Casimir W. Nooitgedacht
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Casimir W. Nooitgedacht has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Jeroen van der Lubbe
Vrije Universiteit Amsterdam
4 shared publications - John J. G. Reijmer
Vrije Universiteit Amsterdam
3 shared publications - Philip Tauxe Staudigel
International Ocean Discovery Program IODP JOIDES Resolution Expedition 400 NW Greenland
3 shared publications - Hubert Vonhof
Climate Geochemistry Department, Max Planck Institute for Chemistry, Hahn-Meitner-Weg 1, 55128 Mainz, Germany
2 shared publications - Martin Ziegler
Department of Earth Sciences, Utrecht University, Utrecht, The Netherlands
2 shared publications A. J. Davies
Institute of Geosciences Goethe University Frankfurt Frankfurt am Main Germany
1 shared publication
Latest Publications
- Open Access
- 9 February 2023
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 24 (2)
Fingerprinting Kinetic Isotope Effects and Diagenetic Exchange Reactions Using Fluid Inclusion and Dual‐Clumped Isotope Analysis
Geochemical analyses of carbonate minerals yield multiple parameters which can be used to estimate the temperature and water composition at which they formed. Analysis of fluid trapped in minerals is a potentially powerful tool to reconstruct paleotemperatures as well as diagenetic and hydrothermal processes, as these could represent the parent fluid. Internal fluids play important roles during the alteration of carbonate fossils, lowering energetic barriers associated with resetting of clumped isotopes, as well as mediating the transport of elements during diagenesis. Here, we explore the behavior of the ∆47–∆48 “dual‐clumped” isotope thermometer during fluid‐carbonate interaction and demonstrate that it is highly sensitive to the water/carbonate ratio, behaving as a linear system in “rock buffered” alteration, and as a decoupled system in water‐dominated systems due to non‐linear mixing effects in ∆48. Dry heating experiments show that the extrapolated “heated” end‐member is indistinguishable from the predicted ∆47 and ∆48 value expected for the experimental temperature. Furthermore, we evaluate two common laboratory sampling methods for their ability to thermally alter samples. We find that the temperature of the commonly used crushing cells used to vapourize water for fluid inclusion δ18O analyses is insufficient to cause fluid‐carbonate oxygen isotope exchange, demonstrating its suitability for analyses of fluid inclusions in carbonates. We also find that belemnites sampled with a hand‐drill yield significantly warmer paleotemperatures than those sampled with mortar and pestle. We conclude that thermally‐driven internal fluid‐carbonate exchange occurs indistinguishably from isotopic equilibrium, limited by the extent to which internal water and carbonate can react.
- 9 February 2023
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 24 (2)
Open AccessFingerprinting Kinetic Isotope Effects and Diagenetic Exchange Reactions Using Fluid Inclusion and Dual‐Clumped Isotope Analysis
Geochemical analyses of carbonate minerals yield multiple parameters which can be used to estimate the temperature and water composition at which they formed. Analysis of fluid trapped in minerals is a potentially powerful tool to reconstruct paleotemperatures as well as diagenetic and hydrothermal processes, as these could represent the parent fluid. Internal fluids play important roles during the alteration of carbonate fossils, lowering energetic barriers associated with resetting of clumped isotopes, as well as mediating the transport of elements during diagenesis. Here, we explore the behavior of the ∆47–∆48 “dual‐clumped” isotope thermometer during fluid‐carbonate interaction and demonstrate that it is highly sensitive to the water/carbonate ratio, behaving as a linear system in “rock buffered” alteration, and as a decoupled system in water‐dominated systems due to non‐linear mixing effects in ∆48. Dry heating experiments show that the extrapolated “heated” end‐member is indistinguishable from the predicted ∆47 and ∆48 value expected for the experimental temperature. Furthermore, we evaluate two common laboratory sampling methods for their ability to thermally alter samples. We find that the temperature of the commonly used crushing cells used to vapourize water for fluid inclusion δ18O analyses is insufficient to cause fluid‐carbonate oxygen isotope exchange, demonstrating its suitability for analyses of fluid inclusions in carbonates. We also find that belemnites sampled with a hand‐drill yield significantly warmer paleotemperatures than those sampled with mortar and pestle. We conclude that thermally‐driven internal fluid‐carbonate exchange occurs indistinguishably from isotopic equilibrium, limited by the extent to which internal water and carbonate can react.
