Elena A. Badeeva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Elena A. Badeeva has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
Penza State University
12 shared publications- Tat'YAna I. Murashkina
Department of Instrumentation, Penza State University, Penza, Russian Federation
8 shared publications - Vladislav A. Badeev3 shared publications
- Aleksey Kukushkin2 shared publications
- Ekaterina A. Polyakova
Research Institute of Physical Measurements
2 shared publications - I. E. Slavkin2 shared publications
Latest Publications
- 1 January 2026
- Published by Publishing house "Radiotekhnika" in Biomedical Radioelectronics
- p. 24-29
Fiber-optic low-pressure sensors for space life support systems
To measure low pressure (measuring range 100...500 g/cm2) in narrow cavities and spaces with uneven surfaces of life support systems for aerospace objects, electrical measuring instruments are still used, which are unsafe for the health of astronauts, since an electrical breakdown of the electrical part of the measuring system of life support or electromagnetic effects from the measuring instrument on the human body. In addition to this fact, known pressure measuring instruments have large overall dimensions and a large (up to 30%) instrumental component of measurement error due to the interaction of the sensor with the measuring object. Work purpose – Development of small-sized low-pressure fiber-optic sensors operating in narrow cavities with uneven surfaces of life support systems for aerospace objects. Two designs of low-pressure fiber-optic sensors have been developed that implement a fiber-optic attenuator-reflective method for converting optical signals directly into a micro-optical-mechanical transducer system that combines the advantages of attenuator and reflective pressure transducers. It is proved that the special design of the sensing element and the outer casing of low-pressure waters can reduce the measurement error by 3...5 times. The developed high-precision low-pressure sensors of the attenuator-reflective principle of optical signal conversion can be used to measure low pressure in narrow cavities with uneven surfaces: in cosmonauts' spacesuits, in narrow pipelines of astronauts' life support systems and medical.
- 1 January 2026
- Published by Publishing house "Radiotekhnika" in Biomedical Radioelectronics
- p. 24-29
Fiber-optic low-pressure sensors for space life support systems
To measure low pressure (measuring range 100...500 g/cm2) in narrow cavities and spaces with uneven surfaces of life support systems for aerospace objects, electrical measuring instruments are still used, which are unsafe for the health of astronauts, since an electrical breakdown of the electrical part of the measuring system of life support or electromagnetic effects from the measuring instrument on the human body. In addition to this fact, known pressure measuring instruments have large overall dimensions and a large (up to 30%) instrumental component of measurement error due to the interaction of the sensor with the measuring object. Work purpose – Development of small-sized low-pressure fiber-optic sensors operating in narrow cavities with uneven surfaces of life support systems for aerospace objects. Two designs of low-pressure fiber-optic sensors have been developed that implement a fiber-optic attenuator-reflective method for converting optical signals directly into a micro-optical-mechanical transducer system that combines the advantages of attenuator and reflective pressure transducers. It is proved that the special design of the sensing element and the outer casing of low-pressure waters can reduce the measurement error by 3...5 times. The developed high-precision low-pressure sensors of the attenuator-reflective principle of optical signal conversion can be used to measure low pressure in narrow cavities with uneven surfaces: in cosmonauts' spacesuits, in narrow pipelines of astronauts' life support systems and medical.
- 1 January 2025
- Published by Penza State University in Models, systems, networks in economics, technology, nature and society
- No. 3
THE ROLE OF EXCHANGE TRADING IN ENSURING TRANSPARENCY OF INDUSTRY PRICING MECHANISMS
Background. Commodity exchanges play an important role in the development of the country's economy. They provide an opportunity to determine the market capacity and competition conditions, exchange information and contribute to optimal pricing. Prices set on the exchange serve as a benchmark for other markets. The article reveals the role of exchange trading in crushed stone as prospects for the development of the construction materials market. The purpose of the study is to investigate the need to organize exchange trades of building materials in order to form a transparent pricing system and increase tax collection in the budget. Materials and methods. The analysis of pricing for a number of building materials positions was conducted and the need for developing exchange trades as a source of information for regulation by the state, in particular tax authorities, was identified. General scientific research methods were used in the study: induction, analysis and generalization of data. Results. A classification of a potential exchange commodity – crushed stone – has been carried out, which will help buyers choose the right grade depending on its purpose. The adopted classification, reflecting the properties and purpose of crushed stone, will not only promote the transparency of transactions, but will also prevent tax evasion. Conclusions. The development of exchange trading as a single center for pricing in the construction materials market will create many conveniences for market participants and for the state.
