MMMourad Moderres

Mourad Moderres

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mourad Moderres has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Lattice Boltzmann Method Analysis of Natural Convection in a Closed Environment With a Square Heater Inserted in a Porous Cylinder

    by Seddik Kherroubi, Mourad Moderres, Abdelkader Boutra, Abderrahmane Bourada, Chaouki Ghenai, Hakan F. Oztop, Djeloul Azzouzi, Youb Khaled Benkahla, Nidal Abu‐Hamdeh

    In this work, a numerical study of the natural convection within a two‐dimensional square cavity is presented. The cavity is equipped with a hot square block at its center with a side length of , and it is enveloped by a porous layer of cylindrical shape with a radius . The vertical walls are adiabatic, while the horizontal walls are maintained at a cold temperature. To describe the momentum equations in the porous matrix, the Brinkman‐extended Darcy equation is applied, and the Boussinesq approximation is employed for the buoyancy term. The Lattice Boltzmann Method is utilized and validated by comparison with results from the literature. The novelty of this study lies in analyzing the combined effects of the porous layer geometry and thermal conductivity ratio on heat transfer performance, which has not been previously addressed in detail. The results obtained made it possible to study the structure of flow and heat transfers, as a function of the various parameters such as the Darcy number (Da), the Rayleigh number (Ra), the porosity of the porous medium as well as the thermal conductivity ratio and the porous layer radius . Our results show that increasing the Rayleigh number markedly strengthens the convective flow, whereas higher Darcy numbers enhance the interaction between the fluid and the porous medium. In contrast, enlarging the porous layer radius leads to a reduction in the overall heat transfer rate. Notably, the most significant enhancement in the Nusselt number occurs at intermediate porosity values combined with a moderate thermal conductivity ratio. These outcomes offer valuable insights for optimizing cavity porous configurations in order to achieve more efficient natural convection heat transfer.

  • Real-Time Thermodynamic Analysis of Gas Turbines in Combined Cycle Power Plants

    by Djelloul Azzouzi, Mourad Moderres, Said Zafar

    Improving the energy efficiency of thermal power plants through the thermodynamic analysis of their operational parameters in real time is a major issue in order to ensure rational and sustainable operation. An in-depth analysis has been conducted on the thermodynamic efficiency of three gas turbines in a gas/steam combined cycle power plant using real-time operational data. The presented work is part of the research that deals with operational parameters in order to maintain the performance of thermal power plants at the highest possible value. A combination of the first and second laws of thermodynamics has been developed to provide a model able of predicting the thermal efficiency of gas turbines in different operating modes in real-time. The results of our study indicate that each turbine demonstrated a thermal efficiency of around 33.5%. Additionally, the turbines produced an output power of 284 MW and had a specific fuel consumption rate of roughly 206 kg/MWh. The analysis not only verifies the durability of the turbines under various operating conditions, but also presents a verified method to monitor and improve energy efficiency in real time, which is crucial to optimize the power plant operations. Furthermore, this thermodynamic model can be used as a calculation program to be integrated into the display panel which will be used to provide operating indicators in real time. Keywords: Steam/Gas combined cycle, Gas turbine, Thermal performance, Energy conversion.

  • Effects of Cr Doping on the Physical Properties of Ga1−xCrxAs Alloys: An Ab Initio Study

    by Zine Elabidine Biskri, Mourad Moderres, Habib Rached, Messaoud Caid, Djamel Rached, Youcef Rached, Nada Talal Mahmoud, Samah Al‐Qaisi

    This study employs first‐principles calculations to investigate the effects of varying Cr concentrations on the structural stability and electronic, magnetic, and optical properties of ternary Ga1−xCrxAs alloys. The pseudopotential‐plane‐wave density functional theory calculations confirm the energetic stability of both pure GaAs and Ga1−xCrxAs alloys, with stability decreasing as the Cr concentration increases. The alloy with 3.12% Cr exhibits the highest stability. Spin‐polarized band structures and density of states analyses reveal half‐metallic behavior at Cr concentrations of 3.12, 6.25, and 12.5%, transitioning to metallic behavior at 25%. The spin‐down bandgap decreases due to contributions from the Cr‐3d state, accompanied by a noticeable bowing effect. The total magnetic moment remains constant at 3.00 μB across all concentrations. Optically, the half‐metallic alloys exhibit the lowest static refractive index n(0), while the metallic Ga0.75Cr0.25As alloy shows the highest. Absorption and reflectivity analyses indicate that alloys with 3.12 and 6.25% Cr exhibit high absorption and moderate reflectivity in the visible and UV regions, outperforming pure GaAs. These findings underscore the potential of low‐Cr‐concentration Ga1−xCrxAs alloys for applications in solar cells and optoelectronic devices.


  • Open Access

    Double-diffusive natural convection in a cavity with an inner cylinder wrapped by a porous layer

    by Mourad Moderres, Toufik Benmalek, Aberkan Sofiane, Abderrahmene Ghezal, Said Abboudi, Abderrahmene Benbrik

    This paper reports a numerical study of double-diffusive natural convection through an annular space delimited by a square cylinder on the outside and a cylindrical cylinder on the inside covered by a porous layer. The Darcy-Brinkmann-Forchheimer is used for modeling flow in both fluid and porous areas. The annular space is partially or completely filled with an isotropic porous medium. A finite volume method, using the Patankar-Spalding technique is used for solving the discretization of the dimensionless equations governing the problem. The effects of simultaneously applied thermal and solutal buoyancy forces on heat and mass transfer are shown in the results for a large range of buoyancy ratios, Rayleigh number, and thermal conductivity. Streamlines, isotherms, and iso-concentrations are presented to analyze the flow structure transition from mass species dominated to thermal dominated flow. Results show that the buoyancy ratio can change the flow pattern and the increased thermal conductivity ratio can improve heat and mass transfer. A good agreement was obtained between the present results and those published were found.


  • Mixed Convection of Bingham Fluid in a Two Sided Lid-Driven Cavity Heated From Below

    by Toufik Benmalek, Ferhat Souidi, Mourad Moderres, Bilal Yassad, Said Abboudi


  • Numerical investigation of double-diffusive mixed convection in horizontal annulus partially filled with a porous medium

    by Mourad Moderres, Said Abboudi, Malika Ihdene, Sofiane Aberkane, Abderahmane Ghezal

    Purpose: Double-diffusive convection within a tri-dimensional in a horizontal annulus partially filled with a fluid-saturated porous medium is numerically investigated. The aim of this work is to understand the effects of a source of heat and solute on the fluid flow and heat and mass transfer rates. Design/methodology/approach: In the formulation of the problem, the Darcy–Brinkman–Forchheimer model is adopted to the fluid flow in the porous annulus. The laminar flow regime is considered under steady state conditions. Moreover, the transport equation for continuity, momentum, energy and mass transfer are solved using the Patankar–Spalding technique. Findings: Through this investigation, the predicted results for both average Nusselt and Sherwood numbers were correlated in terms of Lewis number, thermal Grashof number and buoyancy ration. A comparison was made with the published results and a good agreement was found. Originality/value: The paper’s results are validated by favorable comparisons with previously published results. The results of the problem are presented in graphical forms and discussed. This paper aims to study the behavior of the flow structure and heat transfer and mass for different parameters.