Christopher R. Laughman
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Christopher R. Laughman has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Hongtao Qiao
Mitsubishi Electric Research Laboratories Cambridge MA USA
5 shared publications - Scott A. Bortoff
Mitsubishi Electric Research Laboratories Cambridge MA USA
3 shared publications - Ankush Chakrabarty
Mitsubishi Electric Research Laboratories
2 shared publications - Vedang Deshpande
Mitsubishi Electric Research Laboratories Cambridge MA USA
2 shared publications - Alberto Bemporad
IMT School for Advanced Studies Lucca
1 shared publication - Ankush Chakrabarty
Mitsubishi Electric Research Laboratories, Cambridge, USA
1 shared publication
Latest Publications
- Open Access
- 24 October 2025
- Published by Linkoping University Electronic Press in Swedish Aerospace Conference, FT2025
- Vol. 218, 345-352
A Dynamic Analysis of Refrigerant Mass in Vapor Compression Cycles
Numerical simulation of a thermofluid vapor compressioncycle (VCC) model in Modelica, for example,can exhibit a variation in the total fluid (refrigerant)mass. This paper provides a dynamicanalysis of a commonly used VCC model, identifies andanalyzes the root causeof this variation, and proposes a number of remedies. Thecause lies within the dynamicequations that result from application of the principle ofmass conservation.In many common formulations, these equations express theconservation of mass asone or more differential equations that equate the timederivative of mass to zero.The resulting set of n ordinary differential equations (anda number of auxiliaryalgebraic equations) include the time derivative of a massconstraint function,but not the actual mass constraint function itself. As aresult, this modelingformulation has the following properties: (1) equilibriumsolutions of the systemare neither isolated, nor exponentially stable; (2) alinearization about any equilibriumsolution has at least one eigenvalue equal to zero, makingan equilibrium solutionstable, but not exponentially stable; (3) for a VCC modelformulated using two fluidstates per control volume, a one-dimensional equilibriummanifold exists containingall of the equilibrium solutions, and is parameterized bythe total fluid mass;(4) an (n-1) dimensional, stable, invariant manifold existstransverse to theequilibrium manifold, defined by the mass constraintfunction, and on which analyticsolutions to the model evolve and the total fluid massremains constant; and(5) numerical solutions may drift off of this manifold,resulting in an observeddrift of fluid mass. These properties have consequences forsimulation,control design, numerical model reduction, and stateestimation.A number of methods to stabilize the mass constraint areproposed and anumber of examples that illustrate the behavior, analysisand remedies are provided.
- 24 October 2025
- Published by Linkoping University Electronic Press in Swedish Aerospace Conference, FT2025
- Vol. 218, 345-352
Open AccessA Dynamic Analysis of Refrigerant Mass in Vapor Compression Cycles
Numerical simulation of a thermofluid vapor compressioncycle (VCC) model in Modelica, for example,can exhibit a variation in the total fluid (refrigerant)mass. This paper provides a dynamicanalysis of a commonly used VCC model, identifies andanalyzes the root causeof this variation, and proposes a number of remedies. Thecause lies within the dynamicequations that result from application of the principle ofmass conservation.In many common formulations, these equations express theconservation of mass asone or more differential equations that equate the timederivative of mass to zero.The resulting set of n ordinary differential equations (anda number of auxiliaryalgebraic equations) include the time derivative of a massconstraint function,but not the actual mass constraint function itself. As aresult, this modelingformulation has the following properties: (1) equilibriumsolutions of the systemare neither isolated, nor exponentially stable; (2) alinearization about any equilibriumsolution has at least one eigenvalue equal to zero, makingan equilibrium solutionstable, but not exponentially stable; (3) for a VCC modelformulated using two fluidstates per control volume, a one-dimensional equilibriummanifold exists containingall of the equilibrium solutions, and is parameterized bythe total fluid mass;(4) an (n-1) dimensional, stable, invariant manifold existstransverse to theequilibrium manifold, defined by the mass constraintfunction, and on which analyticsolutions to the model evolve and the total fluid massremains constant; and(5) numerical solutions may drift off of this manifold,resulting in an observeddrift of fluid mass. These properties have consequences forsimulation,control design, numerical model reduction, and stateestimation.A number of methods to stabilize the mass constraint areproposed and anumber of examples that illustrate the behavior, analysisand remedies are provided.