- Open Access
- 25 May 2021
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 22 (5)
Internal Water Facilitates Thermal Resetting of Clumped Isotopes in Biogenic Aragonite
Biogenic and inorganic calcium carbonates contain considerable amounts of internal water, both as free and organically associated water. The oxygen isotopic compositions (δ18O) of internal water and hosting carbonate are analyzed for various carbonates before and after heating at 175°C for 90 minutes. During heating, the δ18O values of internal water significantly increased in biogenic aragonites and speleothem calcite, whereas the δ18O carbonate values were lowered. Correspondingly, an aragonitic bivalve’s clumped‐isotope distribution (Δ47) changed during heating, increasing reconstructed paleotemperatures. In contrast, an inorganic aragonite crystal, containing a comparable amount of internal water, showed no oxygen isotope exchange, and its Δ47 values remained unaltered during heating, implying that there is a link between internal oxygen isotope exchange and Δ47 resetting. This alteration process occurred without any detectable transformation from aragonite to calcite. Our results therefore reveal a mechanism that facilitates oxygen isotope exchange between biogenic aragonite and its internal water, while simultaneously resetting the Δ47 values, without affecting mineralogy. Future studies may therefore apply coupled water‐carbonate analyses to scrutinize these kinds of diagenetic alteration processes. It appears that in biogenic aragonites, more carbonate is available for exchange reactions with the internal water reservoir than in inorganic aragonites, a feature that can be attributed to the distribution of organic‐associated water and/or high surface area fluid inclusions. This water‐aragonite exchange occurs at lower temperatures than those required for solid‐state bond reordering at the same timescale, and thus likely has occurred earlier during the burial of biogenic aragonites.
- 25 May 2021
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 22 (5)
Open AccessInternal Water Facilitates Thermal Resetting of Clumped Isotopes in Biogenic Aragonite
Biogenic and inorganic calcium carbonates contain considerable amounts of internal water, both as free and organically associated water. The oxygen isotopic compositions (δ18O) of internal water and hosting carbonate are analyzed for various carbonates before and after heating at 175°C for 90 minutes. During heating, the δ18O values of internal water significantly increased in biogenic aragonites and speleothem calcite, whereas the δ18O carbonate values were lowered. Correspondingly, an aragonitic bivalve’s clumped‐isotope distribution (Δ47) changed during heating, increasing reconstructed paleotemperatures. In contrast, an inorganic aragonite crystal, containing a comparable amount of internal water, showed no oxygen isotope exchange, and its Δ47 values remained unaltered during heating, implying that there is a link between internal oxygen isotope exchange and Δ47 resetting. This alteration process occurred without any detectable transformation from aragonite to calcite. Our results therefore reveal a mechanism that facilitates oxygen isotope exchange between biogenic aragonite and its internal water, while simultaneously resetting the Δ47 values, without affecting mineralogy. Future studies may therefore apply coupled water‐carbonate analyses to scrutinize these kinds of diagenetic alteration processes. It appears that in biogenic aragonites, more carbonate is available for exchange reactions with the internal water reservoir than in inorganic aragonites, a feature that can be attributed to the distribution of organic‐associated water and/or high surface area fluid inclusions. This water‐aragonite exchange occurs at lower temperatures than those required for solid‐state bond reordering at the same timescale, and thus likely has occurred earlier during the burial of biogenic aragonites.