- 1 January 2025
- Published by Penza State University in Models, systems, networks in economics, technology, nature and society
- No. 3
THE ROLE OF EXCHANGE TRADING IN ENSURING TRANSPARENCY OF INDUSTRY PRICING MECHANISMS
Background. Commodity exchanges play an important role in the development of the country's economy. They provide an opportunity to determine the market capacity and competition conditions, exchange information and contribute to optimal pricing. Prices set on the exchange serve as a benchmark for other markets. The article reveals the role of exchange trading in crushed stone as prospects for the development of the construction materials market. The purpose of the study is to investigate the need to organize exchange trades of building materials in order to form a transparent pricing system and increase tax collection in the budget. Materials and methods. The analysis of pricing for a number of building materials positions was conducted and the need for developing exchange trades as a source of information for regulation by the state, in particular tax authorities, was identified. General scientific research methods were used in the study: induction, analysis and generalization of data. Results. A classification of a potential exchange commodity – crushed stone – has been carried out, which will help buyers choose the right grade depending on its purpose. The adopted classification, reflecting the properties and purpose of crushed stone, will not only promote the transparency of transactions, but will also prevent tax evasion. Conclusions. The development of exchange trading as a single center for pricing in the construction materials market will create many conveniences for market participants and for the state.
- 1 January 2024
- Published by Penza State University in University proceedings. Volga region. Technical sciences
- No. 2
Fiber-optic system for measuring temperature of rigid deformable media
Background. Currently, during the construction of new nuclear power plants (NPP), its service life has been extended to 60 years, which requires the modernization of information and measurement systems that control many parameters of the dome of the NPP, including temperature parameters. The safety of the NPP as a whole depends on the accuracy of measuring the temperature of the cement base of the dome of the NPP. The measuring instruments used should not create additional electromagnetic interference during measurements, therefore, the use of fiber-optic measuring instruments is considered more preferable. The object of the study is a fiber-optic information and measurement system (FOIMS) of the stress-strain state of the protective shell of the NPP. The subject of the research is scientific and technical solutions of fiber-optic temperature sensors (FOTS) with a compensation channel, which are part of the nuclear power plant protective shell, installed in rigid deformable environments. The purpose of the study is to develop constructive, technological and structural solutions of the FOTS, providing the possibility of its application in rigid deformable environments with minimal dynamic error due to inertial processes in the sensor housing. Materials and methods. The main approach to achieve this goal is to adapt the previously developed technical solutions of the FOTS to the measurement conditions in rigid deformable media, which are the supporting parts of the dome of the NPP. Results. The structure is determined and the design of the FOTS with a compensation channel of the reflective type is developed. The relations between the coefficients of thermal expansion of the materials from which the structural elements of the FOTS are made, providing a reduction in the deformation of the protective housing and the sensitive element of the FOTS when the temperature changes, are determined. The initial distance between the mirror surface and the ends of the optical fibers located opposite the mirror surface, at which the sensor conversion function is linear, and the maximum sensitivity (up to 30%) and the modulation depth of the optical signal conversion (up to 50%) are determined. Conclusions. The design, technological and structural solutions of the FOTS with a reflective type compensation channel for the FOIMS of the protective shell of NPP placed in rigid deformable environments have been developed. The use of the developed fiber-optic temperature sensor will provide: reduction of internal stresses inside the deformable environment of the protective shell when its temperature changes; reduction of the dynamic error of temperature measurement; increase in the accuracy of measuring the temperature of the protective shell.