- Open Access
- 24 October 2025
- Published by Linkoping University Electronic Press in Swedish Aerospace Conference, FT2025
- Vol. 218, 469-477
Zero-Shot Parameter Estimation of Modelica Models using Patch Transformer Networks
This paper introduces a transformer-based generativenetwork for rapid parameter estimation of Modelica buildingmodels using simulation data from a Functional Mock-up Unit(FMU). Utilizing the \texttt{MixedAirCO2} model from theModelica Buildings library, we simulate a single-zonemixed-air volume with detailed thermal and \cotwo dynamics.By varying eight physical parameters and randomizingoccupancy profiles across 100 simulated systems, wegenerate a comprehensive dataset. The transformer encoder,informed by room temperature and \cotwo concentrationoutputs, predicts the underlying physical parameters withhigh accuracy and without re-tuning (hence, ``zero-shot'').This approach eliminates the need for iterativeoptimization or can be used to warm-start suchoptimization-based approaches, enabling real-time control,monitoring, and fault detection in FMU-based workflows.
- 24 October 2025
- Published by Linkoping University Electronic Press in Swedish Aerospace Conference, FT2025
- Vol. 218, 469-477
Open AccessZero-Shot Parameter Estimation of Modelica Models using Patch Transformer Networks
This paper introduces a transformer-based generativenetwork for rapid parameter estimation of Modelica buildingmodels using simulation data from a Functional Mock-up Unit(FMU). Utilizing the \texttt{MixedAirCO2} model from theModelica Buildings library, we simulate a single-zonemixed-air volume with detailed thermal and \cotwo dynamics.By varying eight physical parameters and randomizingoccupancy profiles across 100 simulated systems, wegenerate a comprehensive dataset. The transformer encoder,informed by room temperature and \cotwo concentrationoutputs, predicts the underlying physical parameters withhigh accuracy and without re-tuning (hence, ``zero-shot'').This approach eliminates the need for iterativeoptimization or can be used to warm-start suchoptimization-based approaches, enabling real-time control,monitoring, and fault detection in FMU-based workflows.
- Open Access
- 16 January 2025
- Published by Linkoping University Electronic Press in Swedish Aerospace Conference, FT2025
- Vol. 207, 21-28
Fluid Property Functions in Polar and Parabolic Coordinates
This paper presents two methods for reallizing fluid property functions in Modelica simulation models. Each makes use of a coordinate transformation that aligns one coordinate with the saturation curve. This provides for a precise representation of the fluid property function at the saturation curve, and for connected domains of interest including the liquid, vapor, supercritical and two-phase regions. Both approaches make use of spline function approximation in the aligned coordinates, and are numerically efficient, well conditioned, and allow for efficient calculation of derivatives up to any desired order that are precise up to processor numerical tolerance.
- 16 January 2025
- Published by Linkoping University Electronic Press in Swedish Aerospace Conference, FT2025
- Vol. 207, 21-28
Open AccessFluid Property Functions in Polar and Parabolic Coordinates
This paper presents two methods for reallizing fluid property functions in Modelica simulation models. Each makes use of a coordinate transformation that aligns one coordinate with the saturation curve. This provides for a precise representation of the fluid property function at the saturation curve, and for connected domains of interest including the liquid, vapor, supercritical and two-phase regions. Both approaches make use of spline function approximation in the aligned coordinates, and are numerically efficient, well conditioned, and allow for efficient calculation of derivatives up to any desired order that are precise up to processor numerical tolerance.
- Open Access
- 16 January 2025
- Published by Linkoping University Electronic Press in Swedish Aerospace Conference, FT2025
- Vol. 207, 178-188
Integrating Generative Machine Learning Models and Physics-Based Models for Building Energy Simulation
This paper describes the integration of generative deep learning models for data-driven building energy simulation. The generative models (GMs) are trained to learn distributions of building input signals from data using Python and PyTorch and interfaced with physics-based Modelica models. The developed integration requirements provide background on typical needs that focus on building energy simulation performance. Simulation examples using models from the Buildings library, refactored to receive GM inputs, are presented to illustrate the benefits of the proposed integration approach and how GMs can be used for building energy performance analysis.
