Hanane Zermane
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hanane Zermane has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
Hassina Madjour
Laboratory of Automation and Manufacturing, Industrial Engineering Department, Faculty of Technology , Batna 2 University , Batna , Algeria
4 shared publications- Hassina Madjour
Industrial Engineering Department, Laboratory of Automation and Manufacturing, Faculty of Technology, University of Batna 2- Mostefa Ben Boulaid, Batna 05000, Algeria
4 shared publications Ahcene Ziar
Batna 2 University
3 shared publicationsAbbes Drardja
Laboratory of Automation and Manufacturing, Industrial Engineering Department, University of Batna 2, Batna, Algeria
2 shared publicationsAbderrahim Zermane
University of Putra
2 shared publications- Abderrahim Zermane
Safety Engineering Interest Group , Department of Chemical and Environmental Engineering , Faculty of Engineering, University Putra Malaysia , Serdang , Selangor, Malaysia
2 shared publications
Latest Publications
- 2 July 2026
- Published by Springer Nature
- p. 693-705
Basic Experiments on Predictive Maintenance of Naval Propulsion System Using Small-Scale Machine Learning
- 2 July 2026
- Published by Springer Nature
- p. 693-705
Basic Experiments on Predictive Maintenance of Naval Propulsion System Using Small-Scale Machine Learning
- 19 May 2026
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (32) , 33270-33284
Enhancing Cement Rotary Kiln Efficiency: A Deep Learning Approach for Real-Time Monitoring and Fault Detection
- 19 May 2026
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (32) , 33270-33284
Enhancing Cement Rotary Kiln Efficiency: A Deep Learning Approach for Real-Time Monitoring and Fault Detection
- 6 December 2025
- Published by World Scientific Pub Co Pte Ltd in International Journal of Software Engineering and Knowledge Engineering
- Vol. 36 (05) , 697-717
Optimizing Production Forecasting in Dynamic Complex Industries with Deep Reinforcement Learning Approaches
Modern factories aim to boost production to increase profits and remain competitive amid intense market pressure. This goal is pursued through production planning, which not only improves process efficiency but also ensures product quality and long-term market success. Among the key tools that support this objective is production forecasting, which plays a central role in facilitating manufacturing processes. In this study, we focus on enhancing the efficiency of industrial systems by developing smart predictive models based on Deep Reinforcement Learning (DRL). Specifically, time-series data from the rotary cement kiln at the SCIMAT factory (Batna, Algeria) were used to predict clinker production. The proposed model, based on the DDQN network, outperformed both the traditional Q-learning network and the DQN. The DDQN achieved a Mean Squared Error (MSE) of 0.0010, a Root Mean Squared Error (RMSE) of 0.0316, and a coefficient of determination ([ ]) of 0.9484. In contrast, the DQN achieved an MSE of 0.0014, an RMSE of 0.0374 and an [ ] of 0.9374. The traditional Q-learning network achieved an MSE of 0.0052, an RMSE of 0.0725 and an [ ] of 0.8865. The LSTM algorithm achieved an MSE of 0.0069, an RMSE of 0.0830 and an [ ] of 0.6570. The developed model is designed to be integrated into the plant’s control system via Programmable Logic Controllers (PLCs), enabling automated operation without direct human intervention. The DQN model demonstrated strong predictive accuracy, leading to improved resource management and operational efficiency. Its application can also be extended to other industrial domains.
