Kristina M. Holsgrove
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Kristina M. Holsgrove has a total of 93 co-authors. Here are the top co-authors by number of shared publications:
- Amit Kumar
Centre for Quantum Materials and Technologies, School of Mathematics and Physics, Queen’s University Belfast, Belfast, UK
7 shared publications - John Martin Gregg
Centre for Quantum Materials and Technologies, School of Mathematics and Physics, Queen’s University Belfast, Belfast, UK
4 shared publications - Miryam Arredondo
School of Mathematics and Physics Queen's University Belfast Belfast UK
4 shared publications - Alfred Kersch
Munich University of Applied Sciences 80335 Munich Germany
3 shared publications Amit Kumar
School of Mathematics and Physics, Queen's University Belfast, UK
3 shared publications- Bohan Xu
NaMLab gGmbH Noethnitzer Str. 64 a 01187 Dresden Germany
3 shared publications
Latest Publications
- Open Access
- 1 September 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (80)
Enhanced Ferroelectric Phase Formation via Local Structure Modification in the Pre‐Crystalline State of Hafnium Zirconium Oxide Thin Films
Ferroelectric hafnium zirconium oxide is one of the most promising materials for non‐volatile memory applications due to its stability at small size scales and compatibility with robust fabrication techniques. However, the manufacture of phase‐pure ferroelectric hafnia remains an elusive challenge due to its sensitivity to synthesis and integration factors. This work reports on the use of argon plasma atomic layer annealing during atomic layer deposition growth as a route to enhance formation of the ferroelectric phase in hafnium zirconium oxide thin films. The introduction and the lengthening of the duration of atomic layer annealing enhance the ferroelectric properties of the films that form after a rapid thermal anneal. This is observed through Fourier transform infrared spectroscopy and corroborated via scanning transmission electron microscopy, polarization measurements, and piezoresponse force microscopy. Qualitative analysis of the extended X‐ray absorption fine structure region reveals a change in the second‐nearest‐neighbor environment of the absorbing species in the amorphous deposit as atomic layer annealing duration varies. This change in the local structure creates a more favorable environment for ferroelectric phase crystallization, positioning atomic layer annealing as a processing route to facilitate hafnia‐based films with increased ferroelectric phase concentrations and virtually no polarization wake‐up.
- 1 September 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (80)
Open AccessEnhanced Ferroelectric Phase Formation via Local Structure Modification in the Pre‐Crystalline State of Hafnium Zirconium Oxide Thin Films
Ferroelectric hafnium zirconium oxide is one of the most promising materials for non‐volatile memory applications due to its stability at small size scales and compatibility with robust fabrication techniques. However, the manufacture of phase‐pure ferroelectric hafnia remains an elusive challenge due to its sensitivity to synthesis and integration factors. This work reports on the use of argon plasma atomic layer annealing during atomic layer deposition growth as a route to enhance formation of the ferroelectric phase in hafnium zirconium oxide thin films. The introduction and the lengthening of the duration of atomic layer annealing enhance the ferroelectric properties of the films that form after a rapid thermal anneal. This is observed through Fourier transform infrared spectroscopy and corroborated via scanning transmission electron microscopy, polarization measurements, and piezoresponse force microscopy. Qualitative analysis of the extended X‐ray absorption fine structure region reveals a change in the second‐nearest‐neighbor environment of the absorbing species in the amorphous deposit as atomic layer annealing duration varies. This change in the local structure creates a more favorable environment for ferroelectric phase crystallization, positioning atomic layer annealing as a processing route to facilitate hafnia‐based films with increased ferroelectric phase concentrations and virtually no polarization wake‐up.
