Mladen Cosic
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Mladen Cosic has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Radomir Folić
Faculty of Technical Sciences, Novi Sad
2 shared publications - Stanko Brcic
Univ Belgrade, Fac Civil Engn, Belgrade, Serbia
2 shared publications
Latest Publications
- Open Access
- 1 January 2017
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Građevinski materijali i konstrukcije
- Vol. 60 (1) , 3-30
An overview of modern seismic analyses with different ways of damping introduction
The authors of the paper, on the basis of the analysis of a large number of scientific papers, presented their original systematization of seismic analyses of structures, where a large number of them were developed during the last twenty years. Seismic analyses are generally classified into two (four) groups: Linear Static Analyses (LSA) and Nonlinear Static Analyses (NSA), and Linear Dynamic Analyses (LDA) and Nonlinear Dynamic Analyses (NDA). The analyses of nonlinear seismic structural response were classified separately from the Target Displacement Analyses (TDA) which defines the relationship of the seismic demand and seismic response. On the other hand, classification was also conducted depending on whether a nonlinear response of the system is obtained by the implementation of incremental-iterative procedures or by implementation of semi-iterative and/or semi-incremental procedures. NDA were classified according to the concept of mathematical formulation, i.e. whether they are based on only one dynamic analysis, several dynamic analyses or they are solved in combination with other methods. By implementing the conducted systematization of seismic analyses, one can efficiently consider which type of analysis is optimal for structural analysis and which type of analysis should be taken into account in the phase of preliminary and final analyses in the course of scientific research and professional projects. This paper also presents the aspects of damping modelling in structural analysis through the systematization of damping types and flowcharts, depending on the type of analysis applied: linear and nonlinear, static and dynamic. Damping has been systematized based on the way it was introduced into calculations, i.e. over material damping, link element damping and damping directly introduced into the analyses which are conducted in capacitive, time and frequency domains. In the process of creating numerical structural models, the type of damping and the way of its introduction into structural analysis can be very efficiently selected by applying the flow charts developed. By applying the developed flowcharts, alternative approaches to the introduction of damping into structural analysis can also be defined.
- 1 January 2017
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Građevinski materijali i konstrukcije
- Vol. 60 (1) , 3-30
Open AccessAn overview of modern seismic analyses with different ways of damping introduction
The authors of the paper, on the basis of the analysis of a large number of scientific papers, presented their original systematization of seismic analyses of structures, where a large number of them were developed during the last twenty years. Seismic analyses are generally classified into two (four) groups: Linear Static Analyses (LSA) and Nonlinear Static Analyses (NSA), and Linear Dynamic Analyses (LDA) and Nonlinear Dynamic Analyses (NDA). The analyses of nonlinear seismic structural response were classified separately from the Target Displacement Analyses (TDA) which defines the relationship of the seismic demand and seismic response. On the other hand, classification was also conducted depending on whether a nonlinear response of the system is obtained by the implementation of incremental-iterative procedures or by implementation of semi-iterative and/or semi-incremental procedures. NDA were classified according to the concept of mathematical formulation, i.e. whether they are based on only one dynamic analysis, several dynamic analyses or they are solved in combination with other methods. By implementing the conducted systematization of seismic analyses, one can efficiently consider which type of analysis is optimal for structural analysis and which type of analysis should be taken into account in the phase of preliminary and final analyses in the course of scientific research and professional projects. This paper also presents the aspects of damping modelling in structural analysis through the systematization of damping types and flowcharts, depending on the type of analysis applied: linear and nonlinear, static and dynamic. Damping has been systematized based on the way it was introduced into calculations, i.e. over material damping, link element damping and damping directly introduced into the analyses which are conducted in capacitive, time and frequency domains. In the process of creating numerical structural models, the type of damping and the way of its introduction into structural analysis can be very efficiently selected by applying the flow charts developed. By applying the developed flowcharts, alternative approaches to the introduction of damping into structural analysis can also be defined.
- 1 January 2015
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Građevinski materijali i konstrukcije
- Vol. 58 (3) , 3-27
Performance analysis of damaged buildings applying scenario of related non-linear analyses and damage coefficient
The paper deals with methodology developed and presented for analyzing the damage on structures exposed to accidental and seismic actions. The procedure is based on non-linear numerical analysis, taking into account the principles of Performance-Based Seismic Design (PBSD). The stiffness matrix of the effects of vertical action is used as the initial stiffness matrix in non-linear analysis which simulates the collapse of individual ground-floor columns, forming thereby a number of possible scenarios. By the end of the analysis that simulates the collapse of individual columns, the stiffness matrix is used as the initial stiffness matrix for Non-linear Static Pushover Analysis (NSPA) of bi-directional seismic action (X and Y directions). Target displacement analyses were conducted using the Capacity Spectrum Method (CSM). The structure's conditions/state was assessed based on the calculated global and inter-storey drifts and the damage coefficient developed. The damage level to the building was established using an integrated approach based on global and inter-storey drifts, so that, depending on the level of displacements for which the drifts are identified, a more reliable answer can be obtained. Applying the damage coefficient, a prompt, reliable and accurate indication can be obtained on the damage level to the entire structure in the capacitive domain, from elastic and non-linear to collapse state.
