Jan Christof Balzer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jan Christof Balzer has a total of 295 co-authors. Here are the top co-authors by number of shared publications:
Martin Koch
Department of Physics and Material Science Center, Philipps-Universität Marburg, Renthof 5, 35032, Marburg, Germany
26 shared publications- Martin Rudolf Hofmann
Photonics and Terahertz Technology Ruhr University Bochum Bochum Germany
20 shared publications M. Koch
Faculty of Physics, Philipps-Universität Marburg, Renthof 5, Marburg, 35032, Germany
15 shared publicationsAndreas Klehr
Ferdinand-Braun-Institut, Leibniz-Institut für Höchstfrequenztechnik im Forschungsverband Berlin e.V., D-12489 Berlin, Germany
10 shared publications- Carsten Brenner
Photonics and Terahertz Technology, Ruhr University Bochum, Bochum, Germany
9 shared publications - Kevin Kolpatzeck
University of Duisburg-Essen
9 shared publications
Latest Publications
- Open Access
- 7 October 2026
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 68 (10)
Lego‐Like Terahertz Transmission Grating With Variable Blaze Angle
This paper introduces a novel terahertz (THz) transmission grating featuring a variable blaze angle, which is fabricated using a Lego‐like assembly of rectangular cuboids. This innovative approach leverages the flexibility and cost‐effectiveness of 3D printing, utilizing polymers with low absorption in the THz frequency range. Our design extends the concept of traditional blazed gratings, which have fixed blaze angles, by enabling an adjustable blaze angle to optimize diffraction efficiency for various applications. Theoretical analysis and calculations of the rectangular diffractive elements demonstrate the feasibility and performance of the proposed grating. This configurable diffraction grating holds significant potential for enhancing the capabilities of THz systems, offering a versatile and low‐cost solution for industrial and commercial THz applications.
- 7 October 2026
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 68 (10)
Open AccessLego‐Like Terahertz Transmission Grating With Variable Blaze Angle
This paper introduces a novel terahertz (THz) transmission grating featuring a variable blaze angle, which is fabricated using a Lego‐like assembly of rectangular cuboids. This innovative approach leverages the flexibility and cost‐effectiveness of 3D printing, utilizing polymers with low absorption in the THz frequency range. Our design extends the concept of traditional blazed gratings, which have fixed blaze angles, by enabling an adjustable blaze angle to optimize diffraction efficiency for various applications. Theoretical analysis and calculations of the rectangular diffractive elements demonstrate the feasibility and performance of the proposed grating. This configurable diffraction grating holds significant potential for enhancing the capabilities of THz systems, offering a versatile and low‐cost solution for industrial and commercial THz applications.
- Open Access
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 6 (5) , 1238-1251
100 μm Resolution Terahertz Imaging via Inverse Spherical Synthetic Aperture Radar Imaging by Terahertz Time-Domain Spectroscopy
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 6 (5) , 1238-1251
Open Access100 μm Resolution Terahertz Imaging via Inverse Spherical Synthetic Aperture Radar Imaging by Terahertz Time-Domain Spectroscopy
- Open Access
- 9 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Radar Systems
- Vol. 4, 787-798
Augmenting Smoke Detection Systems via Radar and Deep Learning for Continuous Hazard and Condition Monitoring: A Multispectral Analysis
Traditional smoke detection systems share inherent limitations. Inter alia, these systems are fundamentally limited by their purely reactive and non-predictive operation. The objective of this contribution is to extend the advantageous probing capabilities of radar systems toward the augmentation of traditional smoke detectors for continuous condition and hazard monitoring. Particular emphasis is placed here on early-stage hazards and critical precursor conditions for preventive fire safety. To this end, static-target radar echoes are classified using deep learning (DL) methods by extracting characteristic patterns caused by subtle changes in the surrounding medium (e.g., water vapor). Measurements were conducted employing ultra-wideband frequency-modulated continuous-wave (FMCW) radar systems operating from 80 GHz to 240 GHz, in a controlled indoor proof-of-concept setup, enabling a systematic multispectral analysis. Several scenarios representative of domestic settings were considered, including the frying of a burger patty (UL 268 standard). The proposed concept achieves classification accuracies of more than 90%, even under strong restrictions. The developed models remain lightweight and fast, well suited for embedded implementations.