- 6 December 2025
- Published by World Scientific Pub Co Pte Ltd in International Journal of Software Engineering and Knowledge Engineering
- Vol. 36 (05) , 697-717
Optimizing Production Forecasting in Dynamic Complex Industries with Deep Reinforcement Learning Approaches
Modern factories aim to boost production to increase profits and remain competitive amid intense market pressure. This goal is pursued through production planning, which not only improves process efficiency but also ensures product quality and long-term market success. Among the key tools that support this objective is production forecasting, which plays a central role in facilitating manufacturing processes. In this study, we focus on enhancing the efficiency of industrial systems by developing smart predictive models based on Deep Reinforcement Learning (DRL). Specifically, time-series data from the rotary cement kiln at the SCIMAT factory (Batna, Algeria) were used to predict clinker production. The proposed model, based on the DDQN network, outperformed both the traditional Q-learning network and the DQN. The DDQN achieved a Mean Squared Error (MSE) of 0.0010, a Root Mean Squared Error (RMSE) of 0.0316, and a coefficient of determination ([ ]) of 0.9484. In contrast, the DQN achieved an MSE of 0.0014, an RMSE of 0.0374 and an [ ] of 0.9374. The traditional Q-learning network achieved an MSE of 0.0052, an RMSE of 0.0725 and an [ ] of 0.8865. The LSTM algorithm achieved an MSE of 0.0069, an RMSE of 0.0830 and an [ ] of 0.6570. The developed model is designed to be integrated into the plant’s control system via Programmable Logic Controllers (PLCs), enabling automated operation without direct human intervention. The DQN model demonstrated strong predictive accuracy, leading to improved resource management and operational efficiency. Its application can also be extended to other industrial domains.
- Open Access
- 1 September 2025
- Published by Walter de Gruyter GmbH in Ecological Chemistry and Engineering S
- Vol. 32 (3) , 415-426
Forecasting the Required Quantity of Cement Manufacturing Materials Using Time Series and Q-Network Techniques
In the era of Industry 4.0, accurate prediction of industrial process parameters is essential for optimising operations, lowering costs, and enhancing product quality. Traditional statistical methods often struggle to capture the complex temporal dependencies within industrial processes. This study explores the use of Long Short-Term Memory (LSTM), Bidirectional Long Short-Term Memory (BiLSTM), and Q-Network models to predict material quantities in an industrial dataset. The dataset was pre-processed to address missing values and outliers, and the models were evaluated based on Mean Squared Error ( MSE ), R 2 , and accuracy. The results show that the LSTM model achieved an MSE of 14.253 and an R 2 of 0.700. The BiLSTM model greatly outperformed it, with an MSE of 0.714 and an R 2 of 0.985. The Q-Network model produced an MSE of 0.005 and an R 2 of 0.992. These findings demonstrate the Q-Network’s superior ability to capture temporal dependencies within the data.
- 1 September 2025
- Published by Walter de Gruyter GmbH in Ecological Chemistry and Engineering S
- Vol. 32 (3) , 415-426
Open AccessForecasting the Required Quantity of Cement Manufacturing Materials Using Time Series and Q-Network Techniques
In the era of Industry 4.0, accurate prediction of industrial process parameters is essential for optimising operations, lowering costs, and enhancing product quality. Traditional statistical methods often struggle to capture the complex temporal dependencies within industrial processes. This study explores the use of Long Short-Term Memory (LSTM), Bidirectional Long Short-Term Memory (BiLSTM), and Q-Network models to predict material quantities in an industrial dataset. The dataset was pre-processed to address missing values and outliers, and the models were evaluated based on Mean Squared Error ( MSE ), R 2 , and accuracy. The results show that the LSTM model achieved an MSE of 14.253 and an R 2 of 0.700. The BiLSTM model greatly outperformed it, with an MSE of 0.714 and an R 2 of 0.985. The Q-Network model produced an MSE of 0.005 and an R 2 of 0.992. These findings demonstrate the Q-Network’s superior ability to capture temporal dependencies within the data.