- 1 January 2015
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Građevinski materijali i konstrukcije
- Vol. 58 (3) , 3-27
Performance analysis of damaged buildings applying scenario of related non-linear analyses and damage coefficient
The paper deals with methodology developed and presented for analyzing the damage on structures exposed to accidental and seismic actions. The procedure is based on non-linear numerical analysis, taking into account the principles of Performance-Based Seismic Design (PBSD). The stiffness matrix of the effects of vertical action is used as the initial stiffness matrix in non-linear analysis which simulates the collapse of individual ground-floor columns, forming thereby a number of possible scenarios. By the end of the analysis that simulates the collapse of individual columns, the stiffness matrix is used as the initial stiffness matrix for Non-linear Static Pushover Analysis (NSPA) of bi-directional seismic action (X and Y directions). Target displacement analyses were conducted using the Capacity Spectrum Method (CSM). The structure's conditions/state was assessed based on the calculated global and inter-storey drifts and the damage coefficient developed. The damage level to the building was established using an integrated approach based on global and inter-storey drifts, so that, depending on the level of displacements for which the drifts are identified, a more reliable answer can be obtained. Applying the damage coefficient, a prompt, reliable and accurate indication can be obtained on the damage level to the entire structure in the capacitive domain, from elastic and non-linear to collapse state.
- 1 January 2013
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Građevinski materijali i konstrukcije
- Vol. 56 (4) , 19-38
Typology of NSPA pushover curves and surfaces for 3D performance-based seismic response of structures
This paper presents a typology of pushover curves and the originally developed pushover surfaces based on the generalization of the nonlinear response of the 3D system to the earthquake action. By determination and analysis of the NSPA (Nonlinear Static Pushover Analysis) pushover surface, it is possible to obtain a more complex and complete insight of the response and performance of 3D models of structures exposed to the bidirectional seismic action. The setting which was a base for the development of mathematical formulation and generation of the NSPA pushover surface presents the application of NSPA pushover curve for the response of the system in one direction. By integrating the system responses for a number of directions, i.e. attack angles of directions of earthquake action, the presentation of 3D response of the system in the capacity domain is achieved. The typology of NSPA pushover curves is derived as a function of the existence of linear, nonlinear and collapse sub domain, and also considerations are made taking into account the nonlinear stiffness and ductility class of the system. The typology of NSPA pushover surface is derived based on the generalized model of the system response through ductility, ductility in hardening/softening zone and a coefficient of the relationship of stiffness in the nonlinear and linear domain, based on which it is possible to create systems of different stiffness, strength and ductility. The research presented in this paper defines the typological models of NSPA pushover surfaces which can be the base of further discussion on real pushover surfaces of 3D models of structures with a more complex, particularly non-symmetric geometry, as well as the variation of responses of the system due to bidirectional seismic actions.
- 1 January 2013
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Građevinski materijali i konstrukcije
- Vol. 56 (4) , 19-38
Typology of NSPA pushover curves and surfaces for 3D performance-based seismic response of structures
This paper presents a typology of pushover curves and the originally developed pushover surfaces based on the generalization of the nonlinear response of the 3D system to the earthquake action. By determination and analysis of the NSPA (Nonlinear Static Pushover Analysis) pushover surface, it is possible to obtain a more complex and complete insight of the response and performance of 3D models of structures exposed to the bidirectional seismic action. The setting which was a base for the development of mathematical formulation and generation of the NSPA pushover surface presents the application of NSPA pushover curve for the response of the system in one direction. By integrating the system responses for a number of directions, i.e. attack angles of directions of earthquake action, the presentation of 3D response of the system in the capacity domain is achieved. The typology of NSPA pushover curves is derived as a function of the existence of linear, nonlinear and collapse sub domain, and also considerations are made taking into account the nonlinear stiffness and ductility class of the system. The typology of NSPA pushover surface is derived based on the generalized model of the system response through ductility, ductility in hardening/softening zone and a coefficient of the relationship of stiffness in the nonlinear and linear domain, based on which it is possible to create systems of different stiffness, strength and ductility. The research presented in this paper defines the typological models of NSPA pushover surfaces which can be the base of further discussion on real pushover surfaces of 3D models of structures with a more complex, particularly non-symmetric geometry, as well as the variation of responses of the system due to bidirectional seismic actions.