- 9 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Radar Systems
- Vol. 4, 787-798
Open AccessAugmenting Smoke Detection Systems via Radar and Deep Learning for Continuous Hazard and Condition Monitoring: A Multispectral Analysis
Traditional smoke detection systems share inherent limitations. Inter alia, these systems are fundamentally limited by their purely reactive and non-predictive operation. The objective of this contribution is to extend the advantageous probing capabilities of radar systems toward the augmentation of traditional smoke detectors for continuous condition and hazard monitoring. Particular emphasis is placed here on early-stage hazards and critical precursor conditions for preventive fire safety. To this end, static-target radar echoes are classified using deep learning (DL) methods by extracting characteristic patterns caused by subtle changes in the surrounding medium (e.g., water vapor). Measurements were conducted employing ultra-wideband frequency-modulated continuous-wave (FMCW) radar systems operating from 80 GHz to 240 GHz, in a controlled indoor proof-of-concept setup, enabling a systematic multispectral analysis. Several scenarios representative of domestic settings were considered, including the frying of a burger patty (UL 268 standard). The proposed concept achieves classification accuracies of more than 90%, even under strong restrictions. The developed models remain lightweight and fast, well suited for embedded implementations.
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- p. 1-17
Terahertz Radars and Sensors: Transitions from Fundamentals to Practical Applications
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- p. 1-17
Open AccessTerahertz Radars and Sensors: Transitions from Fundamentals to Practical Applications
- Open Access
- 30 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 186564-186572
Continuous Permittivity Tuning From 4 to 34 Using Low-Loss 3D-Printed Al 2 O 3 and ZrO 2 for THz-Range Applications
In this contribution the influence of the porosity on 3D-printed ceramics, specifically Al2O3 and ZrO2, in terms of dielectric properties is analyzed at THz frequencies. By varying the porosity, i.e. the amount of air in the ceramic parts, an effective medium approach can be applied to tailor the material properties, such as the relative permittivity, over a wide range. Ceramics are fabricated using the lithography-based ceramic manufacturing (LCM) method, where printed green bodies are subjected to debinding and sintering to form the desired ceramic components. Here, the sintering temperature has a direct influence on the sample porosity and thus on its permittivity. Using this temperature variation concept, a relative permittivity tuning between 4.3 - 34.2 is demonstrated using a multi material approach including low loss Al2O3 as well as ZrO2. Depending on the sample processing, the ceramic exhibits birefringence effects, which are investigated in dependence of sintering temperature.
- 30 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 186564-186572
Open AccessContinuous Permittivity Tuning From 4 to 34 Using Low-Loss 3D-Printed Al 2 O 3 and ZrO 2 for THz-Range Applications
In this contribution the influence of the porosity on 3D-printed ceramics, specifically Al2O3 and ZrO2, in terms of dielectric properties is analyzed at THz frequencies. By varying the porosity, i.e. the amount of air in the ceramic parts, an effective medium approach can be applied to tailor the material properties, such as the relative permittivity, over a wide range. Ceramics are fabricated using the lithography-based ceramic manufacturing (LCM) method, where printed green bodies are subjected to debinding and sintering to form the desired ceramic components. Here, the sintering temperature has a direct influence on the sample porosity and thus on its permittivity. Using this temperature variation concept, a relative permittivity tuning between 4.3 - 34.2 is demonstrated using a multi material approach including low loss Al2O3 as well as ZrO2. Depending on the sample processing, the ceramic exhibits birefringence effects, which are investigated in dependence of sintering temperature.
- Open Access
- 22 October 2025
- Published by Springer Nature in Journal of Infrared, Millimeter, and Terahertz Waves
- Vol. 46 (11) , 1-11
High-Speed 1 THz Photonic Continuous Wave Phase-Sensitive Radar with Micrometer Precision
This paper presents a high-speed photonic continuous wave phase sensitive radar system operating at 1 THz with a measurement rate of 20 kHz and micrometer precision. The system utilizes a monolithic dual-mode distributed feedback laser with a Y-shaped cavity, featuring rapid individual tunability of the modes via current modulation. This design generates a narrowband frequency-modulated beat signal for phase sampling, while additionally featuring a high potential for photonic integration. The laser’s wavelength modulation dynamics are thoroughly analyzed, and the THz radar system performance is characterized using a reflection target mounted on a motorized stage. The system achieves a precision of 2.6 cm for absolute positioning and 0.88 $$\upmu $$ m for relative position changes with a measurement rate of 20 kHz. The high measurement rate and micrometer precision are demonstrated in a possible field of application by sampling the position of a small metal plate mounted on a loudspeaker membrane playing up to 1 kHz of acoustic frequencies, while this target is concealed behind an optically opaque barrier.- 22 October 2025