- 1 January 2024
- Published by Penza State University in University proceedings. Volga region. Technical sciences
- No. 2
Fiber-optic system for measuring temperature of rigid deformable media
Background. Currently, during the construction of new nuclear power plants (NPP), its service life has been extended to 60 years, which requires the modernization of information and measurement systems that control many parameters of the dome of the NPP, including temperature parameters. The safety of the NPP as a whole depends on the accuracy of measuring the temperature of the cement base of the dome of the NPP. The measuring instruments used should not create additional electromagnetic interference during measurements, therefore, the use of fiber-optic measuring instruments is considered more preferable. The object of the study is a fiber-optic information and measurement system (FOIMS) of the stress-strain state of the protective shell of the NPP. The subject of the research is scientific and technical solutions of fiber-optic temperature sensors (FOTS) with a compensation channel, which are part of the nuclear power plant protective shell, installed in rigid deformable environments. The purpose of the study is to develop constructive, technological and structural solutions of the FOTS, providing the possibility of its application in rigid deformable environments with minimal dynamic error due to inertial processes in the sensor housing. Materials and methods. The main approach to achieve this goal is to adapt the previously developed technical solutions of the FOTS to the measurement conditions in rigid deformable media, which are the supporting parts of the dome of the NPP. Results. The structure is determined and the design of the FOTS with a compensation channel of the reflective type is developed. The relations between the coefficients of thermal expansion of the materials from which the structural elements of the FOTS are made, providing a reduction in the deformation of the protective housing and the sensitive element of the FOTS when the temperature changes, are determined. The initial distance between the mirror surface and the ends of the optical fibers located opposite the mirror surface, at which the sensor conversion function is linear, and the maximum sensitivity (up to 30%) and the modulation depth of the optical signal conversion (up to 50%) are determined. Conclusions. The design, technological and structural solutions of the FOTS with a reflective type compensation channel for the FOIMS of the protective shell of NPP placed in rigid deformable environments have been developed. The use of the developed fiber-optic temperature sensor will provide: reduction of internal stresses inside the deformable environment of the protective shell when its temperature changes; reduction of the dynamic error of temperature measurement; increase in the accuracy of measuring the temperature of the protective shell.
- 1 January 2023
- Published by Penza State University in University proceedings. Volga region. Technical sciences
- No. 4
Fiber-optic system for measuring large inclination angles of large-sized test benches for rocket, space and aviation technology
Article 9423. Пензенский государственный университет
- 1 January 2023
- Published by Penza State University in University proceedings. Volga region. Technical sciences
- No. 4
Fiber-optic system for measuring large inclination angles of large-sized test benches for rocket, space and aviation technology
Article 9423. Пензенский государственный университет
- Open Access
Measuring Setup for Experimental Research of Two-Coordinate Fiber-Optic Acceleration Sensors with Cylindrical Lenses
The article presents the possibilities of using fiber-optic acceleration (FOC) sensors on products of rocket-space and aviation technology as part of information-measuring systems. A special measuring device has been developed for experimental confirmation of the main characteristics of the technical characteristics of the developed, two-coordinate fiber-optic acceleration sensors. The developed measuring setup for the experimental research of a two-coordinate fiber-optic acceleration sensor with two, cylindrical lenses fixed on two H-shaped elastic elements deflected under the influence of acceleration in two mutually perpendicular directions X and Y, intended for operation in harsh conditions of rocket and space technology. The experimental equipment consists of the developed setup for setting micromovements and an information conversion unit, including modules for signal conversion, transmission, power supply, signal amplification, and indication. Experimental dependences of the output voltage from the information conversion unit’s output on the micro-displacement in the range corresponding to the micro-displacements of the inertial mass with a cylindrical lens under acceleration in the range of ±100 m/s2 were obtained on the micro-displacement setting unit. The maximum value of the linearity error of the prototype acceleration sensor together with the information conversion unit was 0.07%. The conversion sensitivity of a two-coordinate fiber-optic acceleration sensor per the experimental dependences obtained on the Data Physics LE-612 MST/DSA 10–40 k vibration stand when exposed to sinusoidal vibration with an acceleration amplitude from 2 to 10 g in the frequency range from 5 to 2560 Hz was, on average, 3 mV/m/s2. The conducted experimental research confirms the performance of experimental samples of fiber-optic acceleration sensors together with an information conversion unit, as well as the achievement of high metrological characteristics.
