycling of Spent Lead-Acid Battery for Lead Extraction with Sulfur Conservation
- Open Access
Cleaner Recycling of Spent Lead-Acid Battery Paste and Co-Treatment of Pyrite Cinder via a Reductive Sulfur-Fixing Method for Valuable Metal Recovery and Sulfur Conservation
This study proposes a cleaner lead-acid battery (LAB) paste and pyrite cinder (PyC) recycling method without excessive generation of SO2. PyCs were employed as sulfur-fixing reagents to conserve sulfur as condensed sulfides, which prevented SO2 emissions. In this work, the phase transformation mechanisms in a PbSO4-Na2CO3-Fe3O4-C reaction system were studied in detail. Furthermore, the co-treatment of spent LAB and PyCs was conducted to determine the optimal recycling conditions and to detect the influences of different processing parameters on lead recovery and sulfur fixation. In addition, a bench-scale experiment was carried out to confirm the feasibility and reliability of this novel process. The results reveal that the products were separated into three distinct layers: slag, ferrous matte, and crude lead. 98.3% of lead and 99% of silver in the feed materials were directly enriched in crude lead. Crude lead with purity of more than 98 wt.% (weight percent) was obtained by a one-step extraction. Lead contents in the produced matte and slag were below 2.7 wt.% and 0.6 wt.%, respectively. At the same time, 99.2% total sulfur was fixed and recovered.
Open AccessCleaner Recycling of Spent Lead-Acid Battery Paste and Co-Treatment of Pyrite Cinder via a Reductive Sulfur-Fixing Method for Valuable Metal Recovery and Sulfur Conservation
This study proposes a cleaner lead-acid battery (LAB) paste and pyrite cinder (PyC) recycling method without excessive generation of SO2. PyCs were employed as sulfur-fixing reagents to conserve sulfur as condensed sulfides, which prevented SO2 emissions. In this work, the phase transformation mechanisms in a PbSO4-Na2CO3-Fe3O4-C reaction system were studied in detail. Furthermore, the co-treatment of spent LAB and PyCs was conducted to determine the optimal recycling conditions and to detect the influences of different processing parameters on lead recovery and sulfur fixation. In addition, a bench-scale experiment was carried out to confirm the feasibility and reliability of this novel process. The results reveal that the products were separated into three distinct layers: slag, ferrous matte, and crude lead. 98.3% of lead and 99% of silver in the feed materials were directly enriched in crude lead. Crude lead with purity of more than 98 wt.% (weight percent) was obtained by a one-step extraction. Lead contents in the produced matte and slag were below 2.7 wt.% and 0.6 wt.%, respectively. At the same time, 99.2% total sulfur was fixed and recovered.
- Open Access
- 16 May 2019
- Published by Springer Nature in JOM
- Vol. 71 (7) , 2368-2379
Spent Lead-Acid Battery Recycling via Reductive Sulfur-Fixing Smelting and Its Reaction Mechanism in the PbSO4-Fe3O4-Na2CO3-C System
- 16 May 2019
- Published by Springer Nature in JOM
- Vol. 71 (7) , 2368-2379
Open AccessSpent Lead-Acid Battery Recycling via Reductive Sulfur-Fixing Smelting and Its Reaction Mechanism in the PbSO4-Fe3O4-Na2CO3-C System
- Open Access
Cleaner Extraction of Lead from Complex Lead-Containing Wastes by Reductive Sulfur-Fixing Smelting with Low SO2 Emission
A novel and cleaner process for lead and silver recycling from multiple lead-containing wastes, e.g., lead ash, lead sludge, lead slag, and ferric sludge, by reductive sulfur-fixing smelting was proposed. In this process, coke and iron-containing wastes were employed as reductive agent and sulfur-fixing agent, respectively. A Na2CO3-Na2SO4 mixture was added as flux. The feasibility of this process was detected from thermodynamic and experimental perspectives. The influence of Fe/SiO2 and CaO/SiO2, composition of the molten salt, coke addition, smelting temperature, and smelting time on direct Pb recovery and sulfur-fixation efficiency were investigated. The optimal process conditions were determined as follows: WCoke = 15% WPb wastes, = 0.7/0.3, Fe/SiO2 = 1.10, CaO/SiO2 = 0.30, smelting temperature 1200 °C, and smelting time 2 h, where W represents weight. Under these optimum conditions, 92.4% Pb and 98.8% Ag were directly recovered in crude lead bullion in one step treatment, and total 98.6% sulfur was fixed. The generation and emissions of SO2 can be avoided. The main phases in ferrous matte obtained were FeS, NaFeS2, Fe2Zn3S5, and a little entrained Pb. The slag was a FeO-SiO2-CaO-Na2O quaternary melt.Open AccessCleaner Extraction of Lead from Complex Lead-Containing Wastes by Reductive Sulfur-Fixing Smelting with Low SO2 Emission
A novel and cleaner process for lead and silver recycling from multiple lead-containing wastes, e.g., lead ash, lead sludge, lead slag, and ferric sludge, by reductive sulfur-fixing smelting was proposed. In this process, coke and iron-containing wastes were employed as reductive agent and sulfur-fixing agent, respectively. A Na2CO3-Na2SO4 mixture was added as flux. The feasibility of this process was detected from thermodynamic and experimental perspectives. The influence of Fe/SiO2 and CaO/SiO2, composition of the molten salt, coke addition, smelting temperature, and smelting time on direct Pb recovery and sulfur-fixation efficiency were investigated. The optimal process conditions were determined as follows: WCoke = 15% WPb wastes, = 0.7/0.3, Fe/SiO2 = 1.10, CaO/SiO2 = 0.30, smelting temperature 1200 °C, and smelting time 2 h, where W represents weight. Under these optimum conditions, 92.4% Pb and 98.8% Ag were directly recovered in crude lead bullion in one step treatment, and total 98.6% sulfur was fixed. The generation and emissions of SO2 can be avoided. The main phases in ferrous matte obtained were FeS, NaFeS2, Fe2Zn3S5, and a little entrained Pb. The slag was a FeO-SiO2-CaO-Na2O quaternary melt.