FMFarshid Maghool

Farshid Maghool

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Farshid Maghool has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Wheel-tracking performance of recycled concrete aggregate with recycled glass and brick in unbound pavements under elevated loads

    by Muditha Senanayake, Arul Arulrajah, Farshid Maghool, Suksun Horpibulsuk

    As natural quarry materials become increasingly scarce and uneconomical, the construction industry has turned to sustainable alternatives such as construction and demolition (C&D) wastes and recycled glass for road construction. The aim of this study was to evaluate the performance of mixtures consisting of recycled glass (RG), crushed brick (CB) and recycled concrete aggregate (RCA) under varied traffic conditions. This assessment was conducted through wheel-tracking (WT) tests under simulated high-traffic conditions, which involved subjecting the mixtures to elevated vertical loads and an increased number of load cycles compared to previous studies. The study revealed that both RCA + 20%RG and RCA + 20%CB blends displayed comparable or slightly greater mean surface deformations than natural crushed rock under default conditions. The default conditions specified by the local road authority include an 8 kN wheel load and 40,000 loading cycles. The study further revealed that both blends displayed a consistent increase in rut depth as the number of cycles increased up to 100,000 while being subjected to a 20 kN wheel load. The maximum rut depth of RCA + 20%RG was close to the lower end of the maximum allowable rut depth range specified by road authorities. This suggests that these blends are at the limits of carrying heavier loads on highly trafficked roads.


  • Open Access

    Engineering Characteristics and Environmental Risks of Utilizing Recycled Aluminum Salt Slag and Recycled Concrete as a Sustainable Geomaterial

    by Youli Lin, Farshid Maghool, Arul Arulrajah, Suksun Horpibulsuk

    Recycled aluminum salt slag (RASS) is an industrial by-product generated from the melting of white dross and aluminum scraps during the secondary smelter process. Insufficient knowledge in the aspects of engineering characteristics, and the environmental risks associated with RASS, is the primary barrier to the utilization of RASS as a substitute material for natural quarry materials in the field of geotechnical construction. In this research, comprehensive geotechnical and environmental engineering tests were conducted to evaluate the feasibility of utilizing RASS as a sustainable geomaterial. This was undertaken by comparing the laboratory testing results for RASS with a well-known recycled material, namely recycled concrete aggregate (RCA), and the relevant specifications set forth by the local road authority. The geotechnical engineering assessment included particle size distribution, flakiness index, organic content, pH, particle density, water absorption, modified Proctor compaction, aggregate impact value, Los Angeles (LA) abrasion, hydraulic conductivity, and California bearing ratio (CBR). The CBR results of the RASS samples satisfied the minimum CBR value (>80%) for usage as pavement subbase material in road construction. In addition, the repeated load triaxial (RLT) tests were carried out on the RASS samples to assess the response of the RASS under cyclic loading conditions. Furthermore, a range of chemical tests, consisting of leaching and polycyclic aromatic hydrocarbon tests, were also performed on the RASS to address the environmental concerns. Comparing the chemical test results with the environmental protection authorities’ guidelines provided satisfactory evidence that RASS will not pose any environmental and health issues throughout its service life as a geotechnical construction material.


  • Open Access

    Permanent Deformation and Rutting Resistance of Demolition Waste Triple Blends in Unbound Pavement Applications

    by Farshid Maghool, Muditha Senanayake, Arul Arulrajah, Suksun Horpibulsuk

    Virgin quarried materials are becoming increasingly scarce in our environment, and these materials are no longer a viable or economical solution for the construction industry. The construction industry is constantly seeking new markets for recycled waste in civil engineering applications. This research’s primary focus is the optimization of the usage of recycled materials such as recycled glass (RG), crushed brick (CB), and crushed concrete (CC), in pavement base/sub-base applications. Various percentages of RG, up to 40%, were blended with two types of CC in this research. The CC and CB, which were used as triple blends in this research, were utilized for the upper (100% CC) and lower sub-bases (up to 50% CB). This study sought to establish the maximum amount of RG that could be incorporated in the triple blends with CB and CC whilst maintaining an acceptable performance. Thus, a comprehensive series of fundamental and advanced geotechnical laboratory tests, including repeated load triaxial (RLT) and wheel-tracker (WT) tests, were performed to assess the engineering properties and permanent deformation characteristics of these triple blends. The particle-size distribution curve and California Bearing Ratio (CBR) values of all the blends met the minimum requirements. Results of RLT tests confirmed that all the nominated blends were found to provide the resilient modulus value required to be used as pavement materials. The WT results on the triple blend with 15% RG showed that the specimen performed exceptionally well during the test and comfortably met the requirements to be used in pavement applications. Based on the engineering properties and permanent deformation results, up to 15% RG can be suggested for incorporation as an accompanying material in unbound roadwork applications. Subject to the outcomes of future field testing, there might be potential to increase the percentage of RG added in the blends up to 30%.


  • Open Access

    Amazing Types, Properties, and Applications of Fibres in Construction Materials

    by Abbas Mohajerani, Siu-Qun Hui, Mehdi Mirzababaei, Arul Arulrajah, Suksun Horpibulsuk, Aeslina Abdul Kadir, Tareq Rahman, Farshid Maghool

    Fibres have been used in construction materials for a very long time. Through previous research and investigations, the use of natural and synthetic fibres have shown promising results, as their presence has demonstrated significant benefits in terms of the overall physical and mechanical properties of the composite material. When comparing fibre reinforcement to traditional reinforcement, the ratio of fibre required is significantly less, making fibre reinforcement both energy and economically efficient. More recently, waste fibres have been studied for their potential as reinforcement in construction materials. The build-up of waste materials all around the world is a known issue, as landfill space is limited, and the incineration process requires considerable energy and produces unwanted emissions. The utilisation of waste fibres in construction materials can alleviate these issues and promote environmentally friendly and sustainable solutions that work in the industry. This study reviews the types, properties, and applications of different fibres used in a wide range of materials in the construction industry, including concrete, asphalt concrete, soil, earth materials, blocks and bricks, composites, and other applications.


  • The Influence of a Curing Regime on the Geotechnical Properties of Ladle Furnace Slag as Used in Pavement Applications

    by Farshid Maghool, Arul Arulrajah, Hamed Haghighi, Suksun Horpibulsuk, Yan-Jun Du

    Ladle furnace slag (LFS) is a solid waste by-product from the secondary stage of steel making process in ladle refining furnace. An extensive suite of engineering and geotechnical tests was undertaken on LFS aggregates to evaluate its potential to use as a road construction material. The chemical composition and microstructure of LFS samples were evaluated using X-ray fluorescence analysis (XRF) and scanning electron microscopy (SEM). The effect of different curing regimes on the strength of unbound LFS was also investigated. It was found that both duration and temperature of the curing had a vital role in the strength development of LFS samples, which could be attributed to the relatively high lime content of the LFS material. The suitable engineering properties of LFS materials could make it a reliable substitute for quarry produced pavement materials, which may result in diverting large amount of LFS from landfills.


  • Environmental impacts of utilizing waste steel slag aggregates as recycled road construction materials

    by Farshid Maghool, Arul Arulrajah, Yan-Jun Du, Suksun Horpibulsuk, Avirut Chinkulkijniwat