Open AccessMeasuring Setup for Experimental Research of Two-Coordinate Fiber-Optic Acceleration Sensors with Cylindrical Lenses
The article presents the possibilities of using fiber-optic acceleration (FOC) sensors on products of rocket-space and aviation technology as part of information-measuring systems. A special measuring device has been developed for experimental confirmation of the main characteristics of the technical characteristics of the developed, two-coordinate fiber-optic acceleration sensors. The developed measuring setup for the experimental research of a two-coordinate fiber-optic acceleration sensor with two, cylindrical lenses fixed on two H-shaped elastic elements deflected under the influence of acceleration in two mutually perpendicular directions X and Y, intended for operation in harsh conditions of rocket and space technology. The experimental equipment consists of the developed setup for setting micromovements and an information conversion unit, including modules for signal conversion, transmission, power supply, signal amplification, and indication. Experimental dependences of the output voltage from the information conversion unit’s output on the micro-displacement in the range corresponding to the micro-displacements of the inertial mass with a cylindrical lens under acceleration in the range of ±100 m/s2 were obtained on the micro-displacement setting unit. The maximum value of the linearity error of the prototype acceleration sensor together with the information conversion unit was 0.07%. The conversion sensitivity of a two-coordinate fiber-optic acceleration sensor per the experimental dependences obtained on the Data Physics LE-612 MST/DSA 10–40 k vibration stand when exposed to sinusoidal vibration with an acceleration amplitude from 2 to 10 g in the frequency range from 5 to 2560 Hz was, on average, 3 mV/m/s2. The conducted experimental research confirms the performance of experimental samples of fiber-optic acceleration sensors together with an information conversion unit, as well as the achievement of high metrological characteristics.
- 1 January 2022
- Published by Penza State University in Models, systems, networks in economics, technology, nature and society
- No. 4
INTEGRATED REPORTING AS A MODERN TYPE OF REPORTING FOR BUSINESS
Article 2422. Пензенский государственный университет
- 1 January 2022
- Published by Penza State University in Models, systems, networks in economics, technology, nature and society
- No. 4
INTEGRATED REPORTING AS A MODERN TYPE OF REPORTING FOR BUSINESS
Article 2422. Пензенский государственный университет
- 1 January 2022
- Published by Penza State University in University proceedings. Volga region. Technical sciences
- No. 1
Optoelectronic information-measuring systems for determining the absolute position of an object
Article 8122. Пензенский государственный университет
- 1 January 2022
- Published by Penza State University in University proceedings. Volga region. Technical sciences
- No. 1
Optoelectronic information-measuring systems for determining the absolute position of an object
Article 8122. Пензенский государственный университет
- 1 January 2021
- Published by Penza State University in Models, systems, networks in economics, technology, nature and society
- No. 2
MACRO- AND MICROECONOMIC CONSEQUENCES OF OVERCOMING THE COVID-19 PANDEMIC FOR THE RUSSIAN ECONOMY
Article 1221. Пензенский государственный университет
- 1 January 2021
- Published by Penza State University in Models, systems, networks in economics, technology, nature and society
- No. 2
MACRO- AND MICROECONOMIC CONSEQUENCES OF OVERCOMING THE COVID-19 PANDEMIC FOR THE RUSSIAN ECONOMY
Article 1221. Пензенский государственный университет
- 1 January 2021
- Published by Penza State University in University proceedings. Volga region. Technical sciences
- No. 2
The implementation of the two-channel principle in fiber-optic information-measuring systems
Article 8221. Пензенский государственный университет
- 1 January 2021
- Published by Penza State University in University proceedings. Volga region. Technical sciences
- No. 2
The implementation of the two-channel principle in fiber-optic information-measuring systems
Article 8221. Пензенский государственный университет