- Open Access
- 7 January 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (2) , 3661
Addition to “Chemical Compensation Challenges in Processing Antiferroelectric PbZrO 3 Thin Films”
- 7 January 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (2) , 3661
Open AccessAddition to “Chemical Compensation Challenges in Processing Antiferroelectric PbZrO 3 Thin Films”
- Open Access
Direct Thermal Imaging of Domain Wall Hot Spots in LiNbO 3
Ferroelectric domain wall devices offer a promising route to low‐voltage, reconfigurable nanoelectronics by confining currents to nanoscale conducting interfaces within an insulating bulk. However, the potential for resistive heating and unregulated temperature increases due to domain wall conduction remains unexplored. Here, scanning thermal microscopy is employed to directly image hot spots in thin‐film lithium niobate domain wall devices. Piezoresponse force microscopy shows that the hot spots correlate with nanodomain structure, and thermal mapping reveals surface temperature rises of ≈20 K at most, levels that are unlikely to negatively affect device performance. This is due to the moderate electrical conductivity of domain walls, their voltage‐tunable erasure, and distributed current pathways, which inherently limit power dissipation and peak temperatures. Finite element electrothermal modelling indicates that domain walls behave as pseudo‐planar heat sources, distinct from the filament‐based heating typically observed in resistive switching oxides. These findings highlight the potential for domain wall devices as an energy‐efficient, thermally stable platform for emerging memory and logic applications.
Open AccessDirect Thermal Imaging of Domain Wall Hot Spots in LiNbO 3
Ferroelectric domain wall devices offer a promising route to low‐voltage, reconfigurable nanoelectronics by confining currents to nanoscale conducting interfaces within an insulating bulk. However, the potential for resistive heating and unregulated temperature increases due to domain wall conduction remains unexplored. Here, scanning thermal microscopy is employed to directly image hot spots in thin‐film lithium niobate domain wall devices. Piezoresponse force microscopy shows that the hot spots correlate with nanodomain structure, and thermal mapping reveals surface temperature rises of ≈20 K at most, levels that are unlikely to negatively affect device performance. This is due to the moderate electrical conductivity of domain walls, their voltage‐tunable erasure, and distributed current pathways, which inherently limit power dissipation and peak temperatures. Finite element electrothermal modelling indicates that domain walls behave as pseudo‐planar heat sources, distinct from the filament‐based heating typically observed in resistive switching oxides. These findings highlight the potential for domain wall devices as an energy‐efficient, thermally stable platform for emerging memory and logic applications.
- Open Access
- 1 August 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (5)
Perspective: Domain wall nanoelectronics
Ferroelectric domain walls are two-dimensional interface structures with electrical conductivities that can be many orders of magnitude greater than the matrix they surround. They can be p- or n-type, metallic, and even superconducting. They necessarily exist in networks, where each wall must terminate either at another wall or at a bounding surface. In that sense, they form ready-made electrical circuits, only needing external contacts and connections to power sources. Crucially, walls can be created, moved, and annihilated by externally applied fields and, thus, wall networks are completely reconfigurable. This microstructural malleability suggests exciting possibilities for dynamic domain wall circuitry, which can be configured for one purpose in one instant, only to be completely reconfigured for a different purpose in the next. In this Perspective article, we will summarize the physics responsible for domain wall conduction, focusing on the effects of apparent polar divergence. We will present progress made to date, in the site-specific injection and controlled motion of domain walls, and discuss the kinds of devices realized so far (such as binary memory, memristors, p–n junctions, diodes, transistors, logic gates, and artificial synapses) that either rely on domain wall conducting conduits or can be made by controlling wall morphology. Challenges and needs for developing meaningful technology, based on domain walls, will also be explored.
- 1 August 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (5)
Open AccessPerspective: Domain wall nanoelectronics
Ferroelectric domain walls are two-dimensional interface structures with electrical conductivities that can be many orders of magnitude greater than the matrix they surround. They can be p- or n-type, metallic, and even superconducting. They necessarily exist in networks, where each wall must terminate either at another wall or at a bounding surface. In that sense, they form ready-made electrical circuits, only needing external contacts and connections to power sources. Crucially, walls can be created, moved, and annihilated by externally applied fields and, thus, wall networks are completely reconfigurable. This microstructural malleability suggests exciting possibilities for dynamic domain wall circuitry, which can be configured for one purpose in one instant, only to be completely reconfigured for a different purpose in the next. In this Perspective article, we will summarize the physics responsible for domain wall conduction, focusing on the effects of apparent polar divergence. We will present progress made to date, in the site-specific injection and controlled motion of domain walls, and discuss the kinds of devices realized so far (such as binary memory, memristors, p–n junctions, diodes, transistors, logic gates, and artificial synapses) that either rely on domain wall conducting conduits or can be made by controlling wall morphology. Challenges and needs for developing meaningful technology, based on domain walls, will also be explored.