- Open Access
- 4 March 2021
- Published by Copernicus GmbH
Application of combined fluid-inclusion and clumped isotope thermometry to biogenic and inorganic carbonates
Biogenic and inorganic carbonates are widely used to reconstruct past temperatures and fluid compositions. For decades, calcification temperatures have been inferred from oxygen isotope composition (δ18O) of calcium carbonates (CaCO3) assuming the δ18O of the parental fluid and isotopic equilibrium precipitation conditions. The development of the clumped isotope (Δ47) thermometer allows for reconstructing equilibrium calcification temperatures without requiring a priori knowledge of the water δ18O values.Carbonate minerals can also contain several weight percentages of water, which are typically trapped within microscopic pores. These fluid-inclusions may preserve remnants of the parental fluid, which can be analyzed for the δ18O as well as hydrogen isotopic (δ2H) composition. Subsequently, the δ18O of fluid-inclusion and host carbonate may allow for the determination of paleotemperatures by providing constraint on the δ18O water value.Reasonable equilibrium temperatures can be obtained for speleothem calcites from cave systems. On the contrary, anomalously high temperatures are derived from δ18O fluid-inclusion and calcite pairs in soil carbonates possibly suggesting diffusion of trapped water from host CaCO3. Deeply-buried and subsequently exhumed (inorganic) calcite veins have yielded discrepant paleotemperature estimates between fluid-inclusion and Δ47 thermometers. The distinctly lower fluid-inclusion derived temperatures might be attributed to kinetic fraction during initial vein cementation and/or isotopic re-equilibration between fluid-inclusions and CaCO3 at lower temperatures during uplift.Heating experiments demonstrate that the oxygen isotope exchange between fluid inclusions and host carbonate is limited for inorganic calcite and aragonite at high temperatures (175oC) for short timescales (90 minutes). In contrast, considerable positive shifts in the δ18O of fluid inclusions have been recorded in biogenic aragonites during experimental heating, which coincide with lower carbonate δ18O values (albeit to a lesser extent due to the overwhelming amount of oxygen in the CaCO3), indicative of re-equilibration between host carbonate and pore fluids. This effect leads to apparently high equilibrium temperatures. In conjunction, the Δ47 derived temperatures do not change significantly after heating of inorganic aragonite, whereas a considerable higher Δ47 temperature is derived from aragonitic bivalve samples after heating. The positive shift in both thermometers has interpreted to reflect re-crystallization of CaCO3 and isotopic re-equilibration between the host carbonate and fluid-inclusions. This exchange might be facilitated by extremely small fluid-inclusions present in biogenic carbonates and/or water associated with organic substances.Importantly, these isotopic exchange processes in biogenic aragonites took place in the absence of an external fluid and below the temperature thresholds for solid-state-reordering and the aragonite-to-calcite transition. The novel application of combined fluid-inclusion and clumped isotope thermometry has a proven utility in determining equilibrium precipitation temperatures, monitoring preservation of the primary fluid-inclusions and re-crystallization processes during diagenesis. However, additional experiments and analytical improvements are needed to further constrain the diagenetic behavior of this proxy.
- 4 March 2021
- Published by Copernicus GmbH
Open AccessApplication of combined fluid-inclusion and clumped isotope thermometry to biogenic and inorganic carbonates
Biogenic and inorganic carbonates are widely used to reconstruct past temperatures and fluid compositions. For decades, calcification temperatures have been inferred from oxygen isotope composition (δ18O) of calcium carbonates (CaCO3) assuming the δ18O of the parental fluid and isotopic equilibrium precipitation conditions. The development of the clumped isotope (Δ47) thermometer allows for reconstructing equilibrium calcification temperatures without requiring a priori knowledge of the water δ18O values.Carbonate minerals can also contain several weight percentages of water, which are typically trapped within microscopic pores. These fluid-inclusions may preserve remnants of the parental fluid, which can be analyzed for the δ18O as well as hydrogen isotopic (δ2H) composition. Subsequently, the δ18O of fluid-inclusion and host carbonate may allow for the determination of paleotemperatures by providing constraint on the δ18O water value.Reasonable equilibrium temperatures can be obtained for speleothem calcites from cave systems. On the contrary, anomalously high temperatures are derived from δ18O fluid-inclusion and calcite pairs in soil carbonates possibly suggesting diffusion of trapped water from host CaCO3. Deeply-buried and subsequently exhumed (inorganic) calcite veins have yielded discrepant paleotemperature estimates between fluid-inclusion and Δ47 thermometers. The distinctly lower fluid-inclusion derived temperatures might be attributed to kinetic