- 15 July 2025
- Published by Springer Nature
- p. 431-446
Classification of 3D-Printing Images for Detection of Defects
- 15 July 2025
- Published by Springer Nature
- p. 431-446
Classification of 3D-Printing Images for Detection of Defects
- 4 March 2025
- Published by Springer Nature
- p. 516-524
Machine Learning Techniques for GDP Per Capita Prediction in Developing Countries: A Case Study of Sub-Saharan Africa
- 4 March 2025
- Published by Springer Nature
- p. 516-524
Machine Learning Techniques for GDP Per Capita Prediction in Developing Countries: A Case Study of Sub-Saharan Africa
- Open Access
- 1 December 2024
- Published by Walter de Gruyter GmbH in The Scientific Bulletin of Electrical Engineering Faculty
- Vol. 24 (2) , 52-66
Transforming Industrial Supervision Systems: A Comprehensive Approach Integrating Machine Learning Techniques and Fuzzy Logic
In addressing the mounting challenges of industrial supervision systems grappling with intricate processes, this study pioneers a transformative paradigm centered on the SCIMAT cement factory. By seamlessly integrating Machine Learning and Fuzzy Logic, the primary aim is to revolutionize real-time control systems, with a keen focus on cement production. SVM integration into the supervision system, coupled with connectivity to a Programmable Logic Controller (PLC), is complemented by fuzzy real-time controllers’ regression analysis. Rigorous testing and evaluation validate the proposed approach’s reliability, showcasing its effectiveness in discerning optimal system functioning. The system’s practical application within a PLC environment underscores its prowess in issuing commands to industrial equipment, thereby enhancing operational efficiency. Going beyond conventional methodologies, our approach amalgamates SVM classification, fuzzy controllers, and real-time regression analysis, delivering a multifaceted solution for industrial supervision. The system’s standout achievement is an SVM classification accuracy surpassing 94% compared to other classifiers. The K-Nearest Neighbors (K-NN) model demonstrated an accuracy rate of approximately 93.83%. The decision tree model attained an accuracy of around 83.73%. The logistic regression model achieved an accuracy of 80.25%. These models are not only adept at distinguishing optimal functioning from faults but also adept at preserving the linguistic language used by operators. The study’s novelty lies in the holistic integration of SVM and Fuzzy Logic, offering a practical and adaptable solution that not only advances classification accuracy but also significantly reduces maintenance costs, marking a substantial improvement over the traditional methods. This transformative model, validated through SVM classification and practical application, establishes a new standard for flexibility, cost reduction, and overall productivity enhancement in industrial processes.
- 1 December 2024
- Published by Walter de Gruyter GmbH in The Scientific Bulletin of Electrical Engineering Faculty
- Vol. 24 (2) , 52-66
Open AccessTransforming Industrial Supervision Systems: A Comprehensive Approach Integrating Machine Learning Techniques and Fuzzy Logic
In addressing the mounting challenges of industrial supervision systems grappling with intricate processes, this study pioneers a transformative paradigm centered on the SCIMAT cement factory. By seamlessly integrating Machine Learning and Fuzzy Logic, the primary aim is to revolutionize real-time control systems, with a keen focus on cement production. SVM integration into the supervision system, coupled with connectivity to a Programmable Logic Controller (PLC), is complemented by fuzzy real-time controllers’ regression analysis. Rigorous testing and evaluation validate the proposed approach’s reliability, showcasing its effectiveness in discerning optimal system functioning. The system’s practical application within a PLC environment underscores its prowess in issuing commands to industrial equipment, thereby enhancing operational efficiency. Going beyond conventional methodologies, our approach amalgamates SVM classification, fuzzy controllers, and real-time regression analysis, delivering a multifaceted solution for industrial supervision. The system’s standout achievement is an SVM classification accuracy surpassing 94% compared to other classifiers. The K-Nearest Neighbors (K-NN) model demonstrated an accuracy rate of approximately 93.83%. The decision tree model attained an accuracy of around 83.73%. The logistic regression model achieved an accuracy of 80.25%. These models are not only adept at distinguishing optimal functioning from faults but also adept at preserving the linguistic language used by operators. The study’s novelty lies in the holistic integration of SVM and Fuzzy Logic, offering a practical and adaptable solution that not only advances classification accuracy but also significantly reduces maintenance costs, marking a substantial improvement over the traditional methods. This transformative model, validated through SVM classification and practical application, establishes a new standard for flexibility, cost reduction, and overall productivity enhancement in industrial processes.