- Published by Springer Nature in Journal of Infrared, Millimeter, and Terahertz Waves
- Vol. 46 (11) , 1-11
Open AccessHigh-Speed 1 THz Photonic Continuous Wave Phase-Sensitive Radar with Micrometer Precision
This paper presents a high-speed photonic continuous wave phase sensitive radar system operating at 1 THz with a measurement rate of 20 kHz and micrometer precision. The system utilizes a monolithic dual-mode distributed feedback laser with a Y-shaped cavity, featuring rapid individual tunability of the modes via current modulation. This design generates a narrowband frequency-modulated beat signal for phase sampling, while additionally featuring a high potential for photonic integration. The laser’s wavelength modulation dynamics are thoroughly analyzed, and the THz radar system performance is characterized using a reflection target mounted on a motorized stage. The system achieves a precision of 2.6 cm for absolute positioning and 0.88 $$\upmu $$ m for relative position changes with a measurement rate of 20 kHz. The high measurement rate and micrometer precision are demonstrated in a possible field of application by sampling the position of a small metal plate mounted on a loudspeaker membrane playing up to 1 kHz of acoustic frequencies, while this target is concealed behind an optically opaque barrier. - Open Access
- 27 March 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-23
Perspectives on terahertz honey bee sensing
Terahertz (THz) technology provides precise monitoring capabilities in dynamic environments, offering unique insights into insect habitats. Our study focuses on environmental monitoring of European honey bees (Apis mellifera) through a combination of measurements and simulations. Initially, the dielectric material properties of honey bee body parts are characterized across the spectral range of 1–500 GHz to collect heterogeneous empirical data. To extend the study, honey bee mockups made from polyamide 12 (PA12) and epoxy resin are employed and validated as effective substitutes for real bees through comparative scattering analyses. The research further explores radar cross-section (RCS), imaging, and spectral properties using advanced THz technologies, including resonant tunneling diodes (RTDs) operating at 250 GHz and THz time-domain spectroscopy (THz-TDS) for frequencies exceeding 250 GHz. High-resolution imaging, utilizing a 450 GHz bandwidth, captures intricate anatomical features of both real and 3D-printed bees, showcasing the potential of THz technology for detailed environmental monitoring. Finally, simulations at 300 GHz assess the dosimetry and feasibility of non-invasive, continuous monitoring approaches based on the heterogeneous honey bee model.
- 27 March 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-23
Open AccessPerspectives on terahertz honey bee sensing
Terahertz (THz) technology provides precise monitoring capabilities in dynamic environments, offering unique insights into insect habitats. Our study focuses on environmental monitoring of European honey bees (Apis mellifera) through a combination of measurements and simulations. Initially, the dielectric material properties of honey bee body parts are characterized across the spectral range of 1–500 GHz to collect heterogeneous empirical data. To extend the study, honey bee mockups made from polyamide 12 (PA12) and epoxy resin are employed and validated as effective substitutes for real bees through comparative scattering analyses. The research further explores radar cross-section (RCS), imaging, and spectral properties using advanced THz technologies, including resonant tunneling diodes (RTDs) operating at 250 GHz and THz time-domain spectroscopy (THz-TDS) for frequencies exceeding 250 GHz. High-resolution imaging, utilizing a 450 GHz bandwidth, captures intricate anatomical features of both real and 3D-printed bees, showcasing the potential of THz technology for detailed environmental monitoring. Finally, simulations at 300 GHz assess the dosimetry and feasibility of non-invasive, continuous monitoring approaches based on the heterogeneous honey bee model.
- Open Access
- 18 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 5 (2) , 399-408
Photonic Stepped-Frequency Intensity Modulated Comb Terahertz Radar
This work presents an ultra-high repetition rate (UHRR) terahertz time-domain spectroscopy (THz-TDS) system with a unique capability – it functions as a close-range pulsed radar with micrometer precision and an unambiguous range (UR) of about 3 mm. To extend the UR, a stepped-frequency intensity modulated comb (s-FIMC) is introduced. This results in a hybrid radar system, where s-FIMC is employed to determine the distance to a target, while the THz-TDS signal is utilized to monitor changes in the target's position with micrometer precision. With a 10 GHz modulation bandwidth, a resolution of 15 mm, and a range accuracy of $\pm$1.47 mm are achieved in s-FIMC mode. In the TDS mode, a range accuracy of $\pm$15 $\rm {\mu }$m is demonstrated.
