Qi Jing
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Qi Jing has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Di Zhang
MOE Key Laboratory of Thermo-Fluid Science and Engineering, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China
5 shared publications - Yonghui Xie
State Key Laboratory for Strength and Vibration of Mechanical Structures, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China
4 shared publications Di Zhang
3 shared publicationsYonghui Xie
3 shared publicationsZhongyang Shen
School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an 710049, China
3 shared publicationsMa Jiao-Bin
Xi’an Jiaotong University, School of Energy and Power Engineering, MOE Key Laboratory of Thermo-Fluid Science and Engineering, Xi’an, China
1 shared publication
Latest Publications
- Open Access
- 19 July 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (14) , 2900
Effects of Channel Outlet Configuration and Dimple/Protrusion Arrangement on the Blade Trailing Edge Cooling Performance
The trailing edge regions of high-temperature gas turbine blades are subjected to extremely high thermal loads and are affected by the external wake flow during operation, thus creating great challenges in internal cooling design. With the development of cooling technology, the dimple and protrusion have attracted wide attention for its excellent performance in heat transfer enhancement and flow resistance reduction. Based on the typical internal cooling structure of the turbine blade trailing edge, trapezoidal cooling channels with lateral extraction slots are modeled in this paper. Five channel outlet configurations, i.e., no second passage (OC1), radially inward flow second passage (OC2), radially outward flow second passage (OC3), top region outflow (OC4), both sides extractions (OC5), and three dimple/protrusion arrangements (all dimple, all protrusion, dimple–protrusion staggered arrangement) are considered. Numerical investigations are carried out, within the Re range of 10,000–100,000, to analyze the flow structures, heat transfer distributions, average heat transfer and friction characteristics and overall thermal performances in detail. The results show that the OC4 and OC5 cases have high heat transfer levels in general, while the heat transfer deterioration occurs in the OC1, OC2, and OC3 cases. For different dimple/protrusion arrangements, the protrusion case produces the best overall thermal performance. In conclusion, for the design of trailing edge cooling structures with lateral slots, the outlet configurations of top region outflow and both sides extractions, and the all protrusion arrangement, are recommended.
- 19 July 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (14) , 2900
Open AccessEffects of Channel Outlet Configuration and Dimple/Protrusion Arrangement on the Blade Trailing Edge Cooling Performance
The trailing edge regions of high-temperature gas turbine blades are subjected to extremely high thermal loads and are affected by the external wake flow during operation, thus creating great challenges in internal cooling design. With the development of cooling technology, the dimple and protrusion have attracted wide attention for its excellent performance in heat transfer enhancement and flow resistance reduction. Based on the typical internal cooling structure of the turbine blade trailing edge, trapezoidal cooling channels with lateral extraction slots are modeled in this paper. Five channel outlet configurations, i.e., no second passage (OC1), radially inward flow second passage (OC2), radially outward flow second passage (OC3), top region outflow (OC4), both sides extractions (OC5), and three dimple/protrusion arrangements (all dimple, all protrusion, dimple–protrusion staggered arrangement) are considered. Numerical investigations are carried out, within the Re range of 10,000–100,000, to analyze the flow structures, heat transfer distributions, average heat transfer and friction characteristics and overall thermal performances in detail. The results show that the OC4 and OC5 cases have high heat transfer levels in general, while the heat transfer deterioration occurs in the OC1, OC2, and OC3 cases. For different dimple/protrusion arrangements, the protrusion case produces the best overall thermal performance. In conclusion, for the design of trailing edge cooling structures with lateral slots, the outlet configurations of top region outflow and both sides extractions, and the all protrusion arrangement, are recommended.