- Open Access
- 5 July 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (27) , 29878-29887
Chemical Compensation Challenges in Processing Antiferroelectric PbZrO3 Thin Films
The electric field-induced antipolar-to-polar phase transition in antiferroelectric materials is accompanied by large changes in the structural and functional response, making them attractive for many applications ranging from pulsed energy capacitors to high-strain-high (blocking-)force actuators, solid-state heating and cooling systems, and optoelectronic devices. PbZrO3, as an end member of the PZT, (x)PbZr1–xTixO3, solid solution, has been the subject of many studies. However, processing of perovskite PbZrO3 is extremely challenging due to phase instabilities induced by Pb loss at the temperatures necessary for perovskite crystallization. Here, we discuss the challenges associated with Pb loss, as well as its compensation through bulk Pb overstoichiometry and interfacial PbO additions, in chemical solution processed, highly oriented PbZrO3 thin films. For both 042o- and 001o-oriented (o-orthorhombic distortion) PbZrO3 thin films, the crystallization interfaces are the most important contributors to Pb loss and off-stoichiometric outcomes, and no single approach was sufficient to address these challenges. Pb-rich and Pb-deficient nonperovskite phases including ZrOx were only observable through microscopic characterization, and X-ray diffraction alone could not rule out the presence of such secondary phases. “Ideal” macroscopic antiferroelectric polarization-electric field double hysteresis curves were observed despite (at times) the large presence of secondary phases. However, reduced saturation polarization and increased phase transition electric fields were observed concomitantly with the presence of secondary phase(s) and tentatively assigned to the voltage drop across the ZrOx nanocrystals. Based on these results, it is imperative that the presence of secondary phases always be addressed (beyond X-ray diffraction spectra) in order to correctly evaluate the properties of antiferroelectric films.
- 5 July 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (27) , 29878-29887
Open AccessChemical Compensation Challenges in Processing Antiferroelectric PbZrO3 Thin Films
The electric field-induced antipolar-to-polar phase transition in antiferroelectric materials is accompanied by large changes in the structural and functional response, making them attractive for many applications ranging from pulsed energy capacitors to high-strain-high (blocking-)force actuators, solid-state heating and cooling systems, and optoelectronic devices. PbZrO3, as an end member of the PZT, (x)PbZr1–xTixO3, solid solution, has been the subject of many studies. However, processing of perovskite PbZrO3 is extremely challenging due to phase instabilities induced by Pb loss at the temperatures necessary for perovskite crystallization. Here, we discuss the challenges associated with Pb loss, as well as its compensation through bulk Pb overstoichiometry and interfacial PbO additions, in chemical solution processed, highly oriented PbZrO3 thin films. For both 042o- and 001o-oriented (o-orthorhombic distortion) PbZrO3 thin films, the crystallization interfaces are the most important contributors to Pb loss and off-stoichiometric outcomes, and no single approach was sufficient to address these challenges. Pb-rich and Pb-deficient nonperovskite phases including ZrOx were only observable through microscopic characterization, and X-ray diffraction alone could not rule out the presence of such secondary phases. “Ideal” macroscopic antiferroelectric polarization-electric field double hysteresis curves were observed despite (at times) the large presence of secondary phases. However, reduced saturation polarization and increased phase transition electric fields were observed concomitantly with the presence of secondary phase(s) and tentatively assigned to the voltage drop across the ZrOx nanocrystals. Based on these results, it is imperative that the presence of secondary phases always be addressed (beyond X-ray diffraction spectra) in order to correctly evaluate the properties of antiferroelectric films.