- Open Access
- 1 June 2024
- Published by Walter de Gruyter GmbH in SEEU Review
- Vol. 19 (1) , 149-173
Statistical Analysis of Occupational Fatal Accidents for Risk Assessment
According to Malaysia's Department of Occupational Safety and Health (DOSH), workplace accidents have increased dramatically as the country's economy has grown rapidly. The purpose of this study is to identify the trends that lead to fatal workplace accidents in Malaysia. This study investigated 505 fatal accident instances from fifteen industries, using both qualitative and quantitative methodologies. The DOSH discovered and reported these fatalities (2010-2020). Data was organized and coded, then analyzed using Spearman's rank order correlation, frequency analysis, Eta squared, Cramer's V, and Chi-square. Moreover, neurolinguistic programming was used to generate the word cloud and sentiment analysis. Furthermore, light gradient-boosting machine learning was used to better understand the causes of fatalities. The outcomes indicated that fatal falls from heights were the leading cause of fatal accidents (32%). General laborers were the most susceptible to fatal accidents (60%). Contract workers were more likely to die in construction accidents (64%). The findings of this study gave useful insights into workplace fatal accident trends and preventive measures throughout sectors.
- 1 June 2024
- Published by Walter de Gruyter GmbH in SEEU Review
- Vol. 19 (1) , 149-173
Open AccessStatistical Analysis of Occupational Fatal Accidents for Risk Assessment
According to Malaysia's Department of Occupational Safety and Health (DOSH), workplace accidents have increased dramatically as the country's economy has grown rapidly. The purpose of this study is to identify the trends that lead to fatal workplace accidents in Malaysia. This study investigated 505 fatal accident instances from fifteen industries, using both qualitative and quantitative methodologies. The DOSH discovered and reported these fatalities (2010-2020). Data was organized and coded, then analyzed using Spearman's rank order correlation, frequency analysis, Eta squared, Cramer's V, and Chi-square. Moreover, neurolinguistic programming was used to generate the word cloud and sentiment analysis. Furthermore, light gradient-boosting machine learning was used to better understand the causes of fatalities. The outcomes indicated that fatal falls from heights were the leading cause of fatal accidents (32%). General laborers were the most susceptible to fatal accidents (60%). Contract workers were more likely to die in construction accidents (64%). The findings of this study gave useful insights into workplace fatal accident trends and preventive measures throughout sectors.
- Open Access
- 1 June 2024
- Published by Walter de Gruyter GmbH in Journal of Electrical Engineering
- Vol. 75 (3) , 237-248
Forecasting material quantity using machine learning and times series techniques
The current research is dedicated to harnessing cutting-edge technologies within the paradigm of Industry 5.0. The objective is to capitalize on advancements in Machine and Deep Learning techniques. This research endeavors to construct robust predictive models, utilizing historical data, for precise real-time predictions in estimating material quantities within a cement workshop. Machine Learning regressors evaluated based on several metrics, SVR (R-squared 0.9739, MAE 0.0403), Random Forest (R-squared 0.9990, MAE 0.0026), MLP (R-squared 0.9890, MAE 0.0255), Gradient Boosting (R-squared 0.9989, MAE 0.0042). The time series models LSTM and GRU yielded R-squared 0.9978, MAE 0.0100, and R-squared 0.9980, MAE 0.0099, respectively. The ultimate outcomes include improved and efficient production, optimization of production processes, streamlined operations, reduced downtime, mitigation of potential disruptions, and the facilitation of the factory’s evolution towards intelligent manufacturing processes embedded within the framework of Industry 5.0. These achievements underscore the potential impact of leveraging advanced machine learning techniques for enhancing the operational dynamics and overall efficiency of manufacturing facilities
- 1 June 2024
- Published by Walter de Gruyter GmbH in Journal of Electrical Engineering
- Vol. 75 (3) , 237-248
Open AccessForecasting material quantity using machine learning and times series techniques
