TKTor E. Kristensen

Tor E. Kristensen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tor E. Kristensen has a total of 10 co-authors. Here are the top co-authors by number of shared publications:

  • Tomas L. Jensen

    Land Systems Division; Norwegian Defence Research Establishment (FFI); P.O. Box 25 2027 Kjeller Norway

    6 shared publications
  • Erik Unneberg

    Land Systems Division Norwegian Defence Research Establishment (FFI) P.O. Box 25 2027 Kjeller Norway

    5 shared publications
  • Eva Landsem

    Norwegian Defence Research Establishment (FFI), P. O. Box 25, 2027 Kjeller, Norway

    3 shared publications
  • Finn K. Hansen

    Norwegian Defence Research Establishment (FFI), P. O. Box 25, 2027 Kjeller, Norway

    3 shared publications
  • Erik Unneberg

    Norwegian Defence Research Establishment (FFI), Land Systems Division, Kjeller, Norway

    1 shared publication
  • Kim A Fredriksen

    Department of Chemistry, University of Oslo, P.O. Box 1033 Blindern, NO-0315 Oslo, Norway

    1 shared publication

Latest Publications

  • Open Access

    Chemoselective O-acylation of hydroxyamino acids and amino alcohols under acidic reaction conditions: History, scope and applications

    by Tor E Kristensen

    Amino acids, whether natural, semisynthetic or synthetic, are among the most important and useful chiral building blocks available for organic chemical synthesis. In principle, they can function as inexpensive, chiral and densely functionalized starting materials. On the other hand, the use of amino acid starting materials routinely necessitates protective group chemistry, and in reality, large-scale preparations of even the simplest side-chain derivatives of many amino acids often become annoyingly strenuous due to the necessity of employing protecting groups, on one or more of the amino acid functionalities, during the synthetic sequence. However, in the case of hydroxyamino acids such as hydroxyproline, serine, threonine, tyrosine and 3,4-dihydroxyphenylalanine (DOPA), many O-acyl side-chain derivatives are directly accessible via a particularly expedient and scalable method not commonly applied until recently. Direct acylation of unprotected hydroxyamino acids with acyl halides or carboxylic anhydrides under appropriately acidic reaction conditions renders possible chemoselective O-acylation, furnishing the corresponding side-chain esters directly, on multigram-scale, in a single step, and without chromatographic purification. Assuming a certain degree of stability under acidic reaction conditions, the method is also applicable for a number of related compounds, such as various amino alcohols and the thiol-functional amino acid cysteine. While the basic methodology underlying this approach has been known for decades, it has evolved through recent developments connected to amino acid-derived chiral organocatalysts to become a more widely recognized procedure for large-scale preparation of many useful side-chain derivatives of hydroxyamino acids and related compounds. Such derivatives are useful in peptide chemistry and drug development, as amino acid amphiphiles for asymmetric catalysis, and as amino acid acrylic precursors for preparation of catalytically active macromolecular networks in the form of soluble polymers, crosslinked polymer beads or nanoparticulate systems. The objective of the present review is to increase awareness of the existence and convenience of this methodology, assess its competitiveness compared to newer and more elaborate procedures for chemoselective O-acylation reactions, spur its further development, and finally to chronicle the informative, but poorly documented history of its development.


  • Curing of Glycidyl Azide Polymer (GAP) Diol Using Isocyanate, Isocyanate‐Free, Synchronous Dual, and Sequential Dual Curing Systems

    by Trond H. Hagen, Tomas L. Jensen, Erik Unneberg, Yngve H. Stenstrøm, Tor E. Kristensen

    Glycidyl azide polymer (GAP) is an important energetic binder candidate for new minimum signature solid composite rocket propellants, but the mechanical properties of such GAP propellants are often limited. The mechanical characteristics of composite rocket propellants are mainly determined by the nature of the binder system and the binder‐filler interactions. In this work, we report a detailed investigation into curing systems for GAP diol with the objective of attaining the best possible mechanical characteristics as evaluated by uniaxial tensile testing of non‐plasticized polymer specimens. We started out by investigating isocyanate and isocyanate‐free curing systems, the latter by using the crystalline and easily soluble alkyne curing agent bispropargylhydroquinone (BPHQ). In the course of the presented study, we then assessed the feasibility of dual curing systems, either by using BPHQ and isophorone diisocyanate (IPDI) simultaneously (synchronous dual curing), or by applying propargyl alcohol and IPDI consecutively (sequential dual curing). The latter method, which employs propargyl alcohol as a readily available and adjustable hydroxyl‐telechelic branching agent for GAP through thermal triazole formation, gave rise to polymer specimens with mechanical characteristics that compared favorably with the best polymer specimens obtained from GAP diol and mixed isocyanate curatives. The glass transition temperature (Tg) of non‐plasticized samples was heightened when triazole‐based curing agents were included, but when plasticized with nitratoethylnitramine (NENA) plasticizer, Tg values were very similar, irrespective of the curing method.