- Open Access
- 14 May 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (20) , 20524-20535
Effect of Precursor Purge Time on Plasma-Enhanced Atomic Layer Deposition-Prepared Ferroelectric Hf0.5Zr0.5O2 Phase and Performance
Hafnium oxide-based thin films, in particular hafnium zirconium oxide (HZO), have potential for applications in nonvolatile memory and energy harvesting. Atomic layer deposition (ALD) is the most widely used method for HZO deposition due to its precise thickness control and ability to provide conformal coverage. Previous studies have shown the effects of different metal precursors, oxidizer precursors, and process temperatures on the ferroelectric properties of HZO. However, no mechanism has been identified to describe the different phase stabilities as the metal precursor purge time varies. This study investigates how varying the metal precursor purge time during plasma-enhanced ALD (PE-ALD) influences the phases and properties of the HZO thin films. Grazing incidence X-ray diffraction, Fourier transform infrared spectroscopy, and scanning transmission electron microscopy are used to study the changes in phase of HZO with variation of the metal precursor purge time during the PE-ALD process. The phases observed are correlated with polarization and relative permittivity responses under an electric field, including wake-up and endurance effects. The resulting phases and properties are linked to changes in composition, as measured using time-of-flight secondary ion mass spectrometry and X-ray photoelectron spectroscopy. It is shown that short metal precursor purge times result in increased carbon and nitrogen impurities and stabilization of the antipolar Pbca phase. Long purge times lead to films comprising predominantly the ferroelectric Pca2 1 phase.
- 14 May 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (20) , 20524-20535
Open AccessEffect of Precursor Purge Time on Plasma-Enhanced Atomic Layer Deposition-Prepared Ferroelectric Hf0.5Zr0.5O2 Phase and Performance
Hafnium oxide-based thin films, in particular hafnium zirconium oxide (HZO), have potential for applications in nonvolatile memory and energy harvesting. Atomic layer deposition (ALD) is the most widely used method for HZO deposition due to its precise thickness control and ability to provide conformal coverage. Previous studies have shown the effects of different metal precursors, oxidizer precursors, and process temperatures on the ferroelectric properties of HZO. However, no mechanism has been identified to describe the different phase stabilities as the metal precursor purge time varies. This study investigates how varying the metal precursor purge time during plasma-enhanced ALD (PE-ALD) influences the phases and properties of the HZO thin films. Grazing incidence X-ray diffraction, Fourier transform infrared spectroscopy, and scanning transmission electron microscopy are used to study the changes in phase of HZO with variation of the metal precursor purge time during the PE-ALD process. The phases observed are correlated with polarization and relative permittivity responses under an electric field, including wake-up and endurance effects. The resulting phases and properties are linked to changes in composition, as measured using time-of-flight secondary ion mass spectrometry and X-ray photoelectron spectroscopy. It is shown that short metal precursor purge times result in increased carbon and nitrogen impurities and stabilization of the antipolar Pbca phase. Long purge times lead to films comprising predominantly the ferroelectric Pca2 1 phase.
Interaction Between Strain and Phase Formation in Hf x Zr 1‐x O 2 Thin Films
Hf x Zr 1‐x O 2 thin films have excellent complementary metal–oxide semiconductor compatibility and scalability compared to other ferroelectric materials. This makes them a promising candidate for non‐volatile memory applications. However, the polymorphism of the materials presents a challenge in stabilizing the ferroelectric properties. Since the wake‐up free non‐volatile memory applications require the presence of ferroelectric properties in the pristine state of the films without additional electric field cycling, it is necessary to understand how to promote the ferroelectric orthorhombic phase formation. In this work, the interaction between in‐plane tensile strain and phase formation of atomic layer deposition grown Hf x Zr 1‐x O 2 thin films with different thicknesses and different compositions is demonstrated. By combining the biaxial in‐plane tensile strain with the electric switching field and remanent polarization, it is observed that the best ferroelectric properties correlated with an in‐plane tensile strain range of 0.4–0.6%. Moreover, the observed correlation between strain and phase formation indicates that strain exerts an influence on phase formation in the pristine state, and that phase formation, in turn, affects strain during electrical field cycling. This work is expected to be helpful to improve the ferroelectric properties in Hf x Zr 1‐x O 2 films, which can be processed for different memory devices with specialized requirements.