- Open Access
- 28 January 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (3) , 432
An Investigation on the Forced Convection of Al2O3-water Nanofluid Laminar Flow in a Microchannel Under Interval Uncertainties
Nanofluids are regarded as an effective cooling medium with tremendous potential in heat transfer enhancement. In reality, nanofluids in microchannels are at the mercy of uncertainties unavoidably due to manufacturing error, dispersion of physical properties, and inconstant operating conditions. To obtain a deeper understanding of forced convection of nanofluids in microchannels, uncertainties are suggested to be considered. This paper studies numerically the uncertain forced convection of Al2O3-water nanofluid laminar flow in a grooved microchannel. Uncertainties in material properties and geometrical parameter are considered. The uncertainties are represented by interval variables. By employing Chebyshev polynomial approximation, interval method (IM) is presented to estimate the uncertain thermal performance and flow behavior of the forced convection problem. The validation of the accuracy and effectiveness of IM are demonstrated by a comparison with the scanning method (SM). The variation of temperature, velocity, and Nusselt number are obtained under different interval uncertainties. The results show that the uncertainties have remarkable influences on the simulated thermal performance and flow behavior.
- 28 January 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (3) , 432
Open AccessAn Investigation on the Forced Convection of Al2O3-water Nanofluid Laminar Flow in a Microchannel Under Interval Uncertainties
Nanofluids are regarded as an effective cooling medium with tremendous potential in heat transfer enhancement. In reality, nanofluids in microchannels are at the mercy of uncertainties unavoidably due to manufacturing error, dispersion of physical properties, and inconstant operating conditions. To obtain a deeper understanding of forced convection of nanofluids in microchannels, uncertainties are suggested to be considered. This paper studies numerically the uncertain forced convection of Al2O3-water nanofluid laminar flow in a grooved microchannel. Uncertainties in material properties and geometrical parameter are considered. The uncertainties are represented by interval variables. By employing Chebyshev polynomial approximation, interval method (IM) is presented to estimate the uncertain thermal performance and flow behavior of the forced convection problem. The validation of the accuracy and effectiveness of IM are demonstrated by a comparison with the scanning method (SM). The variation of temperature, velocity, and Nusselt number are obtained under different interval uncertainties. The results show that the uncertainties have remarkable influences on the simulated thermal performance and flow behavior.
- 1 November 2018
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 126, 169-190
Numerical investigations of impingement cooling performance on flat and non-flat targets with dimple/protrusion and triangular rib
- 1 November 2018
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 126, 169-190
Numerical investigations of impingement cooling performance on flat and non-flat targets with dimple/protrusion and triangular rib
- 15 March 2017
- Published by Wiley in Journal of Heat Transfer
- Vol. 139 (5) , 052202
Thermal Performance of Miniscale Heat Sink With Jet Impingement and Dimple/Protrusion Structure
Cooling technique in a miniscale heat sink is essential with the development of high-power electronics, such as electronic chip. As heat transfer techniques, jet impingement cooling and convective cooling by roughened surface are commonly adopted. To obtain a good cooling efficiency, the cooling structure within the heat sink should be carefully designed. In the present study, the miniscale heat sink with a feature size of 1–100 mm is setup. Arrangement of the jet impingement and dimple/protrusion surface is designed as heat transfer augmentation approaches. The effect of dimple/protrusion configuration and depth to diameter ratio is discussed. From the result, the heat transfer coefficient h distribution of heat sink surface is demonstrated for each case. The pressure penalty due to the arrangement of roughened structure is evaluated. Also, thermal performance (TP) and performance evaluation plot are adopted as evaluations of cooling performance for each configuration. Comparing all the cases, optimal cooling structure considering the energy-saving performance is obtained for the miniscale heat sink. Referencing the statistics, a new insight has been provided for the design of cooling structure inside the miniscale heat sink.