  • Isocyanate‐Free and Dual Curing of Smokeless Composite Rocket Propellants

    by Eva Landsem, Tomas L. Jensen, Tor E. Kristensen, Finn K. Hansen, Tore Benneche, Erik Unneberg

    Traditional composite rocket propellants are cured by treatment of hydroxyl‐terminated prepolymers with polyfunctional aliphatic isocyanates. For development of smokeless composite propellants containing nitramines and/or ammonium dinitramide (ADN), energetic binder systems using glycidyl azide polymer (GAP) are of particular interest. Polyfunctional alkynes are potential isocyanate‐free curing agents for GAP through thermal azide‐alkyne cycloaddition and subsequent formation of triazole crosslinkages. Propargyl succinate or closely related aliphatic derivatives have previously been reported for such isocyanate‐free curing of GAP. Herein, we present the synthesis and use of a new aromatic alkyne curing agent, the crystalline solid bisphenol A bis(propargyl ether) (BABE), as isocyanate‐free curing agent in smokeless propellants based on GAP, using either octogen (HMX) and/or prilled ADN as energetic filler materials. Thermal and mechanical properties, impact and friction sensitivity and ballistic characteristics were evaluated for these alkyne cured propellants. Improved mechanical properties could be obtained by combining isocyanate and alkyne curing agents (dual curing), a combination that imparted better mechanical properties in the cured propellants than either curing system did individually. The addition of a neutral polymeric bonding agent (NPBA) for improvement of binder‐filler interactions was also investigated using tensile testing and dynamic mechanical analysis (DMA). It was verified that the presence of isocyanates is essential for the NPBA to improve the mechanical properties of the propellants, further strengthening the attractiveness of dual cure systems.


  • Neutral Polymeric Bonding Agents (NPBA) and Their Use in Smokeless Composite Rocket Propellants Based on HMX‐GAP‐BuNENA

    by Eva Landsem, Tomas L. Jensen, Finn K. Hansen, Erik Unneberg, Tor E. Kristensen

    Very few efficient bonding agents for use in solid rocket propellants with nitramine filler materials and energetic binder systems are currently available. In this work, we report the synthesis, detailed characterization, and use of neutral polymeric bonding agents (NPBA) in isocyanate‐cured and smokeless composite rocket propellants based on the nitramine octogen (HMX), the energetic binder glycidyl azide polymer (GAP), and the energetic plasticizer N‐butyl‐2‐nitratoethylnitramine (BuNENA). These polymeric bonding agents clearly influenced the viscosity of the uncured propellant mixtures and provided significantly enhanced mechanical properties to the cured propellants, even at low NPBA concentrations (down to 0.001 wt‐% of propellant). A modified NPBA more or less free of hydroxyl functionalities for interactions with isocyanate curing agent provided the same level of mechanical improvement as regular NPBA containing a substantial number of reactive hydroxyl groups. However, some degree of reactivity towards isocyanate is essential for function.


  • Mechanical Properties of Smokeless Composite Rocket Propellants Based on Prilled Ammonium Dinitramide

    by Eva Landsem, Tomas L. Jensen, Finn K. Hansen, Erik Unneberg, Tor E. Kristensen

    Ammonium dinitramide (ADN) is a high performance solid oxidizer of interest for use in high impulse and smokeless composite rocket propellant formulations. While rocket propellants based on ADN may be both efficient, clean burning, and environmentally benign, ADN suffers from several notable disadvantages such as pronounced hygroscopicity, significant impact and friction sensitivity, moderate thermal instability, and numerous compatibility issues. Prilled ADN is now a commercially available and convenient product that addresses some of these disadvantages by lowering the specific surface area and thereby improving handling, processing, and stability. In this work, we report the preparation, friction and impact sensitivity and mechanical properties of several smokeless propellant formulations based on prilled ADN and isocyanate cured and plasticized glycidyl azide polymer (GAP) or polycaprolactone‐polyether. We found such propellants to have very poor mechanical properties in unmodified form and to display somewhat unreliable curing. However, by incorporation of octogen (HMX) and a neutral polymeric bonding agent (NPBA), the mechanical properties of such smokeless formulations were significantly improved. Impact and friction sensitivities of these propellants compare satisfactorily with conventional propellants based on ammonium perchlorate (AP) and inert binder systems.


  • Open Access

    Combined bead polymerization and Cinchona organocatalyst immobilization by thiol–ene addition

    by Kim A Fredriksen, Tor E Kristensen, Tore Hansen

    In this work, we report an unusually concise immobilization of Cinchona organocatalysts using thiol–ene chemistry, in which catalyst immobilization and bead polymerization is combined in a single step. A solution of azo initiator, polyfunctional thiol, polyfunctional alkene and an unmodified Cinchona-derived organocatalyst in a solvent is suspended in water and copolymerized on heating by thiol–ene additions. The resultant spherical and gel-type polymer beads have been evaluated as organocatalysts in catalytic asymmetric transformations.