Interaction Between Strain and Phase Formation in Hf x Zr 1‐x O 2 Thin Films
Hf x Zr 1‐x O 2 thin films have excellent complementary metal–oxide semiconductor compatibility and scalability compared to other ferroelectric materials. This makes them a promising candidate for non‐volatile memory applications. However, the polymorphism of the materials presents a challenge in stabilizing the ferroelectric properties. Since the wake‐up free non‐volatile memory applications require the presence of ferroelectric properties in the pristine state of the films without additional electric field cycling, it is necessary to understand how to promote the ferroelectric orthorhombic phase formation. In this work, the interaction between in‐plane tensile strain and phase formation of atomic layer deposition grown Hf x Zr 1‐x O 2 thin films with different thicknesses and different compositions is demonstrated. By combining the biaxial in‐plane tensile strain with the electric switching field and remanent polarization, it is observed that the best ferroelectric properties correlated with an in‐plane tensile strain range of 0.4–0.6%. Moreover, the observed correlation between strain and phase formation indicates that strain exerts an influence on phase formation in the pristine state, and that phase formation, in turn, affects strain during electrical field cycling. This work is expected to be helpful to improve the ferroelectric properties in Hf x Zr 1‐x O 2 films, which can be processed for different memory devices with specialized requirements.
- 14 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (25) , 32533-32542
Influence of Biaxial Strain and Interfacial Layer Growth on Ferroelectric Wake-Up and Phase Transition Fields in ZrO2
Investigations on fluorite-structured ferroelectric HfO2/ZrO2 thin films are aiming to achieve high-performance films required for memory and computing technologies. These films exhibit excellent scalability and compatibility with the complementary metal-oxide semiconductor process used by semiconductor foundries, but stabilizing ferroelectric properties with a low operation voltage in the as-fabricated state of these films is a critical component for technology advancement. After removing the influence of interfacial layers, a linear correlation is observed between the biaxial strain and the electric field for transforming the nonferroelectric tetragonal to the ferroelectric orthorhombic phase in ZrO2 thin films. This observation is supported by applying the principle of energy conservation in combination with ab initio and molecular dynamics simulations. According to the simulations, a rarely reported Pnm21 orthorhombic phase may be stabilized by tuning biaxial strain in the ZrO2 films. This study demonstrates the significant influence of interfacial layers and biaxial strain on the phase transition fields and shows how strain engineering can be used to improve ferroelectric wake-up in ZrO2.
- 14 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (25) , 32533-32542
Influence of Biaxial Strain and Interfacial Layer Growth on Ferroelectric Wake-Up and Phase Transition Fields in ZrO2
Investigations on fluorite-structured ferroelectric HfO2/ZrO2 thin films are aiming to achieve high-performance films required for memory and computing technologies. These films exhibit excellent scalability and compatibility with the complementary metal-oxide semiconductor process used by semiconductor foundries, but stabilizing ferroelectric properties with a low operation voltage in the as-fabricated state of these films is a critical component for technology advancement. After removing the influence of interfacial layers, a linear correlation is observed between the biaxial strain and the electric field for transforming the nonferroelectric tetragonal to the ferroelectric orthorhombic phase in ZrO2 thin films. This observation is supported by applying the principle of energy conservation in combination with ab initio and molecular dynamics simulations. According to the simulations, a rarely reported Pnm21 orthorhombic phase may be stabilized by tuning biaxial strain in the ZrO2 films. This study demonstrates the significant influence of interfacial layers and biaxial strain on the phase transition fields and shows how strain engineering can be used to improve ferroelectric wake-up in ZrO2.