fraction during initial vein cementation and/or isotopic re-equilibration between fluid-inclusions and CaCO3 at lower temperatures during uplift.Heating experiments demonstrate that the oxygen isotope exchange between fluid inclusions and host carbonate is limited for inorganic calcite and aragonite at high temperatures (175oC) for short timescales (90 minutes). In contrast, considerable positive shifts in the δ18O of fluid inclusions have been recorded in biogenic aragonites during experimental heating, which coincide with lower carbonate δ18O values (albeit to a lesser extent due to the overwhelming amount of oxygen in the CaCO3), indicative of re-equilibration between host carbonate and pore fluids. This effect leads to apparently high equilibrium temperatures. In conjunction, the Δ47 derived temperatures do not change significantly after heating of inorganic aragonite, whereas a considerable higher Δ47 temperature is derived from aragonitic bivalve samples after heating. The positive shift in both thermometers has interpreted to reflect re-crystallization of CaCO3 and isotopic re-equilibration between the host carbonate and fluid-inclusions. This exchange might be facilitated by extremely small fluid-inclusions present in biogenic carbonates and/or water associated with organic substances.Importantly, these isotopic exchange processes in biogenic aragonites took place in the absence of an external fluid and below the temperature thresholds for solid-state-reordering and the aragonite-to-calcite transition. The novel application of combined fluid-inclusion and clumped isotope thermometry has a proven utility in determining equilibrium precipitation temperatures, monitoring preservation of the primary fluid-inclusions and re-crystallization processes during diagenesis. However, additional experiments and analytical improvements are needed to further constrain the diagenetic behavior of this proxy.
- Open Access
- 15 October 2019
- Published by American Association of Petroleum Geologists AAPG/Datapages in AAPG Bulletin
- Vol. 103 (10) , 2421-2445
Fluid-flow evolution in the Albanide fold-thrust belt: Insights from hydrogen and oxygen isotope ratios of fluid inclusions
Tectonic forces generated during thrust emplacement along active margins may drive complex fluid-flow patterns in fold-thrust belts and foreland basins. Isotope data (δ2H and δ18O) of fluid inclusions hosted in calcite vein cements are used to reconstruct regional fluid migration pathways in the Albanide fold-thrust system. The calcite veins used in this study developed in a sequence of naturally fractured Cretaceous–Eocene carbonate rocks as a result of episodic throughput of fluids from the early stages of burial onward. The acquired fluid inclusion isotope data demonstrate that fluids circulating in the carbonates were derived from an underlying reservoir that consisted of a mixture of meteoric water and evolved marine fluids, probably derived from deep-seated evaporites. The meteoric fluids infiltrated in the hinterland before being driven outward into the foreland basin and ascended as soon as fracturing induced a sufficient increase in permeability. Structural and petrographic observations provide time constraints for the various phases of fracture infilling and reveal an increasing dominance of meteoric water in the system through time as migration pathways shortened and marine formation fluids were progressively flushed out. Similar fluid-flow evolutions have previously been recorded in various fold-thrust belt settings elsewhere in the world.
- 15 October 2019
- Published by American Association of Petroleum Geologists AAPG/Datapages in AAPG Bulletin
- Vol. 103 (10) , 2421-2445
Open AccessFluid-flow evolution in the Albanide fold-thrust belt: Insights from hydrogen and oxygen isotope ratios of fluid inclusions
Tectonic forces generated during thrust emplacement along active margins may drive complex fluid-flow patterns in fold-thrust belts and foreland basins. Isotope data (δ2H and δ18O) of fluid inclusions hosted in calcite vein cements are used to reconstruct regional fluid migration pathways in the Albanide fold-thrust system. The calcite veins used in this study developed in a sequence of naturally fractured Cretaceous–Eocene carbonate rocks as a result of episodic throughput of fluids from the early stages of burial onward. The acquired fluid inclusion isotope data demonstrate that fluids circulating in the carbonates were derived from an underlying reservoir that consisted of a mixture of meteoric water and evolved marine fluids, probably derived from deep-seated evaporites. The meteoric fluids infiltrated in the hinterland before being driven outward into the foreland basin and ascended as soon as fracturing induced a sufficient increase in permeability. Structural and petrographic observations provide time constraints for the various phases of fracture infilling and reveal an increasing dominance of meteoric water in the system through time as migration pathways shortened and marine formation fluids were progressively flushed out. Similar fluid-flow evolutions have previously been recorded in various fold-thrust belt settings elsewhere in the world.