- 18 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 5 (2) , 399-408
Open AccessPhotonic Stepped-Frequency Intensity Modulated Comb Terahertz Radar
This work presents an ultra-high repetition rate (UHRR) terahertz time-domain spectroscopy (THz-TDS) system with a unique capability – it functions as a close-range pulsed radar with micrometer precision and an unambiguous range (UR) of about 3 mm. To extend the UR, a stepped-frequency intensity modulated comb (s-FIMC) is introduced. This results in a hybrid radar system, where s-FIMC is employed to determine the distance to a target, while the THz-TDS signal is utilized to monitor changes in the target's position with micrometer precision. With a 10 GHz modulation bandwidth, a resolution of 15 mm, and a range accuracy of $\pm$1.47 mm are achieved in s-FIMC mode. In the TDS mode, a range accuracy of $\pm$15 $\rm {\mu }$m is demonstrated.
- Open Access
- 4 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (2) , 883-897
Envisioned-Empowered Wind-Dispersal Coded Flier System With Passive RFID Infrastructure: Experimental Evaluation
The concept of sensing environmental parameters in the air has recently gained attention through drone-based, insect-based, or wind-dispersal-based mechanisms. Interestingly, wind-dispersal mechanisms require no driving mechanical system and are solely powered by wind energy to scan and sense selected areas of interest. In this paper, we propose a low-cost system of wind-dispersal fliers that are coded and localized based on passive UHF RFID technology. For the flier's mechanical design, a 2D structure is first designed, inspired by winged seeds, consisting of four wings with asymmetrical cross-sections to provide better mechanical stability during descent and enhanced integration with UHF RFID tags. The 2D structure is then transformed into 3D configurations by tilting the blades at different angles and utilizing different curvatures. By introducing porosity in the 3D design and optimizing the blades' angles and curvature, a low terminal velocity of 1.64 m/s is achieved based on measurements. The fliers are fabricated using Laser Sintering from Polyamide 12 (PA12) with a low thickness of $200\,\,\mu \textrm {m}$ . For system demonstration, four distributed reader antennas are employed to interrogate a coded flier equipped with a passive RFID tag that uses a UHF Gen2 chip. For system evaluation, various scenarios encompassing distinct tags and flier trajectories are evaluated using a Received Signal Strength Indicator (RSSI) algorithm, specifically tailored to meet our system requirements. The average localization error varies across the evaluated scenarios, providing insights into the performance of the system under different conditions.
- 4 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (2) , 883-897
Open AccessEnvisioned-Empowered Wind-Dispersal Coded Flier System With Passive RFID Infrastructure: Experimental Evaluation
The concept of sensing environmental parameters in the air has recently gained attention through drone-based, insect-based, or wind-dispersal-based mechanisms. Interestingly, wind-dispersal mechanisms require no driving mechanical system and are solely powered by wind energy to scan and sense selected areas of interest. In this paper, we propose a low-cost system of wind-dispersal fliers that are coded and localized based on passive UHF RFID technology. For the flier's mechanical design, a 2D structure is first designed, inspired by winged seeds, consisting of four wings with asymmetrical cross-sections to provide better mechanical stability during descent and enhanced integration with UHF RFID tags. The 2D structure is then transformed into 3D configurations by tilting the blades at different angles and utilizing different curvatures. By introducing porosity in the 3D design and optimizing the blades' angles and curvature, a low terminal velocity of 1.64 m/s is achieved based on measurements. The fliers are fabricated using Laser Sintering from Polyamide 12 (PA12) with a low thickness of $200\,\,\mu \textrm {m}$ . For system demonstration, four distributed reader antennas are employed to interrogate a coded flier equipped with a passive RFID tag that uses a UHF Gen2 chip. For system evaluation, various scenarios encompassing distinct tags and flier trajectories are evaluated using a Received Signal Strength Indicator (RSSI) algorithm, specifically tailored to meet our system requirements. The average localization error varies across the evaluated scenarios, providing insights into the performance of the system under different conditions.
- 17 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 67-69
Fast CW-THz System Employing a Dual Mode Y-Branch DFB Laser
We present a photonic CW-THz system operating at 1 THz capable of measuring the phase information of the THz path with a measurement rate of 10 kHz and micrometer precision. The 1 THz beating signal is generated in a monolithic dual mode Y-branch DFB laser, where one of the emission modes is tuned in wavelength by current density with a modulation frequency of 500 kHz. The system performance is demonstrated by sampling the position of a loudspeaker membrane through an optically opaque material.
- 17 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 67-69
Fast CW-THz System Employing a Dual Mode Y-Branch DFB Laser
We present a photonic CW-THz system operating at 1 THz capable of measuring the phase information of the THz path with a measurement rate of 10 kHz and micrometer precision. The 1 THz beating signal is generated in a monolithic dual mode Y-branch DFB laser, where one of the emission modes is tuned in wavelength by current density with a modulation frequency of 500 kHz. The system performance is demonstrated by sampling the position of a loudspeaker membrane through an optically opaque material.