- 16 January 2025
- Published by Linkoping University Electronic Press in Swedish Aerospace Conference, FT2025
- Vol. 207, 178-188
Open AccessIntegrating Generative Machine Learning Models and Physics-Based Models for Building Energy Simulation
This paper describes the integration of generative deep learning models for data-driven building energy simulation. The generative models (GMs) are trained to learn distributions of building input signals from data using Python and PyTorch and interfaced with physics-based Modelica models. The developed integration requirements provide background on typical needs that focus on building energy simulation performance. Simulation examples using models from the Buildings library, refactored to receive GM inputs, are presented to illustrate the benefits of the proposed integration approach and how GMs can be used for building energy performance analysis.
- Open Access
- 22 December 2023
- Published by Linkoping University Electronic Press in Swedish Aerospace Conference, FT2025
- p. 327-336
On the Characteristics of One-Dimensional Compressible Flow
Eigen decomposition of the governing equations that describe one-dimensional compressible flow has been presented. Analytical solution of the characteristics of the flow was derived. Simulation studies were conducted to support the theoretical analyses and wave propagation results were discussed in detail. It was found that acoustic effect due to the dynamic momentum led to a significant slowdown in the simulation and could be neglected in models without significant loss in accuracy for applications where energy transfer is of greater interest.
- 22 December 2023
- Published by Linkoping University Electronic Press in Swedish Aerospace Conference, FT2025
- p. 327-336
Open AccessOn the Characteristics of One-Dimensional Compressible Flow
Eigen decomposition of the governing equations that describe one-dimensional compressible flow has been presented. Analytical solution of the characteristics of the flow was derived. Simulation studies were conducted to support the theoretical analyses and wave propagation results were discussed in detail. It was found that acoustic effect due to the dynamic momentum led to a significant slowdown in the simulation and could be neglected in models without significant loss in accuracy for applications where energy transfer is of greater interest.
- 6 December 2023
- Published by ASME International in Journal of Dynamic Systems, Measurement, and Control
- Vol. 146 (1) , 1-14
Self-Optimizing Vapor Compression Cycles Online With Bayesian Optimization Under Local Search Region Constraints
Self-optimizing efficiency of vapor compression cycles (VCCs) involves assigning multiple decision variables simultaneously in order to minimize power consumption while maintaining safe operating conditions. Due to the modeling complexity associated with cycle dynamics (and other smart building energy systems), online self-optimization requires algorithms that can safely and efficiently explore the search space in a derivative-free and model-agnostic manner. This makes Bayesian optimization (BO) a strong candidate for self-optimization. Unfortunately, classical BO algorithms ignore the relationship between consecutive optimizer candidates, resulting in jumps in the search space that can lead to fail-safe mechanisms being triggered, or undesired transient dynamics that violate operational constraints. To this end, we propose safe local search region (LSR)-BO, a global optimization methodology that builds on the BO framework while enforcing two types of safety constraints including black-box constraints on the output and LSR constraints on the input. We provide theoretical guarantees that under standard assumptions on the performance and constraint functions, LSR-BO guarantees constraints will be satisfied at all iterations with high probability. Furthermore, in the presence of only input LSR constraints, we show the method will converge to the true (unknown) globally optimal solution. We demonstrate the potential of our proposed LSR-BO method on a high-fidelity simulation model of a commercial vapor compression system with both LSR constraints on expansion valve positions and fan speeds, in addition to other safety constraints on discharge and evaporator temperatures.
- 6 December 2023
- Published by ASME International in Journal of Dynamic Systems, Measurement, and Control
- Vol. 146 (1) , 1-14
Self-Optimizing Vapor Compression Cycles Online With Bayesian Optimization Under Local Search Region Constraints
Self-optimizing efficiency of vapor compression cycles (VCCs) involves assigning multiple decision variables simultaneously in order to minimize power consumption while maintaining safe operating conditions. Due to the modeling complexity associated with cycle dynamics (and other smart building energy systems), online self-optimization requires algorithms that can safely and efficiently explore the search space in a derivative-free and model-agnostic manner. This makes Bayesian optimization (BO) a strong candidate for self-optimization. Unfortunately, classical BO algorithms ignore the relationship between consecutive optimizer candidates, resulting in jumps in the search space that can lead to fail-safe mechanisms being triggered, or undesired transient dynamics that violate operational constraints. To this end, we propose safe local search region (LSR)-BO, a global optimization methodology that builds on the BO framework while enforcing two types of safety constraints including black-box constraints on the output and LSR constraints on the input. We provide theoretical guarantees that under standard assumptions on the performance and constraint functions, LSR-BO guarantees constraints will be satisfied at all iterations with high probability. Furthermore, in the presence of only input LSR constraints, we show the method will converge to the true (unknown) globally optimal solution. We demonstrate the potential of our proposed LSR-BO method on a high-fidelity simulation model of a commercial vapor compression system with both LSR constraints on expansion valve positions and fan speeds, in addition to other safety constraints on discharge and evaporator temperatures.