- 15 March 2017
- Published by Wiley in Journal of Heat Transfer
- Vol. 139 (5) , 052202
Thermal Performance of Miniscale Heat Sink With Jet Impingement and Dimple/Protrusion Structure
Cooling technique in a miniscale heat sink is essential with the development of high-power electronics, such as electronic chip. As heat transfer techniques, jet impingement cooling and convective cooling by roughened surface are commonly adopted. To obtain a good cooling efficiency, the cooling structure within the heat sink should be carefully designed. In the present study, the miniscale heat sink with a feature size of 1–100 mm is setup. Arrangement of the jet impingement and dimple/protrusion surface is designed as heat transfer augmentation approaches. The effect of dimple/protrusion configuration and depth to diameter ratio is discussed. From the result, the heat transfer coefficient h distribution of heat sink surface is demonstrated for each case. The pressure penalty due to the arrangement of roughened structure is evaluated. Also, thermal performance (TP) and performance evaluation plot are adopted as evaluations of cooling performance for each configuration. Comparing all the cases, optimal cooling structure considering the energy-saving performance is obtained for the miniscale heat sink. Referencing the statistics, a new insight has been provided for the design of cooling structure inside the miniscale heat sink.
- 20 September 2016
- Published by Taylor & Francis in Numerical Heat Transfer, Part A: Applications
- Vol. 70 (9) , 1021-1040
Numerical prediction on turbine blade internal tip cooling with pin-fin and dimple/protrusion structures
Effective cooling techniques are required urgently because of high thermal loads on the blade tip region. The 180° turning bend is recognized to perform well in heat transfer on a blade tip. The thermal fluid-solid coupling models of the internal tip region with pin-fin-dimples/protrusions are established in the present paper. The local flow characteristics near the 180° turning bend, average Nu/Nu0, and the friction loss on the impingement surfaces are obtained. The local flow field near the tip surface is influenced by the 180° turning bend, where the fluid impingement, cross-flow convection and deflection of the secondary flow exist. The average Nu of dimple/protrusion structures is increased by 3.2%-31.5% comparing to that of a smooth case. After arranging pin-fin-dimple/protrusion, the average Nu is increased to 31.2%-127.3%, much higher than dimple/protrusion structures. Furthermore, the arrangement of pin-fin-dimple/protrusion brings no significant increase in the friction, which indicates an efficient heat transfer structure with little resistance.
- 20 September 2016
- Published by Taylor & Francis in Numerical Heat Transfer, Part A: Applications
- Vol. 70 (9) , 1021-1040
Numerical prediction on turbine blade internal tip cooling with pin-fin and dimple/protrusion structures
Effective cooling techniques are required urgently because of high thermal loads on the blade tip region. The 180° turning bend is recognized to perform well in heat transfer on a blade tip. The thermal fluid-solid coupling models of the internal tip region with pin-fin-dimples/protrusions are established in the present paper. The local flow characteristics near the 180° turning bend, average Nu/Nu0, and the friction loss on the impingement surfaces are obtained. The local flow field near the tip surface is influenced by the 180° turning bend, where the fluid impingement, cross-flow convection and deflection of the secondary flow exist. The average Nu of dimple/protrusion structures is increased by 3.2%-31.5% comparing to that of a smooth case. After arranging pin-fin-dimple/protrusion, the average Nu is increased to 31.2%-127.3%, much higher than dimple/protrusion structures. Furthermore, the arrangement of pin-fin-dimple/protrusion brings no significant increase in the friction, which indicates an efficient heat transfer structure with little resistance.
- 4 January 2016
- Published by ASME International
Thermal Performance of Mini-Scale Heat Sink With Jet Impingement and Roughened Surface
Cooling technique in mini-scale heat sink is essential with the development of high power electronics such as electronic chip. As heat transfer techniques, jet impingement cooling and convective cooling by roughened surface are commonly adopted. To obtain good cooling efficiency, the cooling structure within the heat sink should be carefully designed. In the present study, mini-scale heat sink with feature size of 1∼10 mm is set up. Arrangement of jet impingement and dimple/protrusion surface are designed as heat transfer augmentation approaches. The effect of dimple/protrusion configuration is discussed. From the result, the Nu distribution of on heat sink surface is demonstrated for each case. The pressure penalty due to the arrangement of roughened structure is evaluated. Also, thermal performance TP and performance evaluation plot are adopted as evaluations of cooling performance for each configuration. Comparing all cases, optimal cooling structure considering the energy saving performance is obtained for the mini-scale heat sink. Referencing the statistics, new insight has been provided for the design of cooling structure inside mini-scale heat sink.
