Bin Wang
Research Subjects
Bin Wang has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Chong Zeng
TGS-NOPEC Geophysical Company, Houston, Texas, USA.
2 shared publications - Shuqian Dong
TGS, Houston Texas, USA.;;;
2 shared publications - Aimee Mao
Chevron, Houston, Texas, USA.
1 shared publication - Bertrand Duquet
Total E&P USA Inc., Houston, Texas, USA.
1 shared publication - Christopher Lee Slind
PETRONAS Carigali Sdn. Bhd., Kuala Lumpur, Malaysia.;;;
1 shared publication - Cosmin Macesanu
TGS, Houston Texas, USA.;;;
1 shared publication
Latest Publications
- 1 December 2021
- Published by Society of Exploration Geophysicists in The Leading Edge
- Vol. 40 (12) , 905-913
Enhancing subsalt imaging through advanced identification and suppression of interbed multiples and mode-converted reflections — Gulf of Mexico and Brazil case studies
In our case studies, the success of subsalt exploration and development wells depended heavily on the characterization of highly heterogeneous lacustrine microbial carbonates. Acoustic and elastic inversions have proved to be a good proxy for identification of reservoir quality variation for exploration and development well placements. However, qualitative and quantitative usage of subsalt seismic amplitudes requires proper illumination and good signal-to-noise ratio. If properly imaged, mode-converted reflections and interbed multiples can be complementary to the P-wave image. But, in conventional P-wave-oriented imaging, both types of events cannot be imaged correctly. They appear as coherent noise and negatively impact the overall exploration and development project outcomes, especially in areas with poor illumination. This paper consists of two parts: first, we investigate the potential problems resulting from converted waves and interbed multiples in data from two different basins — the Gulf of Mexico and the Campos Basin in offshore Brazil — and show our approach to attenuate them to reveal the true structures. The second part focuses on advanced identification of interbed multiples in modeling and migration methods. To facilitate the various strategies to attenuate interbed multiples, “interpretation” of the various events plays a significant role. Vertical seismic profile (VSP) data are excellent for the purpose; however, these data are only available at well locations, if they are recorded. As a result of many years of technology advancement, pseudo VSP data can be constructed effectively from standard streamer survey data. Two methods are highlighted in this paper for building pseudo VSP data in a full two-way sense, based on a typical Brazil-type salt model: Marchenko-based processing and full-wavefield migration. Major subsalt plays in the Gulf of Mexico and emerging plays in Brazil should benefit significantly from elimination of these kinds of coherent noise.
- 1 December 2021
- Published by Society of Exploration Geophysicists in The Leading Edge
- Vol. 40 (12) , 905-913
Enhancing subsalt imaging through advanced identification and suppression of interbed multiples and mode-converted reflections — Gulf of Mexico and Brazil case studies
In our case studies, the success of subsalt exploration and development wells depended heavily on the characterization of highly heterogeneous lacustrine microbial carbonates. Acoustic and elastic inversions have proved to be a good proxy for identification of reservoir quality variation for exploration and development well placements. However, qualitative and quantitative usage of subsalt seismic amplitudes requires proper illumination and good signal-to-noise ratio. If properly imaged, mode-converted reflections and interbed multiples can be complementary to the P-wave image. But, in conventional P-wave-oriented imaging, both types of events cannot be imaged correctly. They appear as coherent noise and negatively impact the overall exploration and development project outcomes, especially in areas with poor illumination. This paper consists of two parts: first, we investigate the potential problems resulting from converted waves and interbed multiples in data from two different basins — the Gulf of Mexico and the Campos Basin in offshore Brazil — and show our approach to attenuate them to reveal the true structures. The second part focuses on advanced identification of interbed multiples in modeling and migration methods. To facilitate the various strategies to attenuate interbed multiples, “interpretation” of the various events plays a significant role. Vertical seismic profile (VSP) data are excellent for the purpose; however, these data are only available at well locations, if they are recorded. As a result of many years of technology advancement, pseudo VSP data can be constructed effectively from standard streamer survey data. Two methods are highlighted in this paper for building pseudo VSP data in a full two-way sense, based on a typical Brazil-type salt model: Marchenko-based processing and full-wavefield migration. Major subsalt plays in the Gulf of Mexico and emerging plays in Brazil should benefit significantly from elimination of these kinds of coherent noise.
- 31 August 2017
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 5 (3) , 1-2
Introduction to special section: Least-squares migration
- 31 August 2017
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 5 (3) , 1-2
Introduction to special section: Least-squares migration
- 31 August 2017
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 5 (3) , SN1-SN11
A guide to least-squares reverse time migration for subsalt imaging: Challenges and solutions
Least-squares reverse time migration (LSRTM) overcomes the shortcomings of conventional migration algorithms by iteratively fitting the demigrated synthetic data and the input data to refine the initial depth image toward true reflectivity. It gradually enhances the effective signals and removes the migration artifacts such as swing noise during conventional migration. When imaging the subsalt area with complex structures, many practical issues have to be considered to ensure the convergence of the inversion. We tackle those practical issues such as an unknown source wavelet, inaccurate migration velocity, and slow convergence to make LSRTM applicable to subsalt imaging in geologic complex areas such as the Gulf of Mexico. Dynamic warping is used to realign the modeled and input data to compensate for minor velocity errors in the subsalt sediments. A windowed crosscorrelation-based confidence level is used to control the quality of the residual computation. The confidence level is further used as an inverse weighting to precondition the data residual so that the convergence rates in shallow and deep images are automatically balanced. It also helps suppress the strong artifacts related to the salt boundary. The efficiency of the LSRTM is improved so that interpretable images in the area of interest can be obtained in only a few iterations. After removing the artifacts near the salt body using LSRTM, the image better represents the true geology than the outcome of conventional RTM; thus, it facilitates the interpretation. Synthetic and field data examples examine and demonstrate the effectiveness of the adaptive strategies.
- 31 August 2017
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 5 (3) , SN1-SN11
A guide to least-squares reverse time migration for subsalt imaging: Challenges and solutions
Least-squares reverse time migration (LSRTM) overcomes the shortcomings of conventional migration algorithms by iteratively fitting the demigrated synthetic data and the input data to refine the initial depth image toward true reflectivity. It gradually enhances the effective signals and removes the migration artifacts such as swing noise during conventional migration. When imaging the subsalt area with complex structures, many practical issues have to be considered to ensure the convergence of the inversion. We tackle those practical issues such as an unknown source wavelet, inaccurate migration velocity, and slow convergence to make LSRTM applicable to subsalt imaging in geologic complex areas such as the Gulf of Mexico. Dynamic warping is used to realign the modeled and input data to compensate for minor velocity errors in the subsalt sediments. A windowed crosscorrelation-based confidence level is used to control the quality of the residual computation. The confidence level is further used as an inverse weighting to precondition the data residual so that the convergence rates in shallow and deep images are automatically balanced. It also helps suppress the strong artifacts related to the salt boundary. The efficiency of the LSRTM is improved so that interpretable images in the area of interest can be obtained in only a few iterations. After removing the artifacts near the salt body using LSRTM, the image better represents the true geology than the outcome of conventional RTM; thus, it facilitates the interpretation. Synthetic and field data examples examine and demonstrate the effectiveness of the adaptive strategies.