- Open Access
Violation-Aware Contextual Bayesian Optimization for Controller Performance Optimization with Unmodeled Constraints
We study the problem of performance optimization of closed-loop control systems with unmodeled dynamics. Bayesian optimization (BO) has been demonstrated to be effective for improving closed-loop performance by automatically tuning controller gains or reference setpoints in a model-free manner. However, BO methods have rarely been tested on dynamical systems with unmodeled constraints and time-varying ambient conditions. In this paper, we propose a violation-aware contextual BO algorithm (VACBO) that optimizes closed-loop performance while simultaneously learning constraint-feasible solutions under time-varying ambient conditions. Unlike classical constrained BO methods which allow unlimited constraint violations, or 'safe' BO algorithms that are conservative and try to operate with near-zero violations, we allow budgeted constraint violations to improve constraint learning and accelerate optimization. We demonstrate the effectiveness of our proposed VACBO method for energy minimization of industrial vapor compression systems under time-varying ambient temperature and humidity.
Open AccessViolation-Aware Contextual Bayesian Optimization for Controller Performance Optimization with Unmodeled Constraints
We study the problem of performance optimization of closed-loop control systems with unmodeled dynamics. Bayesian optimization (BO) has been demonstrated to be effective for improving closed-loop performance by automatically tuning controller gains or reference setpoints in a model-free manner. However, BO methods have rarely been tested on dynamical systems with unmodeled constraints and time-varying ambient conditions. In this paper, we propose a violation-aware contextual BO algorithm (VACBO) that optimizes closed-loop performance while simultaneously learning constraint-feasible solutions under time-varying ambient conditions. Unlike classical constrained BO methods which allow unlimited constraint violations, or 'safe' BO algorithms that are conservative and try to operate with near-zero violations, we allow budgeted constraint violations to improve constraint learning and accelerate optimization. We demonstrate the effectiveness of our proposed VACBO method for energy minimization of industrial vapor compression systems under time-varying ambient temperature and humidity.
- Open Access
- 1 February 2019
- Published by Linkoping University Electronic Press
- No. 157
Thermodynamic Property and Fluid Modeling with Modern Programming Language Construct
Here is information on how to publish, spread your research, and search for your publications. Most of LiU's research publications are directly imported into DiVA from the Web of Science. Before registering a publication, always check if the publication is already in DiVA!
- 1 February 2019
- Published by Linkoping University Electronic Press
- No. 157
Open AccessThermodynamic Property and Fluid Modeling with Modern Programming Language Construct
Here is information on how to publish, spread your research, and search for your publications. Most of LiU's research publications are directly imported into DiVA from the Web of Science. Before registering a publication, always check if the publication is already in DiVA!
- Open Access
- 1 February 2019
- Published by Linkoping University Electronic Press
- No. 157
Coupled Simulation of a Room Air-conditioner with CFD Models for Indoor Environment
Here is information on how to publish, spread your research, and search for your publications. Most of LiU's research publications are directly imported into DiVA from the Web of Science. Before registering a publication, always check if the publication is already in DiVA!
- 1 February 2019
- Published by Linkoping University Electronic Press
- No. 157
Open AccessCoupled Simulation of a Room Air-conditioner with CFD Models for Indoor Environment
Here is information on how to publish, spread your research, and search for your publications. Most of LiU's research publications are directly imported into DiVA from the Web of Science. Before registering a publication, always check if the publication is already in DiVA!
- 4 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 28 (2) , 403-412
Proportional–Integral Extremum Seeking for Vapor Compression Systems
- 4 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 28 (2) , 403-412
Proportional–Integral Extremum Seeking for Vapor Compression Systems