- 4 January 2016
- Published by ASME International
Thermal Performance of Mini-Scale Heat Sink With Jet Impingement and Roughened Surface
Cooling technique in mini-scale heat sink is essential with the development of high power electronics such as electronic chip. As heat transfer techniques, jet impingement cooling and convective cooling by roughened surface are commonly adopted. To obtain good cooling efficiency, the cooling structure within the heat sink should be carefully designed. In the present study, mini-scale heat sink with feature size of 1∼10 mm is set up. Arrangement of jet impingement and dimple/protrusion surface are designed as heat transfer augmentation approaches. The effect of dimple/protrusion configuration is discussed. From the result, the Nu distribution of on heat sink surface is demonstrated for each case. The pressure penalty due to the arrangement of roughened structure is evaluated. Also, thermal performance TP and performance evaluation plot are adopted as evaluations of cooling performance for each configuration. Comparing all cases, optimal cooling structure considering the energy saving performance is obtained for the mini-scale heat sink. Referencing the statistics, new insight has been provided for the design of cooling structure inside mini-scale heat sink.
- Open Access
- 1 January 2016
- Published by National Library of Serbia in Thermal Science
- Vol. 20 (suppl. 3) , 669-676
Numerical study of unsteady flow and exciting force for swept turbomachinery blades
The aerodynamic performance of blade affects the vibration characteristics and stable operation of turbomachinery closely. The aerodynamic performance of turbine stage can be improved by using swept blade. In this paper, the RANS method and the RNG k-ε turbulence mode were adopted to investigate the unsteady flow characteristics and excitation force of swept blade stage. According to the results, for the swept blade, the fluid of boundary layer shifts in radial direction due to the influence of geometric construction. It is observed that there is similar wake development for several kinds of stators, and the wake has a notable effect on the boundary layer of the rotor blades. When compared with straight blade, pressure fluctuation of forward-swept blade is decreased while the pressure fluctuation of backward-swept blade is increased. The axial and tangential fundamental frequency excitation force factors of 15°forward-swept blade are 0.139 and 0.052 respectively, which are the least, and all excitation force factors are in the normal range. The excitation factor of the forward-swept blade is decreased compared with straight blade, and the decreasing percentage is closely related to the swept angle. As for backward-swept blades, the situation is the other way around. Additionally, the change of axial excitation factor is more obvious. So the vibration reduction performance of forward-swept blade is better.
- 1 January 2016
- Published by National Library of Serbia in Thermal Science
- Vol. 20 (suppl. 3) , 669-676
Open AccessNumerical study of unsteady flow and exciting force for swept turbomachinery blades
The aerodynamic performance of blade affects the vibration characteristics and stable operation of turbomachinery closely. The aerodynamic performance of turbine stage can be improved by using swept blade. In this paper, the RANS method and the RNG k-ε turbulence mode were adopted to investigate the unsteady flow characteristics and excitation force of swept blade stage. According to the results, for the swept blade, the fluid of boundary layer shifts in radial direction due to the influence of geometric construction. It is observed that there is similar wake development for several kinds of stators, and the wake has a notable effect on the boundary layer of the rotor blades. When compared with straight blade, pressure fluctuation of forward-swept blade is decreased while the pressure fluctuation of backward-swept blade is increased. The axial and tangential fundamental frequency excitation force factors of 15°forward-swept blade are 0.139 and 0.052 respectively, which are the least, and all excitation force factors are in the normal range. The excitation factor of the forward-swept blade is decreased compared with straight blade, and the decreasing percentage is closely related to the swept angle. As for backward-swept blades, the situation is the other way around. Additionally, the change of axial excitation factor is more obvious. So the vibration reduction performance of forward-swept blade is better.