The current research is dedicated to harnessing cutting-edge technologies within the paradigm of Industry 5.0. The objective is to capitalize on advancements in Machine and Deep Learning techniques. This research endeavors to construct robust predictive models, utilizing historical data, for precise real-time predictions in estimating material quantities within a cement workshop. Machine Learning regressors evaluated based on several metrics, SVR (R-squared 0.9739, MAE 0.0403), Random Forest (R-squared 0.9990, MAE 0.0026), MLP (R-squared 0.9890, MAE 0.0255), Gradient Boosting (R-squared 0.9989, MAE 0.0042). The time series models LSTM and GRU yielded R-squared 0.9978, MAE 0.0100, and R-squared 0.9980, MAE 0.0099, respectively. The ultimate outcomes include improved and efficient production, optimization of production processes, streamlined operations, reduced downtime, mitigation of potential disruptions, and the facilitation of the factory’s evolution towards intelligent manufacturing processes embedded within the framework of Industry 5.0. These achievements underscore the potential impact of leveraging advanced machine learning techniques for enhancing the operational dynamics and overall efficiency of manufacturing facilities
- Open Access
- 1 May 2024
- Published by Walter de Gruyter GmbH in Ars Medica Tomitana
- Vol. 30 (2) , 38-55
Statistical and Machine Learning-Based Predictive Models for Gestational Diabetes Mellitus Prevention
The focus of this paper is to use machine learning to create predictive models that detect the probable factors impacting Gestational Diabetes Mellitus (GDM) which is developed in some pregnant women. GDM is defined as any proportion of glucose intolerance developed during pregnancy. Several factors may cause GDM complications. Here, we aimed to identify factors predisposing to GDM and predict the occurrence based on several predictive models. The dataset used in this study is the Pima Indian. With the assistance of Machine Learning and Statistical Analysis, it is possible to develop intelligent models that are capable of making decisions on an autonomous basis. Seven machine learning models were tested to determine which model fits the dataset better. These models learn from past instances of data through Statistical Analysis and pattern matching. Based on the learned data, they provide us with the predicted results. This study establishes the feasibility of machine learning in the field of public health. It is observed that each technique gives different results of associated factors. The Cascade classifier model attained an accuracy of 98.58%, Random Forest (89%), SVM (69%), Logistic Regression (78%), K-NN (72%), and Decision Tree (78%). These models are validated and evaluated using several metrics. This work demonstrated that identifying risk factors must not consider one model.
- 1 May 2024
- Published by Walter de Gruyter GmbH in Ars Medica Tomitana
- Vol. 30 (2) , 38-55
Open AccessStatistical and Machine Learning-Based Predictive Models for Gestational Diabetes Mellitus Prevention
The focus of this paper is to use machine learning to create predictive models that detect the probable factors impacting Gestational Diabetes Mellitus (GDM) which is developed in some pregnant women. GDM is defined as any proportion of glucose intolerance developed during pregnancy. Several factors may cause GDM complications. Here, we aimed to identify factors predisposing to GDM and predict the occurrence based on several predictive models. The dataset used in this study is the Pima Indian. With the assistance of Machine Learning and Statistical Analysis, it is possible to develop intelligent models that are capable of making decisions on an autonomous basis. Seven machine learning models were tested to determine which model fits the dataset better. These models learn from past instances of data through Statistical Analysis and pattern matching. Based on the learned data, they provide us with the predicted results. This study establishes the feasibility of machine learning in the field of public health. It is observed that each technique gives different results of associated factors. The Cascade classifier model attained an accuracy of 98.58%, Random Forest (89%), SVM (69%), Logistic Regression (78%), K-NN (72%), and Decision Tree (78%). These models are validated and evaluated using several metrics. This work demonstrated that identifying risk factors must not consider one model.