- Open Access
- 22 April 2024
- Published by Wiley in Advanced Electronic Materials
- Vol. 10 (10)
Fundamental Aspects of Conduction in Charged ErMnO3 Domain Walls
It is now well‐established that ferroelectric domain walls, at which there are discontinuities in polarization, are usually electrically conducting. Yet, there is a dearth of rather basic information on the physics underpinning conductivity. Here, Kelvin Probe Force Microscopy (KPFM)‐based experiments are reported, which allow significant new insights regarding charge transport at domain walls in ErMnO3. In one set of experiments, KPFM is used to spatially map the Hall potential, developed at the surface of polished single crystals. These maps provide direct experimental evidence that n‐type head‐to‐head domain walls arise in otherwise p‐type material. In another set of experiments, the geometry for current flow is restricted, by cutting sub‐micron thick lamellar slices of ErMnO3 (using a Focused Ion Beam microscope). Separate contacts are made to n and p‐type walls and the potential profiles, when driving source‐drain currents, are measured (again using KPFM). Current‐electric field functions showed Ohmic behaviour for p‐type walls, with an intrinsic room temperature conductivity value of ≈0.4Sm−1. The n‐type walls showed non‐Ohmic behaviour and a significantly lower conductivity, supporting the prediction that electrons are in a polaronic state; an upper bound for the room temperature conductivity of the domains themselves is ≈6 × 10−6Sm−1 at 0.1 MVm−1.
- 22 April 2024
- Published by Wiley in Advanced Electronic Materials
- Vol. 10 (10)
Open AccessFundamental Aspects of Conduction in Charged ErMnO3 Domain Walls
It is now well‐established that ferroelectric domain walls, at which there are discontinuities in polarization, are usually electrically conducting. Yet, there is a dearth of rather basic information on the physics underpinning conductivity. Here, Kelvin Probe Force Microscopy (KPFM)‐based experiments are reported, which allow significant new insights regarding charge transport at domain walls in ErMnO3. In one set of experiments, KPFM is used to spatially map the Hall potential, developed at the surface of polished single crystals. These maps provide direct experimental evidence that n‐type head‐to‐head domain walls arise in otherwise p‐type material. In another set of experiments, the geometry for current flow is restricted, by cutting sub‐micron thick lamellar slices of ErMnO3 (using a Focused Ion Beam microscope). Separate contacts are made to n and p‐type walls and the potential profiles, when driving source‐drain currents, are measured (again using KPFM). Current‐electric field functions showed Ohmic behaviour for p‐type walls, with an intrinsic room temperature conductivity value of ≈0.4Sm−1. The n‐type walls showed non‐Ohmic behaviour and a significantly lower conductivity, supporting the prediction that electrons are in a polaronic state; an upper bound for the room temperature conductivity of the domains themselves is ≈6 × 10−6Sm−1 at 0.1 MVm−1.
- Open Access
- 10 November 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (8)
Strain as a Global Factor in Stabilizing the Ferroelectric Properties of ZrO2
Since the discovery of ferroelectricity in doped HfO2 and ZrO2 thin films over a decade ago, fluorite‐structured ferroelectric thin films have attracted much research attention due to their excellent scalability and complementary metal‐oxide semiconductor compatibility compared to conventional perovskite ferroelectric materials. Although various factors influencing the formation of the ferroelectric properties are identified, a clear understanding of the causes of the phase formation have been difficult to determine. In this work, ZrO2 films deposited by atomic layer deposition and chemical solution deposition have resulted in films with completely different structural properties. Regardless of these differences, a general relationship between strain and phase formation is established, leading to a more unified understanding of ferroelectric phase formation in undoped ZrO2 films, which can be applied to other fluorite‐structured films.
- 10 November 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (8)
Open AccessStrain as a Global Factor in Stabilizing the Ferroelectric Properties of ZrO2
Since the discovery of ferroelectricity in doped HfO2 and ZrO2 thin films over a decade ago, fluorite‐structured ferroelectric thin films have attracted much research attention due to their excellent scalability and complementary metal‐oxide semiconductor compatibility compared to conventional perovskite ferroelectric materials. Although various factors influencing the formation of the ferroelectric properties are identified, a clear understanding of the causes of the phase formation have been difficult to determine. In this work, ZrO2 films deposited by atomic layer deposition and chemical solution deposition have resulted in films with completely different structural properties. Regardless of these differences, a general relationship between strain and phase formation is established, leading to a more unified understanding of ferroelectric phase formation in undoped ZrO2 films, which can be applied to other fluorite‐structured films.