- 3 May 2017
- Published by Wiley in Basin Research
- Vol. 30 (S1) , 596-612
New insights in the development of syn‐depositional fractures in rimmed flat‐topped carbonate platforms, Neogene carbonate complexes, Sorbas Basin, SE Spain
The formation of syn‐depositional fractures in carbonate platforms is considered an important feature in the understanding of platform evolution. This study investigates the mechanisms of fracture formation in rimmed flat‐topped carbonate platforms in the very well‐exposed Cariatiz Miocene Fringing Reef Unit, SE Spain. Fracture data were obtained using a combination of LIDAR and field mapping techniques, which proved useful in understanding general fracture trends. The morphological expression of fracture sets, preferred fracture localization, crosscutting relationships and fracture fill are characteristics that provide constraints on the timing of fracture formation and opening. Three dominant fracture populations were identified, amongst which a margin parallel and a margin perpendicular fracture set. Margin parallel fractures localize around the platform margin and form vertically extensive dikes that crosscut facies boundaries. The sedimentary fill of such fractures suggests syn‐depositional fracture formation under marine conditions. Together, fracture characteristics suggest a gravitational driver for the formation of tensile stress and the development of margin parallel fractures along the platform edge. Margin perpendicular structures form sub‐vertical dikes and fracture corridors. Margin perpendicular fractures localize on the platform slope and show two types of fracture fill, indicating marine and continental origins. Based on variations of fracture morphology along the carbonate platform, fracture localization, petrographic analysis of sedimentary fill and stable isotope analysis on sparite cements, we suggest a gravitational control on the formation of these fractures. Two mechanisms for the formation of subvertical margin perpendicular fractures are proposed: (1) principal stress rotation as a result of downslope loading. (2) Differential compaction over buried gulley systems on antecedent clinoform slopes. We suggest that the formation of sub‐vertical margin perpendicular fractures might be a systematic feature in slopes of flat‐topped carbonate platforms.
- 3 May 2017
- Published by Wiley in Basin Research
- Vol. 30 (S1) , 596-612
New insights in the development of syn‐depositional fractures in rimmed flat‐topped carbonate platforms, Neogene carbonate complexes, Sorbas Basin, SE Spain
The formation of syn‐depositional fractures in carbonate platforms is considered an important feature in the understanding of platform evolution. This study investigates the mechanisms of fracture formation in rimmed flat‐topped carbonate platforms in the very well‐exposed Cariatiz Miocene Fringing Reef Unit, SE Spain. Fracture data were obtained using a combination of LIDAR and field mapping techniques, which proved useful in understanding general fracture trends. The morphological expression of fracture sets, preferred fracture localization, crosscutting relationships and fracture fill are characteristics that provide constraints on the timing of fracture formation and opening. Three dominant fracture populations were identified, amongst which a margin parallel and a margin perpendicular fracture set. Margin parallel fractures localize around the platform margin and form vertically extensive dikes that crosscut facies boundaries. The sedimentary fill of such fractures suggests syn‐depositional fracture formation under marine conditions. Together, fracture characteristics suggest a gravitational driver for the formation of tensile stress and the development of margin parallel fractures along the platform edge. Margin perpendicular structures form sub‐vertical dikes and fracture corridors. Margin perpendicular fractures localize on the platform slope and show two types of fracture fill, indicating marine and continental origins. Based on variations of fracture morphology along the carbonate platform, fracture localization, petrographic analysis of sedimentary fill and stable isotope analysis on sparite cements, we suggest a gravitational control on the formation of these fractures. Two mechanisms for the formation of subvertical margin perpendicular fractures are proposed: (1) principal stress rotation as a result of downslope loading. (2) Differential compaction over buried gulley systems on antecedent clinoform slopes. We suggest that the formation of sub‐vertical margin perpendicular fractures might be a systematic feature in slopes of flat‐topped carbonate platforms.